Windows Server 2008 R2 with multiple Roles OS Rebuild, Need help with Certificates.

Hi,
I have rebuilt a Server for my client and I require help with certificates..
I am unsure exactly what to do to get this server working as it was.
Example, The Windows Server 2008 R2 has Microsoft Exchange, DNS, DHCP, ADDS, FileServices,Network Policy and access Services and Webservices roles installed on a single box.
Since the Server OS Rebuild I am getting 2 issues that pop up usually when Outlook in opened on a client Workstation,
I have not dont anything certificate wise to the server since OS Install, and the messages I get and best described here
I seen on a backdrive, a few certificate files I dont know if we can use these files for anything but we have the following files of drive E (Backup)
e:\server.xxxx.com.au\gd_iis_intermediates.p7b
e:\server.xxxx.com.au\server.xxxx.com.au.crt
e:\ssl\2013-2018.cer
1st Message is about a Proxy certificate I dont get this often but saw it today and my client clicked ok too quickly.
I have seen it and didnt see it again after trying to close outlook and reopen
I looked up google images and tried to find it...
It's like this, (There is a problem with the proxy server's security certificate.
The security certificate is not from a trusted certifying authority.)
2nd Message is about Security Alert, Autodiscover.xxxx.com.au Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-X- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceed
[Yes][No][View Certificate ...]
3rd Message is very Close to the 2nd Message, is about Security Alert, xxxx-server.xxxx.local, Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the sites security certificate.
-X- The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certificating authority
-TICK- The security certificate date is valid
-TICK- The name on the security certificate is invalid or does not match the name of the site
Do you want to preceded
[Yes][No][View Certificate ...]
If you can help guide me thou this as I'm very new to setting up certificates. I had a friend tell me about something in DNS.. but he has been super busy and I want to learn what to do.
Thank-You.

Hiya,
quite a lot has the same confusions as you do, so I've written a simple explanation on the subjet of certificates
http://jesperarnecke.wordpress.com/2014/03/22/certificates-simple-explanation/
Let me know if that helps you and if you need further assistance.

Similar Messages

Deleting print drivers on Windows Server 2008 R2 without Print Role

Hi,
I'm using Windows Server 2008 R2 with Citrix Xenapp for published desktops meaning that i need to add a number of different printers to the server for the various users. Unfortunately i have some printer drivers that i think are conflicting and want to remove
these from the server.
How can i do this without adding the Print and Document Services role? Without this role i don't believe i can access 'Print Management' in the same way that i would with a Windows 7 client and then remove the driver package.
Is there another way that i can do this or should i be adding this role just to remove these drivers and then perhaps removing the role (if necessary), assuming that this is possible?
Thanks for any help.

add the tools for print management
in elevated cmd window
dism /online /enable-feature /featurename:Printing-AdminTools-Collection
If you already have local shared prints on the server, add the role. Adding the Role installs the tools and opens the File and print sharing firewall port which would have been achieved by adding a shared printer. You do not need to add the Print
role to setup a machine as a print server, it's not a requirement.
Alan Morris Windows Printing Team

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

I just bought my MacBook Pro 13" and I tried to install an anti virus but then it went into a grey folder with a question mark I need help with restoring the iOS please

I need help taking out the grey folder with the question mark and I've try everything except the CD thing because my MacBook didn't come with one so I really need help please

What anti-virus software did you install? Although there's a lot of bad anti-virus software out there, no anti-virus software should cause such a problem. A gray screen with a flashing question mark on a folder means that no bootable system could be found, which means that the system was badly damaged or corrupt. Even installing bad software would not normally cause that, so either there was something badly wrong with the system already or the anti-virus software you tried to install was really, really bad!
As mende1 says, you need to reinstall the system at this point. After your system is back up and running, read my Mac Malware Guide. If, after reading that, you want anti-virus software, use one of the programms recommended in that guide.

Few issues with plug in's I need help with.

