Hide 1st page in form, is it possible?

Hello, I have a 4 page form that I have pages 2-4 hidden until a selection is made from page 1.
My question is, is there a way to hide the 1st page after the selection is made which shows other pages in the form?
When I try to hide the 1st page, it shows as a blank page using: MainPage.presence = "invisible";
Is there any code that will completely remove the 1st page and not just blank it out?
Thank you in advance for any insight!

Hi,
You need to use the presence "hidden" to exclude it from the layout. Note you cannot hide all pages.
Hope that helps,
Niall

Similar Messages

How to dynamically hide the Field Label in the overview page's form view?

Hi Experts,
How to dynamically hide, for certain condition, the Field Label in the overview page's form view?
Please reply me.
Regards,
Vishal

Hi Vishal,
It is not possible to dynamically hide/display fields if the UI is build using configurations.
The work around is to have multiple configurations, and based on the condition, load the
corresponding configuration at runtime.
The other approach is to code the complete htm view(htm coding) without using the configuration provided by the framework.
Regards,
Leon

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

What is the function to hide all pages in a form?

Hi
What´s the function that I could use to hide all pages in a form?
For example: when an user to click in a button, I would like to hide all the pages of the form.
Thank you.

Hi Niall.
Niall, I am sorry to up this post, but just today I had time to work arond my form.
So, I tryed to use your example using the function, but I couldn't to do it works.
What's part of form I have to put this script:
function hidePages()
for (var i=1; i<=25; i++)
xfa.resolveNode("page" + i).presence = "hidden";
What language do I have to use (FormCalc or JavaScript)
Thanks so much

Text to flow 1st column 1st page TO 1st column 2nd page - IS IT POSSIBLE?

Pages 2.0.1v2 en Mac OS X 10.4.7.
I would like to have a 2-column document, where the text flows independently within each column across the pages of the document. That is, when the text of the left column, first page, reaches the end of the first column, first page, I would like the text to flow to the beginning of the left column, page 2. Instead, Pages flows the text to the right column, page 1.
Is that possible.
Thanks.

I'm not a hundred percent sure that I understand you, but I'll take a stab at it. I think what you're asking for is text overflow from column 1 on page 1 to column 1 on page 2. And then the overflow from column 2 on page 1 to column 2 on page 2. Is that correct? If so, insert two independent text boxes on page 1 (make sure you use the Wrap Inspector to define them as Fixed on Page), and from them create linking text boxes on page two. I tested it and it seems to overflow nicely.
That's the good news. The bad news is that you'll have to do this manually for 400 pages, since there doesn't seem to be an automatic way to accomplish this. I even tried copying and pasting a linked box, and the resulting pasted box would unlink each time. So unless there's something I'm missing, it would seem that the process (tedious in your case) is to place two text boxes on page 1, then manually click on the blue "ears" to create the linked boxes for the next page. But I can't imagine you'd want to do this 400 times.
-Dennis

Hide a page at run time

Hello,
I'm new to LifeCycle Designer. I'm developing a form which is structured as follows-
Body page 1 -> Place: on Master Page 1, After : Continue Filling parent
Body Page 2 -> Place: on Master Page 2, After : Continue Filling parent
For a certain condition I don't want Body Page 1 to be displayed at all. But still the Body Page 2 should be on Master Page 2 (and should be the 1st page to be displayed).
I tried following in the form:ready event of Body page 1 (formcalc @ client) -
if (coverpage_type eq "without_coverpage")
then
$.presence = "hidden"
endif
But it shows up the 1st page as blank page (does not hide it completely).
Can you please suggest what should I do to make this happen? Please send me the script code snippet if possible.
Any help would be appreciated as I've already wasted 2 days trying to find a solution :-(.
Thanks,
Vimukta

An external page break can be triggered by using the Edit button in the Pagination Tab of the Object palette.
        Click on the Edit button, press the PLUS symbol to add the script.
    Below that select the Break radio button either before or after depending on the requirement and then in TO: select the Top of Next Page. If you want to display header and footer of the table in the next page s also select the Trailer and Leader sub forms.
<a href="http://img216.imageshack.us/img216/1807/image002lu3.jpg">screen shot</a>
or
To trigger External Page Break:
   Depending on some condition, if you want to trigger a Page break, add the below script to the table subform where the page break has to be trigger. If the hierarchy is as below, then add the below code on the table subform.
           Table
                Table_Header
                 Table_Data
    Var   recnt =   $.data.all.length
     For I = 0 upto ( recnt   - 1 )   step 1 do
     If   ( Condition ) then
          $.data<i>.break.after = pageArea
          $.data<i>.break.startNew = 1
     endif
    endfor
    if you are getting an empty page at the end, add the below script to the table subform.
$.data[recnt-1].break.after =
$.data[recnt-1].break.startNew = 0
          This will suppress the blank page, which is generating because of external page break coding.

