Hex value to Hex display

I read in a text document from a server different HEX values depending on the equipment i used. The Hex value is sent to a VI for TMT commands.
And the entrance which must be presented as HEX display.
I want to "convert" an appended path string with HEX value for example (0000 3D11 03) to HEX display (0000 3D11 03)

Duplicate Post
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved.

Similar Messages

How to sum space delimited hex values in a string, and do other stuff?

Hello
I am trying to write a Bourne shell script that takes a non-constant-length character string as input, converts each character to hexidecimal value, sums each value, takes the two's complement of the sum, logically ANDS it with FF, and if any of the resultant "nibbles" are a-f, print/save that nibble as A-F, for later display as a two-character-long character string
For example, assume a variable (as in non-constant) length variable $A
A="w04:0;2"
the road that I started down was to define
B=$( echo $A | od -An -t x1 -N"${#A}" )
# for this example, $B=77 30 34 3a 30 3b 32
It's the middle part where I need some magic. What I want to do is add the whitespace-delimited hex values of this string, for this example
C=77+30+34+3a+30+3b+32
so for this example, $C=1b2
then take two's complement of $C; for this example, $TWOS_COMP=ffff ffff ffff ffe4e
and logically AND it with FF; for this example, almost-final answer is 4e
then save final result as uppercase character string variable (for this example, variable's contents would be 4E)
Is what I'm trying to do intuitively obvious to any of you gurus out there, that could rattle off an answer? I'm okay with trashing my approach thus far and trying something totally different, within the constraint that it run inside a Bourne shell script.
Thanx in advance, if anybody can help!

I've made progress. I've converted each character of a non-constant-length string $A into a space-delimited string of hex values, added them up, and retained the least significant byte (i.e., the 8 least significant bits). Here's how:
B=$( echo $A | od -An -t x1 -N"${#A}" )
D=0
for C in $B; do
C=0x$C
D=$(($D + $C))
done
D=$(($D & 16#FF))
D=`echo "ibase=10;obase=16;$D" | bc`
The missing piece now is how to take the two's complement of $D. Anybody out there with any ideas on how to handle the two's complement piece inside a Bourne shell?
Thanx

How do I read a hex value and then convert to the binary equivalent?

I am reading hex values from a register on my unit under test. I only want to monitor certain bits in the hex value to check a status. I have everything down to run the program except how to read my hex values in binary form. Any suggestions out there?

If this is just a matter of display, then right click and choose "Format & Precision...". Beware, this works only with integer indicators (I8/16/32 and U8/16/32).
If the problem is to extract a bit value in a specific position, then go to the "Advanced >> Data manipulation" sub-palette where are all bit manipulation functions (rotate, shift, split...).
Don't forget either the logical functions (And, Or...) in the boolean sub-palette, where is also the "number to boolean array" function (to be used in conjunction with an index array node).
Another option is to use string conversion functions, in the "String >> String/Number conversion" sub palette.
Have a look to the attached image.
Enough ?
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Hex_&Bin.tif ‏20 KB

Formula nodes and hex values: strange behavior?

Hi all,
I am having problems using hex values in a formula node. It appears that the hex values are converted to decimal and then assigned to the variable. For example, if I initialize an int8 in a formula node to 0xFE (should be -2), I get 127 (the highest positive value an int8 can have). In order to get -2, I must initialize the variable to -0x02. However, if I initialize the variable to -2 decimal and view it in a indicator in hex, it displays the correct 0xFE. Is this typical behaviour? I didn't think negative hex values were used and I can't find it documented anywhere. Here is a VI that shows the "problem".
Thanks!
Attachments:
Formula Node Example.vi ‏7 KB
Formula Node Example.png ‏31 KB

Hi brett,
int8 test = 0xFE
You defined a variable to be of type I8, but then you want to assign a value out of range of that datatype. LabVIEW will coerce the value to fit the datatype resulting in 0x7F stored in test.
int16 test2 = test
Now you copy the value stored in test over to test2. Why do you even expect a value of 0xFE here? In the line before you stored 0x7F in test, so test2 will also have the value 0x7F!
int8 test3 = -0x02
This was explained before…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Trying to establish Colour Hex Value for edge of image

