Here is a solution for Captivate swallowing the first syllable of spoken text

It happens occasionaly to me, using Captivate 8, that text which was generated by the text-to-speech feature is not fully audible when the slide is displayed (even in a preview!).
I found the following solution for it:
Go to the problematic slide
In the top menu, click Audio | Edit | Slide
Position the red Playhead cursor at the audio's start
Click the "Insert silence" icon (the right-most icon under the Edit menu-item)
A small pop-up window shows "insert 1 sec. at Playhead position". Click OK.
Click Save.
Now when you replay the slide, there is a good chance that the first syllable of the text is audible.
Nathan
the Netherlands

Yop, Swing version >= Swing 1.1.1 Beta 1
has this feature, add HTML to JButton, JLabel, JToolTip ... etc
And default JTree, JTable use JLabel renderer ==> so by default JTree, JTable also can use HTML too.
And the furture of Swing will make Menu Item can set HTML text.
:-)))

Similar Messages

Hi, my iPhone is an American company and sprint, wanted to know if here you release it for use in the company telcel ?

Hi, my iPhone is an American company and sprint, wanted to know if here you release it for use in the company telcel ?

Apple doesn’t remove the carrier lock on iPhones. Ask Sprint if they will.
(125549)

WHATS THE FIRST STEP TO ADDING TEXT TO YOUR NEW WEB SITE?

WHAT'S THE FIRST STEP TO ADDING TEXT/CONTENT TO MY NEW WEB SITE?

Create a new file of the HTML type. (CTRL-N). Then type or paste text.
Images you add to your new site must first be included in the site folder. Then you can drag and drop them.

Here is a solution for BEX analyzer NW04S layout - setFilterStyle

Hi all,
I had a problem with a workbook that contains multiple sheet with differebts queries.
The problem was, that the filter panel had the same style on each sheet. And like the number of charactéristics are different for each quey, the layout was not well.
To correct this :
- I have modify the 'setFilterStyle' macro   and now, the filter panel is displayed correctly on each sheet.
I hope this solution will be able to help you ...
Regards,
Martine
Here is the modified macro:
'--- Reformat the Filter Area with the correct stlyes
Sub setFilterStyle()
Dim i As Integer
Dim lRange As Range
Dim lsheet As Worksheet
On Error Resume Next
'i = 16
'Calculate Filter-Area
'While Sheet4.Cells(i, 3) <> ""
'   i = i + 1
'Wend
'Filter Area
For Each lsheet In ThisWorkbook.Worksheets
    i = 16
    While lsheet.Cells(i, 3) <> ""
        i = i + 1
    Wend
If lsheet.Range("C14").Value = "Filter" Then
    Set lRange = Range(lsheet.Cells(15, 3), lsheet.Cells(i - 1, 4))
    lRange.ClearFormats
    With lRange.Borders(xlEdgeBottom)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlEdgeRight)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
     With lRange.Borders(xlEdgeRight)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlEdgeLeft)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
     With lRange.Borders(xlEdgeTop)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlInsideVertical)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    lRange.Interior.ColorIndex = 2
End If
Next lsheet
' No more filter Area
For Each lsheet In ThisWorkbook.Worksheets
    i = 16
    While lsheet.Cells(i, 3) <> ""
        i = i + 1
    Wend
If lsheet.Range("C14").Value = "Filter" Then
'Calculate Filter-Area
    l_old = i
    While lsheet.Cells(l_old, 3) = "" And l_old <= 200
        l_old = l_old + 1
     Wend
     Set lRange = Range(lsheet.Cells(i, 3), lsheet.Cells(l_old - 1, 4))
     lRange.ClearFormats
End If
Next lsheet
End Sub
'--- Service Function to get the Name Object back
Private Function getName(i_name As String) As Name
   Dim l_name As Name
     For Each l_name In ThisWorkbook.Names
        If l_name.Name = i_name Then
            Set getName = l_name
        End If
     Next l_name
End Function

