Hi All,How to set printer configuration for sap4.7 IDES version for home pr

Hi All,
Pls provide the information How to set the configuration for our home printer from the sap 4.7 IDES version .If possible pls provide with screen shots
thanks & regards.
bharat

check SPAD (tcode) to installl Printer and all formats.
Regards
Prabhu

Similar Messages

How to Sent Printer Configurations while Printing in SMARTFORMS for PO?

Hi,
I took PO Print Out on LIPI Dot Matrix Printer before 10 days. At that time our Basis Consultant kept Some Configurations for that Printer. After some one changed the Configuration Settings of that Printer. Now we took a print but it is printing differently.
Is it possible to send printer Configurations while calling PO smartforms in my driver Program so that while taking PO Print Out my Print Out Specific Configurations will set automatically if antbody can change the printer Configurations.
can anyone suggest how to pass printer configuration through smartform or driver program .

Thank u

How can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
Hope this helps

How to set up a basic file sharing server for my small architectural business?

I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!

Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business?

How to set up Airport Express in Bridge mode for hotel use

Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n.

+"Please provide step by step instructions on how to set up Airport Express in Bridge mode for hotel use. I do not have a computer with me, only an iPhone and AEX 802.11n."+
AirPort Utility is the application that must be used to setup and make any configuration changes to the AirPort Express. I'm not aware of an "App" for this.
If you could borrow a computer from someone there for 30 minutes or maybe use the computer in the lobby, you could download AirPort Utility and reconfigure your Express. To help with setup, use an ethernet cable from the computer to the Express to help AirPort Utility "see" the Express.
http://support.apple.com/downloads/#airport

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to set the 'Configuration Bits' in the PIC16F84

I am using the PIC16F84 in a circuit and I'm programming the assembly for the PIC. However I can't figure out how to set the configuration bits. For example I want to select the LP Oscillator, turn the WDT off, turn the PUT on, and turn the CP off. Normally if I was using the IDE from Microchip I would add the line:
_CONFIG H'3FF0'
However Multsim does not recognize this as a valid code. In addition the P16F84.inc file contains the following definitions:
_CP_ON                       EQU     H'000F'
_CP_OFF                      EQU     H'3FFF'
_PWRTE_ON                 EQU     H'3FF7'
_PWRTE_OFF                   EQU     H'3FFF'
_WDT_ON                      EQU     H'3FFF'
_WDT_OFF                     EQU     H'3FFB'
_LP_OSC                      EQU     H'3FFC'
_XT_OSC                      EQU     H'3FFD'
_HS_OSC                      EQU     H'3FFE'
_RC_OSC                      EQU     H'3FFF'
What is the code though to select which options you want to use?

Try this code:
_CONFIG _CP_OFF & _PWRITE_ON & _WDT_OFF & _LP_OSC
I tried this in the assembler and it didn't return any error messages when compiling. I found this in a PIC Book that I downloaded off the internet.
I hope it works for you. I am new to the MCU Module and learning about it so don't consider me an expert on it by a long shot.
Have A Nice Day
Kittmaster's Component Database
http://ni.kittmaster.com
Have a Nice Day

How do I print a list of sent files for the year?

How do I print a list of sent files for this year?

Hi lasersrq,
What a great question! There is no functionality that allows you to print a list the files you've sent via Adobe Send (or SendNow).
Please feel free to submit a feature request--it's a good idea! https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Best,
Sara

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

How do I print a CD cover in version 11 of iTunes?

How do I print a CD cover in version 11 of iTunes? - Thanks in advance.

Hi kdcee,
In iTunes 11, there is no longer a Print function from any menu; you have to use a hotkey print command. Select your playlist and then hit 'Ctrl+p" (or on a Mac 'Cmd+p'.). You should then see print options for CD inserts similar to iTunes 10. See https://support.apple.com/kb/PH12348 for more info.

BW 3.5 IDES version for x64 Urgent

Dear support,
We need to install BW 3.5 IDES version for X64 windows-MSSQL
platform , but we are unable to find CD/DVD sets available on
Service.sap.com. Please let us know how to download the same and exact
path for downloading at earliest.
Thanks and Regards,
AjitR

Thanks Markus but i have already raised message to SAP week back , but since it is IDES issue SAP will hardly come back on this .
I have my fingers crossed meanwhile i just need a note saying this is not possible for X64 platform for keeping my customer on hold.
If you could find some.

Once and for all: How to set up and use SSH

Yes, I know ssh has been discussed on and off, but never in its entirety; and yes, there are step by step instructions on the www, but at one point or another they skip a crucial instruction that would be necessary for unix-dummies (e.g. how to save and close the nano-editor in Terminal). So, please pardon my question:
There are several points I'd like to ask for ssh-connecting two macs on a local network:
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first? If so, how? Please point me to a reliable and step-by-step instruction site.
There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
Thanks for your consideration.

