Help with SRM certification

I am planning to give SRM certification exam in the middle of December 2007 . I have SR210 (Version 4) material . I do not have any sample questions/ cheat sheets that may help me with the certification.
Any help from SRM forum experts on this aspect will be much appreciated. ( E-mail id : [email protected])
Thanks much

Disha :
For some reason, I didn't receive the documentation you sent. I checked the junk folders too
Will it be possible for you to send the documentation again to [email protected] ?
My apologies for any inconvenience caused and thanks much for your willingness to help
Uday

Similar Messages

Need help with XI certif for technical consultant

Hi XI experts ,
I am trying for certif for Development Consultant SAP NetWeaver u201904 - Exchange Infrastructure & Integration Technology - C_TBIT44_04 .
Can somebody please give me some sample questions and answers?
I really will appreciate such help since I donu2019t have any idea what kind of questions are at the exam!
I only have heard it is not an easy exam to take.?Is this true?
Also any shared experienced will be appreciate it. If you have, please give me more hands on information , not just course numbers and syllabus.
Looking forward to receive info from you. Please use emal contcts in my Business Card.
Thanks in advance all!
Jim

HI,
Yes its true ...any SAP certification is never ever be the easy stuff...that could be easily achievable....
You need to be well prepare for the Certification. There are many SDN links available for sample questions. you can just search on SDN as well as on Internet.
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8
1. SAP XI Certification - Important Topics
2. Regarding XI Certification Material.
3. Xi sample Certification questions
XI certification passing used to be normally 65%. It may vary based on the runtime exam rules.
There are marks as well as no of questions allocated for every section, so you may refer below link
you can go to the following site and check the information.
https://service.sap.com/%7Esapidp/011000358700005902252004E
https://service.sap.com/~sapidp/011000358700003595762004E
SAP XI Certification - Important Topics All about XI certification
Thanks
Swarup

SRM CERTIFICATION HELP REUIRED

Hi Experts,
i am going to take SRM certification this year .
Can any one provide me the SRM materials SRM210 / TSRM10 (SAP Enterprise Buyer Configuration) it would be very helpfull for me ..Please do advice me how to to Focus on it.
My Email ID : [email protected]
helpfull answers will be rewarded with highest points..
Thanks,
Henry.

Hi ,
I am a beginner and I would like to know more details about how and where to start for SRM 5.0 certification.I have completed the SRM210 training and I have nearly 1.3 yrs of working experience related to SRM.
Awaiting more information regarding the same as I am planning to take the certification @ SAP Teched '07.
If someone can send me the materials and more information about the certification details , it would be of great help.
Regards,
Kalyan

Need Help with Windows 7 Certifications Manager - Can't log on easily

I have to do a complete restore of my 7 Windows Home Premium OS. I downloaded all of the drivers, got everything up and running, but now whenever I use Firefox, the only browser I utilize, I always get the pop-up caution box that states "Do you want to allow the following program to make changes to this computer?" I looked at where the default was set for that message, and it is set according to Windows' recommendations. Even though I have good virus protection (the complete Avast version), I am not comfortable with the thought of disabling the feature completely.
I have no experience with certificates, but with the use of Windows Help, I was able to get to the program, but I found NO program with mozilla in the string.
I think the problem is with a certification, but I have never had this problem before and would very much appreciate any assistance!
Thank you,
Belle

Hello Whatsername,
BugCheckCode 10 is the decimal version of this error 0x0000000A.
Please start by trying to apply the hotfix that is listed on this Microsoft kb article
Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "S...
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

SRM certification help

Can someone send me documentation, questions for the SRM certification ?
My email address is : [email protected]
Regards.
Gianfranco.

Hi ,
I am a beginner and I would like to know more details about how and where to start for SRM 5.0 certification.I have completed the SRM210 training and I have nearly 1.3 yrs of working experience related to SRM.
Awaiting more information regarding the same as I am planning to take the certification @ SAP Teched '07.
If someone can send me the materials and more information about the certification details , it would be of great help.
Regards,
Kalyan

Questions for SRM Certification - urgent pls.

Hi Gurus,
Could anyone pls help me with SRM questions for certification.
[email protected]
thanks in advance.

