Problem with MATNR in greying out sub-items of a BOM material in VA01

Hi All,
I'm trying to grey out the fields material number, quantity and UoM in VA01 for a sub-items of BOM material using the user exit USEREXIT_FIELD_MODIFICATION in the include MV45AFZZ.
CHECK vbap-pstyv EQ 'TAE'.
IF screen-name = 'RV45A-KWMENG' OR
screen-name = 'VBAP-MATNR' OR
screen-name = 'VBAP-VRKME'.
SCREEN-INPUT = 0.
ENDIF. " IF screen-name = 'RV45A-...
Now, the problem is that the fields Quantity and UoM are greyed out but not the Material number field. I've also tried using the enhancement "V45A0003" the same problem still persists

i think the field name is MABNR not MATNR for material number
Message was edited by:
Naresh Reddy

Similar Messages

Has anyone had any problems with their charger blowing out?

Has anyone had any problems with their charger blowing out? mine blew, there's now a charred pin on the charger and in the socket of the macbook. The plastic around the charge socket is also cracked & distorted from the blow-out. It wasn't a power surge as no other electrical items were affected. It wasn't liquid or dust, as I'm the only person who uses it & I'm very careful. I'm concerned that the consequences could have been terrible. I wasn't present when it happened though, I can just see the evidence after the event.
I have a mid 2010 13" Macbook running the latest software & use the original magsafe charger that came with it.
Will I have to fork out for a costly repair or is there a safety issue that Apple will sort out for me?
Any advice would be much appreciated.

Everything in the box with iPhone is covered by the iPhone warranty ,go to Apple genius bar before warranty expires

TS1702 I am having a problem with the Simpson tapped out app it won't connect to the server it only happens on my iPad other iPads are ok

I am having a problem with the Simpson tapped out it will not connect to the server it only occurred on my iPad not any others in my home

Hey Jerryd820,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides suggestions if you are having issues with a specific application:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
6. Reinstall the affected application
Remove the application from your device and reinstall it.
1. Touch and hold any application icon on the Home Screen until the icons start to wiggle.
2. Tap the "x" in the corner of the application you want to delete.
3. Tap Delete to remove the application and all of its data from your device.
4. Press the Home button.
5. Go to the App Store.
6. Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
7. If the issue is still unresolved
If you continue to experience the issue, contact the developer of the application for further assistance.
Thanks,
Matt M.

Problem with Automatic Replies or Out of Office

Hi mates!
I´ve just finished migration Exchange 2003 to Exchange 2010.
Today I´ve removed Exchange 2003.
I have a problem with Automatic Replies or Out of Office. When the user active Automatic Replies in Outlook 2010, He has this Error:
Your Out of Office settings cannot be displayed, because the server is currently unavailable. Try again later.
If I logged into OWA, (Options > Set Automatic Replies) I could set it up and it worked fine.
I run Test E-mail AutoConfiguration command to see if AutoDiscover has been configured and the OOF URL is correct:
https://mail.domain.com/ews/exchange.asmx
I try to browse the OOF URL from IE, It works fine.
Authentication Permission for EWS Virtual Directory is:
Anonymous – Enabled (For IUSER)
Basic – Enabled
Windows – Enabled
Other authentication methods are disabled.
WebServicesVirtualDirectory configuration for URL:
InternalNLBBypassUrl :
https://Server1.domain.local/ews/exchange.asmx
InternalUrl
: https://mail.domain.local/EWS/Exchange.asmx
ExternalUrl
  : https://mail.domain.com/EWS/Exchange.asmx
InternalNLBBypassUrl : https:// Server2.domain.local /ews/exchange.asmx
InternalUrl
: https:// mail.domain.local /EWS/Exchange.asmx
ExternalUrl
: https:// mail.domain.com /EWS/Exchange.asmx
I use a certificate for Server HUB/CAS from my CA (Active Directory).
In EMC I have this error for certificate:
The certificate status could not be determinated because the revocation check failed.
But when I generated in the past, this status of this certificate was This certificate is valid for Microsoft Exchange.
I need help, because I don´t know I do…
Thanks.

