Here's my fix for Forte installer hang on WinMe.

Hi all (all those with problems anyway :) ,
(I tried to post this in the Sun ONE Studio forum
but always got an error)
I had a problem installing Sun One Studio 4 Update 1.
It would keep freezing when it started searching for
the J2SDK, with the message: "Searching for suitable
J2SDK, please wait..".
Well, here's what worked for me on WinMe. Not all of
these steps may be necessary.
Install J2SDK to "C:\j2sdk1.4.1_01". First I uninstalled
it because it was in a folder with a space in the name. I
heard that was an issue with some OS's.
Create a text file containing the text "jh=C:\j2sdk1.4.1_01".
Close it and rename it as "ffj_ce_win32_en.sp". It's appar-
ently important that its name is the same as the installer,
except for the "sp" extension of course.
Put it into the same directory with ffj_ce_win32_en.exe
( the Forte installer ).
Leave the name of the Forte installer as original (instead
of renaming it to something more descriptive for example ).
Mine was named "ffj_ce_win32_en.exe".
In C:\Windows\
Rename java.exe to java-.exe
Rename javaw.exe to javaw-.exe
The important thing here is to make sure their new names are
unlikely to conflict with the names of any other files that
might be placed there later.
Now run the installer again and make it (finally !),
After I did all the above, it immediately found the correct
folder (instead of the usual freeze-up).
Hope this helps someone else too.

Thanx!!! A frustrating hour and a half later I found your post and it worked beautifully!

Similar Messages

Here's a fix for Safari hanging and taking down the system..

There appears to be a serious bug in Mac OS X's lookupd which can pull the rug right out from under Mac OS X Tiger. While this bug could possibly be triggered in a number of different ways, there has been a recent rash of reports that have been tracked to some mainstream Web sites such as FoxNews.com using links to an adware site js.adsonar.com. This document describes a quick way out of the hang and a simple way to block links to js.adsonar.com from taking down Tiger again. While this doesn't fix the underlying lookupd bug itself, it prevents Mac OS X from hanging, while allowing you to continue using Web sites like FoxNews.com with full Java and JavaScript access enabled.
The symptoms of this problem are as follows:
You're surfing the web and the page you are on fails to completely load.
No further pages will load in your browser.
You can switch to other applications that may already be running and save any open files.
You can no longer launch any additional applications, their icons will bounce in the dock for a while and then they will just stop bouncing.
You can no longer use any other Finder functions.
You can no longer use command-option-escape to force quit.
You can not log out, restart or shut down.
Apparently these symptoms indicate that a low-level component of Mac OS X, lookupd, has hung. Since lookupd is used by many other parts of Mac OS X, it effectively hangs Mac OS X itself.
If this sounds like a problem you are having, try the steps in the following link to fix it.
Mac OS X Tiger lookupd bug & adsonar fix
Hope it helps,
-MikeS
Disclaimer:
[The above link goes to a bug fix on DreamLight.com, my commercial website. While neither I nor DreamLight receives any compensation for this fix, or for visits to the site, increased traffic to the site could of course indirectly lead to additional business opportunities.]

Hi Bee,
There is indeed "such a bug", though you may be fortunate enough to not be affected. Unfortunately MANY others are affected by this. I spent three days helping track this down (many of those 38 posts were while tracking it down in the Tiger discussions) and find a fix to this and thought that others might benefit by my efforts... By the way it's NOT a Safari bug, it happens in any browser, it's a "lookupd" bug which may be triggered by surfing to certain sites which contain links to "js.adsonar.com", which if you have JavaScript enabled can hang lookupd and take down your entire system... consider yourself lucky that it hasn't happened to you...
Here is some background information if you don't believe me:
Apple Discussions: "Fixes" for lookupd Problems, some via Java Updates
Apple Discussions: System unresponsive within the last week
MacFixit Discussions: Progressive Freeze and Network Access under Tiger
MacFixIt Special Report
MacFixit Follow-up: Another fix for system-wide freezes when Web browsing
I only posted this fix to the specific threads where people were having Safari hang, incase it might help them. Forgive me for trying to help them... I thought that was the point of these boards and that was why they started threads about their issues... I'd be willing to bet that this fix will indeed fix many of their problems...
I also posted one additional new topic here on the Safari board and one on the Tiger board for new readers looking for solutions to the same system hangs they may be getting while surfing.
If this fix does indeed help any of you other readers, please post back here so that Bee can indeed see that I'm not just posting here to waste my time...
-MikeS

