Heterogeneous Services & SQL Server

I understand that connecting an Oracle database to a SQL Server database can be done using the Heterogeneous Services which will set up a Transparent Gateway to the SQL Server data. Where can I get the agent needed to connect the two though? Are there different agents for different Oracle/SQL Server version combinations?
I have the paper 'Oracle8 Distributed Database Systems Release 8.0 A58247-01, Chapter 7: Administering Oracle Heterogeneous Services', and it is very helpful in getting the basics, but I need more info for my particular situation. Supposedly the agent has an Installationand User's Guide which would assist me also.

Do you have any pending statements in dba 2pc pending?
Your init parameters seems good. you need to check with the network guys for the packages sent from Oracle is received by sql server and vice versa. Hope there is no block on redirect ports.
You can enable tracing and see if you get any valid points in this direction.
As you said about trigger, look for the privileges in sql server does the user you are connecting has all the privilege on the associated tables. Also the conditions on the trigger has to be satisfied for the execution.
Also you need to add some HS parameters for the recovery in case you may need.

Similar Messages

Missing "Windows Service - SQL Server Analysis Services"

Hi
In my SharePoint 2013 Central Administration (this is a Project Server 2013 deployment), I got an alert for this error:
PowerPivot: MidTier process account should have 'Full Read' permission on all associated SPWebApplications.
After reading
this thread, I assumed I have the 2 accounts configured the wrong way, so I check
this article to see how to change the accounts, but on the section
"Change the account under which each service runs" it says to select
"Windows Service - SQL Server Analysis Services", which I can't find like as you can see in the screenshot below. How can I solve this? I'm new to this all, so if you could simplify the explanation I would be thankful, if not, I'll
just work on it anyway. :) Thanks!

Hi ,
In the process of configuring PowerPivot for SharePoint 2010, automatically select the Analysis Services for SharePoint Integration feature. After configuring PowerPivot for SharePoint 2010, we can see
SQL Server Analysis Services and SQL Server PowerPivot System Service are started on manage services on server. So you can verify whether analysis service is installed for SharePoint on manage
services on server.
More information, please refer to the links:
http://sharepointgeorge.com/2012/installing-sql-server-powerpivot-sharepointstep-step-guide/
http://technet.microsoft.com/en-us/library/855bd055-5ad3-493f-9c5b-1f5297b2e6e2(v=sql.110)
As Trevor said, for this issue, you can ignore it. Anyway, you can also check the link:
http://whitepages.unlimitedviz.com/2012/06/the-health-analyzer-and-powerpivot-for-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Reporting Services SQL Server Express 2008 R2

Hello,
Currently we are running:
10.50.1617.0 RTM
Standard Edition
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (Intel X86) Apr 22 2011 11:57:00 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
What is required to be able use the Reporting Services? Is there a cost associated? What are our choices?
Looking forward to your reply,
Linda

Hello Linda,
You have a Standard Edition (not Express, as in subject) and here are SSRS = Reporting Service as well as SSIS =Integration Services and SSAS Analysis Services included, see Feature Compare:
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).ASPX
Just add SSRS as a new feature to your existing installation, if it not already exists and setup configuration, then you can immediately use it.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Windows Azure Mobile Services - Sql Server - prebuilt columns

am I correct in assuming that tables for WAMS need to be created in the Azure management portal and have some columns precreated. Once the table is created:
is it ok to modify the columns in Visual Studio once the table has been created?
Can i just create the necessary items on my own or do I need to go through the management portal all the time?
How do i handle foreign keys and such between two tables?
Wally
MVP in ASP.NET - ASPInsider - Author - Otherwise I am a loser.

hi Wally,
Thanks for posting!
>>is it ok to modify the columns in Visual Studio once the table has been created?
yes, we could modify our sql database data on the latest version (Azure SDK 2.2 ). You could use VS 2013 and install SDK2.2 to view the data. At the same time, you will
click Add Firewall Rule and a new rule will be automatically added for you.
Please see the blog about this question (http://weblogs.asp.net/scottgu/archive/2013/10/22/windows-azure-announcing-release-of-windows-azure-sdk-2-2-with-lots-of-goodies.aspx
>>Can i just create the necessary items on my own or do I need to go through the management portal all the time?
The answer is yes . If you want to manage your SQL database by azure portal, you could find your database form
"SQL Azure", and click the "Manage" to manage your DB. Like this image:
>>How do i handle foreign keys and such between two tables?
you could handle foreign such as using SQL. Refer to this page (http://stackoverflow.com/questions/48772/how-do-i-create-a-foreign-key-in-sql-server
Hope it helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reporting Services for Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0

