Help with the Update
Any help out there on how to do the upgrade? Went thorugh tutorial, but cannot get to the prompt for the download.
Message was edited by: firstpink
You have to actually click the "check for updates" button on the Summary screen in iTunes with your phone connected, and the option to upgrade will come up for you. I updated my phone before I upgraded iTunes and the phone update only took about 10 minutes for me, but it seems to be taking longer for others. I see many people saying to update iTunes before you update the iPhone, but I also see people having trouble that way.
-SB
Similar Messages
-
Need help with the update queries - joining three tables -
We have three tables shown below, each with millions of rows;
And need some updates in here;
T_CHECK->TOTAL_AMT_PAID should be equal to
aim00.t_chck_clm_xref->amt_paid + aim01.t_chck_clm_xref->amt_paid;
Some CHECK_SAK values exist in aim00.t_chck_clm_xref and some exist in aim01.t_chck_clm_xref;
We tried to update using the queries within PL/SQL shown below:
Is there a way to make these more effecient?
SQL> desc aim.t_check;
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
TOTAL_AMT_PAID NOT NULL NUMBER(11,2)
DTE_ISSUE NOT NULL NUMBER(8)
SQL> desc aim00.t_chck_clm_xref
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
AMT_PAID NOT NULL NUMBER(10,2)
SQL> desc aim01.t_chck_clm_xref
Name Null? Type
CHECK_SAK NOT NULL NUMBER(9)
AMT_PAID NOT NULL NUMBER(10,2)
create or replace PROCEDURE CHECKSUPDATE IS
cursor my_cursor is
select /*+ DRIVING_SITE(t_check) INDEX(t_check) */
tot, mid, aim.t_check.total_amt_paid from
(select sum(aim01.t_chck_clm_xref.amt_paid) tot,
aim01.t_chck_clm_xref.check_sak mid from aim01.t_chck_clm_xref
where
not exists (select 'x' from aim00.t_chck_clm_xref
where aim01.t_chck_clm_xref.check_sak = aim00.t_chck_clm_xref.check_sak
group by aim01.t_chck_clm_xref.check_sak) TABLE1, aim.t_check
where aim.t_check.check_sak = table1.mid
and aim.t_check.total_amt_paid <> tot;
my_count NUMBER;
BEGIN
my_count:=0;
for my_pos in my_cursor loop
update aim.t_check a set total_amt_paid=my_pos.tot
where a.check_sak=my_pos.mid;
my_count:=my_count+1;
if (mod(my_count,1000)=0) THEN
commit;
end if;
end loop;
commit;
END CHECKSUPDATE;>
SQL> desc t_check;
Name Null? Type
CHECK_SAK NUMBER(9)
TOTAL_AMT_PAID NUMBER(11,2)
DTE_ISSUE NUMBER(8)
SQL> desc t_chck_clm_xref
Name Null? Type
CHECK_SAK NUMBER(9)
AMT_PAID NUMBER(10,2)
SQL> desc t_test
Name Null? Type
CHECK_SAK NUMBER(9)
AMT_PAID NUMBER(10,2)
select check_sak, sum(amt_paid)
from (
select check_sak, amt_paid from t_chck_clm_xref
union all
select check_sak, amt_paid from t_test
group by check_sak;and use this query in an UPDATE statement or a MERGE statement, as Tubby suggested, against the T_CHECK table.
isotope -
hello applecare can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?
Hello John...
You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare here. -
I can't open my books with the update, says failed to load book because the requested resources is missing. Please HELP.
If you can't open a particular ibook then try deleting it from the bookshelf via the Edit button at the top right of the bookshelf, and (assuming that it's still in your country's store) redownload it via the Purchased tab in the ibookstore in the app (or if you have a copy of it on your computer's iTunes library sync it back from there).
-
After re-installation of my Premiere Elements 9.0 i have problems with the updates
I re-installed Elements 9.0 on Windows 8.1 64Bit desktop.
It all went fine.
After a while the updater service indicates i have to install following updates :
Photoshop Camera Raw 6.5 Update
Premiere Elements 9.0.1 Update
Adobe Photoshop Elements 9.0.3 Update
The updater starts downloading the updates, and when he wants to install them I get for all 3 the following message :
"Er is een fout opgetreden tijdens het downloaden van deze update. Sluit de download af en probeer het later opnieuw."
or translated
"An error occured while downloading the update. Close the download and try later agian".
Can somebody give me some advice ?
Frederik
PS. I al an Administrator user on my PCdebroyerlecho
Premiere Elements 9 on Windows 8.1 64 bit
There is no need to give up your Premiere Elements 9 because of the downloading situation which you have described. That is, unless you need video editing features that are not offered in your version. Let me give you the how to details....