How to print the Actual Check on 1st Page if line items are more for F110_p

Hi,
How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
I tried using
IF &PAGE& EQ '1 '
/E 545 --> text element
ENDIF
but it is of no use.
Please let me know if anyone knows. Thanks in Advance.

Hi Krishna,
I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
IF &PAGE& = 1.
**PRint all check values..
ELSE.
***Print void values
ENDIF.
Close the thread if your question is answered.
Regards,
Sairam

Line item data does not appear on all master pages - Adobe forms

Hi Guys,
I have a problem in Adobe forms as explained below-
I have a page in the form which has, you can say, a 2 windows or subforms ( Information window/subfirm on top right corner, main on middle of the page ). The data of the main subform is a line item data of delivery. Some parts of the same data need to be printed on the Information subform also. The main subform can overflow to next pages but the information window will have only very limited data to be printed on one page itself, meaning it does not overflow.
Now the requirement is that each line item should be printed on a new page. For example if there are 2 lines items then first line item should be printed on first page. Then there will be a conditional page break and the next line item will be printed on the next page ( I have achieved this using condition page break). The information window will contain information related to corresponding line items. If the first line item data overflows in main then information window of first line item should be printed on first and 2nd page. The second line item should start printing on 3rd page and information window of 3rd page will contain data of 2nd line item.
I created 1 body page and 1 master page. I created one internal table with data of main window and information window. I put the information window on master page to make it appear on all the pages.
This solution unfortunately does not work. The issue is that in case of overflow, 1st page information window shows first line item. 2nd pages shows 2nd line item and 3rd page is blank whereas ideally 1st and 2nd page information window should show first line item and 3rd page should show 2nd line item. This means that master page and body page are not getting linked. If I create the information window on body page itself, it does not repeat on all the pages. Please provide some inputs to resolve the issue.
Thanks
Abhi

Hi Abhinav,
I am also trying to solve the similar issue. Need to print the internal table data in the Master page.
Have you resolved this issue. Can you Please share your solution .
Thanks
Swarna.

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

How to hide Header Page in Report Builder 6.0

Hi,
I am trying to modify the existing report. My requirement is to add a cover page to the report. Based on condition the cover page should not be displayed.
Ex: If currency='USD' then
cover page along with the report body
else
if currency = NULL then
report body should be displayed.
I wrote a format trigger on cover page frame. but it is displaying blank page as first page. It should not display blank page.
Format trigger:
function M_Cover_Page1FormatTrigger return boolean is
begin
if (:CP_currency IS NULL)
then
return (FALSE);
end if;
return (TRUE);
end;
Please help me out how to hide header page in report.
Thanks & Regards,
Sateesh kumar S

Patchset 1663658
Simple Search Advanced Search Quick Links Saved Searches
Description Forms & Reports 6I-PATCH-4 for (NT,95,98,2000)
Product Oracle Developer Family
Release 6i
Platform or Language    -------- Platforms --------Microsoft Windows (32-bit)
Last Updated 11-MAY-2001
Size N/A
This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch.
Reason for Obsolescence
Forms&Reports 6i-Patch-4 for WindowsNT has been obsoleted, owing to the fact that a later verison, <b>patch-4a is now available for download via metalink</b>
Patchsets known to include or supersede Patch 1663658
No information available from the patch repository
Download Notes
Click here for the UNZIP utilities for most platforms.
You may also download patches using any FTP client by connecting to updates.oracle.com. Connect with your Metalink username and password and read the welcome banner for more instructions. Looks like you want patchset 1747364 now. As soon as you get into Metalink, change the Quick Find drop down to be "Patch Number" and put "1747364" into the search text box. This should pull up the patch you need.

