Hex to Bit Conversion and Back

How can we convert a Hex to bit and Back and what is the return datatype.
are there functions to do bitwise operations apart from bitand (I would like to perform OR,XOR,NAND operations

Hi Naveen C Ram,
For how to convert hex to rgb in Windows Phone, please try to refer to the reply posted by @Loukt in this thread:
https://social.msdn.microsoft.com/Forums/en-US/f8f695b4-9f65-4f81-aada-20daf7a16599/convert-hex-string-to-color-without-systemdrawingdll?forum=wpdevelop
For how to convert rgb to hex in Windows Phone, please try to refer to the following code:
var color = new Color() {R = 255, G = 100, B = 100};
var solidColorBrush = new SolidColorBrush(color);
var hex = solidColorBrush.Color.ToString();
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more  . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

    I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
    It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

    I just upgraded my 2008 macbook pro to OS X Maverick from Snow Leopard but my computer is running a bit buggy and slow. How do I downgrade back down to snow leopard?

    You would reinstall 10.6 using your installation DVD.
    Out of curiosity, how much RAM do you have? Recent versions of OS X really shine with 4GB or more.
    Matt

  • HT3964 I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

    I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

    Jerricayoung,
    you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen.

  • In IOS7; I am trying to delete a picture from an old text message conversation, and it keeps coming back in a second. Why?

    In IOS7; I am trying to delete a picture from an old text message conversation, and it keeps coming back in a second. Why?

    Turn off, and on your device again; and how are you deleting the picture?b From where :O

  • Weird Differences Between 32 and 64 bit Conversions

    Windows Users:
    Ever convert exactly the same raw file using exactly the same parameters into 16 bits/channel images with Photoshop CS6 32 bit and 64 bit, overlay them, set the top layer to "Differences", then add a couple of extreme curves adjustment layers over the top?
    Amazingly, there's a difference between the two conversions.
    Even more amazingly, while there's a slight correllation to the image content, there are patterns in the differences that don't really match much of anything in the image, yet they differ from raw file to raw file.
    Try it some time.  If you can't reproduce it, I'll be happy to share my raw file.
    Here are two small images, the converted raw file, and the enhanced differences between a 32 and 64 bit conversion of that same raw file.
    Enhanced/blurred differences betwen the 32 and 64 bit conversions.
    Artificial intelligence trying to express itself?  Cosmic rays?  Kirlean messages from Beyond? 
    I happened to be using the 32 bit Photoshop today to access some plug-ins I only can get in 32 bits, converted the same image in both, and just wondered whether there might be differences.  You never know what you'll find until you look!
    Oh, and sorry Mac folks - I know you only have a 64 bit converter to play with.
    I'm reminded of the old adage:  A man with one watch knows what time it is.  A man with two watches is never sure.
    -Noel

    Thanks for your response, Eric.
    I understand what you're saying, but a several bit difference in a 15 bit result is actually quite a lot to be attributed to math inaccuracy due to floating point operations.  Even single precision 32 bit floating point operations should give you 24 bits of precision.  A few bits at the end shouldn't add up to a visible difference, unless decisions are being made in the code based on results (e.g., if noise > threshold, do something).
    Perhaps you don't use the Strict Floating Point Model, because if you did that should give you consistent results.
    I've been through the decision of which floating point model to use in my own software, initially thinking that the Fast model would be better for speed (obviously), but as it turns out the repeatability of results with the Strict model is well worth the tiny bit of extra time it takes for the results to be predictable.  You might want to reconsider using Strict, as I have, especially if these are not just round-off errors but decisions being made in the code based on floating point results.  Looking around on the web, I see more folks than just I have made that specific choice.
    Food for thought.
    -Noel

  • Beginner question regarding 32-bit mixing and mixdown workflow

    Hello
    I have a beginner question regarding 32-bit mixing and mixdown.
    If I edit some 16Bit, 44.1kHz Stereo WAV Files and put them into multi-track view to do crossfades, how should I do the mixdown?
    Audition shows me in multi-track view, that it is doing 32-Bit mixing.
    Can I just mixdown to 16Bit, 44.1kHz Stereo without any dithering (as the files are 16Bit, 44.1kHz Stereo to begin with), or will I lose quality that way?
    I will be performing a normalization to 96% to the mixdown and then split to tracks in Audition, as in the end I want to to have an audio CD.
    I guess I could mixdown to 32Bit, then normalize and in the end save back to 16Bit, 44.1kHz Stereo WAV (with dithering, I suppose?), but I want to avoid any unnecessary converting steps.
    Greetings

