Hi hello...I have a problem deleting unwanted albums in my phone/photos, any one who can help me do it step by step please.Have patience with me I am not so good with this.
Hi Hello,
Before I start my question, hope nobody laugh at me, I am not a computer geek, I just a user of a phone.
I have read so many how to do and how to delete albums in the web/google but not anyone of them make sense to me,I hope someone can help me do this step by step.
I am using an iphone 4/operating system 7.0.4
I would like to delete the unwanted albums in my phone under the photo icon, where do i start?
like... 1/ connect the phone to the computer
2/ click the itune icon
3/ then whats next?
Please help I could not download anyother app, the system( phone ) always tells me that memory is almost full, I am already frustrated, please help.
If I reset the phone will it erase all the phone numbers and remove all my notes?
Thank you.
<Email Edited by Host>
Hi mylenebar!
Here is an article that will help you remove the desired photos from your phone:
iTunes: Syncing photos
http://support.apple.com/kb/ht4236
To delete synced photos and videos from your device
In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
Click the Photos tab in the resulting window.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
Click Apply.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
my new 3 month old imac 27 with 10.6.8 snow is giving a **** of noise from the fan. suddently starting after today starting up. and the volume buttoms and screen lights up and down not working any more.. any one who can help here???
Try an SMC Reset. (System Management Controller)
Shutdown>unplug from power for ten minutes>press and hold in the power button for ten seconds>startup again.
Also try a PRAM Reset. (Parameter RAM)
Shutdown. At the bootup chime, hold down CMD-Option-P-R together, wait for two more chimes, total three, then let go of all keys to finish booting,
If this doesn't do it, run the Hardware Test in Extended
http://support.apple.com/kb/ht1509 -
I have a CS3 Creativ Suite. - I have uninstalled it fram XP the corret way. Now i have installed Windows 7 and try to reinstall the creative suite. It accept the first CD an the serial number, but when i get to the second CD it stop. Any one who can help?
If you have Windows 7 Pro you can try to install CS3 in XP mode.
-
Is there any one who can help me solve this?
Hi.
I'm taking AP Computer Scinece AB in high school now.
I've been assigned many programs so far. But.. I can't figure them out.
There are two programs I need your help. So..Please!!!!!! Help Me!!!!
Please!! Enjoy helping me!
<Program #1>
It's divided into three small programs and I've figured out one of them, which was the easiest one..You will be able to see the programs if you click on the link below.
(page1)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=2&page=1
(page2)
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=3&page=1
<Program #2>
http://iboard3.superboard.dreamwiz.com/board.cgi?db=90_darkoo&idx=4&page=1
The way I figured out first part of program #1 was like this :
public class ThreeX1
public static void main ( string[] org )
system.out.println ();
int startValue = 21;
int count = 0;
while (startValue >1)
count ++;
if (startValue % 2 == 0)
startValue = startValue/2;
else
startValue = 3*startValue +1;
system.out.println ( count );
===================================================
From there, for the second and third programs of program #1, I tried to figure it out by using 'for' statement instead of 'while', but I couldn't.
So..Please help me out.. Thank you
or you can e-mail me too. It would be great too.