Hello,
You can set the default workbook as the SAP standard provided.
To do this, please open the BExAnalyzer and goto the
"Global settings" screen (Its on the BExAnalysis Toolbox menubar).
In the "Select Default workbook" tab click on the "Use SAP Standard"
button.
This would set the default workbook. Close Analyzer and reopen it.
It should work fine.
Some additional information for you:
The default workbook that is used can be seen in table RSRWBTEMPLATE.
Check the workbook that is assigned to your user. If there is a blank
workbook assigned to your user, this uses the SAP Standard Global
Wokrbook. If your user iD doesn't exist in this table, then it will use
the workbook assigned to the <blank> user id. If the <blank> user id is
assigned to <blank> workbook, this means that any user id that doesn't
have an entry in this table will be use the global workbook. Don't make
any manual updates to this table, but it can be used to see who is
assigned to what workbook. You should specify using the standard workbook
for your user id through the properties in the BEx Analyzer. Ensure that
the entry is updated in this table. Also, you will need to close BEx
Analyzer and log back on to see the change.
Regards,
Manjunath

The BEST solution for gmail on the iPhone

OK, so after much poking around, I finally figured out the best solution for using gmail on the iPhone: IMAP support.
While I think Google is still rolling this out to all users, once you get it, USE IT! It basically keeps your mail app synced with gmail, and even supports the use of folders/labels.
To see if your gmail account is ready for IMAP, go to the settings option in gmail and see if one of the tabs says "Forwarding and POP/IMAP." If you don't have IMAP available on your account yet, it won't say IMAP.
Here's some links to get you started:
setting up IMAP for gmail on your iPhone:
https://mail.google.com/support/bin/answer.py?answer=77702
how actions in your mail app sync to gmail:
https://mail.google.com/support/bin/answer.py?answer=77657
I hope this helps out everyone as much as it's helped me. I was a little frustrated before using POP, but gotta love IMAP! I'm not too sure the impact that this has on your battery life, but so far it's working well for me. Enjoy!

Gmail and IMAP have totally change my tune about the iPhone's email abilities. I was getting frustrated with the inability to reliably get mail (Message has not been downloaded...), sync (have to delete mail from both iPhone and desktop Mac), etc., but now I have all my POP email accounts automatically forward to my Gmail account, and I only check Gmail with the iPhone and MacPro. So far, it's a whole new iPhone experience! No more errors - ALL mail comes through perfectly - and no need to manually sync!
Note that, when setting up the Gmail/IMAP accounts, do NOT simply update your old POP Gmail settings on your Mac or iPhone! Start with a FRESH new account. I couldn't get either the iPhone or Mac to work until I started with a fresh account.
Also, I was unable to send mail from the iPhone using the smtp.gmail address, so I had changed the outgoing mail setting to use my regular ISP's smtp address. But, at some point (a few minutes later or a few hours, I don't know) when I checked the Gmail settings on the iPhone, it had magically changed itself to smtp.gmail, with the port number, and it has been working perfectly ever since! Maybe IMAP can atomatically correct this info? Not sure.
One more thing. Once you have Gmail IMAP working, then you MUST go here:
http://5thirtyone.com/archives/862
Follow these directions exactly. This is a necessary set of steps in order to make your iPhone and Mac sync correctly, so that trashed mail on the iPhone will go in the trash on your desktop Mac, etc. It's pretty freaky to check email on the iPhone, and then go to your Mac Mail a few minutes later, and see all the newly trashed (or saved/read) emails perfectly synched up!
A final note. Once this is all working and synching, remember that if you delete an email on your iPhone, it gets deleted on the desktop Mac Mail as well (and vice-versa)... which is exactly what you want to happen, but I find that I have to remember to keep the mail that I want to save on the iPhone's inbox until I get back to my desktop Mac. Otherwise, I have to manually remove it from the trash to save it!