Using style no.11 and tinkering with the colour I've created
a couple of tiles that I can use to display as a background in my
header and left hand column.
I need to specify a backgound colour in my Style sheet to
match the edge of the graphics, but I'm having a bit of trouble
determining the Hex value of the pixels.
I've tried looking at the file as a bitmap, but it doesn't
seem to show hex values in this format.
I'd be grateful If anyone can suggest the technique required
for this process.
Thanks,
Myles

Opened the Lemon image file.
Copied the background layer by dragging it to the little folder icon at the bottom of the layers palette. (I then double-clicked on the name and called it "Image layer" you don't have to, but I like to name layers as a matter of course.)
Selected the Background layer and filled it with white*.
Selected the Image layer and added a layer mask by clicking on the little mask icon at the bottom of the layers palette (3rd from left).
Took the gradient tool and chose black to white (should be the default). Drew the tool across the image to fill the mask (making sure the mask is selected in the layers palette.)
Voilá!
You can keep the layered image by doing a "Save for Web" which will prepare the file for the web page.
*If your web page had a different colour you could use that here.

Paint Bucket not previewing accurate colors/Hex values

Hello,
I recently installed CS5.5 on my son's macbook pro with retina (10.9.5) and he is trying to use Flash. However, when he selects the rectangle next to the paint bucket and then moves the cursor down to the palette that popped up, neither the hex value nor the color in the rectangle change to reflect the color under the eye dropper. I also have CS5.5 installed on my macbook pro (10.8.5) and it works perfectly and displays colors perfectly. Any idea what's going on? Is there a setting that I am missing to turn this on/off?
Thanks for any help!!!
JG

Here is a photo to better show the issue:

Assigning a hex value to a variable and getting binary value of a variable.

I try to develop java programs and I need to do a conversion unicode to EBCDIC and vice versa.
How can I assign hex values to variables to build UTF-EBCDIC and EBCDIC-UTF table and get hex or binary value of data to compare it to value of in the table?
I did a conversion like this with PL/1 before. I do not know how can I do it with Java. Because I am new to Java.
Thank you in advance.

I will run java code in mainframe and java uses
unicode for data in default and mainframe environment
is EBCDIC. So I have to translate the data from
unicode to ebcdic.I said I think String supports EBCDIC encoding...
String ebcdic = new String(ebcdicBytes, "Cp500");
http://java.sun.com/j2se/1.4.2/docs/guide/intl/encoding.doc.html

How to print the HEX values of non-displayable characters!

I am trying to tokenize a string that contains non-displayable characters i.e. EBCDIC or ASCII. How can I print the HEX values of the non-displayable characters. e.g.
"StartTEST1TEST2TEST3TEST4TEST5TEST6TEST7TEST812END"
How can print the HEX values of in the above string. Any help is appreciated.
Thanks

    char ch = 28; // or whatever character you want to look at.
    String hexString = Integer.toHexString(ch);
    System.out.println(hexString);

Possible to supply a hex value to solid's color property?

I know the AE Scripting Guide specifies that we have to supply an array of RGB values if we wish to change a solid's color property. I'm just curious if it is possible to supply a hex value in lieu of an RGB array. Does anybody have any experience with a work around?
Thanks!

Dan,
Just wanted to add that I didn't realize your function assumed the hex color value would be passed in as `0xFFFFFF`. My data was passed in as a string such as `FFFFFF`. To fix, I just added one line:
function hexToColor(theHex){
theHex = parseInt(theHex,16);
var r = theHex >> 16;
var g = (theHex & 0x00ff00) >> 8;
var b = theHex & 0xff;
return [r/255,g/255,b/255];
Thought this might help somebody who had the same data coming in question. Thanks, again for the help.

How to Pass a HEX-Value to AdobeLifeCycle (TA:SFP) .