1. With Premiere Elements 9 closed, download and install the 9.0.1 Update from the following link
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
2. With Photoshop Elements 9 closed, download and install the 9.0.3 Update from the following link
Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
On this one, I would suggest that you DO NOT download and install. Since its release, Barbara Brundage (expert) has
recommended no using this update.
Photoshop Elements 9.0.3 | Barbara's Sort-of-Tech Blog
3. Camera Raw 6.5
Adobe - Photoshop Elements : For Windows : Camera Raw 6.5 update for Elements 9
You should not need any more updates after the above mentioned. No further updates.
If you need any help with the Camera Raw manual install or other on this, please let me know...have been
there and done all of this before.
We will be looking forward to the outcome.
Thank you.
ATR -
Help with replicating/updating vendor master data
Hi,
Currently, we run the bbp_vendor_sync program to do the replication. It does the job of both bbpgetvd (new vendor creation) and bbpupdvd (update existing vendor).
But the problem is, we have two number ranges for vendors. One is Numeric and other one is Alpha.
Group -->AB From 0010000000 to 0699999999
Group -->AZ From A to ZZZZZZZZZZ
The vendor synchronization program can consider only one number range at a time i.e.
either Numeric or Alpha. So, we have to switch the active number range
and run the program twice., first for numeric and then for alpha.
In order to avoid this, I'm looking at implementing bbp_transdata_prep which I was told would take care of this issue.
I looked around for documentation/sample code for bbp_transdata badi and couldnt find any on SAP help site or SDN.
Wondering if someone can help with the documentation/sample code and difficuly level of implementing this BADI.
Any help would be highly appreciated and suitable points would be awarded for your help.
Also, if there is another way to solve this issue without implementing transdata badi, pls. let me know.
TIA,
SeyedHi
<u>Please go through this -></u>
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/d3b671ba67136fe10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
<b><u>Sample BADI Implementation
BADI Definition - BBP_TRANSDATA_PREP
Purpose -> Impl. for BBP_TRANSDATA_PREP, Delete Invalid Mail Addresses</u></b>
<u>PREPARE_REPLICATION_DATA method -></u>
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_REPLICATION_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
IF <LFS_ADR6>-SMTP_ADDR NS '@'.
DELETE CT_ADR6.
ENDIF.
ENDLOOP.
endmethod.
<u>PREPARE_UPDATE_DATA method -></u>
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_UPDATE_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
IF <LFS_ADR6>-SMTP_ADDR NS '@'.
DELETE CT_ADR6.
ENDIF.
ENDLOOP.
endmethod.
Hope this will help.
Regards
- Atul -
Need help with the session state value items.
I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM -
can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue
Hey damien555,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update
Scott's solution fixed the problem. It would have been helpful if the update message in the App Store had reported that. I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes. I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher. I have to come to the forum every time something happens. Why not simply have a dialogue window that opens up to explain the most likely issues? -
With the update of my iphone5 I lost features in my audiobooks. Before the chapters were listed with their descriptions - that's gone!! How come Apple?
Okay, that is the latest iOS. As far as shortcuts are concerned, they should be available. Go to Settings, General, Keyboard, Shortcuts. You should find the settings and area to enter new ones there. The area to set what numbers to receive calls from in DND mode are in Settings, Notifications, Do Not Disturb, and then then Allow Calls From.
Does this help? -
Help with this update statement..
Hi everyone,
I am trying to update a column in a table .I need to update that column
with a function that takes patient_nbr and type_x column values as a parameter.
That table has almost "300,000" records. It is taking long time to complete
almost 60 min to 90 min.
Is it usual to take that much time to update that many records?
I dont know why it is taking this much time.Please help with this update statement.
select get_partner_id(SUBSTR(patient_nbr,1,9),type_x) partner_id from test_load;
(it is just taking 20 - 30 sec)
I am sure that it is not the problem with my function.
