Help with User account on seperate drive please...

Hello... need a little help please...
I'm running 10.5.6. My boot drive is the fast, 64GB outer partition of a 5th drive on my MacPro. I used the Advanced Options in the Account pref pane in Leopard to move my Home Directory to an ultrafast 4 drive internal RAID. So far, so good.
In the past (before this bifurcated system) when I hit the road (I'm a photographer) I would just clone my boot drive which contained my User account to the MBP and go.
However now my System and User accounts are on seperate drives. I cloned the system to the MBP, but when I tried booting, it said it was unable to continue as it couldnt find the User Account. This is understandable as the User account was pointed to another drive, but the boot sequence didnt even give me a choice to create a new user account, or point the system to an existing user account on the MBP.
Seems I've got two choices. Either figure out a way to clone my System and my Home directory to the MBP, and have them recognize each other. Or give up this experiment and bring my Home directory back onto the boot drive.
Of course I could just keep a seperate system on the MBP, but find it much easier to clone the entire thing over from the MP with all my apps, settings, etc.
I'm not a UNIX junkie, but can follow instructions for using the terminal.
Can someone shed some light on this for me?
Thank you !!!!

I don't keep large files in my Home Directory. They live in another partition on the fast RAID.
But I do have lots of little ones. I'm now thinking that this is too much hassle for the small speed gain.
I'll move my home directory back to the boot drive and symlink folders if needed.
Thank you both.

Similar Messages

Unix Guru to help with User Account re-install.

I have a glitch in my main Administrator account which prevents Adobe Photoshop CS2 opening or importing files of any kind from any file.
A dialogue box tells me “Could not complete your request because of a program error.”
Adobe refers to Tech Note 331307 item 2, which offers tests and options most of which I have tried. When I establish a new User Account I am able to use Photoshop fine which suggests the Admin User Account is corrupted.
According to the tech note, my only remaining option is to re-initialize the disk and rebuild system completely. That is a very big task which I seek to avoid.
I have:
1. Run Disk Doctor over all Fonts in all folders and fixed or deleted damaged Fonts.
2. Run Disk Warrior and re-run Permissions with Xupport.
3. Opened as Single user, run fsck -f. remounted disk, moved and replaced db/netinfo and replaced AppleSetupDone. All confirmed OK but glitch remained for Photoshop CS2.
Can any Guru offer a Unix solution - or any solution, which avoids
re-formatting and building my complete system?
Alternatively, given I have many addresses and bookmarks to preserve in three browsers as well as my Mail and Address book, what is the best method by which to establish a new account and delete the old one.
Many Thanks
Mezolithic.

Hi Tony
Yes I can confirm that this doesn't wipe out address book details and Internet set-up prefs and bookmarks.
In fact putil cannot wipe out anything. It's purpose is to check the syntax of plist files or convert a plist file to another format. No conversion is taking pace here. The -s option means output is supressed, so if you don't see anything, it means there are no errors to report.
The * character means "all" , in this case all plist files.
Eg. If you wanted to list all of the document files ending in .doc, in say a Documents folder but not .txt files, you could specify *.doc. Similarly if you wanted to list all documents named reports, regardless of the extension, you would use reports.*
So that is the usage of *.
If you found this information helpful, please consider awarding stars. It is entirely up to you.
regards roam

NEED HELP WITH MY ACCOUNT!!!!!!!!!!!!

Hi, I REEEAAALLLY need help with my account, I only have one account and never made another one but it says I'm not on a administrator account, it says I have an unknown type account, and I can't figure out how to make it an administrative account, what should I do?
-Dexter

Hi, I REEEAAALLLY need help with my account, I only have one account and never made another one but it says I'm
not on a administrator account, it says I have an unknown type account, and I can't figure out how to make it an
administrative account, what should I do?
-Dexter

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means

Even I cant believe this is happening again! i'm once again asking for help with my account. Since im very sick I ask that u look into my account and read the hell verizon has put me through and assist ending the hell once and for all even if that means ending my contract, i just want the hell over. I went into my bill tonight and the mess was still there I paid $110. that's what I owe