add. : [email protected]I probably shouldn't be doing your homework but here it is:
public class ThreeX2{
public static void main ( String[] org ){
int startValue = 2;
while(startValue<100){
System.out.print(startValue);
System.out.print("\t");
System.out.println(timesToGetToOne(startValue));
startValue++;
private static int timesToGetToOne(int intForValue){
int count = 0;
while (intForValue!=1){
count ++;
if (intForValue % 2 == 0)
intForValue = intForValue/2;
else
intForValue = 3*intForValue +1;
return count;
public class ThreeX3{
public static void main ( String[] input ){
int maximumTries = 1000000;
int numberOfitterations = 10;
try{
numberOfitterations = new Integer(input[0]).intValue();
}catch(Exception e){
try{
maximumTries = new Integer(input[1]).intValue();
}catch(Exception e){
int startValue = 2;
while(startValue<maximumTries){
if(timesToGetToOne(startValue)==numberOfitterations){
System.out.print("When startvalue is: ");
System.out.print(startValue);
System.out.print(" it will take exatly ");
System.out.print(timesToGetToOne(startValue));
System.out.println(" iterations to get to 1.");
// remove the next line and it will show all values that
// takes numberOfitterations amount of times to get to 1
break;
startValue++;
private static int timesToGetToOne(int intForValue){
int count = 0;
while (intForValue!=1){
count ++;
if (intForValue % 2 == 0)
intForValue = intForValue/2;
else
intForValue = 3*intForValue +1;
return count;
}Problem 3 is diffucult, since the input is one date I assume that the current reading is for this date. I don't
know the date of the previous reading so I cannot calculate if the consumption is between June through
Ocober.
your Main method shoud have 4 inputs date accountNumber currentReading previousReading
Your main function would look like this:
public static void main ( String[] input ){
Calendar date=null;
int accountNumber = 0;
int currentReading = 0;
try{
String[] s = input[0].split("/");
date = Calendar.getInstance();
date.set(Calendar.YEAR,new Integer(s[2]).intValue());
date.set(Calendar.MONTH,new Integer(s[0]).intValue()-1);
date.set(Calendar.DAY_OF_MONTH,new Integer(s[1]).intValue());
}catch(Exception e){
System.out.println("cannot get date, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
accountNumber = new Integer(input[1]).intValue();
}catch(Exception e){
System.out.println("cannot get account number, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
currentReading = new Integer(input[2]).intValue();
}catch(Exception e){
System.out.println("cannot get current reading, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
try{
previousReading = new Integer(input[3]).intValue();
}catch(Exception e){
System.out.println("cannot get previous reading, please start this program the following way: ");
System.out.println("programName date(format mm/dd/yyyy) accountNumber currentReading previousReading");
// check the date between june and oct:
// (5>date.get(Calendar.MONTH))&&(9<date.get(Calendar.MONTH)) -
HI THERE IS THERE ANYONE WHO CAN HELP ME?I UPGRADE MY IPHONE 3GS TO IOS5 AND NOW IT WONT ACTIVATE AND SAYS THE SIM CARD IS NOT SUPPORTED I CHANGE FOR ANEW SIM ALREADY BUT STILL WONT ACTIVATE.PLEASE HELP
you're responding to a post that's almost 2 months old. Time to post your own thread.
-
Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?
Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
Russ -
Hi all,
I updated my iPhone 5 recently to IOS 7 - Since then I do not get any access to my home WLAN / WIFI with the iphone 5.
At same time the iphone 3S and IPAD 1 of my wife (both IOS 5.x) still work fine in our homes WLAN / WIFI.
Who can help to get my Iphone 5 with IOS 7 back to work in the home WIFI ?
Thanks in advance for any possible solution.
Best regards
Dirk from Hamburg GermanyTry this first.
On the iPhone go to Settings > General > Reset and select Reset Network Settings.
This will erase all saved wi-fi networks and settings.
If no change after this, try resetting your modem and wireless router. Disconnect the router from the power source followed by disconnecting the modem from the power source. Wait a few minutes followed by powering your modem back on allowing it to completely reset before powering your wireless router back on allowing it to completely reset with the modem. -
The photos must be viewed in sequence as prepared with the filenames I have chosen to describe them.
How can I just simply transfer this over to a dvd ? Any help is appreciated !
Thank YouThere are two ways to export photos so they remain in the same order as you put them in the iPhoto album:
A:
1 - select the photos in the album and use the Photos ➙ Batch Rename ➙ Title to Text menu with the option to add a sequential number to the file name.
2 - Export out of iPhoto via File ➙ Export ➙ File Export with the option File Name = Title.