Hello all,
how to pass a HEX-Value to print a BLACK RIGHT-POINTING TRIANGLE?
I want to pass a HEX value to AdobeLifeCycle (TA:SFP).
This is done as follwoing:
*-- Variablen
DATA hex(2) TYPE x.
SET BIT: 01 OF hex TO 0,
         02 OF hex TO 0,
         03 OF hex TO 1,
         04 OF hex TO 0,
         05 OF hex TO 0,
         06 OF hex TO 1,
         07 OF hex TO 0,
         08 OF hex TO 1,
         09 OF hex TO 1,
         10 OF hex TO 0,
         11 OF hex TO 1,
         12 OF hex TO 1,
         13 OF hex TO 1,
         14 OF hex TO 0,
         15 OF hex TO 1,
         16 OF hex TO 0.
The HEX-VALUE ist u201E25BAu201C from the codepage 4110 = BLACK RIGHT-POINTING TRIANGLE, (use TA:SPC to see it).
I set the HEX-VALUE before i call the PDF-OUTPUT:
move hex to ls_frmglobal-hex. u201E(the field ist defined as u201ERAWSTRINGu201C)
Then i call the Output;
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
    /1bcdwb/docparams = fp_docparams
    frmglobal         = ls_frmglobal
    frmisu            = ls_frmisu
    frminf            = ls_frminf
    connections       = connections
    t_sums            = t_sums
EXCEPTIONS
    usage_error       = 1
    system_error      = 2
    internal_error    = 3
    OTHERS            = 4.
The result is u201E25BAu2018 instead of the BLACK RIGHT-POINTING TRIANGLE.
Can any one have a idea what is goning wrong?
I know how to print a Triangle on the Designer the quetion is how to pass the Hex-Value from a different codepage than the Stanndard codepage which we use.
Thanks and regards
Ibrahim

I am trying to match \xfa which means that match faas
a hex value.
All I want to know is how to use the RE class tocheck
for a cetain hex value.
Correction:
If the data is numeric, it can be matched using a hex,
or octal representation for the regular
expression. for instance, the numeric value 6 will be
matched with either of the following regexes (hex,
and octal, respectively). Read the API for
the Pattern class if this doesn't make sense.
"\06"
"\006"(Should have checked first...)

How to Convert a HEX value to CHAR value...Unicode Issue...

Hi,
How can I convert HEX value to CHAR value.
The Code in non Unicode system is:
DATA: t_text LIKE tline OCCURS 0 WITH HEADER LINE.
constants: c_hex_20a5(2) TYPE x VALUE '20A5'.
t_text-tdline = 'seller of the item so listed. A legend of the Seller Code(s) is as'.
 TRANSLATE t_text-tdline USING c_hex_20a5.
The same code give error in Uni-Code system:
error is "c_hex_20a5 must be an character type object (C, N, D, T or String type)."
If anyone know, what is the solution, please let me know.
Thanks!
Puneet.

Hi,
Try declaring the Hex chars using the ABAP char utilities. This is just a sample piece of code on how to declare and use:
CLASS cl_abap_char_utilities DEFINITION LOAD.
DATA: ws_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf.
data: c_newline TYPE x VALUE '0D'. [ it is zero D, for carriage return ]
ws_lf = c_newline.
 CONCATENATE it_tab-maktx
 ws_lf
 ws_template
 INTO it_notificatn-template.
Hope this helps...
Regards
Subramanian

