Hi there, I'm using iOS 10.10.3 and the thing is that Keynote app is not free for me. It supposed to free for iOS 10.10.3 Thank You.
Hi there, I'm using iOS 10.10.3 and the thing is that Keynote app is not free for me. It supposed to free for iOS 10.10.3 Thank You. BTW my device is MacBook Pro Retina Display 13.3 mid 2014.
iOS? I believe you mean Mac OS X 10.10.3
Keynote is only free to purchasers of a new Mac within the first 12 months of purchase.
Upgrading to Yosemite on older Macs does not qualify itself for free upgrades of Keynote.
Similar Messages
-
hi there, I im 13 years of age and i recently changed my passcode but forgot it and ive tried to back my phone up and i dont really want to restore it without backing it up and i need to type in my old passcodeto back it up ! any suggestions? thank you very much appreciate your help
If you've never synced while this passcode was enabled, you will not be able to backup now without first entering the passcode. bbfc's post is incorrect.
You will have to force the phone into recovery mode & restore it, as described here:
http://support.apple.com/kb/ht1212
If you don't have an existing backup to restore to your phone, then you will lose all of your data, as your only option will be to restore as new to remove the passcode. -
Any advice would be helpful regarding this subject.....
You can start by upgrading your RAM. An advise would be to buy it from internet, here is a good page for that: https://www.ifixit.com/Store/Mac Along with some useful manuals for doing the upgrading yourself
-
As I try to download apps (e.g. Skype) for my new iPhone 5s, using my existing apple ID, it gives a message that my id is not valid for US store and I need to switch to Bangladesh store. There is no bangladesh Store. I created my id without credit card (payment option-none). How can I now downlod from itunes/apps store?
If you're in Bangladesh, then there is no iTunes Store that you can use. Each country's iTunes Store is limited to those actually in that country. E.G from the terms of use for the iTunes Store:
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.
When or indeed if Apple will ever be able to open an iTunes Store in Bangladesh no one here will know.
If you are physically in the US using a US-based account, post back and we'll go from there.
Regards. -
hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's
when you connect your phone with your computer and use itunes you can click on the phone
and click on an update button
about facebook games then think they are all flash based and iphones cant do flash so thats not possible -
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
Hello, i lost my iphone5 32gb and i want to track it but the thing is that in my iphone5 i did not setup the find my iphone application :'( ...so, is there any option where i can track my phone or block it that nobody can use it..please help me out
Unfortunately if you did not set up 'Find My iPhone', there is no way to remotely track or wipe the device.
-
sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.
sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
i just updated my ipod 4g to ios 5.1 and i cant download apps a message pops up saying to type in password for caldav something something the thing is that i have no idea what my password is i never made an account for that so please help
Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup. -
I have a 16GB 3GS phone since about20 months now. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it. I always used standard headphones and charging cable. Now when i recall, it started at one of the sync sessions with my itunes. I have turned my phone off and aon again and again but the message keeps coming every one or two minutes.I have also started loosing voicce on different applications like youtube etc. Also the ringer volume up and down key does not show me the small boxes increasing or decreasing on screen. The phone is playing crazy. Can someone help please
Thanks
ZiaIt helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??
Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.
-
I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?
Hi peacemakerco,
Thanks for visiting Apple Support Communities.
You can use the steps in this article to sign in on the iPhone with the right Apple ID:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Best,
Jeremy -
Is there any way to get Mini Bridge to show the color labels that are set in Bridge and/or Lightroom?
I am using Cloud InDesign CS6 on Windows 7.You will need to go via your computer's iTunes - to get music into the Music app you either need to download it directly on the iPad from the iTunes store app, or sync it from your computer's iTunes
-
I think my spouse is using apps like YouMail and many more to throw me off her real location and different things of that nature. How do I tell if I'm miss informed?o
I suggest you talk to your spouse: honest communication is the only approach when this kind of question bothers your mind. There's no way that anyone here can tell you anything useful.
Maybe you are looking for
-
Compilation error while generating the form in linux
Hello everyone, I am using Oracle Designer ver10.1.2.4 in windows to generate the forms with standard object library ofgwebol.olb and template form ofgwebt.fmb. form (with both .fmb and .fmx files) are generated without errors. Also when I open the f
-
Report On Receipt Of materials for a material Group
Dear All, I have a requirement. I want the value of goods receipt for a particular material group for a particular period. MB51 does not provide input for material group. I have seen other standard reports related to purchase , b
-
An unknown error occurred (9)
Hello everyone, I just recently bought an iPhone 3gs. Everything has been working fine over the past two weeks. Then, last night, I plugged the iPhone into my Mac to sync it. Then, as it was syncing, it went to the Apple logo. I immediately went onli
-
Exporting / Importing into DVD Studio Pro from Final Cut Pro
Hi All, I am am exporting footage from FCP HD and importing it into DVDSP, the final DVD will be set to 16:9. So what do I export my files from FCP as? Someone told me that I don't export it at 16:9, I export it so it's squashed and then DVD SP does
-
why not support