First I'm not sure what your goals are.
1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first?
If you have ssh keys, you can do this without passwords. If you have not exchanged keys with the remote system, you will be asked for the password of the user you are attempting to login as.
If so, how? Please point me to a reliable and step-by-step instruction site. There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
Log into the remote system. This could be via ssh.
On the remote system, run the following command to generate an ssh key for that remote system:
ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/Users/username/.ssh/id_rsa): <<take default>>
Created directory '/Users/username/.ssh'.
Enter passphrase (empty for no passphrase): <<enter nothing>>
Enter same passphrase again: <<enter nothing again>>
Your identification has been saved in /Users/username/.ssh/id_rsa.
Your public key has been saved in /Users/username/.ssh/id_rsa.pub.
The key fingerprint is:
aa:bb:cc:dd:ee:ff:gg:hh:ii:jj:kk:ll:mm:nn:oo:pp [email protected]
This will generate an ssh key for the remote system. This could be any system that support ssh, such as a Unix system, or another Mac.
Copy the id_rsa.pub file from the remote system to your Mac. When I say "your Mac" I mean the one that you want to make the ssh connection from. The id_rsa.pub is found in the remote system's ~username/.ssh/ directory.
Append the copied id_rsa.pub to your Mac's ~himbear/.ssh/authorized_keys2 file
cat id_rsa.pub >>~himbear/.ssh/authorized_keys2
Now when you ssh to that specific remote system, it will NOT ask for a password. The first time you ssh to any system, ssh will ask if the system is really the system you thing it is. But once you say "yes", it will not ask that question again.
Repeat for every remote system you wish to log into using an ssh key.
2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
MacUser. A flash from the past, as in the MacUser magazine.
ssh is not used by default when you make connections. If you want an ssh connection, you have to establish it intentionally.
ssh can be used to pre-establish a tunnel (or tunnels) that other services can use. Once an ssh tunnel is establish, connections to local host's tunnel port will be connected to the specified remote port. For example:
ssh -L 5901:localhost:5900 [email protected]
will establish a tunnel that VNC can use. The VNC client would connect to localhost display 1 or port 5901.
ssh allows multiple -L tunnels to be specified on the ssh command line.
3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
Inside you home. Not much. Unless of course you do not trust the other members of your family. That is to say, others having your WPA2 password, and are thus on the inside, and can sniff you packets.
4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
If you are using the Mac OS X Leopard built-in *Screen Sharing* and you are connecting to another Mac's built-in Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop), then in the *Screen Sharing* preferences, is an "Encrypt all network data" option.
If you wish to set this option in advance, you can launch *Screen Sharing* by double clicking on System -> Library -> CoreServices -> Screen Sharing.app
You can *Screen Sharing* connections over the net using iChat. This is one of the easiest ways to take control of their system. Of course they need to cooperate. I use a Free AOL Instant Messager (AIM) account for my iChat connections. And as a side benefit you can text, audio chat and/or video chat with the person at the other end.
If you are NOT using the build-in Mac OS X *Screen Sharing* and/or you are NOT using the build-in remote Mac OS X remote management server, then this is a situation where an ssh tunnel would be a very good idea.
However, setting up an ssh tunnel between 2 systems across the internet gets complex.
In this case you might want to consider using something like LogMeIn.com which will deal with all those nasty home routers without needing to to do nasty router configurations, and it will be a secure connection. LogMeIn.com will not be as fast as a *Screen Sharing* connection or a VNC connection, but it will be secure and easy to establish. Again, this is only if you can not to Mac to Mac *Screen Sharing* using built-in Mac OS X remote desktop.
Now if you want to roll your own ssh tunnels for VNC, then I'm just going to outline the things you need to do.
If the remote system is behind a home router, you need to configure that remote home router to "Port Forward" port 22 on the Internet side to port 22 on the target Mac. Bonus points if the internet side using a high number port to discourge net bots from knocking on your door. Use the ssh -p 12345 option to connect to the high numbered port that is forwarded to port 22 of the destination Mac.
On the remote Mac you need to run a VNC server. If this is a Mac, then Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop). If it is not a Mac, then for Windows, TightVNC, UltraVNC, RealVNC are possible options. Linux has a built-in vncserver, or you can install x11vnc which has the advantage of displaying the desktop screen.
Once you can access the remote system, you use an ssh command like the following:
ssh -p 12345 -L 5901:localhost:5900 remote.system.address
You can get the remote system's address by having the remote system surf over to http://whatismyip.com. Then they can tell you the IP address.
If you are going to be doing this a lot, you can get a free no-ip.com or dyndns.org dynamic DNS name for the remote system, and the remote system can run a dynamic DNS client (available from no-ip.com or dyndns.org) which will keep the dynamic DNS name updated as the remote person's ISP change's their IP address.
Finally, now that you have an ssh tunnel for VNC traffic, you have your VNC client connect to
Address: localhost
Port: 5901
Depending on your VNC client you may need to specify Display 1 instead of Port 5901. Or if you do not get a Display or Port option you specify localhost:5901

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

How to set up same timezone in BI Publisher for all the USERS?

Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
Ashish

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How to set up Windows with Reader and certificate for all users

Good afternoon (GMT),
we're dealing with a Win XP (SP3) system that is set up by an Administrator. One task is to set up the system in a way that all users (w/o admin rights) become able to read a certified-protected PDF. Currently we know a way to install the "public key" for this certificate only for one known user. But how to proceed when not all users are known? The users shall later on never be asked to confirm the certification installation/registration.
If it helps, here is the software version:
Acrobat 8.12 to encrypt the PDF via certification. In near future I will switch to Acrobat 9.x
Reader 7.x and/or 8.x on customer PCs.
Thank you for ideas and hints.
BTW: Next time we want to provide a solution for Win7 systems, too.
Carsten

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

Hi All,How to set printer configuration for sap4.7 IDES version for home pr

Similar Messages

Maybe you are looking for