Hello,
We are currently running:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (Intel X86) Apr 22 2011 11:57:00 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
We would like to know what is required to configure Reporting Services for Microsoft SQL Server 2008 R2 Standard. Is their a cost associated? I need to inform our IT people what is needed.
Looking forward to your reply, Linda

Double post:
http://social.msdn.microsoft.com/Forums/en-US/3e6c5d4e-228e-4a95-b017-4c20ec61cae4/reporting-services-sql-server-express-2008-r2?forum=sqlreportingservices
Olaf Helper
[ Blog] [ Xing] [ MVP]

Automatically start SQL Agent service after SQL Server service fails and starts.

Hi!
I have SQL Server 2008 R2 with two main services - SQL Server and SQL Agent.
I'll try to describe my situation. It happens very occasionally, but sometimes SQL Server service terminates unexpectedly. It's my log:
09/13/2013 10:46:21,Service Control Manager,Error,The SQL Server (MSSQLSERVER) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
09/13/2013 10:46:21,,Error,[359] The local host server is not running,,,,
09/13/2013 10:46:22,MSSQLSERVER,Error,The MSSQLSERVER service terminated unexpectedly.,Server,1073760843,,
09/13/2013 10:46:22,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #1)...,,,,
09/13/2013 10:46:27,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #2)...,,,,
09/13/2013 10:46:32,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #3)...,,,,
09/13/2013 10:46:32,,Error,[140] AutoRestart: The MSSQLSERVER service could not be restarted after 3 attempts,,,,
09/13/2013 10:46:32,,Warning,[360] SQLServerAgent initiating shutdown following MSSQLSERVER shutdown,,,,
As you can see, SQL Server service terminates unexpectedly. Then SQL Agent service tries to start SQL Server service. After unsuccessfully attempts to start SQL Server service, SQL Agent service stops itself. I have the option setting in SQL Server
service to start itself after unexpectedly stop within 2 minutes and it is works well. But I have to start my SQL Agent service after this manually. Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly and in this case I just want
to make the settings to start both of my services SQL Server and SQL Agent automatically after this. How can I set up this? How can I make my SQL Agent service starts after SQL Server service?

Hello,
SQL server agent service depends on SQL server service so unless SQL server service comes online agent will not come online so agent is depended on SQL server not the other wise.
Now is your server 2008 R2 patched to latest service pack (SP2).If not please upgrade it to latest SP.Some fixes are there in Sp which will subside this issue.Can you paste output of
select @@version
>>Then SQL Agent service tries to start SQL Server service.No this is not the case
>>Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly
Did you checked sql server errorlog and windows event log completely.Please do so and paste if you find some more info
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error when deploy a project in SQL Server Analysis Services

Hi all, I tried deploy my project SSAS, but it send message error.
This is image before deploy myproject, it is star chema of project.
and this is the image when i try deploy it, error list.
I want to complete my project. How i can fix error list??? Help me.

Hi Anhlovevietnam,
According to the error message, it seems that the Analysis Services account lack permission to access ‘QLTICKET’. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services account,
or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, ensure the service "SQL Server Analysis Services" is running with a proper Log On As user. This user should have administrator permission on Analysis Services and the proper permissions on the database engine. To avoid this issue, you
can grant the SELECT permission for the default account for AS services to data source DB. Or you can change the services account to this domain user who has the corresponding to the data source DB.
http://jetreportskb.host4kb.com/article/AA-00238
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

SQL server (MSSQLSERVER) service

Hello,
On our production system (ECC 6.0 and sql server 2005) the service sql server (MSSQLSERVER) is running under the Local System account.
As we are gearing up for the DR Process the first basic requirement is that the SQL Server Service should run through the domain Account on both (PROD & DR) Servers.
Please tell me the steps for changing the account.
If we change the account will it affect performance of SAP application??
Please tell post processing steps also.
Regards,
Ratish