Hi gurus,
I have the following questions, can someone pl. help me to clear my doubts ?
1. With EBP 3.0, the classic scenario is replaced with the extended classic scenario.
My question : Is it true ?
2. The Business Connector for exchange of data between EBP and the catalog.
What is Business Connector ? Is Business Connector means XI ?
3. The message types and BAPIs that are defined in the distribution model are later
transferred to the back-end in either synchronous or asynchronous fashion,
according to type.
Since the Model's can ONLY be distributed from EPB to back-end and regened in back-end,
I may come back with more questions, please help me out. .
If anyone have any SRM Certification questions, please pass on to me @ [email protected]
u can count on my points.
Thank you in advance.
regards,
Venkatesh Srinivasan.

SRM Certification requirements & documents

What are the eligibilities for attending SRM certification?
Can anyone please provide me with the documentation/manuals for the SRM 5.0 certification?
Thanks in advance. You will receive the points for sure.

Hello,
I am also looking for the certification material for SRM 5.0. Could any one help me out by sending the documents, i will award points.
Thanks in advance
Guna

The best way to get help with logic

I was posting in a thread on support for logic which appears to have been deleted. anyway, what I was going to say I think is useful info for people, so I'm going to post it anyway. to the mods - it doesn't contain any speculation about policies or anything like that. just an explanation of my views on the best way to deal with issues people have with logic, which I think is a valuable contribution to this forum.
I think there's a need for perspective. when you buy an apple product you get 90 days of free phone support to get everything working nice and neat. you can call them whenever, and you could actually keep them on the phone all day if you wanted, making them explain to you how to copy a file, install microsoft office, or any number of little questions no matter how simple - what is that red button thingy in my window for?.. on top of that, you've got a 14 day dead on arrival period (or 10 days I can't remember) in which if your machine has any kind of hardware fault whatsoever it's exchanged for a totally new one, no questions asked. a lot of people complain that applecare is overpriced.. and if you think of it just as an extended warranty, then it is a little pricey. but if you are someone that could use a lot of phone support, then it's actually potentially a total bargain. the fact that 2 or more years after you bought a computer, you could still be calling them every single day, asking for any kind of advice on how to use anything on the machine, is quite something. many people on this forum have had problems when they made the mistake of upgrading to 10.4.9 without first creating a system clone or checking first with their 3rd party plug in vendors to make sure it was ok. so, with apple care, you could call them and keep a technician on the phone _all day_ talking you through step-by-step how to back up all of your user data, how to go through and preserve your preferences and any other specific settings you might not want to lose, and then how to rollback to an earlier OS version.. they'll hold your hand through the whole thing if you need them to.
as for applecare support for pro apps like logic, I'd be the first person to agree that it's not great for anyone except beginners and first time users. if you look at what it takes to get even the highest level of logic certification, it's all pretty basic stuff. and logic doesn't exist in a vacuum, there is an entire universe of 3rd party software and hardware, as well as studio culture and advanced user techniques that are going to be totally invisible to some poor phone support guy at apple that did a logic 101. but it's not hard to see that apple are trying to promote a different kind of support culture, it's up to you to decide whether you want to buy into it or not.
the idea is that they are able to provide basic setup support for new users, including troubleshooting. because it's a simpler level of support, at least they can do this well. so there's no reason why any new user with say a new imac and logic can't get up and running with the 90 days of phone support they get for free.
but the thing is, for extremely high end pro users it's a different matter altogether. pro use of logic within the context of say, a studio or a film composition scenario is a very different world. it's almost a nonsense to imagine that apple could even hire people capable of giving useful support for this end of the spectrum, over the phone. there are so many variables, and so many things that require a very experienced studio person or in-work composer to even begin to understand the setup, let alone troubleshoot it. and it's a constantly evolving world, you actually have to be working in it and aware of developments on 3rd party fronts as well as changes in hardware.. not to mention even changes in the culture of studio production and the changed expectations that come from that. there's no way some poor little guy sitting at a help desk at apple can even hope to be privy to that kind of knowledge. it's already good enough that they don't outsource their support staff to india, let alone go out to studios and hire the very people with the skills that should be staying in the studio! not answering phones for apple.
so, given this reality.. companies have two choices. they can either offer an email based support ticket system, which others do. but in my opinion.. this can just be frustrating and only a half-solution. sure you 'feel' like you are getting a response from the people that make the software and therefore must know it.. but it's not really the case due to what I said above. DAWs don't exist in a vacuum, and so much of what you need to understand to help people requires an intimate knowledge of the music industry in which they are working. you still won't get that from steinberg, even if they sort of answer your emails. the other problem is that this kind of system can mean sporadic answers, a lot of tail-chasing, and quite often you won't get an answer that helps you in the end anyway.
the other model is to foster a strong user support culture. some people react in the wrong way to this idea.. they just think it's a big brush off from the manufacturer, saying we don't care, go sort it out yourselves.. but this isn't true. apple has a classification for pro resellers called 'apple solutions expert - audio'. what this means is that these dealers are recognised as audio specialists and they can receive extra support and training from apple for this. but more importantly than this.. most of them are music stores, or pro gear dealerships that are also mac and logic dealers. they already employ people that have worked or do work in the music industry, and are constantly on top of all of this stuff. apple encourages these dealers to run workshops, and to provide expert sales advice in the very niche area that logic is in, which they can do far better than some generic apple store ever could. but most importantly, they are encouraged to offer their own expert after-sales support and whatever other value-adding expertise they can, to get sales. because margins in computer gear are so tight nowadays, discounting is not really a viable option for these dealers to guarantee getting musicians to buy computers and logic setups from them. the only companies that can entice people with a lower price a big online wholesalers or big chain stores. so the best idea for these niche expert stores to get sales is to offer you their own experts to help with configuration, ongoing support and to generally make it a better idea that you bought your system from them rather than from some anonymous online store. I can see the wisdom of this.. it puts the support back out there on the ground where it's needed, and also where it can work best. apple could never hope to offer the same level of expertise in helping a film composer work through some issues with a specific interface or some highly specific issue they have with getting a task done. no big software manufacturer could do this anywhere near as well as people out there that have worked in studios or currently do work in studios. so in my opinion it's a far better model to foster this kind of support culture, along with training courses, books and training video support. also user forums like this one are possibly one of the most valuable ports of call anyone could ask for. apple couldn't replicate this with their own staff, even if they tried. and even if they made a system where some of the people close to logic development were able to answer emails, it would still be nowhere near as useful, as rapid or as capable of being up to speed with logic use out in the real world with 3rd pary gear, as any of these other methods are.
the only thing I think they could do better would be to publish a list of known bugs which are officially recognised. this would help everyone and put an end to a lot of wasted time and speculation on if something is a bug totally to do with logic, or if it's a specific issue raised by a particular configuration.
but really, in my view, a 3rd party support and training culture through a combination of specialist dealers, consultants that literally run a business setting up computers for pro-users and helping them keep it all working, online user-to-user forums and published materials really are the way forward.

