Hi all How take care of errors in LSMW..

HI all,
Can you people help where we are correcting errors in LSMW . How we have handle errors in LSMw.
regards,
anilreddy.

Hi Anil,
Please chk this thread. You will get the answer.
ERROR HANDLING IN LSMW
Reward Points if Useful
Regards
Gokul

Similar Messages

How To Track the Errors In LSMW

Hi Experts,
When I Execute LSMW, If I Get Some Errors Over There.
How to Track And Clear Those Errors.
Is there Any Methods For this Or Is there Any Way to Do this .?????
Please Let me Know the Solution.
Regards
Khanna

hi,
In the field mappings and conversion rules,
in the global section,define an internal table.
data : begin of it_errors occurs 0,
desc type string,
end of it_errors.
and where ever you have wrong or empty values for the fields,populate error there to the internal table.
for example, if Material no is blank,i have to give err msg
IF NOT MATMAS_MRPVIEW-MATNR IS INITIAL.
BMM00-MATNR = MATMAS_MRPVIEW-MATNR.
else.
IT_ERROR-DESC = 'Material no is empty'.
append it_error.
SKIP_RECORD. "to skip further processing of this error record.
ENDIF.
like this you populate all the error records to that IT_ERRORS internal table.
and finally download it using GUI_DOWNLOAD in the event
'__END_OF_PROCESSING__'
there is another way also, you can create a Session in the LSMW, and record the error records in the session then process the error records in the session
~~Guduri

How To Track the Errors For LSMW Idoc

Hello Expert
While working on Material Master Idoc getting an error message
Error 51 Application not posted
Details: IDoc included in IDoc packet containing an error: transfer it separately
How do i tackle this
Thanks

Hi,
I hope idoc is failing because of problem with the application data. Its not because of RFC. You told that you were getting 51, it means inbound idoc...if its problem with RFC, before creation of idoc itself it should be there...but now idoc created successfully and tried to post / create application document. there it was failing.
Can you give details some thing like, which inbound FM you are using to post the idoc & idoc type.
Regards,
DJ
reward, if its useful

Trap errors in lsmw tool

hi all
how can we trap errors in lsmw tool?

hi,
u can get the log after u process the session
when u go to sm35 u will find the log there u will get the summery of the process in that if u choose only errors to display to then u will get only errors occured in it.
u can refer this thread also, it will give an idea also.
Re: errors record handling in LSMW
Rgds
Anver
if hlped pls mark points

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

How to check particular error in alert log file

Hi all,
How to check particular error in alert log file,for supose if i get error in batabase yesterday 4 pm & today i want to check alert log file to get basic idea..it might be a big file so how to check that particular error..
Thanks & regards,
Eswar..

What's your oracle version?
If you are in 11g you can use adrci tool
1- set homes diag/rdbms/orawiss/ORAWISS/ : the rdbms home
2- show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term : to find all the ORA-% errors in the alert file
3- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term : to find all the ORA-% errors in the alert file during the last 51 days,
4- show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-1/24 " -term : to find all the ORA-% errors in the alert file during the last hour,
5- show alert -P "MESSAGE_TEXT LIKE '%ORA-12012%' and originating_timestamp > systimestamp-1/24 " -term : to find the particular ORA-12012 error in the alert file during the last hour,
Example:
[oracle@wissem wissem]$ adrci
ADRCI: Release 11.2.0.1.0 - Production on Wed May 4 10:24:54 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
ADR base = "/home/oracle/app/oracle"
adrci> set homes diag/rdbms/orawiss/ORAWISS/
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%'" -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2010-12-11 19:45:41.289000 +01:00
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/home/oracle/app/oracle/oradata/ORAWISS/system01.dbf'
ORA-1547 signalled during: ALTER DATABASE RECOVER database until time '2011-01-21:10:48:00' ...
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>
adrci> show alert -P "MESSAGE_TEXT LIKE '%ORA-%' and originating_timestamp > systimestamp-51 " -term
ADR Home = /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS:
2011-03-15 10:19:45.316000 +01:00
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j006_5536.trc:
ORA-12012: error on auto execute of job 26
ORA-01435: user does not exist
Errors in file /home/oracle/app/oracle/diag/rdbms/orawiss/ORAWISS/trace/ORAWISS_j000_5692.trc:
ORA-12012: error on auto execute of job 29
ORA-01435: user does not exist
2011-03-15 11:39:37.571000 +01:00
opiodr aborting process unknown ospid (31042) as a result of ORA-609
2011-03-15 12:04:15.111000 +01:00
opiodr aborting process unknown ospid (3509) as a result of ORA-609
adrci>

How create the SMQ2 error through program ?

Hi all,
How create the SMQ2 error through program ?
Any idea ... plsease share.
Regards,
Srikanth

Hi juturusrikanth ,
which one is the SMQ2 error?
[FAQ's, intros and memorable discussions in the ABAP General Forum|FAQ's, intros and memorable discussions in the ABAP General Forum;
[How to post code in SCN, and some things NOT to do...|How to post code in SCN, and some things NOT to do...;
Regards
Clemens

How to write the errors into a specific file

Hi all,
How to handled the errors in the scenarios,By using fault messages we can informed about errors to sender.But in my case i have to gather all errors & write into a specific file.For this can i create another Communication Channel for File reciever.How can i gather error messages in the scenario.
Early response is appreciate

Hi,
Bhavesh had already answered how to handle it. For saving it in a file yes you can use File Receiver adapter.
Regards,
Prakash

Errors in LSMW

Hi Experts,
How can we handle errors in LSMW..(Using Batch input recording method in LSMW)..If any error comes will it allow to craete session?..
Regards

hi
good
LSMW creates a file of all the input records that failed. Look at the error log and see why it failed. Fix the problem (config/data/etc.) then reprocess the records that failed.
thanks
mrutyun^