Hide Master Page

Hi Folks,
I have a page with fields in design view, which is placed in the content area of the master page.
Now, i want to hide this page based on a condition. I am following the below steps to hide it.
I am writing the below code in the design view page (initialization event, form ready event).
if ( $.HIDEPAGE_FLAG == "X" ) then
$.presence = "hidden"
endif
The fields present in the design view page are hidden, but I am getting a blank page. I am not able to hide this blank page.
Can you guys tell if i am missing anything here/how do i hide this blank page ?
Kind Regards,
Chaitanya

Hi Chaitanya,
Instead of hiding the master page, dont trigger it. Please find below link, which is used for dynamically trigerring master pages using subform property
Using Subform to trigger Master Pages dynamically
If you have only one master page and you dont want to trigger it.. while trigerring form from driver program, don't execute it based on the condition and just print a message accordingly.
Please let me know, if you see any issues in above procedure
Thanks,
Rakesh

Hyperion planning - match variable from BR with page on form

Hi gurus,
I have a problem with matching variable which I create in business rule to page filter on my form. I want to make business rules that use member which I choose from page in form. I create RTP variable but that is not what I need because when I pick RTP attribute for my variable then on call Business rules I need to choose member again.
Thanks

You can use hide prompt in Business Rule properties (when you add the rule to form). See if that works, else you'll have to hide it in Calc Manager itself.
Regards
Celvin

Hide the page in the URL?

Can one hide the page from showing in the URL? As in WWW.MyWebsite.ca/pages/images/summer2014.php to just.. WWW.MyWebsite.ca

You still have not answered the question why you are trying to do this in the first place. If you are trying to make it so someone cannot guess the link that will change someone elses password, there are ways to do that, but the method you are trying won't work.
Only for cosmetics. In my opinion a URL of www.mysite.ca looks better than www.mysite.ca/index.php or www.mysite.ca/index1.php There is nothing to "guess" at, if someone goes directly to www.mysite.ca/index1.php they will be rejected if there is not an appropriate cookie on the users machine. Once a user is "inside" I have no problem displaying the actual page name.
Hiding the trailing part of the URL is just something I have noticed is possible from some sites and wanted to see if I could incorporate it in mine

Redirect to a custom error page when Forms Server shuts down

Hi,
I want the forms application to redirect to a custom error page whenever Forms Server goes down. (like network issues, unscheduled shutdown...) Whenever this happens, the user gets a pop up with FRM messages and user has to acknowledge the pop up. Since the application is used in the shop floor, there will not be any user always in front of the screen and will be a very big issue as there are at least 70-80 PC's on the floor which will be attended fewer times(only when there is issue with the machine) other wise the application displays important events of the machine,etc.,
I am trying to develop a simple HTML error page(may be with applet) which will keep querying the forms server and once the forms server is up and running, the error page will revert back to the application which the user was working earlier to shutdown. Other option is the redirect to main menu of the application (this may be a PSP or a JSP or a Oracle Forms Menu ).
Is there any event in forms to capture the loss of connection to forms server ??
BTW, I am using Oracle Application Server 10g Forms and Reports on Windows 2000 Server...
Any ideas...
Thanks in advance
Purush

I don't think it will be easily possible in Forms for a couple of reasons.
1. In Forms you do not have query rights, and as soon as you want to edit data, you have to log in. In Forms you log in once, and this sets your rights for the whole session. You will have to do some programming in Forms to achieve what you want. E.g. as soon as you hit the Save button you are asked for a username and password.
2. A refresh cannot be done in Forms. Remember that Forms is a Java applet. The URL in the browser is just pointing to the startup page only. If you refresh your screen, you are taken back to the login screen of Forms again.
Well, there will probably be ways around these problems. I'm thinking in the line of calling every form in a separate URL instead of starting a Forms application where one form is called from another form. The default 'query only' form can be called from a startup html page. This page can be refreshed. As soon as the user wants to update data, he clicks on a link or button and is taken to a login form.
If the refresh is unsuccessful you are taken to a custom error page, like in your ASP application.
A problem with an automatich refresh may be hanging sessions. Forms server does not always kill sessions.
And also, how would you avoid a refresh if a user is currently using the form?

I have a problem how can I solve it I want give permissions to groupA to edit the people picker and I want to restrict groupB to edit the people picker what is the solution boss.. in InfoPath form is it possible..

i have a problem how can I solve it I want give permissions to groupA to edit the people picker and I want to restrict groupB to edit the people picker what is the solution boss.. in InfoPath form is it possible..

Hi,
To hide/disable controls based on user group in an InfoPath form, a solution is that we can call User Profile Service to check the group of current user, then hide/disable
specific controls by setting some rules in form.
Here is a demo with steps in details would be helpful to you:
http://blog.symprogress.com/2011/05/infopath-list-form-hidedisable-fields-based-on-sharepoint-group-membership/
More information about checking if a user is a member in a SharePoint group within web InfoPath 2010 forms:
http://www.hishamqaddomi.ca/spg/index.php/sharepoint-2010/infopath-2010/65-checking-if-a-user-is-a-member-in-a-sharepoint-group-within-web-infopath-2010-forms
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Hide 1st page in form, is it possible?

Similar Messages

Maybe you are looking for