In all honesty this is currently the 3rd "logicboard" (motherboard)
in my powerbook due to a design flaw regarding the 2nd memory slot....
Yep. Mine failed five weeks after I bought it. However, I bought it for work and couldn't afford being without it for four weeks while they fixed it, so I had to live with it. My serial number did not entitle me to a replacement either, post Applecare.
My firewire ports have burnt out from a third-party defective device (no hot-plugging involved)
My screen is blotchy (my PW serial number did not entitle me to a replacement).
My battery serial number did not entitle me to a replacement, and is not that good these days.
My guaranteed Powerbook-compatible RAM is actually not, causing RAM related problems, most notably these days meaning that as soon as I switch to battery power, the laptop crashes, so I can only use mains power. The company I bought it from stopped taking my calls and wouldn't replace it after they replaced it once, so I'm stuck with it. And of course, only one ram slot is working, so I can't even use my original stick in the first slot, which would shift the dodgy stuff away from the lower system area.
My power supply failed at the weak spot and caught fire. I managed to break apart the power supply and recable it so I didn't have to buy a new power supply, although the connection at the laptop end is loose (all the more fun that as soon as power is lost, the laptop crashes - see above). The power supply is held together with gaffa tape. Silver gaffer tape though, so it's still kind of 'Appley"...
My internal hard drive is dying - four or five times now it clicks and won't power up, causing the laptop to die.
One foot has fallen off (but glued back on).
The lid is warped.
The hinge is loosish.
The S-Video adaptor cable is intermittent.
But aside from all that, I have looked after it well, and I love it to death. Just as well, because it doesn't look like it will be that long...
But it still "just works". Apart from the battery power obviously. And the ram slot. And the ram. And the screen. And the hard drive. And the firewire ports. And the feet.
But everything apart from the main board, the screen, the case, the hard drive and the power supply works fine. So thats... er..
Hmm.

Windows Server 2008 R2 with multiple Roles OS Rebuild, Need help with Certificates.