I guess I spoke too soon! I really can't believe this nightmare is not over yet! My account is still wrong. The credit that I was due totaled $63.00 I am looking at a message on my phone saying that $21.01 was credited which makes my balance $219.72. I received a text the following day that says, I processed your credit of $30.00 and your new balance $216.73 how is that possible? None of the late fees were credited and the amount due for my monthly charges are wrong. Before any changes were made to my data plan back in Nov. My monthly charges were $140.00, I needed my hot spot back and i was told that the hot spot will increase my bill $10 for each phone that totals $20. The customer rep that change my data plan at that time also gave me a credit of $20 to compensate for the increase until I had time to talk with customer service about the mix-up with my Hot spot. I originally had the hot spot, but the rep that change my plan almost a year prior told me nothing was changing except I was getting more for less money. I explained to that rep that I need my hot spot 4 times a year...and I don't want my plan to have any changes. To verify what I'm telling u check my account and see that I called from Albany New York wanting to know where my hot spot was and I was told I didn't have the hot spot on my account since the last data change! I lost money once again due to the verizon rep's. so my current data plan the rep promised would increase $20 which makes my monthly charges that were $140 prior to the change $160 after the hot spot was returned to my account. Then I was given a $12 credit per month for 12 months because of so many mistakes made to my account so with that $12 credit my monthly charges should $148 + surcharges + taxes and that's not what I see. I do know this much right now my account is in such a shambles I can hardly see the light at the end if there is an end! I need real help!
>> Personal information removed by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

HT4199 I need help with getting my printer to print, PLEASE.

I need help with getting my printer to print, Please.

What have you done so far?
I suggest you connect it via a usb cable first. Once you get the printer working, move to wifi. You will have to use an existing printer usb cable or purchase a cable. Be sure to get the correct cable. Ask for help.
The warrenty indicates there is phone support. Give HP a call.
Warranty
One-year limited hardware warranty; 24-hour, 7 days a week phone support
Robert

MOVED: need help with my k7n2 delta series motherboard please

This topic has been moved to AMD SocketA based board.
need help with my k7n2 delta series motherboard please

"...the other memory ive been using is memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.

Help please with User Accounts in Windows on X61 Tablet PC

I kept getting the "Blue Screen of Death" and so I decided I would reformat the Hard Disk and reinstall everything. During the installation process, the User "Administrator" and my user account are both on the Welcome screen. Under User accounts, under "Administrator User" it says quote "The administrator account is only visible on the Welcome screen when no other user accounts exist (except the quest account), or when you start your computer in Safe Mode". This still is showing regardless that I have my name as a User and as administrator. Any help on getting this to not show would be great. I have a netbook with Windows XP and it just shows my name as a user and under user accounts just my name and guest. Thanks for the help.
G

You are right, can only have one open. You have to log out of a user before logging in to another user to use iTunes. Do not use the fast user switching ability of Windows.

Need some help with getting mail folders into Maverick please???

I have finally gotten my old Snow Leopard files transferred to Maverick partition on my hard drive but my mail did not pull over the old saved mailboxes with saved emails. How can I get those old saved emails into Mavericks so I can quit using Snow Leopard all together? The top picture below are my mailboxes you can see in Snow Leopard on the left of the screen (seems to have copied over the mail in my in-box but not my saved mailboxes. the second picture is what shows in Maverick. Can someone direct me on how to get my saved emails to Maverick please? All help is greatly appreciated and make the instructions simple, not real tech savy so need exact instructions. Thanks so much for any and all help:
Also, is there any way to not group mail from the same person/company in a folder? Can't seem to find in preferences where you can get each email on a separate line. For instance if I get several emails from Apple Support it groups them into one folder and I would just as soon have them all listed separately in mail. Thanks again, Gary

I couldn't have done any of this without the excelletn support from you Andy. You were patient with me and your assistance will never be forgotten. Thank you is not enough. I was so confused and now more aware of what is going on. I wasn't familiar with users vs. partitions I guess and was swiveling and seeing different things than when restarting and couldn't figure out what was going on. Again, thank you for your patience, and excellent skills to get me on the road to using Maverick. THANK YOU!!!

