Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

Hi, i am using iphone4s.. 2 days ago i had a problem with wifi.. button greyed out, it was suggested to keep phone in freezer, worked temporarily and i updeted to ios7.1 but still facing same problem.. wht to do? cant afford to throw off :/ huhh..

well, you know how it is - glitches that usually resolve with a hard reset etc
then a restore. then a factory restore....then ..... nothing fixes so I try the next step with apple online - fill out my serial number and find it is a couple of weeks out of date - and then with the holidays who has time to get to the apple store? this is my second 4s handset as it is - first one the glass cracked from L to R without any impact/damage etc - they changed it out automatically because it's a 'known fault' apparently - so technically, this handset is only 6 months old - but warranty is from original purchase date -
never imagined it would turn out to be a warranty issue with the phone - and hey maybe when I get a chance to go to the apple store they'll be sympathetic, but I won't be able to get there till at least Jan 4th as it is. On the other hand, another iOS update might resolve the issue - but how long till that release? at the moment I'm having to use my old 3gs for wifi and 4s for phone!!!

Similar Messages

  • I upgrade my firefox to 3.6.4 but when i add some add-ons they tell me that i have 3.5.8 & i have to upgrade it ... i reinstalle 3.6.4 several time but still the same problem

    i upgraded my firefox to 3.6.4 but when i add some add-ons it tell me that i have 3.5.8 & i have to upgrade it ... i reinstall 3.6.4 several times but still the same problem ...
    == 2-3 days ago

    Look at the highlighted copy of your Help > About Mozilla Firefox image attached below this message.
    <u>'''Reset general user-agent'''</u>
    -In Firefox, type '''about:config''' in the URL bar and press the Enter key.
    -If you see the warning, accept it (promise to be careful).
    -Filter = general.useragent.extra.firefox
    -Right-click that preference and select Reset
    -Then restart Firefox (File > Restart Firefox)

  • I'm trying to upgrade to itunes 10.x on Windows 7 Pro.  The installation stuck at the stage "Registering iTunes automation server".  I removed the Antivirus software and re-install iTunes again.  But still get same problem.  Any solution?

    I was trying to upgrade to itunes 10.x on Windows 7 Pro.  The installation stuck at the stage "Registering iTunes automation server".  I removed the Antivirus software and re-install iTunes again.  But still get same problem.  Any solution?
    JA

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

  • I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    I'm having some problems wiht Firefox, for example; Youtube isn't loading right, Facebook won't let me send messages, search up people, and this website i made wont load right also. I've re-installed and updated it but still the same problems. Any help?

    Because I know enough to be dangerous...  I was trying to extend the two outside columns down....  Instead of just using faux columns which I have fixed since I posted the question.
    The other link problem is the left sidebar links.  When you go to the event photos page I have a repeat of the sidebar links that are on the newsletter page.  I used named anchors on the newsletter page to link to the particular article.  From the Event Photos page the links look like this:
    <a href="1112Visions_Iss1.html/#puzzle" target="_self">[Puzzle]</a>
    The problem I am having is that some of these go to the newsletter page and the anchor and some do not (I get an error message saying it  can't find the page).  To add to the problem is that when we choose say the President's Message, when it goes to the newsletter page and the correct anchor, the newsletter page is missing all the links to the graphics... the photos are missing the graphic for the faux columns is missing.  It makes no sense.  When I preview the newsletter page from Dreamweaver everything shows up fine.
    I do not know if all of this is being caused because I haven't posted this stuff to the site or what.  I've tried re-booting both the browser and Dreamweaver, dumping the cache and still the same nonsense.
    Got any ideas?

  • I have ipad 2 16gb wifi, recently it starts autorestart and crashs out of games and apps, more than 20 times aday- tried to restore, updated to the latest 7.0.4 but still the same problem

    i have ipad 2 16gb wifi, since 3 months it started to autorestart and crash out of games and apps, more than 20 times aday- tried to restore-install as new ipad- soft and hard reset-, updated to the latest 7.0.4 but still the same problem
    plz help....