Here's the FIX for one quicktime installation error

Can't believe this isn't mentioned in here anywhere or in any of the threads on the Web. I got help from the Ubergeeks on the Well, where I should have started in the first place.
If you can't install because Quicktime won't install (error -3, error 1402 etc.) and you can't get permissions to enter the registry keys...
Run: regedit
navigate to the folder mentioned in the error message. For me it was HKEYLocalMachine\Software\Microsoft\Windows\CurrentVersion\Uninstall\Quicktime
This seems to be the most often-cited culprit.
Right-click on the Quicktime folder. Select Permissions. Hit Advanced. Click the "Owner" tab. Click on yourself in the lower window. Hit OK.
Install your software and enjoy.
This may not fix everyone's problems, but I bet it fixes the vast majority of those that are similar to the one I had, which I spend hours and hours trying to fix before I simply asked someone who knew what they were doing.
Maybe if the folks at Apple see this, they can, you know, add it to their troubleshooting guide. It's a very common problem.

In case anyone is reading this thread, I found a fix for this problem. In another discussion thread, a nice person referenced an article at http://docs.info.apple.com/article.html?artnum=93865 that explains what to do with these kinds of permission errors (1402 and 1406). I followed the instructions and also made the changes to the specific line item I had a problem with. Installation ran successfully although there were a couple of error messages about not being able to unregister a couple of .dlls, which apparently is not fatal to the installation.

Fix for Safari 5 hanging up with loading pages

After reading the other extensive threads on this topic, one of the articles linked in those threads that helped me the most is found here... http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
The solution appears to be the DNS problem for many new Safari 5 users (if not most). The article linked above demystified DNS for me. I added the OpenDNS numbers in the windows entitled "DNS Server" at System Preferences > Network. Safari 5 on my computer now works at lightning speed. The added benefit to doing this is that it is much faster than my previous DNS servers, and it is more secure.
I hope that Apple will spread the word about this simple and fast solution, because many Safari 5 users are very frustrated right now.

I also have problem with hanging up freezing up and all the above and actually Safari 5 made my entire computer inclosing other browsers I use very slow now,
so I hope Apple come up with a fast fix for this soon because a lot of people have problems I have three laptops in my family my kids tonight said they have the same exact problem as far as using the DNS that you were talking about I'm afraid that I would run into some security issues I am not sure if it is something Apple would also suggest to all the people that are having this problem. I have not seen any feedback yet on open DNS

Here is A Fix for Axiom Pro control surface on Logic 9 on OSX10.10.2

here's a fix 4 problems mapping Axiom Pro to Logic 9: paste these drivers into Applications/ Logic ...right click...choose Contents/Midi plugins folder:
Axiom Pro.bundle
Axiom.bundle
If this cut and paste is non-functional ( after I click 'post')...you'll find them on the M-Audio support site...but be sure to select this newer pair of files they created on : 13/09/2011
it will probably work all the way down to osx 10.7 and maybe 10.6.8 too.
have a nice day.

That is not for Apple to fix, check with M-Audio.