Hi guy's! I bought my 17" G4 powerbook yesterday and I am trying to get it setup to work on all the webpages I visit. My first issue is that on one site I was told by pop up that I needed the wmp 9 software so I went to the downloads site and dl'ed wmp9 for osx10. it was a 7mb download and once finished it told me it was not compatible with my osx.
I am running osx tiger 10.4.3
My next issue is that images in a thread did not load, only blue question marks appear. see if it happens to you in this thread: http://forums.corvetteforum.com/showthread.php?t=1241324&forum_id=34
last issue is that I got the following message:
The page “Family Guy: Peanut Butter Jelly | Funny Videos @ GKKO.COM” has content of an unspecified MIME type. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed
when I tried to view this page: http://www.gkko.com/funny-videos/1197/family-guy:-peanut-butter-jelly
I am a mac newbie so please give me the idiot version of how to fix this. Thanks a million!
g4 Mac OS X (10.4.3) powerbook 17"

Hi, lextech, welcome to Apple's user-to-user discussion forums.
I went to the downloads site and dl'ed wmp9 for osx10. it was a 7mb download and once finished it told me it was not compatible with my osx.
Are you sure you downloaded the version for OS X? Here is the download page for WMP 9 for OS X.
My next issue is that images in a thread did not load, only blue question marks appear. see if it happens to you in this thread: http://forums.corvetteforum.com/showthread.php?t=1241324&forum_id=34
The blue question marks are missing image markers. Did you try refreshing the page? This page loaded no problem for me using Safari 2.0.2 under OS X 10.4.3. This page is graphics-intensive. What kind of Internet connection do you have?
when I tried to view this page: http://www.gkko.com/funny-videos/1197/family-guy:-peanut-butter-jelly
Those movies require Windows Movie Player, so once you have that installed, it should work.
BTW, you will probably also want to install the free RealPlayer. Click on the small blue button that says "RealPlayer - Free" in the upper right corner of the page.
And it never hurts ot have a backup browser available to try sites out that don't work in Safari. There are several excellent ones available. The one I use is Firefox.
Let us know what happens and if you have more questions.

I need help with my iphone 4, i need help with my iphone 4

when i got the new ios7.1 update and when i turn it on it has pic of itunes and a charger

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery..

Foot stand not provided with my replacement WRT-350N - need help with Cisco contact

Hi!
I am starting to feel like Michael Douglas in the movie Falling Down and need some help.
Story:
I finally sent in my faulty WRT-350N router and when I got the replacement everything but the plastic foot stand was included. I want to have my router standing up to save desk space but now I have no foot.
"OK, should not be hard to get Linksys to send me the missing foot stand" was my thought. Now I have called the RMA line and also emailed them and I get a similar answer like Michael Douglas got with a smile
I keep hearing that I cannot get the part since it is not on the product's content list. Like that is *my* problem. I just want the part and do not care whether it is on a list or not. It is the part on top of the router in the picture. I even asked the Linksys representative to Google a bit for WRT-350N and there are foot stands on almost all pictures and it is definitely included in the box. I was told I could go nowhere else for help either with this. I really doubt that but fail to find a channel to Linksys that may be able to help.
If some Linksys representative sees this please help me!
Thanks, Niklas
RMA XXXXX - missing router stand/foot
(Mod note: Edited for guideline compliance. E-mail conversation removed.)
Message Edited by kent07 on 07-01-2009 03:10 AM
Solved!
Go to Solution.

