Help with view buttons.
Hello,
I am unable to use the three view buttons in the upper right hand of screen when I am in the ipod music section. I can us them when in library but not in ipod music. I check view and the option for view list is checked, but not highlighted. Any suggestions?
Thanks in advance.
* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization
Similar Messages
-
Hello,
I need help with a button. I created a button and set it up
so that when you click and hold it, the button becomes lighter in
color (I used Alpha). I want the button to stay this light color
after i release the click. Right now it goes back to the normal
color when I release the click. Can somone help we this?
Thanks!rpofclt wrote:
> Hello,
>
> I need help with a button. I created a button and set it
up so that when you
> click and hold it, the button becomes lighter in color
(I used Alpha). I want
> the button to stay this light color after i release the
click. Right now it
> goes back to the normal color when I release the click.
Can somone help we
> this?
you can't use the button itself if you want to maintain the
DOWN state after
release as button automatically resets itself once the mouse
lives the HIT zone.
Use movie clip instead and on press simply send it to a frame
where there
is DOWN state like image.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Help with linking buttons to Scenes
Hey,
Rookie to Flash and AS3. Just needed some help with my buttons. Im making a flash program about pancakes (random I know). I have a "Mainmenu" scene and then a "Recipe" scene. I have a button on my mainmenu which takes me to the recipe page when I click it, the code behind the button is
"stop();btn_recipe.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);function mouseDownHandler(event:MouseEvent):void {
gotoAndStop(1, "Recipe");
Then when I arrive at my recipe page I have a button which will take me back to my MainMenu, the code behind that button is:
"stop();btn_home.addEventListener(MouseEvent.MOUSE_DOWN, mouse5DownHandler);function mouse5DownHandler(event:MouseEvent):void {
gotoAndPlay(1, "MainMenu");
So I run my program and the first button works and takes me to recipe page but the button to get to the main menu does nothing, click it and no response or anything
Please helpFirst, hopefully having all your code mushed onto the same line is a copy/paste error, otherwise it should look like...
stop();
btn_recipe.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
function mouseDownHandler(event:MouseEvent):void {
gotoAndStop(1, "Recipe");
If the intention is to click the buttons to make them work, then you should use CLICK instead of MOUSE_DOWN. MOUSE_DOWN can be a persistent state whereas CLICK involves releasing it afterwards.
As for the code to get you back home, where is it located on the timeline? Are you getting any error messages when you try to use it?
One thing you should learn to use is the trace() function. It is useful for troubleshooting. You can use it now to see if your second button is talking to the function at all...
stop();
btn_home.addEventListener(MouseEvent.CLICK, mouse5DownHandler);
function mouse5DownHandler(event:MouseEvent):void {
trace("the button works okay");
gotoAndPlay(1, "MainMenu");
If you don't get that message in the output panel, you'll know the button is not properly coded to work.
Most folks here will recommend you get away from using scenes in a design that includes navigation--they have a history of being problematic. Instead of using scenes, divide the one main timeline up into sections or use movieclips for the sections and manage their visibility... or do a bit of both. -
I need help with a button animation!
Hi,
I hope someone can help with a simple-looking problem which
nonetheless has me stumped!
I have a feeling that I've missed something obvious.
I've created a movie clip to act as a button (I've called it
"abs_button") and placed it on the stage.
My main movie has one frame.
Within the "abs_button" movie clip there are 5 layers.
Labels, actions, default button state, rollover state and rollout
state.
Technically, default button state, rollover state and rollout
state could be on the same layer as they don't overlap, but I've
given each animation its own layer for clarity.
FRAME 01.
Default button state is one frame with a graphic of the
button. Just a label at the start ("abs_up") and a "stop();" action
at the end.
FRAME 02 to 31.
Rollover state is a 30 frame animation. Label at start
("abs_over"), "stop()"; action at the end.
FRAME 32 to 62.