    Any time you do any processing on a 16bit file in 16 bit only it will degrade the audio slightly due to rounding of the calculations. Working in 32 bit floating point (Audition's default) takes account of all bits generated due to processing.
    So it is always best to work in 32 bit, even if your originals were 16, all the way through until the last stage of saving the files for CD burning. Any losses due to conversion will be insignificant against those due to working 16 bit.

  • Datatype conversion and Range

    Ok here i am back again..
    I am creating a database upgrade tool,
    the column types are also subject to change.
    I use the CAST(col_name AS newtype) function to cast types,
    this often works. But not for all cases.
    @see http://download-west.oracle.com/docs/cd/A91202_01/901_doc/server.901/a90125/functions15.htm
    For example a change from VARCHAR(255) to CHAR(3) does not work if the row currently
    contains a row with more than 3 character.
    A simple conversion that solves this problem is:
    CAST(CAST(col_name AS VARCHAR(3)) AS CHAR(3))
    I tested it using the following statement:
    select CAST(CAST('wtfomgbbq' AS VARCHAR(3)) AS CHAR(3)) from dual;
    Does this always work?
    Some type changes can be done directly on a table like this:
    ALTER TABLE table_name MODIFY ( col_name <NEWTYPE>)
    But this only works if the range is either the same or increased,
    or the table does not contain any rows, or the columns has only null values.
    (i checked the reference)
    But is there a way to always use this MODIFY statement and force the data to be transformed to the new type?
    My current approach is to create a temporary table, drop the current table, and recreate the current (with correct schema) and put the old data in the new table using the CAST function as described above.
    Maybe you experts now some way to do this faster?
    And how can i handle range decreases without getting oracle errors?
    (the update process may take several hours, so the DBA does not want an error message when updating the database)

    It would be easier as you still have to convert the output of SUBSTR to CHAR(3), else you are doing an implicit type conversion... Which is not bad, but i really want to be explicit:
    CAST(SUBSTR(col1, 1, 3) AS CHAR(3))
    Note that the sql code that does the type conversions is automatically generated, so it doesnt matter if it looks more complex.
    Anyway the main problem question is:
    Can i always use ALTER TABLE MODIFY to modify the data types of columns or do i have to use temporary cols, or temporary tables?
    Isnt there an option to force data type conversions and let oracle handle the casting (ans loss of data if the data-range is decreased) ?
    Thanks in advance

  • When will Firefox offer a 64-bit version ? I use my 32-bit Firefox,but keep my 64-bit Waterfox and Pale Moon ready, when Firefox crashes on Windows 8.

    I am a Firefox Veteran. Been around since the NCSA web browser days and used the first Firefox web browsers. I have never liked or trusted Microsoft Windows, so I've never used Internet Explorer. I had tweaked Windoze Blue Screen Of Death software from the Windows 3.0 days and did minor maintenance on the "Pizza Boxes" to keep them alive until I or my duty station could afford a newer one. Firefox has always performed for me working for "Uncle Sam" or at home. I keep Firefox and the versions: Sea Monkey, Aurora, Nightly on my laptop because I like Firefox and I like to switch from one browser to the other sometimes -- plus, in a Windows crash, I have a backup browser. Windows always "Crashes"; somethings never change. My 32-bit Firefox doesn't seem as reliable on my 64-bit 'Windoze' 8 as it was on Windows 7. My hope is that some of the Firefox Gurus have a 64-bit Firefox up on blocks in the shed out back ready to rock and roll or at least release as experimental to be played with and tested. Thanks guys -- Keep up the good work. Sam

    Someday. This is a question asked multiple times but the answer is always the same, there is no real benefit to moving to 64 bit Firefox, and the amount of work required to do something with no benefit makes this a low priority. Eventually it will happen, but just because it uses 64bit doesn't magically make things better.

  • Really bad banding and artifacts in 16-bit layered greyscale file. Bad banding is retained when converted to 8-bit with No flattening. Flatten 16-bit image and banding and artifacts disappear even with no dither or noise layer. Is this a known bug?

