Hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help!
hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help! it was working perfectly fine earlier today.
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Similar Messages
-
Updated ipad yesterday to 7.0.6 and now can't connect to internet. Tried cellular, Verizon and Comcast. Updated 2 iphone 5S and ipad mini today and all work fine. Any suggestions?
Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this. -
I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but it is correct. I have re-set both router and all laptops - no joy. They can all see the network but cannot connect.
This is extraordinary. I have moved the router and also tried resetting it to its factory strings. We have had this router for over a year and all our devices have always worked. Now all four laptops will not connect to the internet. Only one oMac and our phones and iPad.
I have had far more devices running at once before but now all laptops are timing out on connection. Some say this iIP address is already being used but if I manually set to a slightly different IP address it does not help, noir if I manually set to the correct IP address. Why would all our laptops (four) suddenly be unable to connect? -
i cant update to 5.0.1 because it says im not updated to the internet. can someone help me?
Jailbreaking voids the Apple warranty and also means you will not get any support from Apple, including from this Apple forum.
-
unable to connect to the internet via wifi since the latest update
Hello,
Try Reseting your decive, check your settings or manually restore your iphone bu putting it in DFU mode and connecting it to iTunes there are many youtube videos on how to do this I hope it works and wish you good luck with it. If It doest call apple care. -
It takes 8 hours to download the new upgrade for my phone. Then after 8 hours downloading it says sorry there was an interuptions of some sorts. this is rediculous. ive tried 3 times, eating my cap and still no results.. seriously what must i do? Been an anyone help....
Hi there, thanx for the quick reply.
Ok the error code after 8 hours of downloading said error code 9006. I’m not too good withcomputers and I’m really battling with this. And tell me is it really necessary to download update 4.3.3... If I’m having so much trouble it really makes me deponent to try and try again...I have the iphone 4 16 GB 4.3 (8F190) version. Model MC603SO. Itunes10.2.2.14...
And why does it take 6 – 8 hours?
Hope you can help
Kind regrds -
IPhone 3GS stuck and I cannot switch it off. Screen shows an USB plug connecting to iTunes.
My iPhone 3GS stuck and i cannot switch it off. Screen shows an USB plug connecting to iTunes.
this usually appears when your iphone is not registered correctly with apple/itunes so plug it in to your computer and try setting it up if it gives you the correct prompt. if not try to restore and sync. usually tis problem appears when your iphone has no sim card or is not registered correctly. in this case you need to contact your carrier and set up an account. if you are trying to use it without a service or sim card then unless you go through some sketchy program of hacking it it is worthless to you without a sim or service plan. i have the original iphone1 i got from a buddy of mine i used as an ipod before getting an iphone4 and if i took the sim out this message appears. if you do have a sim and a service plan than there might be a problem with the phone reading the sim card you you can go into your service provider's store and request a new sim to see if that works.
I am sorry if none of this is helpful for i have no other suggestions. -
My MacBook pro will not connect to the Internet through wifi yet all other devices do
My MacBook pro will not connect to the Internet through wifi. I have several other wifi enabled devices and they are all connected to the Internet just fine... What could/would cause this?
Disable your AirPort and enable in a second. Or check, maybe you need to type in correct digits in; Settings/Network/Advanced/Configure...
-
We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?
Joining an encrypted WEP or WPA Wi-Fi network
-
I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?
It depends upon how the other machines are connecting to your MBA:
If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them -
If my iphone is connected to the internet via wifi will it use my cellular data if I use it as a personal hotspot or will it use the wifi's internet???
The wireless on my laptop brokebut I can still connect to my phone when I plug it in. My iphone is connected to the wifi but is this being transfered onto the laptop or is it using up my data???Personal hotspot shares your cellular connection with other devices via cable, bluetooth or WiFi. If you turn on the hotspot, the phone will be disconnected from the WiFi network you are on and share access to the cellular connection. That's what it's for. It's using your data plan if that's what you're trying to do.
-
I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??
Welcome to the Apple Community.
You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud. -
My macbook pro will not connect to the internet via wifi or ethernet connection
Hey guys just a few days ago randomly my 2011 macbook pro stopped connecting to the internet. My girlfriends macbook still connects fine as well as both of our iphones and my tv. Under network in system prefrences wifi is yellow and says self assigned ip, however ethernet says that it is connected with a green light but safari nor any other internet using applications will work. I even tried downloading google chrome from my girlfriends mac book and moved to my computer via flash drive but still no go on the internet. Please help me.
-thanksPlease read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy (command-C) the selected text to the Clipboard. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copy-and-paste as well. Omit the final line ending in “$”. No typing is involved in this step.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time you'll be prompted for your login password, which you do have to type. It won't be displayed when you type it. Type it carefully and then press return. You may get a one-time warning not to screw up. You don't need to post the warning. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I was travelling in europe using both by iphone and my ipad.
My kids was using both, not knowing that they was using the internet (3G) for some games.
It would be great if you could see on the apps whether they connect to the internet or not - today you can only guess !Not sure why you've posted this in the iBooks forum. But if you want to leave feedback for Apple then you can do so here http://www.apple.com/feedback
-
What have my iPhone and iPad both suddenly quit connecting to the internet via wifi?
My phone quit connecting to the internet even when connected to an internet enabled wifi network and then a few days later my iPad has quit. I have taken both to other locations where there are wifi networks available and they will not connect to the internet, though they are connecting to the wifi.
Setting/General/Reset - Reset network settings is a good place to start.
Maybe you are looking for
-
I cannot uninstall Firefox and it won't let me install a new version.
Firefox will no longer open up so I can use it to browse. I tried downloading it to reinstall but it tells me I have to close Firefox as it is running. How do I do that? I've always used Firefox as my browser and now, it will not open so I've had to
-
Load and resize a SWF inside a MC
Hi, I'm using AS2 to load an SWF inside an MC. The MC measures 800x600, while the SWF (which can vary in size) measures in this case 14x60, even though, looking at it, it seems to be about half the size of the hosting MC. This makes me think that the
-
Where does iTunes put iPhone backups in a PC (Windows 7)?
Where does iTunes put iPhone backups in a PC (Windows 7)?
-
Implementing day light saving in OBIEE 10g or 11g
Hello guys I am wondering how can we implement daylight savings in OBIEE? For example, we have 2 locales: south america and central U.S & Canada. They both are GMT -6, but when we actually change the locale to either, there are difference at this tim
-
Dynamically need to change the report value reference names
Hi Forum, Greetings to all !!! I have to create one report(document summary report) and the parameters are Document type(Special Information name through lov) and start date and end date. Based on these parameters it will fetch only that document det