Hello,
you can change the account by
- running the SQL Server Configuration Manager
- open the properties of your SQL Server Service in the services tab
- set the domain account and
- restart the SQL Server
- repeat this for the SQL agent as well, if necessary
The performance of the SAP System will not be affected. It doesn't matter if you are running with a domain account or with a localsystem account.
Best regards
Clas

Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019

I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________

Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher"

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

Having problems connecting Coldfusion10 with sql server express 2012

Hi,
I am having problems setting up a datasource for a local sql express 2012 server. Its running as the default instance. Connections are working with ODBC and client told just not Coldfusion.
When I try to set up a connection using the sql driver I get this error:
Connection verification failed for data source: Leaf
java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: 127.0.0.1:1433. Reason: Invalid argument: connect
When I try a Socket connection with an ODBC connection I setup in windows I get this error:
Connection verification failed for data source: LeafDB
java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
The root cause was that: java.sql.SQLException: [Macromedia][SequeLink JDBC Driver]Internal network error, connection closed.
Any ideas?
Thanks,

Hi Rossco199,
The issue is likely caused by you not having yet assigned port 1433 in SQL Express itself. Follow the procedure described on the following page, and you should solve the problem: http://www.tensixconsulting.com/2012/02/sqlserverexception-the-tcpip-connection-to-the-hos t-port-1433-has-failed/
In particular, remember to assign port 1433 to 127.0.0.1 and to IPAll. Also set 'Active' and 'Enabled' to 'Yes' for the IP 127.0.0.1. While you're at it, if 'Named Pipes' is disabled, you should right-click on it and select 'enable'. Afterwards, restart the Windows service 'SQL Server(SQLEXPRESS)'.
It is advisable to allow ColdFusion server authentication. However, the SQL Express server is configured by default to allow only Windows authentication. This conflict may lead to errors.
Should you then encounter the dreaded Error 233: "No process is on the other end of the pipe", proceed as follows. Open the tool Microsoft SQL Server Management Studio. Right-click on the name of your database server, then on Properties. In the user interface that opens, click on Security. Select the combined 'SQL Server and Windows Authentication mode'. Restart the service 'SQL Server(SQLEXPRESS)'.

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Failover Cluster in SQL 2012 in not auto switch when stop service SQL

Good Morning to all,
I'm Mr.Tuyen from VietNam. I have a big problem with AlwaysOn High Availabity in SQL 2012.
I setup 3 server and join Availabilty Group. Ex: Server A (Primary), Server B (Secondary), Cluster Qourum is only node. I have test:
1. Stop service SQL server A, immediately server B is Primary
Start servicel SQL server A, Server A is secondary
2. Stop service SQL server B, server is not Primary and "status is Resloving" and role cluster failed with error as belows
[i]Clustered role 'XXX' has exceeded its failover threshold. It has exhausted the configured number of failover attempts within the failover period of time allotted to it and will be left in a failed state. No additional attempts will be made to bring the role
online or fail it over to another node in the cluster. Please check the events associated with the failure. After the issues causing the failure are resolved the role can be brought online manually or the cluster may attempt to bring it online again after
the restart delay period.[/i]
or
The Cluster service failed to bring clustered role 'XXX' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.
Do you have same error?

http://blogs.msdn.com/b/sqlserverfaq/archive/2012/03/15/inf-alwayson-the-secondary-database-doesn-t-come-automatically-when-the-primary-instance-of-sql-server-goes-down.aspx
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

SQL Server 2014 Installation Problem

I run the setup file and hit the New Standalone Installation Of SQL Server.
When i enter the license key and accept the terms of use and pass the Product Updates and Install Setup Files, i see a warning on Microsoft.NET Security ... but i know that's nothing ... i go to Installation Type and choose new installation ...
I choose all features installation and in features selection i choose whole features. and i set the installation directory the default ...I choose default instant in Instant Configuration ... In the Server Configuration i only change SQL server browser i change
it from disabled to automatic . in the Database Engine Configuration I do nothing and i go to Analysis Services Configuration i add current user to Administration permissions for analysis services ... i hit next and go to Reporting Service Configuration and
hit the Install & Configure radio button and hit next ... i add current user again ... in the Distributed Reply Client i pass the controller name & Hit next ... When i hit Install and when installation completes ... i see the an error ... Some of the
features didn't installed successfully and another warning about The specified service has been marked for deletion.
(This warning occurred when i deleted the database engine file from the previous installation folder that the new SQL is going to install in it .)
Reporting Services , Database Engine Services ,
SQL Server Replication , Quality Services and Full-Text and Semantic Extractions for Search features are
not able to install ... why ?
My Operating system is Win 7 SP1 and i have Visual Studio 2013 on my PC.
CPU : Intel Pentium Dual Core