Bridge CC slow? Here's a fix for some situations

Like so many of you, I have been having issues with my Adobe Bridge CS6 & Adobe Bridge CC 2014 installations both being very slow (5-10 seconds to open any context menus, folder update taking minutes, etc). Even though my machine was more than capable, something was limiting my Bridge performance.
After experimenting, I finally came up a solution that fixed it for me and others in my company.
It seemed like any action I took in Bridge was making it ping my distant network drives, which added a huge delay to any operations. I realized that this might be stemming from the fact that my company operated a Windows desktop syncing server / domain (no clue what i's actually called..) that would back up our user profiles automatically. By creating a local user and running Bridge through that (even while logged in on my main account), my performance is 1000% better.
Here's what I did:
1) While logged in on my main account, I created a new basic user on my local machine following these guidelines, writing down the username/password that I used for this new user
2) I went into "All Programs", right clicked the Bridge CC 2014 icon, and chose "Send To > Desktop (Create new shortcut)"
3) On my desktop, I right clicked the newly created Bridge icon and selected "Properties"
4) Under the "Shortcut > Target" option, I entered: C:\Windows\System32\runas.exe /user:COMPNAME\NEWUSER /savecred "C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)\Bridge.exe" (Where COMPNAME is is my computer name and NEWUSER is the username of the user I created in step 1)
5) Clicked "Change Icon..." and then "Browse", navigated to "C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)", and chose the Bridge.exe file to use as my new icon
6) Clicked OK to save the shortcut
7) Then I ran the shortcut and was prompted for the password I setup in step 1, which I entered, then hit "Enter" (it should save this from now on, due to the /savecred option we used in step 4)
Like that, my Bridge was back to performing like it did in CS5! As long as I used the new shortcut I created, my Bridge continued to work well. Using the "old" shortcuts wouldn't break anything, but Bridge would run very slowly.
Some things to note:
1) You will have to resetup ALL of your preferences/keywords panel/favorites/windows/etc for this "local" Bridge - none of your actual image files should be affected, though
2) In order to access network drives through this "local" Bridge, you will need to use "Switch User" to login as the user you created in step 1, map the network drives while logged in as that user, and then logout (and this may add the same slowness back to Bridge!)
3) Performing actions on network drives with the "local" Bridge may actually be slower using this method, which is why we now use the "local" Bridge only for local work and the original Bridge for working on a network drive
4) May make your systems administrator mad if they don't want you setting up new users..
5) Plugins/Scripts may need to be edited to work with the "local" Bridge
Here's some background on my computer:
Windows 7 Professional 64 Bit
16 GB RAM
NVIDIA Quadro K2100M 4GB
i7 4900MQ @ 2.80GHz
128GB SSD
I hope this helps other people as much as it has helped us!!

Never should have been a question - sorry.

Here's the FIX for no GUI 7.7 issue

Like many, I had the no-GUI/hang problem after upgrading to 7.7. After working with support, and fiddling around, heres the situation:
7.7 wants to touch every song in your library the first time it launches. I suspect it's updating something in the library. I have 10,000 songs, and my library is on an Airdisk, so that's a lot of traffic. Like many, I wasn't patient and killed iTunes, which may have corrupted the library.
Support indicated that there's separate problems with the software update version, so they had me reinstall from the manual download.
Fast fix (i.e. avoid it):
1) Delete iTunes.app (stop iTunes Helper in Activity Monitor). Empty the trash.
2) Download and install iTunes from www.apple.com/itunes
3) Reboot
4) Have your library attached directly to the computer (for speed)
5) The first time you run iTunes, be patient!
If you've already tried, and had to kill iTunes, here's what I did to fix it:
1) Do Steps 1-3 above
2) Move the .xml file out of your iTunes library folder (~/Music/...) to the desktop
3) Restore your iTunes library from your last good Time Machine backup prior to the 7.7 upgrade (you do run Time Machine, right?)
4) Attach your library locally!
5) Run iTunes and be patient. My locally attached library took 4-5 minutes to have the GUI come up. If you use a network it may take much longer.
Now I can close iTunes, eject the library disk, put it back on the Airport Extreme, attach that volume, and iTunes comes up like 7.6.2 did - fast and stable. Still works after rebooting too.
I'm not 100% sure if you need to restore your library from backup, but at the very least remove the XML file and give it a go.
Good luck!

Nope - and it was set to not look for them.
The final clue came when I tried hooking the drive directly to the computer, instead of to the airdisk. iTunes still hung. Then I disconnected the drive and tried to run it, and iTunes came up right away - but with an ! next to each song. Clearly it was trying to find/touch every file in the library on first startup.
I didn't try plugging in the drive and leaving the hanging iTunes running for more than a few minutes, so it's possible that it would have recovered and launched. But after removing the XML file, restoring the library to my pre-7.7 version, I could hear it accessing the directly attached drive (and see it in disk activity in the monitor) for a few minutes (less than I'd left the hanging one trying), before it came up.
Conclusion:
1) 7.7 is definitely trying to touch/see all the files in the library on first launch (proved by the ! when they are missing).
2) Disconnecting/interrupting the touch/see MAY have corrupted something (can't prove it).
3) Since touching 10,000 files takes a LONG time even at 802.11n speeds (let alone b or g), it's worth the hassle to plug the drive in directly for the first time.
4) Patience is a virtue

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

Here's a fix for uploaded files that won't play.