B:
1 - select all of the photos in the album and export via File ➙ Export ➙ File Export with the option File Name = Album name with number.
Both method will produce file with the following file name format: xxxx-01.jpg, xxxx-02.jpg, etc., which will be in the order you had in iPhoto when view alphanumerically in the Finder.
OT -
Is there really no one who can help me with my question postet 3 days ago!?
I have a problem with blurry images after publishing -Am I really the only one who thinks this is a big problem -I tried to get some help 3 days ago? Is there other forums that can help me on this topic?
It looks fine in iweb, but not in the browser after publishing... I'ts only with small logo images with hard graphichs in jpeg, its not my compression, it looks fine before publishing...dear wyodor, I thought that I explained my problem all right in my post? well,
when I put a logo in the corner of my site -in my case a jpg file with some text, it looks good in iweb, but after publishing its not possible to read the small text because of the way iweb compress photos - my question is -can I do anything to keep the jpeg-compression i made i photoshop? Is there no way in iweb to control the compression? Its really frustrating -and the only really problem I have with iweb
se how my logo looks im my site:
http://web.mac.com/pierrienevoldsen/24x36.dk/om_24x36.dk.html
I have the same logo twice now just to check different advises, but still its impossible to read the small lettes -but not in iweb -
I can't download the apps with big size like need for spees
Have a little patience. 4 minutes is only a short time for someone to find your post and reply to it. Also clicking on "This Solved My Problem" marks your problem as solved so many folks that may otherwise help will pass the question by since it is "solved."
I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. -
im trying to upgrade my iphone4 but it keeps coming up timed out anyone got any ideas what i can do
im trying to upgrade my iphone4 but it keeps coming up timed out anyone got any ideas what i can do
-
I am having a weird problem while attempting to re-install iTunes, is there anyone who can help?
Its kind of an odd problem, never happened to me before, but my old iTunes was very outdated because my updater was not working, and today having to actually use iTunes but it was very outdated, I read on the apple support site that the only way to update my version was to delete and re install.
Upon completely deleting iTunes and all other related software (following the steps given here:http://support.apple.com/kb/HT1923), and then installing the latest version of iTunes from the apple site, I still receive the very same error message about a quarter way through the installation saying 'Error, object already exists', and when I click ok it pops up a few more times until the iTunes install wizard says there was an installation error and to either finish or try again.
I really need to use iTunes asap for some important business so any help would be much appreciated.
Additional info:
Operating system is Windows 7
Computer is a Dell
Downloaded using Google ChromeFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if iTunes won't install normally.
tt2 -
Who can help me :)--a problem with java program(reset problem in java )
I do not know how to make the button reset,my program only could reset diagram but button.If any one who could help me to solve this problem.The problem is When the reset button is pressed, the image should immediately revert to the black square, and the 4 widgets listed above should show values that
correspond to the black square.The code like this,first one is shapes:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class shapes extends JFrame {
private JPanel buttonPanel; // panel for buttons
private DrawPanel myPanel; // panel for shapes
private JButton resetButton;
private JComboBox colorComboBox;
private JRadioButton circleButton, squareButton;
private ButtonGroup radioGroup;
private JCheckBox filledButton;
private JSlider sizeSlider;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public shapes() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up resetButton
// register an event handler for resetButton's ActionEvent
resetButton = new JButton ("reset");
resetButton.addActionListener(
// anonymous inner class to handle resetButton events
new ActionListener() {
// draw a black filled square shape after clicking resetButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up a pair of RadioButtons
// register an event handler for RadioButtons' ItemEvent