    Vinayaka-
    After all you've tried, Dah*veed is probably right about needing warranty assistance.
    But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
    Try unplugging your WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect to your WiFi.
    Fred

  • Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

    Just added a number of photos from my phone. It worked fine and I printed other photos but shut it down and Now it wont relaunch!! help.

    I need a special tool just to access my own photos?
    I suggested "Find any File" because it is easier to use than the Finder's search - the results there will depend, on what you have included in your Spotlight index.
    To search using the Finder, open a Finder window; press the key combination ⌘F, and then set the search window to search "This Mac" and "Kind is 'Photo Library'"
    Only, if the library should have become corrupted, this may not work. And the search will not look inside the packages.
    The whole iPhoto library directory is only 556 MB so I guess the videos are lost for good.
    How is the "Importing > Copy items to the iPhoto Library" flag set? See my last post.
    If you imported with "store files" in there original location, the photos and videos will have remained on the card, until the crad has been erased.
    Is there a way to start iPhoto from scratch so at least I can start over and have it not destory all my data next time?
    You can create a new iphoto library, by using the command "File > Switch to Library > Create New".
    Is there way to import my photos and videos without using iPhoto?
    You can use the utility "Image Capture", that comes with every Mac  to import your photos to folders on your Mac.
    This program is horrendous!
    I never had problems with it and like it, but I understand  ....

  • I have Iphone4 and my Iphone wifi button greyed out mean not working, Please suggest what need to do.

    I have Iphone4 and my Iphone wifi button grayed out mean not working, Please suggest what need to do and i am using ios 6.

    Please ask your question

  • My laptop (win7 2ghz, 1gig) has 100% cpu usage with itunes installed (even when not running itunes) since the upgrade.  i had to uninstall.  tried installing but still the same problem.  my daughter wants the new ipad, but this is a serious problem.

    when itunes upgraded my laptop went to 100% cpu usage.  only solution was uninstall.  have tried itunes again as my daughter wants the new ipad.  still same problem tho so not keen to spend £400 on new pad without pc support.  anyone help?  (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • HT1365 reset my apple tv worked ok for a bit but still having same problem where it cannot connect to network

    reset my apple tv but still not responding. reset it due to network not connected to internet. works fine for a little while then fails again.

    I tried, but they want to charge me $19.99 to ask this simple question... And there doesn't seem to be any email address where I can ask by email.

  • Can anyone help me restore an ipod itouch ,tried restore on itunes but it fails everytime  the error code says it's a conection problem i have 2 computers and tried all usb ports but keephaving the same problem ,even bought a new connection cable

    Went to update the ipod touch and it wiped out everything , Itunes keeps trying to restore it but fails everytime giving me an error that it cannot see my ipod yet it sees it and tries to restore it everytime i connect the ipod to the pc , the help file suggested i reinstall the latest version of I tunes so i did i tried using different ports on 2 computers and also bought a new connection cable but still won't restore can anyone help?

    Try a manual install, as outlined in the link below.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Problem with MATNR in greying out sub-items of a BOM material in VA01

    Hi All,
    I'm trying to grey out the fields material number, quantity and UoM in VA01 for a sub-items of BOM material using the user exit USEREXIT_FIELD_MODIFICATION in the include MV45AFZZ.
    CHECK vbap-pstyv EQ 'TAE'.
    IF screen-name = 'RV45A-KWMENG' OR
    screen-name = 'VBAP-MATNR' OR
    screen-name = 'VBAP-VRKME'.
    SCREEN-INPUT = 0.
    ENDIF. " IF screen-name = 'RV45A-...
    Now, the problem is that the fields Quantity and UoM are greyed out but not the Material number field. I've also tried using the enhancement "V45A0003" the same problem still persists

    i think the field name is MABNR not MATNR for material number
    Message was edited by:
            Naresh Reddy

  • TS3798 I can't get wifi on my iphone even though my desktop computer can get the internet.  I thought it was a problem with the modem so I got a new one ...but still the same problem (my computer gets internet but my iPhone cannot get wifi from it).  PLEA

    I was always able to get WiFi on my iPhone through my home computer.  Then all of a sudden it went out (uses 3G network instead of WiFi).  Sometimes it would connect back to WiFi for a few seconds then back to 3G.  I then decided it was the modem so I got a new modem.   Well, I have no problem getting internet on my home computer but cannot still get WiFi on my iPhone from my computer.  What do I need to do - HELP!!

