Hi I've installed iOS 7 on my iPad and now when I go onto google it rotates automatically and won't change when I hold the iPad sideways,only happens with google?
HI I've installed ios7 on my iPad and now when I go into google it rotates straight up and down and won't change,it only does this in google?
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.
Similar Messages
-
When I sync my ipad I get a message that 25% or more of my contacts will be changed. Contacts on the ipad on the way I want them to stay. What do I do?
What is the exact error. You need to be more specific
-
I have never had any problems before but all portrait photos added today have the top chopped off. For example , people's heads are missing or roofs or buildings are chopped off. Photos are fine on the camera and on my mac in iphoto and aperture. Switched off photostream on my ipad...all photos were deleted. Switched photostream back on and all photos uploaded again and portrait photos are cropped again
It sounds like while trying to import the photos with insufficient disk space those image files were damaged and not copied fully. Now that you have sufficient space (a minimum of 10 GB is recommended) the latest imports are good.
What do you get if you export one of the problem photos out of iPhoto as Kind=Original and try to open it with Preview. If it appears the same then there's nothing you can to do recover them.
OT -
Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
when I try to install ios 6 it from my ipod touch 4G it tell me an error accrued and it gave me 2 choices close or settings . I wanna to know ow to fix this problem
Try installing from your computer instead of downloading straight from the iPod
hope this helps! -
Hi i have a ipad 4th gen i updated to ios 8.0 after it installed it kept turning itself off. A few weeks later i installed a update for ios it turned itself off and wont turn back on. I have tried plugging it into itunes to restore it recognizes the ipad when i press recover it just freezes and wont restore or recover its just a blank screen there is no power light or anything just blank please help with any suggestions, Thanks Rick.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports. Any suggestions?
MacBook Air, OS X Mountain Lion (10.9.1)Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I Tried to update my iPad to iso7 and now all I get is a pic of iTunes and a USB plug. Help what do I do now
You have to connect your iPad to your computer now and restore the iOS software with iTunes. The update went bad. Read about how to do it here.
iTunes: Restoring iOS software - Support - Apple -
I updated my itunes on my ipad and now my kindle and other apps won't open. I restarted the ipad and tried to resynch. Nothing worked. Any other suggestions?
Do you mean that you updated your computer's iTunes or the iPad's iOS ?
If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's happening on all apps then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My screen no longer moves with the way I'm holding the iPad. For example if I'm holding it horizontal the screen is vertical. Up unitl now the screen has always moved with the way I was holding the ipad. Is there something in Settings I can do to get this back?
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left. (IOS 6). For iOS 7, swipe up from the bottom to get to the control center and look for the lock icon in the top row on the right.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the button -
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I just downloaded iOS 6 on my iPhone 4 and now can no longer open internet links that were texted to me. Anyone else having the same problem or know how to fix this?
The SMS links thing is highly annoying. You don't have to copy/paste however. You should see an icon like this: (>) to the right of the text bubble with the link. Tap on that, the in the screen that opens, tap "Visit".
Alternatively, you can tap twice directly on the link, then hold your finger down after the second tap.
Still unnecessarily difficult, but not as bad as copy/paste.
What I don't get is why can't I find any mention of this change or how to fix it (if even possible) elsewhere online? -
I uploaded photos in .jpg format to my iPad, but now all of those photos appear as .ithmb files and cannot be opened, even on the thumbdrive they originated from. How do I get them back to .jpgs?
Sorry, should've mentioned some more information. I synced the ipad to the folder of photos. The original photos had file names like "_MG_4865.jpg" and after syncing the folder in Itunes, all files were now found in a folder called "iPod Photo Cache" which was filled with many folders with labels like "F23" etc. (There were ALOT of photos.) In those folders there are several files with names like "T343.ithmb". Not a .jpg to be found and I can't view any of the photos.
Maybe you are looking for
-
How to get the column values from a BC4J View Table in UIXML?
I am using a default UiXML Application for Order Entry system with Orders & Order Lines & Customers. I have a uix file OrdersView1_View.uix which displays (no updateable columns) all the Orders. How do I get the column value of a selected row in a BC
-
Document merge problem due to embedded fonts
I am trying to merge 6 single page pdf documents into one pdf file. I am receiving this error on two of the six docs: "These documents contain subset fonts that have the same name and cannot be merged" Can anyone help me work through this issue? I am
-
Hello I am having issues with z-index and layering. I have an iframe which is a full screen video acting as a background. I used a spry tabbed panels widget for my tabs and text, and canNOT get it to appear in FRONT of the video. The iframe z-index i
-
Xpybutil - A python library that makes X programming easier
This library is built on top of xpyb which uses XCB. It basically makes quite a few nasty things a bit less nasty. One big example is easy access to ICCCM and EWMH properties on the root and client windows. As a trivial example, say you want to get t
-
Unable to change binding path class
I have been editing a Change Request form in SCSM and need to bind a field to a class that I created. The issue that I am running into is that when I go to select the correct binding path it is not showing me the correct "Target Class" How do I get t