SDIXML_DOM_TO_XML is giving hexa values not xml

Hi all,
As per the suggestion from Satish, I am using these FM to convert data> dom> xml.
but the function SDIXML_DOM_TO_XML is giving hexa values
Please advise.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
EXPORTING
NAME = 'ACCESOS'
DATAOBJECT = ACCESOS[]
IMPORTING
DATA_AS_DOM = L_DOM
CHANGING
DOCUMENT = M_DOCUMENT
EXCEPTIONS
ILLEGAL_NAME = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
CHECK NOT L_DOM IS INITIAL.
W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
IF W_RC IS INITIAL.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
W_RC.
ENDIF.
--CALL FUNCTION FOR: put the XML data ino ITAB--
CALL FUNCTION 'SDIXML_DOM_TO_XML'
EXPORTING
DOCUMENT = M_DOCUMENT
IMPORTING
XML_AS_STRING = W_STRING
SIZE = W_SIZE
TABLES
XML_AS_TABLE = IT_XML
EXCEPTIONS
NO_DOCUMENT = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE 'Ok'.
ELSE.
WRITE: 'Err =',
SY-SUBRC.
ENDIF.
LOOP AT IT_XML INTO XML_TAB-D.
APPEND XML_TAB.
ENDLOOP.

also,
I am trying to write the XML file to file in app.server.

Converting a hex String to its corresponding hex value...?

Yeah, I'm having quite a bit of fun guessing this one... :p
I have a string of n characters and have used Integer.toHexString( ( int )str.charAt( i ) ) to convert each character to a string representing its hex value. Now I need to USE that value for bit-wise operations, like, say, applying the AND, OR, etc. operators...
Example:
hexvalue &= 0xC000FFFF; //the second value is the one extracted from the string;
How can achieve this...? Any help is greatly appreciated... :}

Since a Java char is numerically a Java short, you can apply bitwise operators to chars directly - the conversion to hex simply changes the way that the char is viewed; the result can also be viewed as a number in other bases.
For instance, the char 'A' can be also be represented as any of the following values:
binary - 1000001
octal - 101
decimal - 65
hex - 41
Likewise, 'Z' can also be viewed as
binary - 1011010
octal - 132
decimal - 90
hex - 5A
"Anding" the letter 'A' with 'Z' ('A' & 'Z') or doing the same using any of the other representations will result in (binary 1000000, octal 100, decimal 64, or hex 40) - the bit pattern is the same, only the representation of the result varies.

Adobe Illustrator CC 2014 not allowing me to change colors by typing in a precise hex value.

Over the last two days, I have lost the ability to type in a hex value to the color picker to change an object's color. Anyone else experience this and know of fixes? I can select from the pre-made swatches or gradient-color picker field, but I need to be able to enter precise hex values per my style guide.

JWoo,
What happens if you use the Web Safe RGB from the Color palette flyout and insert the values there?
For failures in general, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Numeric or value error: hex to raw conversion error , pls help

I am having problem with a sproc which accepts a Raw parameter.
I have a table called Profile:
CREATE TABLE PROFILES
PROFILEID INTEGER NOT NULL,
USERID INTEGER NOT NULL,
PROFILE RAW(255)
and a sproc named addprofile
CREATE OR REPLACE PROCEDURE addprofile
profile IN RAW,
userName IN VARCHAR2
AS
userId INT;
BEGIN
GetUserIdByName( userName, userId);
INSERT INTO Profiles
( ProfileID,userId , profile )
VALUES ( Profiles_ProfileID_SEQ.NEXTVAL,AddProfile.userId ,
AddProfile.profile );
END;
I am calling the Ent Library's Insert profile method which is part of DbProfileProvider.cs (Security App block). It is trying to persist a serialized profile object into the database.
private void InsertProfile(string userName, byte[] serializedProfile,
Data.Database securityDb, IDbTransaction transaction)
DBCommandWrapper cmd = securityDb.GetStoredProcCommandWrapper
(SPAddProfile);
cmd.AddInParameter("userName", DbType.String, userName);
cmd.AddInParameter("profile", DbType.Binary, serializedProfile);
securityDb.ExecuteNonQuery(cmd, transaction);
I get the following error:
Any suggestion on what needs to be changed to get this working? thanks!
Exception Details: Oracle.DataAccess.Client.OracleException: ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error ORA-06512: at line 1
Stack trace:
[OracleException: ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
ORA-06512: at line 1]
Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
Oracle.DataAccess.Client.OracleException.HandleError(Int32 errCode, OracleConnection conn, String procedure, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src)
Oracle.DataAccess.Client.OracleCommand.ExecuteNonQuery()
Microsoft.Practices.EnterpriseLibrary.Data.Database.DoExecuteNonQuery(DBCommandWrapper command)
Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteNonQuery(DBCommandWrapper command, IDbTransaction transaction)
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.InsertProfile(String userName, Byte[] serializedProfile, Database securityDb, IDbTransaction transaction)
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.SetProfile(IIdentity identity, Object profile)
[InvalidOperationException: Error saving the profile for the following user 'test'.]
Microsoft.Practices.EnterpriseLibrary.Security.Database.DbProfileProvider.SetProfile(IIdentity identity, Object profile)
EntLibSecuritySample.DFO.Security.SecurityHelper.SetUserProfile(IIdentity identity, Object Profile) in C:\DFO\Sample\Security\EntLibSecuritySample\SecurityHelper.vb:285
[ApplicationException: An error has occurred saving profile object to Datastore. See stack trace for further information]
EntLibSecuritySample.DFO.Security.SecurityHelper.SetUserProfile(IIdentity identity, Object Profile) in C:\DFO\Sample\Security\EntLibSecuritySample\SecurityHelper.vb:287
EntLibSecuritySample.ProfilePage.cmdSaveProfile_Click(Object sender, EventArgs e) in C:\DFO\Sample\Security\EntLibSecuritySample\profile.aspx.vb:59
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain() +1292