squareButton = new JRadioButton ("Square", true);
circleButton = new JRadioButton ("Circle", false);
radioGroup = new ButtonGroup();
radioGroup.add(squareButton);
radioGroup.add(circleButton);
squareButton.addItemListener(
// anonymous inner class to handle squareButton events
new ItemListener() {
public void itemStateChanged (ItemEvent event) {
if (isShow==true) {
shape = DrawPanel.SQUARE;
myPanel.setShape(shape);
myPanel.draw();
}// end anonymous inner class
);// end call to addItemListener
circleButton.addItemListener(
// anonymous inner class to handle circleButton events
new ItemListener() {
public void itemStateChanged (ItemEvent event) {
if (isShow==true) {
shape = DrawPanel.CIRCLE;
myPanel.setShape(shape);
myPanel.draw();
else
System.out.println("Please click Reset button first");
}// end anonymous inner class
);// end call to addItemListener
// set up filledButton
// register an event handler for filledButton's ItemEvent
filledButton = new JCheckBox("Filled", true);
filledButton.addItemListener(
// anonymous inner class to handle filledButton events
new ItemListener() {
public void itemStateChanged (ItemEvent event) {
if (isShow==true) {
if (event.getStateChange() == ItemEvent.SELECTED) {
isFill=true;
myPanel.setFill(isFill);
myPanel.draw();
else {
isFill=false;
myPanel.setFill(isFill);
myPanel.draw();
else
System.out.println("Please click Reset button first");
}// end anonymous inner class
);// end call to addItemListener
// set up sizeSlider
// register an event handler for sizeSlider's ChangeEvent
sizeSlider = new JSlider(SwingConstants.HORIZONTAL, 0, 300, 100);
sizeSlider.setMajorTickSpacing(10);
sizeSlider.setPaintTicks(true);
sizeSlider.addChangeListener(
// anonymous inner class to handle sizeSlider events
new ChangeListener() {
public void stateChanged(ChangeEvent event) {
myPanel.setShapeSize(sizeSlider.getValue());
myPanel.draw();
}// end anonymous inner class
);// end call to addChangeListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(resetButton);
buttonPanel.add(filledButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
radioButtonPanel.add(squareButton);
radioButtonPanel.add(circleButton);
buttonPanel.add(radioButtonPanel);
// attach button panel & draw panel to content panel
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
container.add(sizeSlider, BorderLayout.SOUTH);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
shapes application = new shapes();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}second one is drawpanel:
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();
}If any kind people who can help me.
many thanks to you!4 widgets???
maybe this is what you mean.
add this inside your actionPerformed method for the reset action
squareButton.setSelected(true);
colorComboBox.setSelectedIndex(0);
if not be more clear in your post. -
hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!
Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
New User created and Test User deleted... I hope this helps. -
I´ve so many privat things on I tunes like pictures, music etc.and i won´t loose them. is there anybody who can help me to save my private things and help me to solve teh problem
Thanks you for help greetings from austriaI just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!
Maybe you are looking for
-
I can't figure out how to close my apps on my 4s iPhone?I came from a 3g- and it is apprently
How do I close my apps on my 4s Iphone? I just switched from a 3g (way behind the times i know)
-
Hello Gurus!! I'm a report painter user for almost a month, i've been doing a report using multiple currencies, it has worked well, but i need it now to make it to a target currency (lets say, Japanese Yens, YEN), the money is originally in mexican p
-
In a FM 11 book, how can I display filename w/o file location?
In a FrameMaker book, how can I display filename without the file's location on the hard drive? For example, The book would list: "MyFile.fm" instead of C:\windows\documents\Framefiles\XYZ Company\widgets\draft_2013_1111\MyFile.fm If this cannot be
-
Adding leading zeros in a field mapping
Hi, I am getting account as a 5 char field in the input file. I need to map this to a 10 char field in XI and add leading zeros in case the value is all numeric. Is there any standard data type/ mapping that can achieve this or I need to write a UDF.
-
THIS IS A REALLY IMPORTANT QUESTION
Right so there's no charge if you use iPhone to iPhone / iMessage to iMessage, but I read something about it charging out of the country if you're using 4G. Does this still apply if I have 4G, but unlimited messaging? ;_; please answer. Thank you.