    Has anyone else experienced this?
    I thought it was a monitor problem at first, but I'm using a 10-bit per channel Eizo. It seems to be a Photoshop bug based on many layers interacting with each other. When I flatten everything is fine. But I need to work on this image with layers and decent fidelity. Interestingly when I convert to 8-bit without flattening (and utilising the dither function to potentially reduce banding even further), it uses the terrible artifact laden/banding to do the conversion even though when I zoom into 1:1 in my 16-bit document it looks fine. But 50% or 25% zoom I suddenly get these awful artifacts.
    Here's some screenshots to clarify. Please note I've used Photoshop for 24 years so I'm no slouch but this is the first time I've seen this. The problem is I need to do some subtle airbrush and texture work on this and it's almost unusable unless I flatten (please note, it does the same in the original 8-bit file and just to say I Gaussian-Blurred every layer with a 30px radius after converting to 16-bit so the there's no longer any 8-bit information in there or reasons for banding/artifacts). I can only think it is some of bug in Photoshop's layering engine.
    Has anyone seen this before - dealt with this before?
    Thanks in advance.
    Not sure these embedded images will work.
    8% zoomed - see all the strange banding and triangular artifacts
    <a href="http://imgur.com/izrGuia"><img src="http://i.imgur.com/izrGuia.png" title="source: imgur.com" /></a>
    Flattened view - all smooth:
    <a href="http://imgur.com/Pn35IAK"><img src="http://i.imgur.com/Pn35IAK.png" title="source: imgur.com" /></a>
    50% zoom, still there:
    <a href="http://imgur.com/Z207hFd"><img src="http://i.imgur.com/Z207hFd.png" title="source: imgur.com" /></a>
    100% artifacts disappear:
    <a href="http://imgur.com/6aGOz0V"><img src="http://i.imgur.com/6aGOz0V.png" title="source: imgur.com" /></a>
    100% 16-bit layered
    <a href="http://imgur.com/0XJfe5e"><img src="http://i.imgur.com/0XJfe5e.png" title="source: imgur.com" /></a>
    and finally 8-bit layered converted from 16-bit with dither.
    <a href="http://imgur.com/PSxiu43"><img src="http://i.imgur.com/PSxiu43.png" title="source: imgur.com" /></a>
    help!

    I can't speak to why, perhaps someone more knowledgeable than I can speak to that.   But if it only happens at certain views then it's purely a display issue; it won't happen in print or when you downsample to display size.  Such banding issues have always disappeared for me when I output to 8 bit.
    I'd assume that it's because of your monitor; it can't display all the colors and when zoomed out there's too wide of a range in a small area so banding occurs.  But that's just my guess.

  • 64 bit mode and some questions

    Happy New Year all,
    Just once I'd like to start up in 64 bit mode. I've tried to do it several times without success and I don't know what the problem is. Hardware, software?
    I'm running two 10.6.2 systems, one on 1 SSD 3 drive Raid 0 array, one on another. Both internal and I used SoftRaid to set both up.
    Each time I try, I get the gray screen with Apple logo and the spinning wheel. After a time I get the circle with a bar through it and have to use the power button to shut down. When I tried it last time on one array, the above happened and both arrays unmounted. I could only get my disks mounted by booting from a clone and both systems, the 32 and 64 bit, did not show in the Startup Disk Pref Pane. Both systems showed up when I pressed the Option key at start up but I couldn't start up from either.
    I should have remembered to press the 3 and 2 keys to get access to those drives again but a PRAM reset got my 32 bit system back again. From there with a little research I saw mention of the 3 and 2 keys again, tried it on the 64 bit system and got it to boot in 32 bit.
    Long story short though I don't know why I can't at least boot into 64 bit mode. Could it have something to do with the SSDs? Could it have something to do with SoftRaid? Why would both arrays dismount when only one should be affected?
    Is it a common issue for many 64 bit compatible Macs to not be able to start up in 64 bit mode for any one of a variety of reasons? I should say that neither of my systems can start up that way.
    Thanks, any insight is appreciated.