Error in LSMW getting return code 6

Hi all,
i Am getting a Error in LSMW getting return code 6 , after asign a file , in the read data step i am getting the error , please help me it is very urgent,
sridhar

Hi,
If the Sy-Subrc is 0 then Success, if the Sy-SUBRC is 4 then failure, if the Sy-SUBRC = 6 then the user might be not access to read the file
AUTHORITY-CHECK sets SY-SUBRC to 0 if the user has the necessary authorization, otherwise 4, 8, 12, 16, 24, 28, 32, or 36 depending on the cause
Regards
Sudheer

[MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

Hi...
I'm a ABAPer.
I got to create outbound abap proxy for synchronous server proxy and described below.
My problem is program can not catch the actual error message when occurred error during send data to XI.
The return message is just 'MESSAGE.GENERAL'.
But according to the XI part, 'Key error' is actual reason.
So... how can i take the actual error text like 'Key error'?
* Only MESSAGE.GENERAL is return message for all kind of errors.
Thanks.
Below----
TRY.
 CREATE OBJECT abap_proxy.
 CALL METHOD abap_proxy->execute_synchronous
 EXPORTING
 output = gs_out
 IMPORTING
 input = gs_in.
Exception Handling
 CATCH cx_ai_system_fault INTO go_sys_exception.
 g_sys_result = go_sys_exception->get_text( ).
 CATCH cx_ai_application_fault INTO go_app_exception.
 g_app_result = go_app_exception->get_text( ).
ENDTRY.
COMMIT WORK.
Return status 'D' is succeeded.
if gs_in-sales_group_rer_sap-xstat <> 'D'.
 WRITE:/ 'System Error Message :', g_sys_result.
 WRITE:/ 'Application Error Message :', g_app_result.
endif.
*--Result--
System Error Message : MESSAGE.GENERAL
Application Error Message :
Message was edited by: Miju cho
Message was edited by: Miju cho

Thanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin

HT3702 I would like to remove the credit card info from my account and only use iTunes prepaid cards. How do I take care of this and make sure that payment will be taken from iTunes cards? Thanks

I would like to remove credit card info from account and only use iTunes prepaid cards. How do I take care of this and make sure payments are takin from the iTunes cards? Also, I need to change my last name and address on account.

Hi Alexis ...
I need to change my last name and address on account.
Help here > How to change the name you use for your Apple ID
I would like to remove credit card info from account and only use iTunes prepaid cards.
Help here > Create an iTunes App Store account without a credit card

How to take care of case statements while migration

Hello Sir,
using migration workbench tool for converting SQL server database to Oracle Databse.Getting error message in converting below SP with Case Statement.
Please help me in solving this problem
****** Object: Stored Procedure dbo.SP_Sec_GetScreenFieldAccessLevel
Procedure Name : SP_Sec_GetScrnFldAccessLevel
Notes :
This procedure selects data from E_E_C_field_Access_level table
CREATE PROCEDURE SP_Sec_GetScrnFldAccessLevel
AS
Select Screen_ID + '-' + FieldDescription as ScreenFieldName
,Level=
CASE
WHEN Len(IsNull(E_E_C_field_Access_level.ein_code,''))= 1 THEN campus_name
WHEN Len(E_E_C_field_Access_level.ein_code)> 1 THEN ein_name
END,
ein_name,campus_name,Urole,
IsLocked=case IsLocked
when 1 then 'Yes'
when 0 then 'No'
End
from E_E_C_field_Access_level,Field_Name_Field_Description,User_Roles_Master,EIN,Campus
where
E_E_C_field_Access_level.Screen_Field_ID*=Field_Name_Field_Description.ID
and E_E_C_field_Access_level.User_role_Id *=User_Roles_Master.Role_Id
and E_E_C_field_Access_level.ein_code *= EIN.ein_code
and E_E_C_field_Access_level.campus_code *= Campus.campus_code
and E_E_C_field_Access_level.del_flag=0
order by E_E_C_field_Access_level.date_created desc
IF @@ERROR <> 0
RETURN @@ERROR
ELSE
RETURN 0

If not using the new SQL DEveloper Migration Workbench, then u should be. I think this new version takes care of case statements.

I cannot use Quicken on my new MacBook Air (Mac OS X Lion 10.7.2) Any suggestions? I love Quicken and it takes care of all my financial needs.

I cannot use Quicken on my new MacBook Air (Mac OS X Lion 10.7.2) Any suggestions? I love Quicken and it takes care of all my financial needs.

You can wait for Quicken to update (supposedly in the works) or you can switch to another application such as Quicken Essentials or another application of which there are several you will find at MacUpdate or CNET Downloads.
Otherwise you'll need to return your MBA and buy a slightly older model Mac that still runs Snow Leopard. Lion will not run any PPC-only applications such as Qucken or MS Office 2004.

How do I Uninstall Adobe PSE9? All I get is an error message, "Error 1316. The specified account already exists". Then the Unistaller rolls back and the program just sits there, partially uninstalled and unusable.

I have upgraded to PSE13 and want to unistall PSE9. When I try to do this all I get is an error message, "Error 1316. The specified account already exists". Then the uninstaller rolls back and I am left with a partially uninstalled version that is unusable. I tried to reinstall the software from the original PSE9 disk but all it tries to do is uninstall the version already on my computer, and this then does the same thing as noted above. How do I completely uninstall PSE9?

See here:
How do I remove older versions of Photoshop?

Hi all How take care of errors in LSMW..

Similar Messages

Maybe you are looking for