Hi MAS,
As soon as possible I will install this kb in a PC with Outlook 2010.
Yes, I reset IIS, with the same result.
I check this URL, and I run this command: TestOutlookWebServices -identity user01 with this result:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1019
Type : Information
Message : A valid Autodiscover service connection point was found. The Autodiscover URL on this object is https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1006
Type : Information
Message : Contacted the Autodiscover service at https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1016
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1015
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1014
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://mail.domain.local/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1022
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1106
Type : Information
Message : Contacted the Autodiscover service at https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXCH] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXCH] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXCH] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1116
Type : Information
Message : [EXPR] The AS service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1115
Type : Information
Message : [EXPR] The OAB service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1114
Type : Information
Message : [EXPR] The UM service is configured for this user in the Autodiscover response received from https://SERVER1.domain.local:443/Autodiscover/Autodiscover.xml.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1122
Type : Success
Message : Autodiscover was tested successfully.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXCH] Successfully contacted the UM service at https://mail.domain.local/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1026
Type : Success
Message : [EXPR] Successfully contacted the UM service at https://mail.domain.com/EWS/Exchange.asmx. The elapsed time was 31 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1124
Type : Success
Message : [Server] Successfully contacted the AS service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 934 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1126
Type : Success
Message : [Server] Successfully contacted the UM service at https://SERVER1.domain.local/ews/exchange.asmx. The elapsed time was 93 milliseconds.
All ok, but with these errors:
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.local/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXCH] Error contacting the AS service at https://mail.domain.local/EWS/Exchange.asmx. Elapsed time was694 milliseconds.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1013
Type : Error
Message : When contacting https://mail.domain.com/EWS/Exchange.asmx received the error The request failed withHTTP status 401: Authorization Required.
RunspaceId : 1a13d412-b75d-48b5-8938-72ad53f11cb7
Id : 1025
Type : Error
Message : [EXPR] Error contacting the AS service at https://mail.domain.com/EWS/Exchange.asmx. Elapsed time was15 milliseconds.
In IIS for EWS has this method Authentication:
- Anonymous
- Basic
- Windows
For SSL Settings in EWS has this configuration:
- Require SSL
- Client Certificate: Ignore
For Default Website in IIS, SSL Settings:
- Require SSL
- Client Certificate: Ignore
I don´t have ISA/TMG. I use HLB KEMP for publishing OWA...

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

Sub items of bill of material is not copying in sales returns

Dear All,
Regarding sales returns with referance to invoice consist bill of material sub items are not
copying in to sales returns order because invoice is not consist sub items of bill of material those which are relevent
for delivery but relevent for billing and pricing
For this issue make subitems of bill of material to be copied in to billing without pricing to solve the issue.
If not can create the sales returns order with referance to sales order consist bill of materials to copy sub items along
with the main item.
but client wants to create the sales returns with referance to invoice irrespective of the bill of materials
we need to customize the zprogramme to get sales order No. if invoice consist bill of material to copy sub items from sales order to sales retuns order.
With out z programme can we copy the sub items of bill of materials from invoice to sales retuns order.
But invoice consist only main item of bill of bill of material relevent for pring not relevent for delivery.
sub items are relevent for delivery but no relevent for billing and pricing.
Please provide the solution.

Hi,
Main item relevant for billing not for delivery
sub items relevant for delivery not for billing
Here you can flow sub items in to invoice but do not add item value to invoice net value
You can control this through statistical indicator in item category detail VOV7
Under business data tab Statistical value maintain X or Y
Then even if sub item have price then at invoice time it will statistical (just at item level) system will not add it in net value of invoice.
Kapil

Click-To-Call AddIn with Citrix are greyed out

Hello,
we use the Cucilync 8.2 and installed the Office Addins. On a local machine installation, we have no problem with the addin. It works fine.
But in the Citrix installation, we have greyed out buttons for dialing. I have no idea where to begin with troubleshooting.
Has anyone a idea for me?
The OS is 64Bit and the Office is 2007 32 Bit. This should be supported i think so.
Thanks for your help!!!
Christian

Hello,
Please check for specific citrix supported enviroment here -
http://www.cisco.com/en/US/docs/voice_ip_comm/cupa/click_to_call/8.0/english/release/ReleaseNote_c2c.html#wp2485669
If this is within the supported environment, then this is most likely a network issue (given the same user account works on windows workstation)
For deskphone control, CUCILync directly takes to callmanager over QBE. Please check "Server Health" for Deskphone status if it states "QBE connected". If it is saying otherwise, please check CTI Manager SDL log of callManager to check for issues. Also CUCILync problem report will have "core.log" file that might give more indication what the issue is.
For softphone control (CSF device), this is a SIP protocol device and a simple wireshark capture with "sip" filter will give out more info on the local machine.
Thanks