Rollout state is a 30 frame animation. Label at start
("abs_out"), "stop()"; action at the end.
All animations were achieved with tweens.
My initial "abs_button" code:
on (release) {
getURL("targetPage.htm", "_self");
on (rollOver) {
gotoAndPlay("abs_button", "abs_over");
on (rollOut) {
gotoAndPlay("abs_button", "abs_out");
As it stands, the animation jumps to frame 1 of "abs_out" on
rollout.
I need the "abs_over" animation to always play through to the
end, as the "abs_out" is "abs_over" in reverse (i.e. image grows
large on rollover and shrinks again on rollout.
I've tried for 2 days to solve this, but I clearly need help.
My experiments with variables simply didn't work.
I would be grateful if someone could tell me where I'm going
wrong!
Thanks,
Andyuse this:
on (rollOver) {
gotoAndPlay("abs_over");
Since the code is attached directly to the movieclip, you
don't have to
identify the clip. A gotoAndPlay() function takes a frame
number or a
frame label name as its argument, never the name of the clip
that
contains the frame number or name.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412.243.9119 -
Little bit of help[ with a button.
Good day all!
I need help making a button. This is what I want to happen.
I have a bunch of text, One of the words "merino" is bule as
to say there is a link hear! And I want an image of the "merino" to
come up, like a "ALT" box. Or have an image in the "ALT" box?
I know how to do this in "Flash" i.e just drop in the image
on the over state of the button event. Easy as pie! This is why I
cant get to grips with Dreamweaver! I hate it!
But I am willing to learn and maybe in time love???
Thanks all!"satrop" <[email protected]> wrote in
message
news:f0o4t7$954$[email protected]..
> Good day all!
>
> I need help making a button. This is what I want to
happen.
>
> I have a bunch of text, One of the words "merino" is
bule as to say there
> is a
> link hear! And I want an image of the "merino" to come
up, like a "ALT"
> box.
>
> I know how to do this in "Flash" i.e just drop in the
image on the over
> state
> of the button event. Easy as pie! This is why I cant get
to grips with
> Dreamweaver! I hate it!
>
> But I am willing to learn and maybe in time love???
HTML is a lot different from Flash! :-)
I believe you could do this using DW's Show-Hide layer
behavior - have
mousing over the link trigger a layer with the image to
appear. Someone else
may have a better idea.
Just FYI, having to mouse over a link in order to get more
information about
it isn't usually appreciated by users. You *might* want to
re-think this
plan..
Patty Ayers | Adobe Community Expert
www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet -
Help With Radio Buttons -- URGENT!!
Hi i am new to using UI compents in flash.
Basically i havnt a clue where to start.
Just some simple action script will help and be much
appreciated if someone can give me it.
Basically i have a question to ask which requires radio
buttons to answer the question.
I have a question and the answers are A, B, C, D.
I want:
A to equal 1
B to equal 2
C to equal 3
D to equal 4
E to equal 5
Would someone be able to tell me how to set up the radio
button so that the value of the radio button is stored into an
array called SCORE.
i dont need a tutor for arrays, i can do them, i just need
help with the radio buttons so a reference to an array would be
enough, eg how to store the answer from the radio button in an
array.
Thank youPlace the radio buttons on the stage and set their parameters
to what you need. Make sure that for each group of radio buttons
you give them the same group name. Then you could use something
like this:
var listenerObject:Object = new Object();
var answerArr:Array = new Array();
listenerObject.click = function(eventObj:Object) {
answerArr.push(eventObj.target.selectedData);
trace(answerArr);
radioGroup.addEventListener("click", listenerObject);
radioGroup refers to the group name for the buttons.
eventObj.target will refer to the actual radio button
clicked.
Tim -
Help with Social buttons ...
Hi,
I'm designing a muse site with social buttons that are created when you embed code from a site such as facebook, and others. They look like this on my site ...
I would like to build a 'social' area on my site that looks like this instead ...