    Talk to Mark and look for any notes on SoftRAID and 64-bit mode;
    Try installing Mac OS only to one of your SSDs (break the array).
    Just a nice small clean Apple ONLY OS.
    "6" + "4" ought to get you into 64-bit kernal mode.
    Any PCIe card/driver you have to be concerned with?
    ==================
    SoftRAID 3.6.8 is compatible with Snow Leopard in 32 bit mode. You will be asked to replace the newer version of the SoftRAID driver that is bundled with Snow Leopard, with the 3.6.8 driver.
    +A newer, *64 bit version of the SoftRAID driver* is included with Snow Leopard for users in 64 bit mode,+ which will allow you to keep existing volumes and access data from the 64 bit version of Snow Leopard. Currently, only the X-Serve boots into 64 bit mode by default. *SoftRAID 3.6.8 will not work in 64 bit mode.*
    SoftRAID 4.0 is coming soon!
    SoftRAID version 4 will be a full 64 bit Snow Leopard compatible version. We don't have a firm shipping date, but will try to have a "customer beta" in a few weeks for those who want to beta test SoftRAID 4.0.
    The SoftRAID 4.0 official release will probably be in October. Upgrades will cost $69, except for 2009 purchasers, who will get it free.
    http://www.softraid.com/

  • How to get 64-bit install and 32-bit client to work on 1 pc

    I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support requires 32-bit client (for drivers) so I installed the 11g client also.
    My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
    Sqlplus in 64-bit works fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
    ORA-12560: TNS:protocol adapter error
    If I open cmd prompt and navigate to 32-bit sqlplus under client this WILL work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
    ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
    PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
    Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
    Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?
    Thanks in advance for any help!

    lo**** wrote:
    My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
    >
    ... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
    ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
    In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
    To pick up proper settings, PATH need to be set or used.
    >
    Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
    Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
    If "Cognos" relies on system PATH, then one way to go might be:
    - put path to 32-bit Client bin folder first in PATH
    - set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

  • ITunes 64 bit installer rolls back action on win 8 64 bit system

    I do not know what i am doing wrong, I just bought a new win 8 64 bit system and iTunes keeps rolling back before the install completes. I have tried running it as administrator and turning off firewall but it did not work. Please Help.

    Apple iPad appears to be under "Portable Devices" section and driver is from Microsoft. There is no driver under USB-section and instructions that provided in first reply I have gone thru and they are no go with this problem - they are more likely for older iPod etc devices and dot with issue to deal with 64bit/32bit things. The picture (image.jpg) gives me unfortunately just general error...
    --IKemario

  • Why can I no longer click on a conversation and st...

    Not so "instant" messaging....
    I used to be able to click on a conversation from my taskbar and immediately start typing an IM.  Since updating, I cannot tell you how many times i have clicked on a conversation and started typing only to realize i have to reach for my mouse and click on the conversation (that is popped up right in front of me) AGAIN before I can start typing a message.  This is extrememly frustrating and is slowing me down at work. 
    Please tell me if there is a setting I can modify this with or if there is a way to revert back to the old version of skype.

    Is the Zotero extension still enabled?
    *Firefox/Tools > Add-ons > Extensions
    Ar other installed extensions still working properly?
    You can try to uninstall and reinstall the Zotero extension.
    See also "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.

Maybe you are looking for

  • Using a Collection of beans to store a result set help.

    Does anyone have any sample code on the subject? This is something I wrote up, but I wanted feedback, and also an example of how to retreive data out of the array of beans in jsp package beanpersonal; import beandatabase.DBConnection; import java.sql

  • Documentation on ECM

    I need documentation on ECM..Can any one provide me the same. ??

  • Acquire data from a tab delimited file using a popup dialog object on a stamp

    I am trying to import data from a tab delimited file using a popup dialog object on a stamp.  I have purchased the book by Thom Parker--All About PDF Stamps in Acrobat and Paperless Workflows and have been working through the examples in the appendix

  • Conversion Routines and Function Modules

    Hi All, I have to write the Conversion Routines and Transformation Process for below Fields, I have a situation, where am having text files with the data having below fields, and before uploading the data to Database i have to do conversion. So anybo

  • Compare different versions of a workflow template

    Hi, How can we compare workflow templates? We need to compare the different versions available in our Quality and development systems for any kind of changes - 1. new steps added 2. steps deleted 3. other changes related to binding, events etc.. What