Hi folks, I have my new mac mini connected to my telly (HDMI) and want to set it up. It didn't start the set up assistant

Hi folks, I've got a new mac mini and want to start using it. I put it on my HDMI telly and connected it to magic trackpad and wireless keybord, both are working fine. I can see the mac dashboard but I cannot click anything! The pointer moves where I want it to but nothing reacts and the setup assistant didn't start either.
Any idea what I can do?

The following article may be of help.
http://support.apple.com/kb/ht3924
Oops, I see this article has been referred to already.
Message was edited by: John Lockwood

Similar Messages

  • I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

    I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does  not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

    I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

  • I have a new Mac Mini, and I want to send raw video...

    I have a new Mac Mini (Lion), and I want to send raw video to the Internet, using Ustream, Skype or other services. I don't need cameras, microphones, or other periphrals. My video consists of 1 volt composite (from a video switcher), and the audio is full stereo at 600 ohm line level on each channel. What do I need?
    I have a video capture card on my Windows machine; but the results have been crappy at best. And the so-called "Geek Squad" at Best Buy (where I bought the Mac Mini) have been less than helpfull. Further, the on-line Apple Store shows nothing. Maybe someone here has an idea.

    You are going to need a video capture device of some sort and I believe the following will be suitable.
    http://www.elgato.com/elgato/int/mainmenu/products/Video-Capture/product1.en.htm l
    It is available in the US as well http://www.elgato.com/elgato/na/mainmenu/products/Video-Capture/product1.en.html

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

    I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

    I suspect the monitor has an ADC connector
    http://en.wikipedia.org/wiki/Apple_Display_Connector
    If so you need one of these:
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
    Otherwise what connector is on the monitor?

  • I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    http://www.apple.com/osx/uptodate/

  • I have been sync'ing my iPad  2 with Windows XP. Now I have a new mac mini and want to switch to this new computer.  How do I save the info on my pad?

    I have been syncing my I Pad 2 with a pc running windows xp.  Now I have a new mac mini and want to switch the syncing to the mac.  What do I do to protect the information and purchased apps on my I pad? 

    Backup and Restore
    http://support.apple.com/kb/ht1766

  • HT4410 I have a new mac mini, do I have enough space to download Windows 7, and can I just download the software or purchase a disc?

    I have a new mac mini, do I have enough space to download Windows 7, and can I do it through online purchase or disc?  My bootcamp assistant mentions using a USB flash drive??? 

    Yes you do have enough storage, you only need let's say 10GB to properly install Windows with a few (very small) programs. You'd be best of just going to a store and buying a Windows 7 install DVD (not an upgrade one!), or using one that you might have laying around at home. You can also purchase Windows 7 via the Microsoft online store and than burn it to a DVD. It is possible that installing from a USB-drive works, but I have not tried this yet.

  • I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine

    I have a new mac mini I5 - I cannot find and copy Maverick onto a flash so that I can install on the other 7 iMacs - don't want to download from App store to each machine - files too big
    Please assist

    You need to download it on one of the iMacs via App store but not install since after it installs the installation download gets deleted.
    After it is downloaded you can copy to a USB device. You can also make a bootable USB install device by:
    downloading and using DiskMaker X

  • I have a new mac mini with mt lion where is the os on this computer

    I have a new mac mini with mt lion where is the os on this computer. It came with Mt Lion on it

    You have a couple of options for booting OS X.
    One is to use the OS X Recovery Disk Assistant to copy the Mountain Lion Recovery HD to a USB thumb drive. A 4GB thumb drive is sufficient as the Disk Assistant only needs 1GB.
    A second option would be to use a cloning software like SuperDuper or Carbon Copy Cloner to clone your existing Macintosh HD to an external USB drive. This would give you an external bootable copy of what you have now.

  • Should I buy airport express, extreme or time capsule?  I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices.  I live in a two-level house.

    Should I buy airport express, extreme or time capsule?  I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices.  I live in a two-level house.