So, to clarify when my user clicks on the 'f' in the lower of the two graphics above I'd like my website to behave as if the user had clicked on the 'f share' icon generated by the embedded html from facebook.
How?
Many Thanks!
GaryHi Gary
This would be a customization with codes for share.
You can use Share This and use the embed code for the same view that you have mentioned , which will allow users to share the page where you will insert the code.
http://www.sharethis.com
- Select Website
- Select the layout
- Generate the code
Thanks,
Sanjit -
Need help with encore buttons - highlights
Hi All
I am seeking help with Encode CS5. I have a project working fine except that I dont have highlights for buttons, at least I think thats what its called. So when the mouse or remote control navigates up/down toa button it changes colour.
In the properties of my button, the highlight option is greyed out.
How do I apply highlights ?
many thanks
Chris AndersonHi Bill
Thanks for your reply.
Here are 2 screen prints. One from encore the other from photoshop.
First time I have inserted images, and they seem a little small on this message - if you have any problems reading I could email to you.
I have highlighted the first button - which is called 'Highlights' - same issue with all the other buttons.
Do you have to use photoshop to add highlighting? or can you do this in encore - i dont have much experience with photoshop.
Not sure how to check 'Color Set' ? can you tell me how to get that for you - same for transparency for states? - I havent experienced them or changed them as I dont know how to
Yes it was duplicated - have left a message not to reply
Thanks again
Chris -
UWL - Help with Decision Buttons
Hello SDNers,
I'm customizing the UWL iView to show approval itens only, and their respective decision buttons.
Everything looks ok, but when someone try to submit the decisions it shows the message:
"reject wasn't correct"
Where "reject" is the name I gave to the action.
It also happens with the approval action.
Below is the XML I've created.
Does someone have a clue in what that message means, or what I've done wrong?
Thanks in advance!!Hi There,
Make sure that your decisionKeys are correct. I have seen issues with this many times. Log on to the backend system and call SAP_WAPI_DECISION_READ or SWK_DECISION READ for a specific workitem (You can get the details of the workitem id from the support information on the UWL - enable this and you can check this specific workitem) The decision key is an internal value (typically a numeric value) corresponding to the selected decision used by the provider.
You will need to ensure that you have x amount of decisions configured in the xml file, where x = the amount of decisions configured in the backend system.
For additional help with this topic please see the userDecision Action Handler documentation:
http://help.sap.com/saphelp_nw70/helpdata/en/7a/df014b037141ca9afc6433ed42b519/content.htm
Beth Maben
EP - Senior Support Consultant II
AGS Primary Support
Global Support Centre Ireland
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq *** -
I am totally new with flash. I am using the following
tutorial which I believe I followed correctly.
http://www.flash-game-design.com/flash-tutorials/advWebsite-flash-tutorial.html
I have edited the site just a bit adding my own graphics and
colors. The problem is that when you first view the site all the
buttons stay in the up position. Once you click each one once, they
function properly. Here is the script that I have.
stop()
content.gotoAndStop("home")
current = menu.home_button
setMove = true;
yMove = -10
menu.home_button.onPress = function(){
if(this != current){
current._y = 0
setMove = true
content.gotoAndStop("home")
current = this
menu.league_button.onPress = function(){
if(this != current){
current._y = 0
setMove = true
content.gotoAndStop("league")
current = this
menu.photos_button.onPress = function(){
if(this != current){
current._y = 0
setMove = true
content.gotoAndStop("photos")
current = this
menu.downloads_button.onPress = function(){
if(this != current){
current._y = 0
setMove = true
content.gotoAndStop("downloads")
current = this
menu.forum_button.onPress = function(){
if(this != current){
current._y = 0
setMove = true
content.gotoAndStop("forum")
current = this
this.onEnterFrame = function(){
if(setMove){
if(yMove < current._y){
current._y --
}else{
setMove = false
Also here is a link to the actual site that I have published.
http://67.175.252.196/New%20Site/Test%20Website.html
Any help would be greatly appreciated.I just figured it out. The buttons just needed to be moved
down below the bar. It had nothing to do with the
actionscript. -
Close Browser Window with view button element when view embedded into fpm
Hi,
is it possible to build a button into a component view which is embedded into a fpm to close the browser window?
tried to build a exit plug within the view/window of my component. But nothing happened. the window stays open
Maybe is it an option to fire the fpm close plug of the fpm from my component view embedded into the fpm?