Now it should be working. To moderators, this does not hold any personal info but just want to show the quite long text to read through for the RMA:
Thank you for contacting Linksys Customer Service Department. First of all, we would like to inform you that, if your item has been purchased less than 2 years ago, you have the possibility of replacing it through the place of purchase.
If you want to replace your item through Linksys, we are more than glad to provide you with our assistance. In order to create an RMA ( authorization number for the replacement under warranty), you can do it online at
https://linksysrma.moduslink.com/Consumer/pag/ChooseRegion.aspx.
On the other hand, if you prefer us placing the RMA, please reply to this email including the following information:
Name:
Last Name:
Company Name:
Street Address:
City:
Postal Code:
Day Time Phone Number:
Model (include version):
Serial Number:
Date of Purchase:
Place of Purchase (store):
Once the RMA is created, you will receive a confirmation e-mail with the RMA number on a shipping label ( not a prepaid, as the inbound shipping is up to the customer) and all the terms and conditions . You will have to print three copies of that label. The first copy you are going to stick it in the outside of the box, the second one you are going to join it in the inside of the box and the last one is a copy for you as assurance. Together with this e-mail it will also be included all the terms and conditions. We will strongly appreciate your reading them carefully before sending the item to us. In relation to this, it will be our pleasure to summarize some of the important conditions we state in order to clarify our standard procedure:
Please write down the RMA# ( not the case id#) on the outside of the box with big numbers and letters. Moreover, we recommend our customers to use a traceable shipping method in order to get a tracking number for the delivery. This number will be helpful to track the package in case of any potential inconvenience. Remember that you will have to pay just for the inbound shipping while Linksys will be responsible for the rest of the expenses.
Furthermore, remember to include all the accessories that were included in the original package: Power Supply, Cables, User Guide, CD's. Otherwise, warranty replacement will not be possible to be performed. All other accessories shipped that did not come in the original box may not be returned. Moreover, it is important to remember that you do not have to ship the original box. Also, include on the shipping box a copy of the proof of purchase, not the original.
IMPORTANT: -If your product is part of a network kit just send the defective unit.
If you have further questions do not hesitate to call us or replying to this e-mail. Our lines are open from Monday to Friday from 10 a.m. to 7 p.m. We recommend our customers to have the case id# handy.
Regards,
Linksys Customer Service - EMEA
Linksys does NOT offer refunds, substitutions, credits, or upgrades.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is not able to accommodate walk-in customers.
Processing the Defective Unit.
Package your return unit(s) in one box, please make sure the contents are secure and that enough packaging material is included to prevent the unit(s) from moving around during shipping.
Please ship the defective unit(s) to the address below.
Linksys RMA/SILS/ML
IJsseldijk 29 in Apeldoorn
7325 WZ Apeldoorn
The Netherlands
All original Linksys accessories, such as power adapters, couplers/dongles, and antennas MUST BE RETURNED with the product.
If you are replacing a product that belongs to a networking kit, only return the defective product listed on the previous web form belonging to the networking kit. Please do not include the working product.
Linksys is NOT responsible for lost packages in transit. Please obtain a tracking number as a safeguard for your shipment. Linksys strongly suggests using a reputable shipping company that will provide a tracking number and will insure the package.
Linksys is NOT responsible for lost or damaged personal accessories. If you have attached any accessories that did not come with the original product, please remove these items prior to returning your unit(s). In addition, if your product uses any internal fiber modules please also remove these items unless they are listed as one of the products on the RMA web form.
Linksys is not responsible for data stored on the hard drive of the defective unit. If the defective unit has a hard drive and it cannot easily be removed form the defective unit, backup your data prior to shipping the defective unit to Linksys.
The customer bears the cost of sending the defective unit(s) to Linksys including all customs fees and applicable taxes.
A COPY of the proof of purchase must be included for all products. A valid proof of purchase includes a copy of the receipt, invoice, or packing slip from the retailer, or distributor. A copy of your credit card statement, internal requisition, or purchase order is NOT considered a valid proof of purchase. DO NOT SEND YOUR ORIGINALS.
Processing the Replacement Unit.
Linksys bears the cost of shipping the replacement unit to the CUSTOMER unless the expedited shipping option is chosen at the time the RMA is created.
Upon receipt of the defective unit, a replacement unit is usually shipped within 3-5 business days
Linksys ships replacement products via GLS ground to customers within the European Union. Non European Union Customer's replacements are shipped FedEx.
In the event of a backorder, units will ship when available, and the shipping method will remain the same as the option selected at the time the RMA was created.
If you wish to change the shipping method, YOU MUST contact the Linksys Customer Service department prior to the replacement unit being shipped. Once the unit has been shipped, the funds paid for expedited shipping cannot be refunded. The Customer Service phone numbers are listed below.
Once you receive your replacement unit, test the unit, and verify that it is working properly.
Damaged or missing part(s) must be reported within five business days of receiving the replacement unit(s).
IMPORTANT: If your unit uses a power supply, make sure to use the power supply that comes with the replacement unit, and not the original power supply.
COUNTRY
PHONE NUMBER
Austria
01360 2772061
Belgium
02 627 7077
Czech Republic
800 800156
Denmark
82 332729
Finland
0800 523062
France
0800 881 026
Germany
0800 1013311
Hungary
06 80 204 548
Iceland
44 207 660 0121
Ireland
1 800 818 188
Italy
02 38 591012
Lithuania
44 207 660 0121
Luxembourg
32 2-627-7077
Malta
44 207 660 0121
Netherlands
0800 020 0101
Norway
235 00060
Poland
00800 331 1345
Portugal
213 180 081
Spain
900 902 207
Sweden
0851 992 251
Switzerland
022 5675 330
Turkey
212 444 2726
United Kingdom
0800 026 1418

I have a problem with linking media. I need help with the process

I can't seem to locate the media off my external or dropbox. I have the project file opened it's just offline and won't let me go back to locate it.