    Thank you again.
    Yes, it worked. First, I just replaced the all info. as before,  the router IP also (Stupid) , not success.
    So, I created the new network, then, the Router IP automatically showed up .
    I think the old setting still there under my Airport station (so, 2 setting right now)?
    Anyway, my iPad and iPod touch works well with the new wi-fi network.
    Thank you very much.
    I got this Airport Extreme from a friend who wen to Time Capsule, still have the box and serial No. but will not work for Apple Phone support.
    I appreciate for your fast help.

  • Firefox will not load up when i click the icon on my desktop, but still the same problem, i have checked and its loaded in the task manager and just wont load up, any help on this matter is strongly welcomed thank you mark

    as said nothing happens, i click the icon and nothing loads up. i have used 3 anti virus and spyware malware etc etc for 3 days i have been trying this, please note this install of windows 7 is fresh 5-6 days old. firefox was working fine then one day i tryed it and nothing.

    Hi,
    a) I don't have DMG either in applications but I have '''Document''' instead.
    So '''set "Document" to Always Ask '''going to Firefox>Preferences>Applications
    Now it will always ask if you want to Open or Save the file.
    b) If already downloaded, check what's under Get Info > Open with
    It should say Open With DiskImageMounter (see pic)
    https://support.cdn.mozilla.net/media/uploads/images/2014-07-24-03-56-33-60e1a9.png
    If not, select it. It's in Home>System>Library>CoreServices.
    See if it helps.

  • I have not been able to use itunes in over a month.  It says Itunes disabled.  I have reset password but still have same problem.  HELP!!!!

    I have not been able to use itunes in over a month.  My son uploaded gift cards and lost the $.  WE can no even update our apps.  WE have reset password multiple times.  But we continue to get the message ID Disabled.  I have updated my billing information.  WE do not want to use a credit card.  WE only want to use ITunes Cards.  HELP!!!!!

    Have you contacted itunes support?
    http://www.apple.com/support/itunes

  • TS2446 I couldn't update or download anythings it always shown apple ID disable,I had reset my password but still the same problem

    I can't down load anything or purchese any app. It's always shown "apple ID disable" even I had reset it.  It happen long time ago.  Pls help me.
    Thank you
           Ladda

    Welcome to the user to User Technical Support Forum provided by Apple.
    Please do not post personal information on a Public Forum.
    I have requested the Hosts remove it for you.
    For your issue...
    If disabled for Security Reasons... See here  http://support.apple.com/kb/TS2446
    If not for Security reasons...
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • How do I get you to stop showing me all this unwanted crap and just run the damned browser?

    I have 3.6 downloaded but it wont run because I can't get passed all the other crap customizing and just run the damned browser. That is all I am interested in, none of the other bull crap. What is so hard to understand? Keep it simple stupid. All I

  • Why does it say that the version has not been correctly localized for my language when I try to open it?

    I am trying to open my itunes on my windows computer. It won't open and a box appears that says " The version of iTunes has not been correctly localized for this language. Please run the english verson."

  • So many loops decreasing the performance

    So many loops are in loop, Is there any other statement to improve the performance LOOP AT p0000 WHERE begda LE pn-endda                 AND   endda GE pn-begda.     wa_datatab-pernr = p0000-pernr.     LOOP AT p0001 WHERE begda LE p0000-endda        

  • BI Content for REACH

    Hi Experts, Is there any BI Content for REACH Compliance. Or any other work going on in this area within BI. Regards Meiyappan

  • Abap Performance Tuning

    Dear Friends,        I'm got this error while use the Extended Program Check in particular z-programs where ever I’m using the Z-package how can I avoid this error in Extended Program Check .       Program:  ZCM_NO_SER_NITOR  Include:  CM_LES_CON_MIS