Providing DRC solution for ATMs in the enterprise network

Hi all,
I am looking for ideas on how to provide a Disaster Recovery solution for thousands of ATMs (Automated Teller Machine) deployed in the bank enterprise network. The solution should consider
the following facts:-
1.- Having the ATMs switch the connection to the Server at DRC shouldn't be automatic. This situation might last for the next few years until DRC becomes mirror image of primary data center.
2.- The ATM servers at the primary and disaster recovery center is single server equipped with high availability (Tandem). I mean to say, there is no SLBs invloved in the connection
3.- The application running on the ATMs is calling the ATM Server by hardcoded IP address in the application. The bank is willing to visit the ATMs to change once and forever.
I see source natting as the most appropriate solution, however your opanion and expertise are appreciated.
Thanks
Sami

Sami,
what kind of solution are you looking for ?
Is the concern the connection from ATM to central location ?
Or is it a concern about the server at the central location ?
For connection issues, I don't see any other solution than providing multiple lines.
If the concern is the single server, you could have a loadbalancer somewhere in your network.
The loadbalancer can use probes to check the health of the server.
If the primary fails, or is unreachable, you can automatically redirect the traffic to the standby.
ATM machines will point to the virtual ip (you could reuse the current ip and assign a new one to the servers).
Not sure where to place the loadbalancer without a better idea of the problem to solve and the network.
Gilles.

Here is a solution for Tags in Applescript

Disclaimer: Try this at your own risk, if anything goes wrong it is not my fault
I recently started programming with Applescript and thought I would try something that I miss from my Windows days. The ability to right click and choose create new text file. Mac OS X does not allow that so I turned to Applescript. I got to work. There are many people who wish to do the same as me, have a script button on the Finder Menu bar and when clicked it creates a new text file in the current folder your in, or if no Finder Window is open then the desktop.
This was easy, however I wanted to do it another way. I wanted to have a save dialog box appear that lets me enter the file name I wish to create, set any Tags and the save location. I managed to do get the file to be created as what I wanted and where I wanted. What I could not do was set Tags. I searched round and nobody seemed able to know. So I decided to keep it simple.
Here is my code
set filename to choose file name with prompt "choose file" default name "untitled.txt" default location (path to desktop) as alias
open for access filename with write permission
write filename to filename
The first line sets the variable filename to copy into it all the information gathered from the choose file name with prompt command. What I then decided to do was see what information the variable filename contained. So I wrote the last line of code, write filename to filename which I thought would copy the contents of filename and write them to the newly created file.
Thus i could open the new file and see what information had bene written to it and perhaps gleam any info that might let me figure out what command to use to set the tags etc.
I then ran the script and chose a filename to create, set the save location and a tag. Then I went to that location and found the file. I was ready to open it to see what info was written to it but instead saw the tag I had set.
I had inadvertently done what i wanted to. I now realise what i had done was tell my script to copy the contents of filename to the parameters of the newly created file. So the first thing to be copied would be the file location. That was going to be the same so it does not change it, next would be the filename that also would be the same so it is not changed and last would be the tag, there would be no tag so one is added.
Then when you go to the file you just created it would have the tag(s) you set in the choose file name with prompt dialog box
I hope this is of use to people and if you do not want to do exactly what I have done then perhaps it may give you an idea of how to achieve what you wish. I don't think that my method for doing this is the correct one and is probably a glitched way of doing it but it works and only needed one line of code so I am happy with that.
Good luck everybody
try
try
try