You need to ask in the forum for the program you are using
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Printing problem with Konica Minolta BizHub282 using RDP on Windows Server 2008 R2

Hello,
I have an office setup as follows: Local office IP adress scheme 192.168.201.x. There is a Konica Minolta BizHub 282 printer connected to the 192.168.201.x network as well as around 10 workstations running Windows 7. There are also about
10 additional teleworkers WHO DO NOT NEED print access to the Minolta 282. All of their data is on a cloud server. I have them setup to first connect to the cloud server using a RRAS PPTP VPN and then to start an RDP session to the separate
RDP server. The Konica Minolta works ??okay?? with the easy print services and until now, we have just dealt with the lack of features and the occasional print job that goes crazy and prints out 400 blank pages (btw, this is usually on Excel) or a job
that cuts off the margins even when you have it set to "fit to page" (this usually happens in Adobe.) When I originally set this up, I tried loading the native Konica drivers on the server, but there was no joy because I couldn't get it to
work using the native drivers. The problem at hand is a feature called "account track." This feature authenticates your print job by using an account code. If there is no code, the job just disappears. When I load the native
Konica driver, the ability to turn on this feature is greyed out (see below):
When I use easy print, the codes seem to go through, but as I mentioned earlier, sometimes the print job just goes insane. After researching this, it seems to me that there are two ways to overcome this if we can't turn off the account track feature:
1) Overcome the driver problem. I've tried both of their current drivers without success: VXL and Visual Postscript. When I login to RDP, the (redirected) Konica 282 printer is listed, but when I try to print, it fails due to the missing account track code.
I'm hoping that there is a registry hack to turn this feature on by default with the code or a driver version that works with RDP. They have a WHQL driver available, but it didn't work any better. Is there a way to report this issue to the WHQL labs? Maybe
I can light a fire under Konica's rear end and motivate them to fix the driver.
2) I saw one discussion where the guy installed the printer out in the clouds as a local printer. He seemed to have a site-to-site VPN, not a client-to-site VPN, so this worked. Is there a way to do something similar when the customer connects to the
VPN through standard "connect to workplace" setup? I tried pinging the Konica 282 from the server while logged into the VPN, but the printer could not be found.
3) I considered setting it up as a google cloud print prnter, but that would require everyone to setup a google account and add a layer of complexity.
Anyone else run into this and have a solution? If not, does anyone have any ideas on a solution or workaround?
Thanks,
Jeffery Smith

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          if ($exsSid -eq $null -or $exsSid -eq "")
          $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
          start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
        " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep Gupta

Hi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards!

Unable to print to local Printer over RDP - Windows Server 2008

Hi,
Windows 2008 Foundation R2.
Started to have issues with printing to a Local printer over RDP.
The problems started on Friday 11th April. The only possible issue I can identify is that around that time LogMeIn was updated on the server, including the LMIPrinter DLL's. I have contacted Logmein for instructions on how to uninstall LMI completely
and followed these but am still experiencing the problem.
When attempting a Test Page print the confirmation that the Test Print has been sent to is displayed and the print appears then disappears in the Print queue but nothing appears on the Local PC print queue or event logs.
On the server the Event Log shows the following error;
The document Test Page, owned by admin, failed to print on printer Canon MG7100 series Printer (redirected 2/copy 1). Try to print the document again, or restart the print spooler.
Data type: RAW. Size of the spool file in bytes: 142691. Number of bytes printed: 0. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\ONESTAGE-TS01. Win32 error code returned by the print processor: 2147500037. Unspecified
error
I have searched for possible solutions to RDP printing problems and where relevant implemented them but no change.
I have access to a second customer who uses RDP and am able to log onto that and print to my local printer so am pretty sure there is nothing wrong with the local printer or settings. On the Server with the problem the problem affects all RDP users
and all printers (including Adobe PDF printer and MS XPS printer). All printers are defaulting to the EasyPrint Drivers.
Grasping at straws I think the LMI update has banjaxed something with the RDP remote printing and an LMI uninstall hasn't fixed it. Is there a way to reinstall the RDP Printing? Would uninstalling & reinstalling .NET have that effect?