Can you please post output of summary file it would be located at.
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log
You can use
This Link to Locate Log files
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

CDC for Oracle Continually goes to Aborted State - SQL Server 2012

I am setting up a test environment for CDC with an Oracle system. I have everything set up to the point where logs are being read and data appears to be getting added to the CDC tables in SQL Server. However, at different times during the day,
the status of the service goes to Aborted and the service is completely stopped. The first time I start the service, it will run for about 1 hour, before it aborts. After that, it only takes 2 or 3 minutes, sometimes less, before this happens again.
Below are the last entries in the log when the instance aborted. Whenever the instance aborts, the last message is always "Reading Complementary records for large log miner SQL_REDO/SQL_UNDO". I'm guessing there's a permission or setting
in Oracle that I'm missing, but I don't know what it is.
Version information:
Oracle: 10.2.0.5.0
CDC Service: SQL Server 2012 SP 1
SQL Server Database Engine: 11.0.3128
record","source","","0xDD070A00170012001C0004000043073800000000000000000626001100F8DD3A00000000061474B6B30100000100012B190000CC8E01340000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C0004004085163800000000000000000626002F00E2DD3A00000000061474B6B40100000100012B190000CCA201C40000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400C009353800000000000000000026002F00E2DD3A00000000061474B6B50100000100012B190000CCA500A00000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400408E533800000000000000000026001100F8DD3A00000000061474B6B70100000100012B190000CCAF00440000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C00040080D0623800000000000000000626002D00DBDD3A00000000061474B8780100000100012B19000108B500280000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C0004000055813800000000000000000626001500E0DD3A00000000061474B8790100000100012B19000108C7003C0000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C00040080D99F3800000000000000000026001500E0DD3A00000000061474B87A0100000100012B19000108C901140000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Enqueue transaction record","source","","0xDD070A00170012001C000400C01BAF3800000000000000000026002D00DBDD3A00000000061474B87C0100000100012B19000108D301540000000000"
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading next record","source","",""
"10/23/2013 6:28:04 PM","TRACE","ETL-BI12-01-T","RUNNING","IDLE","ORACDC000T:Reading Complementary records for large log miner SQL_REDO/SQL_UNDO","source","",""

Here are the permissions we have set up on the Oracle side: (Please forgive the poor formatting. The editor wants to remove all of the spaces and add extra carriage returns.)
GRANT
EXECUTE
ON
"SYS"."DBMS_LOGMNR"
TO
"LOGREADER";
GRANT
EXECUTE
ON
"SYS"."DBMS_LOGMNR_D"
TO
"LOGREADER";
grant
select
any
transaction
to
logreader;
GRANT
"CONNECT"
TO
"LOGREADER";
GRANT
select
ON
sys.v_$database
to
"LOGREADER";
GRANT
select
ON
sys.v_$logmnr_contents
to
"LOGREADER";
GRANT
select ON
sys.v_$logmnr_dictionary
to
"LOGREADER";
GRANT
selectONsys.v_$logmnr_logfileto"LOGREADER";
GRANT
selectONsys.v_$logmnr_logsto"LOGREADER";
GRANT
selectONsys.v_$logmnr_parametersto"LOGREADER";
GRANT
selectONsys.v_$logmnr_sessionto"LOGREADER";
GRANT
selectONsys.v_$logmnr_transactionto"LOGREADER";
GRANT
selectONsys.v_$logto"LOGREADER";
GRANT
selectONsys.v_$logfileto"LOGREADER";
GRANT
selectONsys.v_$archived_logto"LOGREADER";
GRANT
select
ON
sys.dba_registry
to
"LOGREADER";
GRANT
select
ON
sys.v_$instance
to
"LOGREADER";
GRANT
select
ON
sys.v_$thread
to
"LOGREADER";
GRANT
select
ON
sys.v_$parameter
to
"LOGREADER";
For each table we want to capture changes on, select rights have been granted to this user, as well.

Heterogeneous Services & SQL Server

Similar Messages

Maybe you are looking for