Hi..I have a requirement to create An opportunity for the multiple campains

I have a requirement to create an single opportunity for the multiple campaingns..how can we do this..??
regards
B.Mani

Hi Nizam,
You can check the component 'BT111H_OPPT' view 'BT111H_OPPT/ItemsList ', context node 'BTADMINI' has onclick action implemented for item list in opporrtunity transaction. In the same way you can do the coding.
Hope this helps.
Regards,
Ruby.

Similar Messages

How to create a playlist for the movies I have?

Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.

Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone.

I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?

I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?
(I tried to just write this as a reply to someone who had already asked the question whos problem was magically solved after posting the question and the site was not allowing me to post to it so here I am)

Additionally, when I try to sort the photos by date to easily extract the newest photos which I have not yet uploaded, it is unable to put them in correct order regardless of the fact that the date is correct. Only the videos end up in chronological order for some reason while the photos stay in order by name.

In Bdc I have huge volume of data to upload for the given transaction

Hi gurus,
In Bdc I have huge volume of data to upload for the given transaction, here am using session method, it takes lots of exection time to complete the whole transaction, Is there any other method to process the huge volume with minimum time,
reward awaiting
with regards
Thambe

Selection of BDC Method depends on the type of the requirement you have. But you can decide which one will suite requirement basing the difference between the two methods. The following are the differences between Session & Call Transaction.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is
not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program.
Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling. It can also be used for real-time interfaces and custom error handling & logging features. Whereas in
Batch Input Sessions, the ABAP program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are not available for all application areas.
synchronous & Asynchronous updating:
http://www.icesoft.com/developer_guides/icefaces/htmlguide/devguide/keyConcepts4.html
synchronous & Asynchronous processings
Asynchronous refers to processes that do not depend on each other's outcome, and can therefore occur on different threads simultaneously. The opposite is synchronous. Synchronous processes wait for one to complete before the next begins. For those Group Policy settings for which both types of processes are available as options, you choose between the faster asynchronous or the safer, more predictable synchronous processing.
By default, the processing of Group Policy is synchronous. Computer policy is completed before the CTRLALTDEL dialog box is presented, and user policy is completed before the shell is active and available for the user to interact with it.
Note
You can change this default behavior by using a policy setting for each so that processing is asynchronous. This is not recommended unless there are compelling performance reasons. To provide the most reliable operation, leave the processing as synchronous.

Creating Enhancement Implementation for the Enhancement spot in ECC 6.0

Hi All,
I have an urgent requirement of creating an Enhancement implementation for the existing Enhancement Spot in ECC 6.0 ..
I never worked on enhancement in ECC 6.0.
There is an existing enhancement spot called "ES_SAPLIQS0" in the package " IWOC". which has got three existing implementations
1. DI_ROT_SAPLIQS0
2. ISU_SAPLIQS0
3. DIMP_GENERAL_SAPLIQS0
I need to create another implementation for the same enhancement spot.. Please let me know the detailed procedure to create the enhancement implementation for the same spot..
Thanks-
Shrikant
useful answers will be rewarded.

First of all find out the include program where you want to write the logic.. Click the spiral button to go to enhancement mode.. then click on Edit > Enhancement operations> Show implicit enhancement points.
This will hightlight all the enhancement points in your include program. Right click on exact enhancement point and select Enhancement Implementations --> Create,, It should give you the same Enhancement spot you are talking about. select that and write the code.. This code will be automatically appear in the same enhancement spot. You can see one more Enhancement implementation in the same Enhancement spot from the transaction code se19.
Hope my explanation is clear, if you have any doubts, send me a mail at [email protected]
All the best.
Shrikant

Creating portal desktop for the user

Hi All-
Please help me out...
1) Could you let me know the detailed procedure ( if possible please provide screen shots) to create "Portal Desktop for the user".
2)Suppose we developed a webDynpro Application and we need to make it Role Based access....please let me how to achieve this..
3)Help me out in creation of "Roles" in Portal Content Development and the steps to assign pages to "Roles"
Regards,
Cris

Hi Cris,
Follow these links for the required info.
Creating Portal Desktop for specific user
Portal Branding for specific user
Creating Roles & worksets
http://help.sap.com/saphelp_nw04/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
Integrating webdynpro in portal
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
Hope I am helpful.
Cheers,
Santhosh

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

jerryfromtorrance wrote:
What version of GB is needed to open .band files created in GB for the iPad.
6.0.2
jerryfromtorrance wrote:
I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
the best you could do is export each track as an audio file from GBi and drop them into your GBX project

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please help

This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~

Has anyone had to create a WSDL for the UCCX API integration?

We are struggling with creating a WSDL for the UCCX API for integration with an external webservice, as the UCCX isn't a true webservice. Has anyone created a WSDL for this type of integration? Thanks!

Thank you Gergely! I don't think I worded this very well. We have an http trigger that accepts several parameters from the client (see screenshot for example). The http trigger works with several other scripts and uses the UCCX API to manage an outbound IVR campaign.
They are asking us for a WSDL for this interaction. We explained that this is not a true webservice; it is a simple POST but we wanted to put it out to the community to see if anyone had any insight/ideas. Thank you again for always taking the time to respond!

No MountPoint for added folder Please create a MountPoint for the remote..

Hi All,
We have already created various DCs on NWDI SP9. Now when we applied Patch SP10, we are running into problems.
When i try to edit the DC its saying that it cant be modifiable and i am shown the below errors in the DTR Console.
" No MountPoint for added folder /dtr/ws/EPDEV09/com.xenergy_EP-ONESOURCE/dev/inactive/DCs/xenergy.com/phaseone/stockquoteportalservice/_comp/src.core/com/x/global/enterprise/portal/. Please create a MountPoint for the remote resource.
Could anyone please let me know how to get rid of this error and can go forward by deploying the DCs
Thanks & Regards,
Raghavendra Pothula

Hi,
If you've already imported the development configuration and none of the DCs have any activities created, then remove the configurtation and re-import it. That should solve the issue.
Hope that helps,
Thanks,
Rajit S

Yoga 11 - can not create an account for the App store,

I can not create an account for the App store, I live outside of the USA and the only address option is in the USA. Can you help me
Moderator Note: Edited subject to match content.

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
I have verified the Microsoft windows 8 app store has different regions listed
And you can connect app store using an existing Microsoft account like Hotmail, msn etc.
Please refer below link
http://windows.microsoft.com/en-US/windows-8/explore-windows-store#1TC=t1
Also if you can share the link or screen shot of the app store to help you further
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Hi..I have a requirement to create An opportunity for the multiple campains

Similar Messages

Maybe you are looking for