Hi,
I have rebuilt a Server for my client and I require help with certificates..
I am unsure exactly what to do to get this server working as it was.
Example, The Windows Server 2008 R2 has Microsoft Exchange, DNS, DHCP, ADDS, FileServices,Network Policy and access Services and Webservices roles installed on a single box.
Since the Server OS Rebuild I am getting 2 issues that pop up usually when Outlook in opened on a client Workstation,
I have not dont anything certificate wise to the server since OS Install, and the messages I get and best described here
I seen on a backdrive, a few certificate files I dont know if we can use these files for anything but we have the following files of drive E (Backup)
e:\server.xxxx.com.au\gd_iis_intermediates.p7b
e:\server.xxxx.com.au\server.xxxx.com.au.crt
e:\ssl\2013-2018.cer
1st Message is about a Proxy certificate I dont get this often but saw it today and my client clicked ok too quickly.
I have seen it and didnt see it again after trying to close outlook and reopen
I looked up google images and tried to find it...
It's like this, (There is a problem with the proxy server's security certificate.
The security certificate is not from a trusted certifying authority.)
2nd Message is about Security Alert, Autodiscover.xxxx.com.au Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-X- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceed
[Yes][No][View Certificate ...]
3rd Message is very Close to the 2nd Message, is about Security Alert, xxxx-server.xxxx.local, Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-TICK- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceded
[Yes][No][View Certificate ...]
If you can help guide me thou this as I'm very new to setting up certificates. I had a friend tell me about something in DNS.. but he has been super busy and I want to learn what to do.
Thank-You.

Hiya,
quite a lot has the same confusions as you do, so I've written a simple explanation on the subjet of certificates
http://jesperarnecke.wordpress.com/2014/03/22/certificates-simple-explanation/
Let me know if that helps you and if you need further assistance.

How to create a document with SRM BAPIS

Dear colleagues,
I have a problem with SRM BAPIs. I need to insert a pdf document into a record using SAP BAPIs, This document is already in a table in a binary format
I am trying with these BAPIs:
    1.
          CALL FUNCTION 'BAPI_SRM_DOC_CREATE'
              EXPORTING
                rms_id                  = rms_id
                sps_id                  = sps_id
                documentid              = documentid
                description             = 'DESCRIPTION'
                do_commit               = 'X'
                documentid_check_unique = 'X'
              IMPORTING
                return                  = return
                objectid                = objectid
                documentclass           = documentclass
              TABLES
                required_properties     = required_properties.
          This BAPI is working as expected. It returns objectid for the new document.
     2. Now I'm using BAPI_RECORD_ADDELEMENT:
             ls_doc_id-objectid = objectid.
            CLEAR: ls_sp_poid. " clear weg und ls_sp_poid clearen
            ls_sp_poid-name = 'DOC_ID'.
            ls_sp_poid-value = ls_doc_id.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VARIANT'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            CLEAR: ls_doc_id.
            ls_sp_poid-name = 'VERSION'.
            ls_sp_poid-value = '0'.
            APPEND ls_sp_poid TO lt_sp_poid.
            ls_insertion_by_anchor-anchor = 'DECRET'.
            ls_insertion_by_anchor-parent_node_id = '5'.
            ls_insertion_by_anchor-parent_node_attr_name = 'DECRETAT'.
            ls_insertion_by_anchor-parent_node_attr_value = '40'.
          CALL FUNCTION 'BAPI_RECORD_ADDELEMENT'
              EXPORTING
                objectid                    = zrm_attcab_scr-phio_id
                documentclass               = documentclass
                sps_id                      = 'ZRM_SPS_DOCVAR'
                anchor                      = 'DECRETS'
                description                 = 'Descripcion'
                store_as_new_version        = 'X' "Si X se crea vacio
*               STACKED                     = ''
*               DOC_CONTEXT                 =
                element_type                = 'I'
*                 insertion_by_anchor         = ls_insertion_by_anchor
*                insertion_by_modelid        = insertion_by_modelid
*               INSERTION_BY_REFERENCE_NODE =
*              ALL_SAME_NAME_ANCHOR        = 'X'
*               SET_ELEM_DESCR_HARD         = ' '
*                omit_authority_check        = 'X'
              IMPORTING
                return                      = ls_return
              TABLES
                element_sp_poid             = lt_sp_poid.
*             ELEMENT_PROPERTIES                =
*             ELEMENT_VISIBILITY                =
         This BAPI returns an internal error
Am I following the correct steps or am I skipping anything?
Could anyone help me?
Thanks in advance!!

I have the same problem!!!
Anyone knows?
Thanks!

