I need to check comparative three conditions and for each output I need to perform some action. can anybody please suggest

I need to check three comparative conditions and for each status I need to perform some action. can anybody please suggest
Requirment:
Need to check if a numeric value is within a number range by using comparative function. Depending on status i need to ggive a constant input to numeric function.

Easiest is suing an array of range boundaries, e.g. as follows:
(Found here)
Now it is fully scalable and  independent of the number of ranges. The solution in the earlier post would get complicated quickly whenever the number of ranges or boundary locations changes.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • In workflow need to check in passed validaitons and check out failed once?

    Hi All,
    Can any one let me know is the following requirement possible?
    In workflow can I able to split records based on validation result? I need to check in passed validations and check out failed validations..
    Regards
    Rajeev

    Hi Rajeev,
    You can try out both branch step and validation step and see which serves your purpose better.
    In branch step you can give multiple validation/validation groups,if result is TRUE take the first branch and check in at STOP.
    If FALSE,take dont checkin at STOP,either cascade or Rollback as the case be.Also here you can call the same or other Workflow.The split branches can later be combined using MERGE or Group.
    Other way can be by using Validation step,setup iteration threshold.here failed jobs will be sent to previous step and passed ones will move ahead in WF.Later you can checkin at STOP and failed jobs would still be in WF in checkout state.
    For your reference :
    http://213.41.80.15/SAP_ELearning/OKEC/nav/content/011000358700000601512007E.PDF
    http://help.sap.com/saphelp_mdm550/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
    Thanks,
    Ravi

  • Once and for all - malware protection needed?

    Can anyone tell me - once and for all - if I need to install malware/virus protection on my MacBook Pro and, if so, what is a legitimate and effective product?  I have browsed other discussion threads on this topic and found that the responses tend to be obnoxious and argumentative.  So, I would really appreciate only thoughtful, knowledgeable answers based on facts/data.  Thank you so much for any guidance.

    This comment applies to malicious software ("malware") that is installed unintentionally by the victim of the attack. It does not apply to potentially harmful software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    OS X versions 10.6.7 and later have built-in detection of known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
    The most effective defense against malware is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of trojans, which can only work if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown site, merely in order to use the site, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim.
    “Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Disable Java (not JavaScript) in your web browser(s). Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those versions has bugs that make it unsafe to use on the Internet. Those bugs will probably never be fixed, because those older operating systems are no longer being maintained by Apple. Upgrade to a newer version of OS X as soon as you can.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.

  • HT1229 How do I reduce the size of photo in iPhoto?  The size of my imported photos are 2 - 3 MB and for my purpose I need 200 - 400 KB.  Any suggestions appreciated.

    How do I reduce the size of photo in iPhoto?  The size of my imported photos from my camera are 2 - 3 MB and for my purpose I need 200 - 400 KB.   Scanned copies of older photographs with a size of 100 to 500 KB work very well.  Any help is greatly appreciated. 

    File -> Export and make your choices in the Export dialogue.
    Jpeg Quality and Size will have most effect on file size. Note that 'Size' refers to the pixel dimensions of the photo.
    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch.  I checked the extensions folder and sure enough, the digidesign extensions were left behind.  Can I revert back

    I'm a Pro Tools user, who just did an "Archive and Install" installation of 10.5.8 over my 10.4.11 on my 2 Ghz G5, now Pro Tools won't launch.  I checked the extensions folder and sure enough, the digidesign extensions were left behind.  Can I revert back to the "Archive" of my 10.4.11 System from the "Previous Systems" folder?  If not, what's the point of creating the "archive"?

    Did you select "Preserve User Settings"?
    Archive and Install installation automatically moves existing system files to a folder named Previous System, then installs Mac OS X again. (See tip 3.) You cannot start up your computer using a Previous System folder, nor can you "re-bless" the Previous System folder. (See tip 1.)
    You can choose to preserve your user and network settings before installing. This option automatically moves existing users, Home directories, and network settings. This also skips the Setup Assistant after installation.
    Note: Because the "Preserve user and network settings" option moves, not copies, existing users, Home directories, and network settings, from the Previous Systems folder to the newly installed System, these items will not exist in the Previous Systems folder after the Archive and Install is complete.
    http://support.apple.com/kb/ht1710
    Read this:
    http://support.apple.com/kb/HT2196
    BTW, it is never recommended to do a major OS change without having a full, bootable backup.

  • My old laptop crashed and I need to restore my iTunes music and movies to my new laptop from my iPod Touch. Help please. Thanks!