Hope you can help me.
Using the close button of the fpm is not an option because the window should automaticaly close when clicking on a button embedded into my component view.
Kind Regards
RicoHello,
one more question.
Is it possible to change the method. so that the fpm opens within the same browser window instead of a new one?
Maybe is there a solution with the portal?
This is the Method to create a new Shopping cart. This opens a new browser window.
method /SAPSRM/IF_CLL_DOM_SCW_FIN~CREATE_NEW_SHOPPING_CART.
data:
LV_TASKCONTAINER TYPE REF TO /sapsrm/if_cll_task_container,
ls_obn_components type /sapsrm/s_wd_ui_obn,
lo_navigation_service TYPE REF TO /SAPSRM/IF_CH_WD_NAVI_SERV.
try.
LV_TASKCONTAINER = mo_parent_bo_mapper->get_task_container( ).
CALL METHOD lv_taskcontainer->GET_NAVIGATION_SERVICE
RECEIVING
RO_NAVIGATION_SERVICE = lo_navigation_service.
ls_obn_components-obn_system = 'SAP_SRM'.
ls_obn_components-object_type = 'sc'.
ls_obn_components-operation = 'shop'.
CALL METHOD LO_NAVIGATION_SERVICE->LAUNCH_TARGET
EXPORTING
IV_TARGET_TYPE = /sapsrm/if_ch_wd_navi_serv_c=>gc_target_type-obn
IS_OBN_COMPONENTS = ls_obn_components
IV_OBN_PARAM_CLASS = /sapsrm/if_ch_wd_navi_serv_c=>gc_param_class-taskcontainer
IV_OBN_PARAM_METHOD = 'GET_OBN_PARAMETERS_RM'
catch /SAPSRM/CX_PDO_ERROR_GEN.
endtry.
endmethod. -
I need help with viewing files from the external hard drive on Mac
I own a 2010 mac pro 13' and using OS X 10.9.2(current version). The issue that I am in need of help is with my external hard drive.
I am a photographer so It's safe and convinent to store pictures in my external hard drive.
I have 1TB external hard drive and I've been using for about a year and never dropped it or didn't do any thing to harm the hardware.
Today as always I connected the ext-hard drive to my mac and click on the icon.
All of my pictures and files are gone accept one folder that has program.
So I pulled up the external hard drive's info it says the date is still there, but somehow i can not view them in the finder.
I really need help how to fix this issue!you have a notebook, there is a different forum.
redundancy for files AND backups, and even cloud services
so a reboot with shift key and verify? Recovery mode
but two or more drives.
a backup, a new data drive, a drive for recovery using Data Rescue III
A drive can fail and usually not if, only when
and is it bus powered or not -
Help with Radio Buttons in Form
Hi. I have inherited a website that has a simple form. I have
been asked to edit the form adding 4 radio buttons to collect the
consumer's satisfaction with the content of the website. I have
added the radio buttons using Dreamweaver MX, however, they do not
work as I expected them to. I was under the impression that radio
buttons did not allow the user to select more than one option
because when the user selected a different option, the first option
was unselected. My form is currently allowing all four options to
be selected at the same time. The code for the form is below. I
have changed the @ in the email address of the form to prevent
possible spam. Any help would be greatly appreciated.It looks like you need to change the name= to the same on
each radio button, if they all have the same name then you can only
check one. Then click the form in the behaviors panel and be sure
the radio button name is inserting into the proper db
column. -
I'm needing a script that locks all of the fields once the submit button is pressed and it's emailed to someone else. Is that possible? Thanks in advance for your help.
