Hi. I am using a GPIB controlled Tektronix oscilloscope 11403. I am controlling it using Labview. I can extract the waveform trace through the program. But how can I save a hardcopy of that data in a spreadsheet?
Thank you very much.
If you want a text file in comma or tab separated data, then all you have to use is Write to Spreadsheet File.vi which will save either a 1D or 2D array array of data (i.e. 1 or 2 traces). If you want to write directly to Excel, you can modify the Write Table to Excel.vi example. There have been other Excel examples posted to the forum that you could do a search for.
Similar Messages
-
How to use Labview ""buttons"" to functioning the program?
i'm trying to use the ok button to operate the program to add the value in the cluster X Y (millemetre) [which is from the machine vision operation] with the value X Y offset [which i gonna input them myself] but .. i dont' know how to make it done , now i'm trying to use event structure but it's not working
plz give me some advice thanks ... by the way i'm got to make this thing done by 3 days due to my project schedule ... thank you
also this software is to locate the orientation for robot to grip the object by using CCD camera
Message Edited by NuMetal on 01-04-2010 10:55 AM
Message Edited by NuMetal on 01-04-2010 10:55 AM
Solved!
Go to Solution.
Attachments:
Project1.vi 97 KB
1.jpg 92 KBPlace the Event structure inside a while loop. Have a look at some of the examples that ship with LV, they for sure show this.
Then use the value change event for the ok button (place the button's terminal in that fram to have the latching behaviour set correctly).
You can pass the data of XY to the loop output in the same event frame to read it at the very moment, the ok button is pressed.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml -
What can I use font book for? I read the description but still don't get it. Does it contain fonts that are not already installed on my new Mac? Thanks.
Disabling (turning off) a font will make it unavailable for use in any font menu. You can alwasy enable the font(s) again - they're not gone permanantly. DON'T disable System fonts, though -> that's just asking for trouble.
Here's -> https://www.youtube.com/watch?v=JdR6-4lnF5A - a good video tutorial about using Font Book.
Clinton -
So basically I'm a girl who can't figure out technology. I want my music and apps to stay and I want to be able to update my phone because it still has it's original software.
Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though. -
I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?
dglenn9000 wrote:
I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards. -
I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and I was using it just fine yesterday.
2015-02-24_1129 - DavidIpromote's libraryTry resetting Photoshop Preferences. Use your Photoshop start icon to launch Photoshop and immediately press and hole Shift+Ctrl|CMD+Alt|Option keys Photoshop should Prompt you with Do you want your Preferences deleted. Reply yes. Photoshop should then delete your user ID preferences and then create a default set of preferences for your ID and start successfully.
-
I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
I need GPIB Driver for Keithley 263 Calibrator/Source Meter using Labview. Can anybody help?
Thank you in advance.Hi,
on Keithley's website is explained :
"The Model 263 offers a more economical, more precise alternative to the Model 6430 or the Model 236 when used as a low-current source. It is used almost exclusively as a current calibrator."
This leads to Model 236.... A LabVIEW-driver is available @: http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Keithley%22&qt=&layout=IDNet
Maybe you have to "reconstruct" some parts - but it will help.
regards
wha -
Error 8 when starting the extracting the program-data load error:status 51
Dear all,
<b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
<b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
IDoc sent to SAP system or external program"
r<b>/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
Error 8 when starting the extraction program</b>
Info IDoc 1 : Application document posted (green)
r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
IDoc sent to SAP system or external program"
bw side: "IDoc: 0000000000007089 Status: Application document posted,
IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
check connection is ok, tried to restore the setting for bw-r3 connection though same problem
Have checked partner profile.
<b>what's wrong with the process? </b>
Best regards,
dushyant.Hi,
Refer note 140147.
Regards,
Meiy -
I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!
It depends on how you wiped your drive. Depending on how you did it, only the directory was erased and the data can be found with drive recovery software. Some are free, although there is a small charge for most of them (~$30). You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files. Use Google to search for the software. Different programs work differently and can find different things.
Good luck.
John -
When an image is inserted here using clipboard, it appears in the editor, but it does not appear in
when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works
Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold. -
السماح بالكتابة بحسب النطق الصوتي
I want to be all the downloads through the program IDM How do I add that option to download? Has already tried to right-click of the mouse?
''duplicate - ''Make sure that you have IDM 6.07 build 15?
* go to '''about:addons''' - extension and check that IDM CC is enable or not
* if all are up to date and enable, then IDM should start download autometically -
I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks
If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id
-
There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom
Maybe you are looking for
-
11g EM for windows host credentials always fail verify
Hi, I tried to enter the OS host credential in the 11g EM database control, but it always failed to verify or show invalid username or password. Anyone know how and what user name should I enter? Thanks Vincent
-
ORA-28545 Between ORACLE 10G and SQL SERVER 2008
Hi All, i'am doing heterogeneous connectivity as oracle 10G (Unbreakable linux4) to sql server (SQL SERVER 2008) The DSN and the connections works ok (FreeTDS and UniXODBC). I create the dblink create database link inforpyme connect to "sa"
-
Cannot send mail "recipient rejected because server does not allow relaying"
Just went to Verizon store with new Iphone4. They tried, but didn't help. I can receive my email, but cannot reply or compose and send msgs. The message says, "Cannot send mail. A copy has been place in your Outbox. The recipient xxxxxx was rege
-
I posted this on the Cisco MARS User group on Google, but thought it is best to cover it here as well. I just read that this can not be done using a keyword, but am interested if there is any other way of getting the same (or equal) result. Is there
-
Saving disk space with aperture, help please?
Ok, let me start by saying I am using a Macbook Pro 17inch model, with a 120gb HD. I just recently switched this summer to Mac over from PC. Now iPhoto has not been very satisfying to me, so that prompted me to buy Aperture. When I used my PC, which