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

IOS 6.1.3 problems, entering passwords and greyed out wifi

Since upgrading to iOS 6.1.3, I've had many issues! Firstly, I got the greyed out wifi screen... Now I've spoken to a few people before, they said that it is a hardware related issue, which I find really hard to believe unless the os messed up something on my motherboard... Wifi was working perfectly find before I updated the iOS!
Second issue I've been having is entering passwords... On a couple of websites, an apps, whilst entering passwords, safari would crash, this also happened when I was entering a password on google chrome...
Really bad update just to fix the Passcode by pass which it would take someone with a masters degree to figure out!!! Any help would be appreciated!

The update stressed the chipset past the breaking point. It was already failing before the update. Now that it's been updated, it's detected the failure.

HT6065 I installed this update. I have never had problems with "multiple prompts to unlock "Local items" keychain" until after I installed this update. Now, I can't get it to STOP prompting me.

So how do I fix this? How do I get this to go away? It's prompting me for a password that I haven't ever set up!

I have the same problem with three pop-up prompts:
(1) com.apple.iCloudHelper wants to use the "login" keychain. Please enter the keychain password.
(2) CalendarAgent wants to use the "login" keychain. Please enter the keychain password.
(3) AddressBookSourceSync wants to use the "login" keychain. Please enter the keychain password.
I can enter my login password and the prompt goes away for a little while, but eventually returns. Or I can click on "Cancel" many multiple times and it goes away for a little while, but returns again.
I want a solution too and hope this additional information will help.

Problem with fading images in/out

I have a product demo that runs from an XML feed. Text is
defined in the XML as are links to external images. When an image
loads it is set to alpha 0 and then fades up to 100 whilst also
changing from blurred to a crisp image using a blur filter.
When I publish the file and preview it there are horizontal
lines of white pixels that that flicker across the image like
interference as it is fading in. Once the fade is done the
interference stops but any visible bits of it stay on screen.
If I run the generated SWF in a browser this does not happen
and so I didnt worry about it. Now though, I am trying to output
the demo as a video clip to run from a DVD. I am using
File>Export>Export Movie and this picks up the interference
as well.
I have tried various compression setting with no luck and am
thinking I might have to use some third party screen capture
software (camtasia?) instead.
Any thoughts?
Cheers all

hi Markus,
found the following in DB:
"Problem Description:
I have my SCC configured with a LabVIEW perforce client. If I open the VI \examples\comm\access.llb\Retrieving Data from Access.vi and then from its block diagram open the subVI with a icons that says "2", then modify the sub VI, I don't get prompted to check the sub VI out. Howewver, if I close everything down and open the Part 2.vi from the GSW, then it does prompt for check out when I edit it.
Steps to Reproduce:
Make sure the prompt to check out SCC config option is set. 1. Launch LV. 2. Create a new project. 3. Add a VI to the project that is in SCC (not checked out) AND has a subVI that is also in SCC (and not checked out). 4. Open the VI from the project. 5. Go to the block diagram of the VI and open the subVI. 6. Edit the subVI. No prompt to check out is presented.
Workaround:
1. Explicityly add the subVI as an item under source. 2. Refresh the dependencies node after adding the main VI."
furthermore I found this link but I don't know if this will help...
greets!

Problem with Titling Build In/Out

Recently, I've created a title with a blur build. After a while, I'll replay my video and find that the last few letters at then of the title line pop in first during the build and then remain on the screen instead of blurring out. This happens with other builds as well. Why is that, and how do I fix that?

hi Markus,
found the following in DB:
"Problem Description:
I have my SCC configured with a LabVIEW perforce client. If I open the VI \examples\comm\access.llb\Retrieving Data from Access.vi and then from its block diagram open the subVI with a icons that says "2", then modify the sub VI, I don't get prompted to check the sub VI out. Howewver, if I close everything down and open the Part 2.vi from the GSW, then it does prompt for check out when I edit it.
Steps to Reproduce:
Make sure the prompt to check out SCC config option is set. 1. Launch LV. 2. Create a new project. 3. Add a VI to the project that is in SCC (not checked out) AND has a subVI that is also in SCC (and not checked out). 4. Open the VI from the project. 5. Go to the block diagram of the VI and open the subVI. 6. Edit the subVI. No prompt to check out is presented.
Workaround:
1. Explicityly add the subVI as an item under source. 2. Refresh the dependencies node after adding the main VI."
furthermore I found this link but I don't know if this will help...
greets!