Is this you? You've found a lot of files were uploaded, instead of matched. Some of those files might even be on albums where other tracks matched. Sure you want them ALL to match, but meantime, it would be nice if uploaded files would actually play! Sure, you can see their names, track durations, etc. but if you try to play them directly, nothing happens and if you try to play an album through, when it gets to an uploaded track, it stalls or skips past it. You've checked the file type and it's an AAC so you figure it can't be a file encoding incompatibility problem and besides, whatever the file type, Apple is red-flagging anything incompatible, tells you it's ineligible, right?
Guess Again - not all AAC files are produced with the same encoder and some of them, while they'll get past Apple's eligibile/ineligible screening process, probably shouldn't.
I routinely record vinyl using Audacity and at various times I've used different encoders (not that I knew it until now). As a result of checking which uploaded files play and which do not, I'm pretty confident of the following. While some AAC files created outside of iTunes might work, those encoded using Lavf52.36.0 will not. Neither will files encoded using Lavf52.64.2. There may be others.
So what's the fix? The same one recommended for getting files flagged by Apple as ineligible to pass muster. You need to make an AAC copy in iTunes and swap that for the uploaded files that won't play.
Here are the steps I use to get it done. You may be able to streamline the process though.
(1) Turn off wi-fi to prevent iTunes Match from attempting to match any new files until you're good and ready. If you don't to this, you may end up with files you've just created being flagged as duplicates.
(2) Select all files in an album that has some bad uploaded files. Select Advanced > Create AAC Version. (NOTE: I don't bother trying to separate uploaded from matched, just too much hassle.)
(3) Select one of the files, so you can File > Reveal In Finder. Generally this will get you to the album folder that includes both sets of tracks. The ones you just created will have a "1" in the file name.
(4) Create a folder on the desktop and move all the newly created files to it. Delete the "1" from the file names. Name the folder based on album title.
(5) In iTunes, delete the listings for the newly created files.
(6) Turn on wi-fi and wait for iCloud to reconnect. Watch the cloud icon - it'll tell you.
(7) Delete the album from iTunes (You're now getting rid of the copy that was originally uploaded, so be sure you've really got the new AAC files handy to replace them with). Note you will see an option to delete from iCloud too. Check it. You want these files GONE!
(8) Select Store > Update iTunes Match. If you do a search for the album from an iCloud enabled iOS device (I use Apple TV) after the update is completed, you shouldn't be able to find the album.
(9) Select File > Add To Library and go get the folder of tunes you created.
(10) Run Update iTunes Match again.
(11) Watch the iTunes progress bar. Once the matching process has checked to see if you've added anything to your library, you'll see fresh copies of your songs uploading.
(12) As another means of confirmation, once several of the songs have uploaded, do an iOS device search for the album. You should be able to get the album to appear before the upload is complete. You may have to back out of the search and back in to get it to work, but chances are when you first see the album, the song titles will all be grayed out. Once the update is complete, give it a minute and everything should become available to you.
(13) Pick a track that wouldn't play before and watch to see if the timer starts to move, followed by music! It is now time to do a little happy dance.
I know this is a far cry from figuring out what it takes to get songs that should match to actually do so, but that's a whole different ball of wax.

Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean

For all you who have problems here is the fix for your phone.

Most of you on here don't understand that 3.x or if you have jailbreak your pass software and set it up from back up you are going to have problems. That can be from drop calls to not having the phone working right.
The 4.0 software has been rewritten completed for the new and old phones. So if you were on 3.x and update to 4.0 then you are bring in a bugs into 4.0. You have to set up as NEW PHONE not from back up. This clean your phone with a fresh software then you add your stuff from your computer. Then you have to go to general and go and reset your network settings. That reset your carrier account with the new 4.0. That because the new 4.0 is now looking to find the tower which has the less people on the tower not which tower is close to you. This way you get a better service and sound of it.
If you still have problems all of you with your iPhone 4 then it a hardware problem. You have to go to the Apple store and replace the phone. Apple will be happy to replace the phone. If not you have 30 days to get your full refund from Apple.
That is it. Nothing hard about it. It's a software problem of a hardware problem. BTW my new iPhone 4 is much better in sound and not having any drop calls than my old 3GS. If you have problems with drop calls is because you are in area which has a week tower which is so busy and can't keep up with the system. That a ATT problem which ATT is working hard to fix it but it can't get the equipment from their supplies fast enough to fix the problem with the network.
I hope this answer your problems on here.