Harsh,
I am not a user of the Enterprise Library so I can not speak to the specifics of that. However, here is a short sample that is based on the information you've provided. Perhaps it will be useful.
Database:
create table profiles
profileid integer not null,
userid integer not null,
profile raw(255)
create or replace procedure addprofile
p_profileid in integer,
p_userid in integer,
p_profile in raw
as
begin
insert into
 profiles (profileid, userid, profile)
 values (p_profileid, p_userid, p_profile);
end;
/C# code:
using System;
using System.Data;
using System.Text;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace HarshTest
/// <summary>
/// Summary description for Class1.
/// </summary>
class Class1
 /// <summary>
 /// The main entry point for the application.
 /// </summary>
 [STAThread]
 static void Main(string[] args)
 // connect to local db using o/s authentication
 OracleConnection con = new OracleConnection("User ID=/; Pooling=False");
 con.Open();
 // create command object and set properties
 OracleCommand cmd = new OracleCommand();
 cmd.Connection = con;
 cmd.CommandText = "ADDPROFILE";
 cmd.CommandType = CommandType.StoredProcedure;
 // parameter object for profileid
 OracleParameter p_profileid = new OracleParameter();
 p_profileid.OracleDbType = OracleDbType.Int32;
 p_profileid.Value = 1;
 p_profileid.Direction = ParameterDirection.Input;
 // parameter object for userid
 OracleParameter p_userid = new OracleParameter();
 p_userid.OracleDbType = OracleDbType.Int32;
 p_userid.Value = 1;
 p_userid.Direction = ParameterDirection.Input;
 // create a byte array for the raw value
 ASCIIEncoding encoder = new ASCIIEncoding();
 byte[] byteArray = encoder.GetBytes("TestProfile");
 // parameter object for profile
 OracleParameter p_profile = new OracleParameter();
 p_profile.OracleDbType = OracleDbType.Raw;
 p_profile.Value = byteArray;
 p_profile.Direction = ParameterDirection.Input;
 // add parameters to collection
 cmd.Parameters.Add(p_profileid);
 cmd.Parameters.Add(p_userid);
 cmd.Parameters.Add(p_profile);
 // execute the stored procedure
 try
 cmd.ExecuteNonQuery();
 catch (OracleException ex)
 Console.WriteLine(ex.Message);
 // clean up objects
 p_profile.Dispose();
 p_userid.Dispose();
 p_profileid.Dispose();
 cmd.Dispose();
 con.Dispose();
}Maybe the part about creating the byte array is what you are missing...
- Mark

Hex value to Hex display

Similar Messages

Maybe you are looking for