Help, hidden user account trouble need help

i tried to create a hidden user account using the tuturial on : http://www.macosxhints.com/article.php?story=20080127172157404&query=hidden%2Bus er%2Baccount
when i did it i restarted my computer and at login the account i created appeared i went on it then switched to my regular account and when i switched my regular account settings where messed up, first off the colour of everything on the screen was lighter than it should be and fast user switching which i had enabled was now disabled and when i enable it it doesnt work and if i close system prefs then re open it shows fast user switching off, i logged off so i could switch to the new one and when i logged on as the new one the colors where fine but i had caouple other problems, in this account fast user switching was enabled and so i switched to my original account where the problems from before still existed. i tried deleting the account by terminal typing: sudo dscl . delete /users/hidden
hidden is what i named the new account by the way. now o restarted the computer and when the login screen came up it no longer showed the new account (named hidden) so i logged onto my original account but upon logging on the problems are back.
someone please help. i dont want to but if i have to i will restore my mac but i need someone to tell me how and how to back up everything
if you dont want to go to the link this is the terminal code i originally typed to create the user account
sudo dscl . create /Users/$USERNAME
sudo dscl . create /Users/$USERNAME PrimaryGroupID 0
sudo dscl . create /Users/$USERNAME UniqueID 0
sudo dscl . create /Users/$USERNAME UserShell /bin/bash
sudo dscl . passwd /Users/$USERNAME $PASSWORD
sudo dscl . append /Groups/admin GroupMembership $USERNAME
--i replaced '$username' with hidden (the username i chode)
and i replaced '$password' with the password i chose
please through in any idea you have i am desperit!

also i downloaded the thing on that page that says "i wrote a small script to automate the process, which you can get here" (here is a link)
the download did nothing
(that i know of)
again any help would be greatly appricated

Having issues with users accounts

When I log in , any application that I try to log into, I have to right click on it and select RUN AS ADMINISTRATOR, this doesn't matter what account I am in. I also just got locked out of my administrator account. It told me user profile
not available.
How can I fix this?

Hi Jcc1128,
When did the issue start to occur ?Have you made any modifications to the machine ?
Have you tried to create another administrator account and login with it to have a check ?
Please open an administrator command line and run the following command line to enable the built-in administrator account .Then login with this account to have a check .
"net user administrator /active:yes"
If the issue has gone ,the present account profile may have corrupted .Please refer to the following link to fix the corrupted user profiles .
Fix a corrupted user profile
http://windows.microsoft.com/en-hk/windows/fix-corrupted-user-profile#1TC=windows-7
After we resolved the issue ,please run "net user administrator /active:no" to disable the built-in account .
If there is something wrong with the built-in account profile ,the isssue may be worse.We can run "sfc /scannow" to have a check of the system files` health firstly. Just as S.Sengupta suggested , we also can try a system restore .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Need some help with backing up external hard drive using Time Machine

Hi all, I'm trying to work out the best way to back up multiple iPhoto libraries using Time Machine.
At the moment I have got an iMac and Macbook Pro, both of which have an iPhoto library (with different content). Currently these are not backed up at all. So what I want to do is back both up to an NAS drive, which I know is straightforward.
What I also want to do is create one iPhoto library on an external hard drive that I can use with my MBP, and then delete the iPhoto library on my MBP to free up some hard drive space (it's running slower and slower and I'm hoping that this might help it run quicker).
So, as I want to have the library on two seperate drives in case one fails, what I want to know is whether I could use Time Machine to back up my external hard drive as well as the internal drive of my MBP? Also, would I need to have the external drive connected at all times for Time Machine to "see" it?
I hope that makes sense, all I seem to be doing currently is going round and round and can't work out whether what I want to do is possible or not.
Thanks in advance

If I understand your goal correctly, you're considering using Time Machine as external storage, and it doesn't work that way. Time Machine keeps around what it can, and older stuff gets flushed as the storage available to Time Machine reaches its lower threshold due to the addition of newer stuff. When the older stuff gets flushed is not predictable.
It is possible to have several Time Machine backups aimed at the same target (this can be done with Apple Time Capsule, for instance), though you might want to partition the disks to ensure that the intended amount of storage is available. Different NAS drives have different features here.
NAS is only as fast as your network connection, and that's almost always much slower than the in-box I/O connections; a local disk will be far faster than a NAS disk, just because of the bottleneck that is wired gigabit Ethernet, and most WiFi is slower and sometimes far slower than wired gigabit Ethernet. FWIW.
If your MacBook Pro is old enough and you have $$ but aren't in a position to spend $$$$$ on a newer model, then consider an in-place drive upgrade.
If your network connection is fast enough to transfer the amount of data you're dealing with in a reasonable time, there are also hosted storage options.
You can use a NAS drive as storage independent of Time Machine, and relocate stuff there. (You'll still want to have backups of that data, as NAS drives — even NAS with RAID — can still lose files, become corrupted or otherwise ruin your data day.
As for your performance, keeping about 10% or so free on the disks is the local preference, but it's worth reviewing the performance of the whole system — Performance Monitor, Console.app, etc — to see if there's something else going on, or if your system load and personal performance expectations are exceeding what your MacBook Pro can provide.