I know this sounds like a bit of Voodoo, but it's worth a try. If you've upgraded to the new iPhone 4 and have restored your old software, you may see what appears to be a signal drop-off. Let's stay away from the whole iPhone 4 "death grip" controversy; that aside, no matter what you do, you're not seeing as many bars or getting reception that's as good as what you had with your older iPhone.
Here's something to try. On your iPhone preferences, navigate to "General," and then scroll down to the bottom where it says "Reset." Tap that, and then tap "Reset Network Settings." You'll get a warning, and the phone will reset to factory defaults. You'll likely lose some Wi-Fi passwords, but you may also find that your cellular reception gets a lot better.
I have two friends who tried this, and they went from one or two bars to four or five at the same locations. This is the same trick they are doing at the Genius Bar, and my research shows that it can help in many (but not all) cases. We've talked about this fix before, but we have a lot of new readers, and some old ones, who may have missed it. There are also some discussions about this on the Apple support board. If you have seen a drop-off in reception, it's certainly worth a try. If it doesn't work, we're sorry. If it does, well, the price is right for the fix. Let us know in the comments if it helped, or sadly, if it didn't.

Here's a fix for slow iPhoto 5.0.4 (burst the beachball!)

Hi all,
I've been scanning my back catalogue of photos from about the end of last year. I've never really used iPhoto before, so have no previous with earlier versions. Without a digital camera, I'm forced to use an HP scanner. Owing to the fact that the Cube only has USB 1, this is already not the fastest job in the world, but patience is on my side.
Despite the fact that I've chosen to put the iPhoto library on my ext HDD, I'm faced with one of the infuriating aspects of the HP scanning application, which is its need to put all scanned input into a folder within /home/documents on my Cube HDD. I only discovered this when I poked around after a system warning that my startup drive was nearly full.
I think this critical point caused a few permissions conflicts, because ever since, iPhoto has been screwing (that's less harsh here in the UK) my Mac. I got all the symptoms others have been complaining about with regard to slow system performance after having used iPhoto at all. This was true when switching between applications, as well as using applications after having used iPhoto, not to mention during the use of iPhoto itself. The only way to correct this degradation was with a restart, which itself would take forever, because of the slow system performance.
I had a fairly small library.iPhoto file, so was not assured that the bloat was the same as others had with certain cameras. In looking through the posts, however, I found one which suggested trashing iPhoto 5.0.4 and reinstalling version 5.0. The respondent stated that he/she was at the point of trying something 'as drastic as that'.
So I got to thinking: if the application iPhoto has caused system-wide damage, then that's the damage to treat. I did an archive and reinstall of OSX and the difference is phenomenal. So many have reported massive amounts of RAM in use, as well as GIGABYTES of swap memory. Have we forgotten the background of the Mac as a graphic artist's tool of choice?
I'm here to tell you that a properly seated operating system will run iPhoto quite happily with a gig of RAM, and whilst a 450Mhz processor won't put the fear of god into many in this day and age, it's perfectly adequate for image manipulation in iPhoto.
If you'd asked me this a week ago, I would have concurred that I obviously needed to upgrade to a G5 twin 1.8 or some such animal, but having noticed colleagues in these forums with systems that should eat this kind of workload, I'm at the conclusion (like I'm an expert) that a system reinstall should be at the beginning of the troubleshooting with such huge differences between expected and actual performance.
Go on, give it a try. What's to lose, apart from half an hour installing OSX?
Best of luck,
Matt
G4 Cube 1GB RAM/G3 iBook 640MB RAM; AirPort Express/G3 iMac Rev B 640MB RAM/iPod Mac OS X (10.4.4) iMac OSX 10.2.8

Never should have been a question - sorry.