    A Time Capsule is an AirPort Extreme with a built in hard drive to allow your Mac(s) to back up automatically, so it's a logical choice if you need a wireless router and back up capabilities for your Macs
    The AIrPort Extreme has a bit better antenna arrangement than an AirPort Express, so it would be a good choice for a two level house.
    Depending on the location of the "main" wireless router, you may find that you still need to add an extender or two in other parts of the house for full, fast wireless coverage. The AirPort Express is a good choice for this duty.
    To compare the 3 Apple devices, see this Apple support document:
           Compare Apple Wi-Fi base stations          AirPort Express    AirPort Extreme    Time Capsule    

  • HT4527 My old mac book was backed up to a Time Machine drive.  That Macbook is dead.  I have a new Mac Mini.  How do I get the iTunes library (not just the music files but all other data...playlists, ratings, etc) on the new Mac from my Time Machine?

    My old Mac died. I had it backed up to a Time Machine external drive (fortunately).  I have a new Mac. I want to get my entire iTunes library from the Time Machine drive to the new Mac. I want not only the music files but all the "library" metadata, playlists, song rankings, unique genre designations. How do I do this?

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • New Mac Mini today, no picture with HDMI

    Good evening,
    I just picked up a brand new Mac Mini late 2012 model to use as a HTPC through my AV system in the livingroom.
    I connected a HDMI lead to my Mac, changed to the correct source & switched it on. I can hear the start up chime through my speakers but my TV remains blank, just black. I tired in another HDMI port but the result was the same.
    I don't have a PC, so have no monitor & I was going to get a loan of a mouse & keyboard to set up before I get an app so I can use my iPhone as a mouse/keyboard.
    Does the very first set up have to be done through a monitor? How can I get the picture on my TV? (Pioneer PDP 5080 LXD)
    Currently sitting with a £500 brick :(

    The following may be painfully redundant to you, yet I hope it helps you solve this HDMI issue.
    WIth the Mac mini and TV powered off, disconnect the Mac mini HDMI cable.
    Power on the TV and do the following settings:
    Select the desired HDMI port.
    Home menu > Option > HDMI Input > Video > Auto.
                                    > HDMI Input > Audio > Auto.
    Power off the TV. Reconnect the Mac Mini HDMI cable and ensure a good connection. Power on the Mac mini and let it boot up, before turning on the TV. Now, switch the TV to the appropriate HDMI port. You may have to twiddle with your mini display settings in system preferences, and possibly cycle power to the TV.
    I believe HDMI ports input4 and input5 accept HDMI video and audio in from a computer, while ports input6 and input7 are strictly HDMI video in. This Pioneer model supports HDMI v1.3. You might reconfirm that your HDMI cable supports this version of HDMI or higher.

  • Have a new mac with OS X 10.9.5 and my CS4 is Not Working anymore. It says to Contact Adobe Support regarding the licence- but that Seems impossible. Any idea how to solve this?

    I Have a new mac book pro with OS X 10.9.5 and now my CS4 is Not Working anymore. It tells me to Contact Adobe Support regarding the licence - but that Seems impossible. Any idea how to solve this?

    Use the web chat and just be patient.
    Mylenium

Maybe you are looking for

  • Tab delimited file on app server. How to do that?

    Hello, When i transfer a tab delimited file from pre. server(windows) to app. server(windows) using CG3Z , the tab delimitation  is not working. for eg : the file with below layout 01.04.2007     31.03.2008     1     120      01.05.2007     31.07.200

  • Sql loader in procedue

    hi, i have a a data file and a control file as follows data file(data.txt) 7782, "Clark", "Manager", 7839, 09-June-1981 7839, "King", "President", , 17-November-1981 7934, "Miller", "Clerk", 7782, 23-January-1982 7566, "Jones", "Manager", 7839, 02-Ap

  • Swf file inclusion

    Hi, How can i embedd a  swf(flash file) in the login of the enterprise portal .i changed the images and text using the logon par file downloaded to nwds . i want to embed a swf file in place of the images in portal login Thanks&Regards Prasad

  • Log of Blocked Calls?

    Do blocked calls show up on the Comcast call logs? I have blocked a local number because whoever owns it keeps calling me multiple times during the night and early morning. Never during the day. They don't say anything and I don't think it's a telema

  • Need HELP ASAP! printing help

    I have a wireless network. I'm trying to get my pc to connect to my airport base station so that I can print. Is it possable? Apple is telling me they don't know how. can anyone help me with this?