Hi,
Thank you for posting in Windows Server Forum.
What’s your client OS and RDP version in your environment?
First of all suggest you to run “sfc /scanow” with this link to check whether which file causing the issue. Check the RDP version on the RDP client computer as well as the .NET framework version with respect to the operating system used (as explained above).
Also verify that the RD Session Host / Terminal Server role is installed if the host computer is running Windows Server 2008 R2 or Windows Server 2008.
The setting “Use Remote Desktop Easy Print printer driver first” must be set to “Enabled” for Easy Print redirection, and it has to be “Disabled” for Legacy Print. For “Not configured”, Easy Print is chosen by default.
Check The Remote Desktop Configuration Tool (tsconfig.msc) settings to ensure that the “Windows Printer” option is not disabled (it is not disabled by default).
Make sure that the “Printers” check box in the client (mstsc.exe) window on the “Local Resources” tab is checked. The corresponding setting in the associated RDP file is “redirectprinters:i:1”.
More information:
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Printing on kyocera's printers wiht acrobat pro XI on windows server 2008 R2

hello there,
Most of our users work
from a TSE server with windows server 2008 R2.
Since we installed acrobat pro XI, it is impossible to print on all our Kyocera printers.
We also use HP, Konica Lexmarlk printers without problems.
Do you have a solution?
Thank for your advices.

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Windows server 2008 sp2 andoracle database 10g r2

We have created a server with windows server 2008 sp2, installing various roles, active directory, domain, dhcp server, dns server, some others, and various functionalities, and all works fine.
After all of this we are trying to install oracle database 10g, 'cause compatibiliy with an already existing db running at the moment under this database platform, using oracle universal installer, and when the launcer starts the procedure oracle database configuration assistant its windows come out and after just the 2% of the procedure it stops with ora-12560 error.
Before this not any kind of error appear.
the windows firewall security windows that appears, just 2, are unlocked by clicking the unlock button.
All seems configured right.
The listener service, oracleoradb10g_home1tnslistner, seems configured right, automatically configured from the setup procedure just before the oracle database configuration assistant, and is running.
This is the only one service created and running, at this point of the installation, from oracle.
the global database we are trying to create is named orcl, but in any place this name is found at the moment that the installation stops.
I hope that someone can help with this 'cause are 5 days that we are blocked with the installation and can't install the server in its environment.
We are desperates.

At this link
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
it says server and client for windows 2008 not just client.
Not only.
If I install this with no creation of the active directory and the domain, with all the rest, the installation work till the end without any error.
And anyway the error i reported in the first post happen the same, exactly the same point of the installation, with the 11g version too.
Waiting and hoping can be helped
Best regards.

Crystal Reports XI R2 and Window Server 2008 Hyper-V environment

Hello,
Is there any known issue that Crystal Reports XI R2 running on Window Server 2008 Hyper-V enviroment?
I tested on Development Server which is Window Server 2008 and it is working fine but when tested with another servers which are in Hyper-V enviroment and ASP.NET program keep crushing.
I got the below error on my event log:
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x03976ce8, process id 0x%9, application start time 0x%10.
Thanks,
Yin

Hi Yin,
Hyper-V I assume is the Hyper threading Intel and others enabled correct? Should not make a difference other than performance. You are still using 1 CPU so the cycles are being split between multiple programs. Not really an advantage.
Try using ProcessMonitor and search on access denied to see what is having the problem.
Other issue is CR XI R2 is not supported on windows 2008, or at least you should be running Service Pack 6 to at least get Windows 7 and Vista support, which is about the same as Windows 2008.
Go to our download page and install SP 4 full build and then SP 6. ( assuming you don't have any SP's installed ) or look in the download area and download all of the patches from SP 4 as well as the distribution files for how ever you are deploying your application.
Thank you
Don

Upgrading windows server 2003 domain controller to windows server 2008

Hello friedns :
We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
If there is a guide available for it please let me know . (Specially if there is a tip & trick)
thank you guys.
Network is my LOVE

Hi,
This TechNet online article might be helpful for you.
How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
For your convenience, I have list some general steps for your reference.
Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
General Steps:
=============
1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
2. Make the new server become a member server of the current Windows Server 2003 domain first.
3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP\adprep.exe /forestprep
4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
Drive:\sources\ADPREP \adprep.exe /domainprep
5. Insert Windows Server 2008 Installation Disc in the new server.
6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
Please refer to:
How to Verify an Active Directory Installation in Windows Server 2003
http://support.microsoft.com/kb/816106
7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
Please note: It will some time to replicate GC between DC, please wait some time with patience.
9. Disable Global Catalog on the old DC.
10. Transfer all the FSMO roles from the old DC to the new DC.
Please refer to:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
How To: Convert DNS Primary Server to Active Directory Integrated
http://support.microsoft.com/kb/816101
Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
13. Make all the clients change TCP/IP configuration to point to new server as DNS.
14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
Hope it helps.
Regards,
Wilson Jia
This posting is provided "AS IS" with no warranties, and confers no rights.

Windows Server 2008 R2 with multiple Roles OS Rebuild, Need help with Certificates.

Similar Messages

Maybe you are looking for