Help on User account?

Hi hi,
im having problems with my office system thats running on Tiger.
what happened was i start-up one morning and realised that my desktop
items, including wallpaper are all gone. like a brand new installed system.
but then i go to my HD->Users i found my user folder there and all my files and folders
are inside. I have no idea what went wrong and how do i set it back to default, starting up with
that account of mine. *note that i checked under system pref-> accounts, but theres only 1
account...
Need help urgently. Hope to get help soon.
Thank you. =(

[Recover from renaming your Home folder|http://www.thexlab.com/faqs/renamehomerecovery.html]
[My home folder and desktop are different than before|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1952.html]
[Return to Default Desktop, Apparent Loss of Home Directory|http://docs.info.apple.com/article.html?artnum=107854]

Problems With User Account? Try Resolving Font Conflicts!

After installing SL as an upgrade, one of my user accounts could not install software, switch to the other account, or do anything where the system would ask for the account password.
I tried resolving this by doing several things like remove all other language keyboards, deleting all files in the user/library/preferences folder, removing the user/lib/pref/byhost files, and the standard repair permisssions, etc.
I then remembered a message which said something about font conflict when first logging into that user account after the SL upgrade.
So, I went into Font Book and noticed that most of the fonts in the user category had the yellow triangle indicating duplicate copies of those fonts.
I resolved it by deleting all fonts in the user/library/font file. Those fonts were available in the computer anyway so I hope I'm not missing anything. Even still, a missing font is better than the alternative of not being able to install software and make other admin changes from the account.
I hope this helps.

I have a similar issue with both my user accounts.
Spent about 3 hours with Apple customer support and still have the issue with installing updates and everything requiering authentication.
I noticed no conflict message as you did though...

Unable to log onto domain controller with user account

Hi,
I am able to log onto my DC as domain admin. I cannot log on as myself. I do not see what I am missing in the GPO to make this happen? I am part of a server admin group and would like the server admin group to be able to log on to the domain controller to
maintain the server.
Any suggestions?
Wave~Chaser

Log on to this DC and run rsop.msc and check the following policies:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Deny log on locally
Add your self to Allow log on locally
(in default domain controller policy - as I mentioned above) and make sure your user account not belong to any group that have Deny log on locally.
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Help with [Microsoft][ODBC Microsoft Access Driver]Error in row

hi all,
it seems i have the same problem updating a field in access database here is what my access table has:
a field called userID of type String in Access 2000 on XP.
i wrote the following code in java using Eclipse 3.1.1 ( latest) to update that field:
String database= "jdbc:odbc:Driver={Microsoft Access Driver(*.mdb)};DBQ=";
String url= database + filename.trim() + ";DriverID=22;READONLY=true}";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con= DriverManager.getConnection( url,"","");
con.setAutoCommit(false);
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_UPDATABLE);
stmt.executeQuery("SELECT Users.* FROM Users");
ResultSet rs = stmt.getResultSet();
rs.moveToInsertRow();
rs.updateInt(1,"test");
rs.updateRow();
con.commit();
rs.close();
stmt.close()
con.close();
i get this error :[Microsoft][ODBC Driver Manager] Invalid cursor state
if i use the same code with using re.next(); before rs.moveToInsertRow(); i get [Microsoft][ODBC Microsoft Access Driver]Error in row
i get the errors right at : rs.updateRow();
i dont know what exactly the problem is. why doesnt it get updated and complain about it.
plz help

I'm not sure which JDBC driver you are using.
An access database, by default, has a username and
password as "admin" and "" (ie, empty password).
Actually MS Access has two methods for security. You
are referring to one of them.
If the password of admin is changed, you have to
provide the name of the workgroup information file
also( where it is stored) for making a connection.
I am not sure about the ODBC bridge driver. What iam
using is Atinav's aveConnet JDBC driver. It has
provision for giving username and passwords through
Workgroup information file. In addition to it youcan
give the database password also.
Interesting to note. The bridge for MS Access does
not use that security method. And it will fail if you
set up security using the groups/users adminstration.
The only method it allows is via the "database
password" method.Thank you for your response, but what User ID should I use when I use database password?
openConnection(URL,"xxxx","database password")
thanks again
David Ling

Help with User account on seperate drive please...

Similar Messages

Maybe you are looking for