Disclaimer: Try this at your own risk, if anything goes wrong it is not my fault
I recently started programming with Applescript and thought I would try something that I miss from my Windows days. The ability to right click and choose create new text file. Mac OS X does not allow that so I turned to Applescript. I got to work. There are many people who wish to do the same as me, have a script button on the Finder Menu bar and when clicked it creates a new text file in the current folder your in, or if no Finder Window is open then the desktop.
This was easy, however I wanted to do it another way. I wanted to have a save dialog box appear that lets me enter the file name I wish to create, set any Tags and the save location. I managed to do get the file to be created as what I wanted and where I wanted. What I could not do was set Tags. I searched round and nobody seemed able to know. So I decided to keep it simple.
Here is my code
set filename to choose file name with prompt "choose file" default name "untitled.txt" default location (path to desktop) as alias
open for access filename with write permission
write filename to filename
The first line sets the variable filename to copy into it all the information gathered from the choose file name with prompt command. What I then decided to do was see what information the variable filename contained. So I wrote the last line of code, write filename to filename which I thought would copy the contents of filename and write them to the newly created file.
Thus i could open the new file and see what information had bene written to it and perhaps gleam any info that might let me figure out what command to use to set the tags etc.
I then ran the script and chose a filename to create, set the save location and a tag. Then I went to that location and found the file. I was ready to open it to see what info was written to it but instead saw the tag I had set.
I had inadvertently done what i wanted to. I now realise what i had done was tell my script to copy the contents of filename to the parameters of the newly created file. So the first thing to be copied would be the file location. That was going to be the same so it does not change it, next would be the filename that also would be the same so it is not changed and last would be the tag, there would be no tag so one is added.
Then when you go to the file you just created it would have the tag(s) you set in the choose file name with prompt dialog box
I hope this is of use to people and if you do not want to do exactly what I have done then perhaps it may give you an idea of how to achieve what you wish. I don't think that my method for doing this is the correct one and is probably a glitched way of doing it but it works and only needed one line of code so I am happy with that.
Good luck everybody
try
try
try

Had FF, had trouble, removed it, now it won't load at all. I download it and after 5 minutes I "click here" and it send me back to the first page.

Had FireFox and, as has happened before, I started having crashes and other issues. As before, I removed it but this time when I went to install it, nothing happens. I click to DL it and after 5 minutes, nothing happens and i click the button that says "click here" if it does not start on its own. Nothing. I am not real good on these issues, so if I missed something obvious, tell me. Thanks, Jim

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

I received an ipod touch 5th gen for Christmas. The first songs i've downloaded and synced with my touch have created ghost songs. They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play. I can't delete them

The first songs i've downloaded and synced with my new touch have created ghost songs. They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play. I can't delete them. I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod. It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?
I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

New page for group headers - the first page is blank

In the Section Expert, if you set the Group Header #1 to "New Page Before", and there is a Page Header section, the first page will show the Page Header with no further data. The rest of the report does the page breaks correct, that is, a new page every time the grouping changes.
How do you stop this blank page at the beginning?
If you assign New Page After in the Group Footer, there is a blank page at the end of the report, which is also annoying. What am I missing?
Robert

If you are using "New Page Before" then use the condition by clicking on X+2 corresponds to it and write
Not OnFirstRecord
For "New Page After" write
Not OnLastRecord
Regards,
Raghavendra.G

How to make a program that will ask for a name the first time the program is used and if is not the first time will not ask the name?

I want to make a program that will ask for the ID of the testing machine the first time the program is running, then will never ask for it. I'm using Labview 6.0

Hi
There are a Couple of methods you can use for this.
Method 1 -
You can create an ini file and save a boolean Key "First Instance" as True. Now In your Program you read this Key, If it is True then you can show your ID Dialog VI.If False do not run the VI. At the Conclusion of Id Dialog you can update this registry enrty to False. So In effect you have created One time Event. In fact you can save ID as another Config entry.
The Drawback and advantage is that such an INI file can be edited by someone moderately knowledgeable about the Program
Method 2
Use Unitialized Shift Register in A while Loop. Please see LV2 style Globals entry under this forum. You can read and write to this Variable and it retains the Value it last had within it.
You can read
this Global the Very first time and say if it true you display your ID Vi. If False you dont. When you display your ID Vi you can Update your Global Like Before.
If you need Example Let me Know.
Good Luck
Mache!!
Good Luck!
Mache