I tried the following update and merge statements .Please correct me if i am wrong
in the syntax and give me some suggestions how can i make the update statement fast.
update test_load set partner_id = get_partner_id(SUBSTR(patient_nbr,1,9),type_x);
merge into test_load a
using (select patient_nbr,type_x from test_load) b
on (a.patient_nbr = b.patient_nbr)
when matched
then
update
set a.partner_id = get_partner_id(SUBSTR(b.patient_nbr,1,9),b.type_x);
there is a index on patient_nbr column
and the statistics are gathered on this table.Hi Justin,
As requested here are the explain plans for my update statements.Please correct if i am doing anything wrong.
update test_load set partner_id = get_partner_id(SUBSTR(patient_nbr,1,9),type_x);
"PLAN_TABLE_OUTPUT"
"Plan hash value: 3793814442"
"| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |"
"| 0 | UPDATE STATEMENT | | 274K| 4552K| 1488 (1)| 00:00:18 |"
"| 1 | UPDATE | TEST_LOAD | | | | |"
"| 2 | TABLE ACCESS FULL| TEST_LOAD | 274K| 4552K| 1488 (1)| 00:00:18 |"
merge into test_load a
using (select patient_nbr,type_x from test_load) b
on (a.patient_nbr = b.patient_nbr)
when matched
then
update
set a.partner_id = get_partner_id(SUBSTR(b.patient_nbr,1,9),b.type_x);
"PLAN_TABLE_OUTPUT"
"Plan hash value: 1188928691"
"| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |"
"| 0 | MERGE STATEMENT | | 274K| 3213K| | 6660 (1)| 00:01:20 |"
"| 1 | MERGE | TEST_LOAD | | | | | |"
"| 2 | VIEW | | | | | | |"
"|* 3 | HASH JOIN | | 274K| 43M| 7232K| 6660 (1)| 00:01:20 |"
"| 4 | TABLE ACCESS FULL| TEST_LOAD | 274K| 4017K| | 1482 (1)| 00:00:18 |"
"| 5 | TABLE ACCESS FULL| TEST_LOAD | 274K| 40M| | 1496 (2)| 00:00:18 |"
"Predicate Information (identified by operation id):"
" 3 - access("A"."patient_nbr"="patient_nbr")"Please give some suggestions..
what's the best approach for doing the updates for huge tables?
Thanks -
While downloading the latest IOS update to my iPhone 4S, my phone went into a frozen state with the update 2/3's complete. It's remained like this for the past 12 hours. I can't turn the phone off, and I can't connect it to iTunes. Anyone know what to do?
If the place of purchase does not have a 'Lemon' policy (three replacements = refund or complete exchange), sadly you are out of luck.
And Apple themselves do not have any power over what policy a reseller uses. You can call Apple Care and have them replace it, but the odds are you would probably get a standard replacement again like has previously happened. I'm pretty sure Apple holds their own sort of 'Lemon' polocy where if it's been replaced three times through them they'll swap it out for a brand new phone. Not 100% sure though, best bet is too call them again.
And it ***** getting a response like that from their support personel, but hey, they can't all be that bad can they? I'm sure if you plead your case they'll try and help out. I've dealt with them in the past and had one or two people that rubbed me the wrong way, but most of them have been a great help and kept me a happy customer, haha.
Regards,
ThatGuy -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
I need to update my phone, but my computer broke, and do not have a new one. can I use someone else computer to go through with the update if i log on with my itunes account or Is there a chance of loosing all my data, ie: music/photos? And if all else fails can i go to the apple store and have them update my phone?
Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically. -
I just purchase a brand new mac computer and I need to purchase new adobe CS software for work. Do you know if Adobe CS5 Design Premium-Mac is compatible with new mac computers with the updated Yosemite software? *No previous adobe CS software versions are on this computer
There are known technical issues with any older version on Yosemite, even CS6. Some can be worked out, others may not be relevant to you, some will remain unsolved.
Mylenium
Maybe you are looking for
-
Using Portal for streamlining transaction entry
Hello All We have a client who would like to speak to a company that has used the portal as a "frontend" to transactional entry in ECC. This client is has a resource issue and has found that the transactions in ECC are far greater than their legacy
-
Scripting error when opening Interactive Form
Hi all, I'm experimenting with adobe interactive forms (in web dynpro), but things aren't going as expected. I'm getting scripting errors when clicking (in Internet Explorer) on a link that opens a view with an interactive form. Please see below for
-
Where can high-power video cards be installed on a first-gen Mac Pro?
I have a first-gen Mac Pro with a Radeon X1900 XT in Slot-1 and a Geforce 7300 GT in Slot-4. The x1900 XT powers a 30" monitor and the 7300GT powers 2 x 20" monitors. The 7300GT card died and is being replaced with an 8800 GT. Now it seems fairly obv
-
Auto-reconcilitation Missing matching criteria
Hi, In oracle apps 11i , manual reconcilation for bank statements is done by the user. On the attempt to try Autoreconciliation program the statement lines had the error"Missing matching criteria " in the AutoReconciliation Execution Report. I have f
-
Hi Experts, I would like know that if we merge multiple company code to one company code. then what would be legal impact and vice versa. Regards,