    My old laptop crashed and I need to restore my iTunes music and movies to my new laptop from my iPod Touch. Help please. Thanks!

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right directio

    Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right direction plzzzzz

    If your iPhone is not recognized by iTunes when connected - not available under Devices in the iTunes source list, check this link.
    http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
    For voice memos, I have include voice memos when syncing selected under the Music tab for my iPhone sync preferences with iTunes which transfers voice memos from my iPhone to my iTunes library when syncing.

  • Using If condition in For EACH Group

    Hi all,
    I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
    I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
    Thanks and regards
    Naveed

    You can add a If condition filed after the for-each field
    for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
    and then add anothet field which has <?end if?>
    Hope this helps.
    Thanks,

  • Do I need to have a different Apple ID for each apple product my family has so we are not sharing contacts

    Do I need to have a separate Apple ID for each apple product we own if I do not want to share my contacts with my children

    Yes. And separate user accounts on the computer if you only have one computer.
    How to use multiple iPhone, iPad, or iPod devices with one computer

  • I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new.  If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

  • I have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser

    i have just synced my iphone to my computer and all of my contacts went onto the computer and off my phone !! i have a mac .when i sync contacts i click on all contacts and only seven are going onto the phone !! can someone please give me an awnser

    When you connect the iPhone to sync with the new computer,  a number of things will happen. If the new computer/iTunes does not contain any music, then yes, you will receive a prompt saying this iPhone is synced to another library, and if you continue, you will lose your music. However, you risk losing a number of other things, such as apps, contacts and calendar data. When you ask about photos, any photos that you have on the iPhone that were synced from the previous computer would also be lost. You need to save the photo folder from the old laptop and transfer that to the new desktop. You also need to sync the contacts and calendar to the same supported application that you were using in the past, such as Outlook, unless you are using an outside web-based sync, such as Google. Also, when you first connect the iPhone, it will make a backup, or at least make sure that it does before you attempt to sync, or you will not have a backup of some of the other things, such as mail settings, SMS, and the contents of the Camera Roll. I would import the photos from the camera roll to the new computer before trying to do anything else in iTunes.

  • Auto Launch Application and perform some action

    Hello Friends,
    I am working on Autoback, want to launch application and perform some action to take backup.
    Can any one please update me what all the J2ME phone supports this kind of feature and basic needs to implement Autobackup, any sample code available please let me know
    Thanks,
    Kumar.M.R

    Something sketchy.
    I had the same message appear. It resized my window to the smallest possible size (not minimize!) and when I resized it larger, it had opened a new tab with that message. It was on "c510a1.minersaver1.com" which sounds like a related site. It tried to download "avmast_2004-4_mst5.exe"and I was going to try and refind this site on my Linux box, but forgot to save the exact URL (oops!).
    Running Firefox 4.0b11 on 64-bit Windows 7 Home Premium.
    EDIT: Found a LIVE link
    http://c510a1.minersaver1.com/defender/?44a=pccfjf&8d1ad=glslkkqpgl&eb45=gpqmpkkcmc&03f67=3

  • Can anybody please tell me what is escapse sign ( check box) external data

    Hi ,
    Can anybody please tell me , What is Escape Sign (check Box) in external data tab in infopackage
    Thanks
    PP

    Hi PP,
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    Example:
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    Hope this information helps u.........
    Assigning Points is the way of saying Thanks in SDN
    Regards
    Ramakrishna Kamurthy

  • Hi guys, my bridge is suddenly telling me i cant edit in raw because a qualifying product need to be launched. can anybody please tell me how to fix that?

    hi guys, my bridge is suddenly telling me i cant edit in raw because a qualifying product need to be launched. can anybody please tell me how to fix that?

    I wonder if this is to do with the Camera RAW 9.0 update.  The timing sounds right.
    Check out your Bridge > Preferences > File association for CR2 files
    You can reset Bridge Preferences the same way as with Photoshop:
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • Do we need to buy the license from SAP for EACH 'Z'form

    Hello
    I heard that, we (company) have to take license for the development of EACH adobe interactive form (even though its totally custom brand-new interactive form created from scratch), on individual form basis, is it true? (i know, its free of cost to play around with interactive forms in DEV and QA, but, if we want to move them to PROD, in that case do we need to buy the license from SAP for EACH form individually?)
    Thank you

    Thats true...license based on end user usage is required for SAP interactive forms. For more information read SAP note number 750784. The license comes in package like per 1000 users one time payment.
    Regards,
    Vaibhav

Maybe you are looking for