Right now I'm using javascript to submit the form. I'm using
this.mailDoc({
bUI: true,
cTo: [email protected],
cSubject: ""
So I need to incorporate the script you gave me with this script that I'm already using? -
Help with submit button remove null value
Hello,
First of all I dont know much about java, but I wanted to create a submit button and I did alot of research. I want a button that will email some pdf files I have created in LiveCycle. So far everyting works but my code needs help.
There are a few fields I want to be place in the body of the e-mail, but if left blank I dont want null to apear on the email subject or body.
Here is what I have so far *this is a work around I like to konw the proper code.
var
strToAddress, strCCAddress, strSubject, strMessagestrToAddress
= myemail@atwork;strCCAddress
= myemail@atwork;
strSubject
= "Account "+DropDownList1.rawValue+" For: " +last.rawValue +", " +first.rawValue +" " +mi.rawValue;
if
(mi.rawValue ==null || mi.rawValue =="")strSubject = "Account "+DropDownList1.rawValue+" For: " +last.rawValue +", " +first.rawValue;
strMessage
= "Please " +DropDownList1.rawValue +" account for " +"\n"+first.rawValue +" " +mi.rawValue +". " +last.rawValue +"\n\n*All provisions in have been met" +"\n\n Comments: " +com.rawValue;
if
(mi.rawValue ==null || mi.rawValue =="")strMessage = "Please " +DropDownList1.rawValue +" account for " +"\n"+first.rawValue +" " +last.rawValue +"\n\n*All provisions in have been met" +"\n\n Comments: " +com.rawValue;
event.target.submitForm({cURL
:"mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage,cSubmitAs:"PDF",cCharset:"utf-8"});
//this.resolveNode("#event").submit.target = "mailto:"+ strToAddress + "?cc=" + strCCAddress + "&subject=" + strSubject + "&body=" + strMessage;
The 4 fields am working on are First name, last name, Mi and comments. First and last are alwasy used, but if MI is not I dont want Null in there, with what I have above it works but its messy. I wanted to do the same with Comments if its left blank I like for it to read "Comments: None" not null
on the If statement I just re did the whole deal with out the mi.rawvalue but i now that is not right way... any help would be great.
ThanksI believe that you should re-post this in either the Forms or the Designer forum. You are more likely to get the right folks to look at it there.
Generally this forum is for building custom Document Service Component (DSC) plugins that extend the LiveCycle ES server side product.
Maybe you are looking for
-
Help! Getting error in Entourage. Error 18588??
Hi, I am trying to send an email to a group I've set up and every time I try to send, I get a message saying an unknown error 18588 occurred. I tried sending the same email to myself at another email address and it worked. It doesn't seem to want to
-
Auto-recovery mechanism(S) of oracle database???
Hi, I read that if the database is closed abnormally, say to power failure, then once the database is re-opened, the RECO foreground process will recover all transactions that were in-doubt, that is neither commited or rolled back, how does it do???
-
Safari 4.1.3 won't start up.
Hello, Details: 1 Ghz Power PC G4, 1 GB SDRAM, OS 10.4.11 Safari 4.1.3 After an optimisation run (by TechToolPro 4.6) Safari won't start up. Until now it did very well. Downloaded a new version, deleted the old one. It didn't start up after installin
-
General problems with CC!
My troubles started in Dec 2012. A paid normally my subscription, but on the website it viewed like my subscription is expired and I have 30 days to renew it. I manually paid the following bill, the transaction was success and received the correct bi
-
I have one Query. I execute this query against two clients and then i check the execution plan against these queries. Against one client query used index and against one client it used full table scan. Why full table scan and why used index i need cl