Kontext rule for formatting only the first child section in a chapter

Hi all, I have run into a DITA problem. Each chapter of the document, i.e. top-level topic, contains a miniature toc of the nested sections. Therefore the first child topic's title should receive a page break.
I tried this context rule for the title element, below you find the screenshot which I have tried to translate because the EDD is in German. Even though I define that the context should be the first parent topic only, the result is that every second-level topic now has a page break. Any ideas?
8. Count ancestors: topic
    concept
    task
    reference
    If level is: 2
      8.1 If context is: (topic{first} | concept{first} | task{first} | reference{first})
            ..then set page break.
Robert

First, regardless of the UI language, you can import element definitions from an EDD using any of the language templates. Second, you can change the template that FM uses when it creates new EDDs (from the commands that in English are labeled StructureTools > New EDD and StructureTools > Export Element Catalog as EDD). Simply copy the desired template to $FMHOME\fminit\fmstruct\elemcat where $FMHOME is the directory in which FrameMaker is installed. I recommend backing up the original first.
You can create an English EDD template from any English EDD simply by deleting all its content.
By the way, you can modify the EDD template by changing its formatting rules, master pages, and so forth. I haven't yet done so for FM 11, but see http://forums.adobe.com/thread/909395 for information on various changes I've made to the English EDD templates for previous versions.
         --Lynne

Multi-clip almost never works for me on the first attempt

Anybody know why when setting up a multi-clip, I can almost
never get it to work the first time I hit the timeline to start playing.
All my settings are correct, but either the viewer or timeline doesn't move on the first time try.
All I do is take my playhead back to the beginning of
timeline, hit play again, and usually it then starts working correctly. Sometimes I have better results if I hit the play in the Viewer instead of the Timeline, but it's not a consistent thing.
Again, I'm in open sync in Viewer and Canvas/Timeline, I'm in Unlimited RT, dynamic video quality and frame rate, multiclip activated there, turned off high quality scrubbing, ect.
I'm usually doing this with (3) short 3 minutes DV clips
on a mac book pro.
When I do get it going after the second, third or fourth attempt, I haven't changed any of the settings,...I've just confirmed that they were right to begin with.
Anybody else experience this and any ideas on how to get it to work correctly first time out?
Thanks.

so effectively it's on a different drive, sort of
But still using the same reader heads as your primary drive. So technically, it's still the same drive.
I just cut a 4 angle music video last week using my MacPro at work, and even with the source media on a FW800 G-Raid, I was still getting delayed playback and couldn't even view the 4-up display when playing back. So I moved the project to our XSAN, and with the fibre backbone there, bandwidth was definitely increased.
So the other variable in this problem is bandwidth as well as RAM. I know that a fibre based storage system isn't in everyone's budget, but I'd recommend trying out an eSATA based drive, given that I had trouble with 4 streams over FW800.

Is it possible to connect a video camera for skype on the first version of ipad?

I am trying to use Skype with a newer version of the iPad to the first version of the iPad which apparently does not have a camera. Is there any way to connect a camera to it so this can be done? Thanks!

No, I'm not aware of any webcams that are compatible with the first gen iPad. You can still use Skype, but the person with the first gen iPad won't be seen by the other person, they'll just get audio

How to Capitalize the first letter in a text field?

I have a text field of first_name and one of last_name. I want to make sure not matter what format the user inputs the the first letter is Capitalized and the rest is lower case. Can someone tell me how this is done? Thanks!

Rick4209 wrote:
I have a text field of first_name and one of last_name. I want to make sure not matter what format the user inputs the the first letter is Capitalized and the rest is lower case. Can someone tell me how this is done? Thanks!
It depends on what you want to do with the name. If this is for inserting the name in a database and you're using PHP, it's very simple:
$name = 'DaVID';
$formatted = ucfirst(strtolower($name));
echo $formatted; // outputs 'David'
This nests two functions: the inner function, strtolower(), converts everything to lowercase, and the outer function, ucfirst(), converts the first letter to uppercase.

Here is a solution for Captivate swallowing the first syllable of spoken text

Similar Messages

Maybe you are looking for