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

SAP eSourcing with SRM Extended Classic Scenario

Hi Team,
We are using ECC 6.0 with eSourcing. Currently we use SRM 5.0 with Classic Scenario.
Now we are planning an upgrade from SRM 5.5 to SRM 7.0 and want to do the Extended Classic Scenario. This will help us to do additional functionalities of SRM.
eSourcing can be used for Strategic RFx and CLM functionalities.
SRM can be used for SC, Operational Sourcing and PO. We can also use the SRM-SUS Scenario for PO confirmation and Invoices.
Have any one used eSourcing with SRM Extended Classic? In that case, please provide some light into how to use all these application to better streamline the overall Source to Procure strategy.
Also, do you think Classic is the way to go or Extended Classic is better? Any documents or pictures are greatly appreciated.
Thanks
Jogy

Hi
SAP provide standard integration b/w ECC and Esourcing/ CLM (PR (both inbound and outbound). However in case you decide to go with extended classic scenario,you might need e Sourcing/ CLM integration with SRM (since PO would be created in SRM) which is not provided out of the box by SAP. However custom interface (based on flat file transfer) can be built b/w SAP SRM and e Sourcing.
MM-SUS scenario is not much different from EBP-SUS scenario in terms of functionality.
Regards
Mudit Saini

ERP release for Central Contract Management with SRM 7.0 EhP 1

Hi all,
i would like to have clarification with ERP and SRM release combinations regarding SRM 7.0 EhP1.
Indeed, the "Software Component Matrix for SAP SRM 7.0 EHP1", for Operational Contract Management, tells 'EHP 5 for SAP ERP 6.0 required'.
Moreover, in RKT dealing with SRM EhP1 delta overview, ERP 6.0 with EhP5 is mandatory for an upgrade to SRM7.01.
Nevertheless, i would like to have confirmation regarding this point.
We do not want to use PI to execute the Enterprise Services for CCM. So, we intend to switch BF SRM_WSRM_1 on.
But on the ERP side (EhP5), the only BF dealing with Contract Management is LOG_MM_P2PSE_2 which description is about Service Procurement (and more exactly for item hierarchies).
Does it mean we can use SRM 7.01 with ERP 6.0 EhP4 and without PI but only if we do not use Central Contracts with service hierarchies ?
Thank you for your help.
Regards.
Laurent.

Hi Laurent,
Yes.
When Central contract was designed in SRM 7.0 with ERP EhP4, it was designed with no service hierarchy. But in SRM 7.01 Central contral was enhanced to handle service hierarchy and it works with ERP EhP5. The problem is when we have SRM 7.01 and ERP EhP4. To handle this complication SRM 7.01 was designed to send flat service lines to EhP4 and lower release even though Central contract in SRM has service hierarchy. So while transfering to ERP EhP4 system in standard, all outlines are not consider for transfer and only service lines (Functional items) are transferred to ERP. To do so user needs to maintain the backend destination information of the connected backend system in table BBP_BACKEND_DEST via SM30 transaction with correct system type (for EhP4 system it will be ERP_4.0 and for EhP5 ERP_5.0). SAP Standard program checks this while XML generation for transfer and if system type is ERP_4.0 system it removes all outlines from temp table before generating the XML data. When it is done, ERP has only service lines in its XML and it does the manupulation to create the replication of central contract.
Master Guide (Including Upgrade Information) - SAP SRM 7.01 states:
"The use of SAP NetWeaver PI is optional but it is required for outbound XML-based messaging or for connecting non-SAP planning or execution systems."
So service hierarchy is possible in SRM 7.01 and ECC 6.04 but only with PI. For other CCM functionalities, SRM 7.01 and ECC 6.04 without PI works fine.
Best regards,
Christian Zeuch

Movilizer platform (Shopping cart mobile approval) integration with SRM 7

Dear All,
I am in need of integrating the Movilizer platform with SRM 7 for shopping cart mobile approval. The details about Movilizer can be found here. - Movilizer - The Movilizer for SAP Workflow
Could you please share me your experiences/pain points which need to taken care upon the time of implementation. Thanks in advance for your help.
Best Regards,
Bharathi

Dear All,
I have a development over here where the prerequisite of integrating the Movilizer platform with SRM 7 for shopping cart mobile approval is to check the function module on Remote-Enabled.
As of SAP enhancement package 2 for SAP Supplier Relationship Management 7.0 (SAP SRM 7.0), Changes have been made to some standard function modules so that they are no longer RFC-enabled.
Please refer the below link for your reference.
consolut - Changes to Standard RFC-Enabled Function Modules ( RELNSRM_702_RFC )
If the same function module is used by Movilizer and they are no longer RFC-enabled, please do check on that. I will keep you updated on our resolution.
Best Regards,
Bharathi

Help with SRM certification

Similar Messages

Maybe you are looking for