Spry Menu Bar (horizontal) - Problems with uneveness (height variance) between adjacent items

Hello:
Like many I will confess that I am new to the spry experience and attempting to catch up. I am trying to design a horizontal menu bar that employs a background image (repeating GIF gradient bar repeated along the the x-access) to create a beveled/rounded edge effect. I have another with a different hue that is used on focus and mouse over, etc. While this works well with the drop downs, there appears to be a "boxiness" between adjacent top level menu items and they appear to have slightly different height. This seems to be determined by the text forms the content of any link or menu item. In effect it creates other differences in appearance as the outer most (top and bottom edges) of the GIF appear to be cut off from one menu item to the next. This leaves a very undesirable look to the page as it juts up and then falls back as it the top level item moves across the web page.
The other point I should make is that this problem, although it exists in all browsers to some extent, is most pronounced in IE6 and below. Unfortunately many of the anticipated visitors to this site are forced by their IT department to use IE6.
My question is: can you set a variable that overrides or determines the height of the background of the menu items? Alternatively is there some other way of addressing the problem so that I can get a uniform look as the menu items transition to each other.
Thanks in advance for any help that can be offered.
Steve.

Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
Your question was not asked before
Using the search functionality on forums you can easily find out if your question has been answered before. While you are in search, you can specify the search locations. The Spry forum can be found under:
Adobe Labs > Spry Framework for Ajax
Your question can not be found in the existing documentation
Spry provides you with allot of documentation this can found on different locations. In the sidebar of this forum you can find a small summary of resources that will help you on your way.
If these options do not apply to your question, please be so kind to also supply the following information in your topic together with a clear description of your issue:
What browsers does this issue occure:
example: Internet Explorer 8 on Window 7 and Firefox 3.0 on Mac OSX
What version of Spry are using:
example: Spry 1.6.1 ( the version number can be found in license header of the .css and .js files )
What is the url of your website or page in issue:
example: http://www.example.com/page/in/issue.html
Step to reproduce the issue:
example: Scroll down till you find the header "help", there you will see a Spry Accordion. When you click on it it will not open or close.
So users can provide you with a better answer, without having to ask you for further details.

Problem with parameters and non table based items

Hi,
I have a situation where I have some not table based items on a page (shuttles and select lists). It is parameters that the end user inputs. I have another page with the same items just here they are Display Only and also not table based. When the user press a button I branch from page 1 to page 2 and set the items on page 2. My problem is that the input the user keys in are not copied to the items on page 2. I can see the data in the session state.
I assume that this is a silly question and I have just set Source Used or Source Type wrong one one of the items but I can not get it working. Can anybody help?
It works fine if I use a Application Item and creates a process on page 1 where I copy the item value from the session state but that should be needed right?
Regards Pete

Thanks Scott,
I think I got it working. If I remove all the colons from the data it works. I select several entries in a Shuttle and the result is a colon delimited string of values. If I remove these in a process it works fine. Is there a way of escaping the output from a Shuttle?
Regards Pete

Anybody had luck with there wifi greyed out after update to IOS 7

I've been trying all sorts to get my wifi working on my iphone 4s, been searching the internet to solutions, turning airplane mode on and reseting network settings - didn't work, reseting all settings - didn't work. Some have said that if you erase all content and data, basically a factory reset turning it back into what it was when you got it out the box works, but it doesn't, for starters it still doesn't go back to IOS 6 (what it would of been out the box), its still IOS 7, when you go into setting/general/about section and look at the wifi there is no wifi address. Has anybody had any luck with solving it, tried going through apple but they say because its out of warrenty i've got to pay for a repair, seen as its happened ever since putting IOS 7 on my phone, i see that as apple broke my phone, so they should fix it for free.

This is almost always a hardware problem that requires repair or replacement of the phone. Downgrading to iOS 6 wouldn't help, even if you could. There's a small chance that it can be fixed by following the suggestions in this support article:
iOS: Wi-Fi settings grayed out or dim
FYI, do not try the "freezer" or "hairdryer" methods you may see posted. At best they are temporary fixes and are very likely to cause additional damage to the phone...

Problem with MATNR in greying out sub-items of a BOM material in VA01

Similar Messages

Maybe you are looking for