Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.
My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.
We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
Similar Messages
-
Can anybody please suggest the way i can get all the indexes on a cache
Can anybody please suggest the way i can get all the indexes on a cache?
Hi,
If you want to just see what there is at the moment, the StorageManager mbean IndexInfo attribute shows the toString() representation of the extractor of each index.
If you want to get it programmatically, you can get hold of it by sending an entry-processor to a key, then casting the entry to BinaryEntry, and calling BinaryEntry.getBackingMapContext().getIndexMap() to get the same Map<ValueExtractor,MapIndex> of indexes which the index aware filters get.
Best regards,
Rob -
i live in Bidar,Karnataka,India.I recently updated my firmware.i dont have an official sim card to regain access and complete the process,can u please suggest me where can i buy an official sim card,please?
From the carrier for your cell phone service.
Allan -
I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?
After install, did you go to Apple menu > Software Update to update your FCE to the latest version?
MtD -
I need to check three comparative conditions and for each status I need to perform some action. can anybody please suggest
Requirment:
Need to check if a numeric value is within a number range by using comparative function. Depending on status i need to ggive a constant input to numeric function.Easiest is suing an array of range boundaries, e.g. as follows:
(Found here)
Now it is fully scalable and independent of the number of ranges. The solution in the earlier post would get complicated quickly whenever the number of ranges or boundary locations changes.
LabVIEW Champion . Do more with less code and in less time . -
I tried opening PS and this message popped up 'Some of the application components are missing from the Application directory. Please reinstall the application.' I cannot find the Reinstall button?
I followed these instructions but cannot find how to reinstall PS. When I click on the membership link the page displays as NOT BEING FOUND.
Quit all applications.
In the Finder, navigate to the Photoshop application folder.
Do one of the following:
If the Locales folder is not listed within the application folder, then skip to Step 5.
If the Locales folder is listed within the application folder, then drag the Locales folder to the Trash.
Choose Finder > Empty Trash.
Start the installer for Photoshop or your edition of the Adobe Creative Suite.
If you purchased boxed software, then insert the installation DVD-ROM into your computer's DVD drive.
If you purchased downloadable software from the Adobe Online Store, then double-click the disk image (.dmg) file or files that you downloaded. (If you no longer have the downloaded disk image file or files, then log in to your account at www.adobe.com/membership to download the installer.) -
In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
Please recomend a solution.
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.pngCan anyone out there please help!
-
im trying to update my iphone 3g and i keep getting error 1015 that its unable to restore it what can i do ive been trying for 3 days now
See Here...
https://discussions.apple.com/message/15341923#15341923
From the More Like This on the right... -
Just updated my iMac to OS X Yosemite and my Photoshop will no longer open. Pop up message informing, Some of the application components are missing from the Application directory, Please reinstall the application. I have the pay monthly package and don't know where to start.
Do as it says: Reinstall the program. Run the cleaner tool and let CC app do the magic.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium -
What now? Can't get a phone number to contact Adobe???????????????
Hey Cal do u have a windows box or apple? Do you have the compressed files from the original download or a backup or image of your computer? Last question for now-please describe the events that led up to the error message in your original question. Like " my girlfriend was mad at me and while I was cleaning up some photos in CS5 she cut the electric to my desktop!"
there is a chance if its a windows box and its running the OS win7, win 8, win8.1 and the systems restore setting turned on that if you can remember the last time(date) that CS5 worked: restore it(the computer) to that date or before that date. Also is there are some other options if its a mac but i need to know the operating system version and other info as to what other software is on your machine plus similar info like sw such as mackeeper, boot camp. parallels that another adobe community member(Bo LeBeau ) alluded to.
Provide me more info and i can/will help you! maybe even a way to minimize your cost of paying for adobe support if that what you wanna do.