Fix for CS5 & CS6 Hangs with Flashback Virus??

I recently found that my imac was infected with the Flashback Virus.
Ever since then, both CS5 and CS6 hang when trying to open them from Lightroom 4 or 3 using 'edit in.'
This is isolated to my imac since Lightroom 3 & 4 work as expected with CS5 & 6 with my macbook.
I have an appt with the Geniuses at the Apple Store tomorrow to delete the virus (Norton can identify it, but can't delete it. So what are they good for?).
My questions are:
1. Should I ask the experts at Apple to do anything in particular that can affect this problem, or
2. Will a simple 'uninstall'/'reinstall' for LR and CS5 & 6 be sufficient?
Recommendations from the Adobe experts will be greatly appreciated.
Chris Bernhardt

Oh well, the story continues (after I confirmed that CS5 works as expected after an 'uninstall/reinstall').
I deleted the CS6beta and then reinstalled it.
I then tried launching it from LR4 and CS6 hangs.
I then tried is from LR3 and CS6 works.
I then loaded LR4.1 and tried to launch it (all by itself) and LR4.1 hangs (never finishes loading the last photo viewed prior to quitting LR4).
I then deleted LR4.1 and reloaded LR4.0.
LR4.0 launched and it successfully launched CS5.
My conclusion - on my system there are two problems - one where LR4.1hangs and then another where CS6 hangs when trying to launch from LR4.0.
So for now, I'll continue to use LR4.0 and CS5.
I hope this helps with the development of LR4.1 and CS6.
I'll post this separately so it comes to the attention of other members of the Adobe team
Chris

Acrobat Pro X for Mac Installer Hangs

The installer never finishes the install and just hangs. Once you force quit the installer no longer allows you to intall acrobat pro X. You can't unistall either.

Acrobat Cleaner Tool
Mylenium

FIX FOR: ReadReg Application Hanging on Reb

If you are getting these errors and your computer is locking up right before you get to your desktop, follow these simple steps!?Install all the drivers as normal from the CD. Reboot when told to to finish installation. when you get that ReadReg Application and it locks up, just end the process through Task Manager. Download this :? AudigyWDMApp.rarhttp://members.driverguide.com/drive...?driverid=7795?It is an older?driver for Creative that works?Open the archi've and go into drivers?Open the file CTZAPXX.exe?UNINSTALL the driver?Reboot to finish removal?Go back to that archi've and open the CTZAPXX.exe again?Install the driver. Reboot?It will say ReadReg Application again, but it will actually finish installing.
Now it all works!?YAY!!?(At least it solved my problems)Message Edited by erickoegle on 07--200702:08 PM
Message Edited by erickoegle on 07--200702:09 PM

If you are getting these errors and your computer is locking up right before you get to your desktop, follow these simple steps!?Install all the drivers as normal from the CD. Reboot when told to to finish installation. when you get that ReadReg Application and it locks up, just end the process through Task Manager. Download this :? AudigyWDMApp.rarhttp://members.driverguide.com/drive...?driverid=7795?It is an older?driver for Creative that works?Open the archi've and go into drivers?Open the file CTZAPXX.exe?UNINSTALL the driver?Reboot to finish removal?Go back to that archi've and open the CTZAPXX.exe again?Install the driver. Reboot?It will say ReadReg Application again, but it will actually finish installing.
Now it all works!?YAY!!?(At least it solved my problems)Message Edited by erickoegle on 07--200702:08 PM
Message Edited by erickoegle on 07--200702:09 PM

Here is a Fix for AppleTV says homesharing not on after update PC

After the most recent update to Itunes my apple TV kept saying home sharing was not on even though it was. I have seen the same Q in many threads so I thought I would post what finally worked for me.
I'm on Windows 7
Wifi with Router
From your PC Start
1. Open Control Panel
2. Open Network and Sharing Center
3. Select your wireless connection
4. Click on Properties
5. Scroll down to Internet Protocol Version 6 (TCP/IPv6)
6. If it is checked, uncheck it and click ok.
7. Restart Itunes and apple tv
Hope this helps anyone having the same problem.

Finally! Thanks!

Here's my fix for Forte installer hang on WinMe.

Similar Messages

Maybe you are looking for