Another vector that may be worth the effort is: find out generally or exactly what components are missing/corrupted from the application core sometimes there can be confusion(zip software posing as malware) or use in the mac and windows world of wrong procedures and use of decompression of compressed( ie winzip vs winrar) files that lead to CS5 working and all of a sudden not working. Last even installers can get flaky over time. So i know you wanna handle this so u can use CS5; but I need some more info. Have a good one! later and greater! -
I want to "Move" Application Final Cut X Pro to my external hard drive but when I drag it only copies it. Can I delete it from the hard drive now.
How do I tell Final cut X pro that I want it to use the External drive for all files?Keep the application on your hard drive and when you save files save them to the external
-
In that system Microsoft Framework 4.o and 3.5.1 is installed even then i am getting the error then i uninstalled and again installed framework same error occurring.
Hi Chandra,
As other post, please help to post the summary and detail logs for analysis.
Based on my knowledge, the error “unhandled exception has occurred in your application” always happens along with the following message when installing SQL Server 2008 R2:
“An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
or one of its dependencies. The system cannot find the file specified. “
If you encounter such issue, please perform the following steps to solve it.
1.Go to your app data directory by going to start > run > %appdata% .
2.This will by default take you to the "roaming" folder, go up one directory and move into the "Local" folder.
3. Go to the "Microsoft_Corporation" folder.
4. Delete the relevant folders from the "Microsoft_Corporation" folder.
For more details, please review the following blog.
SQL Server 2008 R2 will not install - Unhandled Exception has occurred in your application
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
How does FIREFOX-TOOLBAR looks like,and where on my page will I see it? I have a lot of toolbars on my page, like, the ZYNGA-toolbar,facemoods, ect..... Before I downloaded the "new version of firefox 4, I had the version 3.16, and had NO trouble at all!
I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet. -
How can I get it to download the patch?
Terminate the process in task manager or turn off Minibridge in the PS prefs and restart your system.
Mylenium -
Hi All can you please tell me solution for this error occurs
I am trying to use Adaptive RFC model am getting following error :
Failed to create new JCO client connection WD_RFC_METADATA_DEST: com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscapeException: Error while obtaining JCO connection.
This error is occuring while i am trying to create JCO connections,
In my content administrator ,message server combo and application serber combo are showing empty why i am not understanding ?
expecting answer asap. useful Answers will be rewarded nicely
regarded
jalandhar.Hi,
Before using the model, u have to create JCO connection in ur application server.
Check these links.
Configuration of JCo
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/frameset.htm
For configuring SLD, check these.
SLD Connection
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
Regards,
Harini S
Maybe you are looking for
-
Adobe Premiere Elements 11 & Photoshop Elements 11 Errors, Downloading Problems, Uninstalling probs
On May 8, 2013 I ordered Adobe Premiere Elements 11 & Photoshop Elements 11. To this day they do not work properly, did not download properly, nor can I get them uninstalled properly to reinstall properly. I have not been able to contact Adobe all th
-
Mac and windows sharing external drive on mac.
I am trying to access my external drive on my mac from my pc. Sharing is enabled but the drive doesn't show up. what are the options to do this? I have tried to find it by name command line in windows but no go. I also tried to mount it to the pc but
-
Haven't seen definitive answer... Hyperlinks don't work
I am using iWeb 08 and I have created a links page (http://web.mac.com/a_arredondo/HarmonicesGaudi/Links.html) and for the life of me I can't get the links to work. They work just fine in iWeb but not on the published site. The underlined titles are
-
Is it possible to get locked objects in passed time?
Hi, I would like to get locked objects in passed time. The oracle version is 9i. For example, Can I get a list locked objects five days ago? Because I would like to keep locked objects statistics? Does these information stored? regards,
-
"Misc error" in Skype_BETA_1.5.0.75, MacBook osx 10.4.7
SkypeBETA1.5.0.75, MacBook osx 10.4.7 What does "Misc error" mean and how do I fix it? After several Skype video crashes and at least one shutdown-start cycles, I was able to connect with my friend in a video conference. After that my attemps to call