Hide the Table entry

Hi all,
I need to maintained the passwords in the table, while maintaing need to take the case sensitive.
But it is taking CAPS. and It should not visible in the display mode. is it possible.
Regards,
Sri

Yes. If you want to make it case sensitive, then set this flag in the domain of the corresponding field.
If you want to mask the contents of the field, then in PBO, modify screen field properties as follows:
In screen layout, set the screen group (1, 2, 3, or 4) of this field (column) as, say PWD.
In PBO add the following line..
MODULE MASK_PASSWORD.
Add the following code to this module:
LOOP at SCREEN.
screen-active = 1
screen-input = 1..
screen-output = 0.
screen-invisible = 1.
modify screen.
endif.
ENDLOOP.
This will make the entries in the field (or all fields with screen group = PWD) show as '*********'.

Similar Messages

  • How to hide the table header if no data present

    Hi
    I need to hide the table header if no data present. Table has 5 column. if no any clolumn has data then this table section should not be display.
    i am using <?if:count(Installation_Event_S19)= 0?> but this is not work for me.
    Could you please help me out.
    Thanks
    Indrajeet Kumar

    Hi Priya,
    Thank you very much !!! its work fine.
    Thanks
    Indrajeet Kumar

  • Can we hide the tables and columns from subject areas in the front end

    Hi,
    Is there any way to hide the tables and columns from the subject area in front end.I need to create a report with some tables which the user does not want to see.So after creating the reprot can I hide those tables and columns in the front end

    Hi,
    Your question is not that clear to me...do you want to hide the entire table/column that dont want to show up in the front end then you could do in Presneation Layer in the RPD by going Permissions in the property of that object.
    But if you want to hide the column in the report that can be visible in the subject Area: go to column properties -> Column fomat...thereis Hide option.
    Can you please elaborate your question...what exactly you are looking for...
    --SK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Hide The Table in Table-Control Dialogue Programming

    Hi all,
    How to hide the TABLE itself (not the columns only but the whole table completely) in table-control in dialog-programming.can any one please help me.....
    Regards,
    Biswajit

    Hi,
    use the screen table.
    delclare as a "table" for the  group properties of that table element.
      LOOP AT SCREEN.
    if screen-goupt1 = "table"
       if the pushbutton = 'HIDE'  
            screen-required = 0.                            
            screen-invsible   = 0.                         
            screen-input    = 0.                          
            MODIFY SCREEN.
       ELSEIF  the pushbutton = 'SHOW'
            screen-required = 0.                           
            screen-invsible  = 1.                            
            screen-input    = 0.                           
            MODIFY SCREEN.
         ENDIF.
    endif.
        ENDLOOP.
    it solves your problme.
    Thanks

  • Hide the table view in OBIEE 11g

    Hi All,
    The requirement is to hide the table view and display only the export link on the Dashboard. This could be achieved in 10g by inserting display:none CSS style in each column property. Tried the same in 11.1.1.3, the data is hidden but it still shows empty cells on the screen. Any thoughts?
    Thanks,
    Swati

    Hi All,
    I have got the following code. It works fine ane directly opens a excel with the data. But it does not pass the prompted value. How do i pass the value so that the exxcel contains filtered data?
    <>div class="XUIPromptEntry minibuttonOn" ALIGN="left"> <> a href="saw.dll?Go&Path=%2Fshared%2FData Dump&Options=d&Action=download&Extension=.xls" >Download<>/a>"
    Regards,
    Swati

  • Hide the Table Row Scroller

    Hello ,
    I am on EP7.0 NW04s and want to hide the Table Row Scroller ...the one which says "Row 1 of 4" for eg: ....is there any table property I can modify to achieve this..
    Any help would be highly appreciated.

    Hi Subahsh,
    For Hiding RowScroller, footerVisible setting will not work.
    If you want to hide the Row scroller then do following steps
    (1).IWDTable t = (IWDTable)view.getElemnt("Table");
    (2)t.setVisibleRows(2);
    (3)then delete the rows which you do not want to show..
    and before deleting copy it some where.
    Or the other way to handle the problem is :-
    TableNode----
    > ActualNode create both in the context
    Keep all contents in your actual Node.
    And when you want to update the number of rows...
    then invalidate TableNode( it will clear the table node).
    And the again copy Elements from ActualNode.
    And keep a count of the number of elements, set the visibility of row to that count..
    In this way the scroller will never come...
    See basic of this concept is that you have to keep the VisibleRow setting same as number of elements in your table.
    feel free to ask queries
    Regards,
    Praveen
    Message was edited by:
            Praveen Kumar Pandey

  • How to hide the table control column in module pool

    Dear Experts,
    Please help me on this
    I have 2 screens 9000 and 9001 . In screen 9000 I have 2 radio buttons if I select the 2nd radiobutton then the screen  9001 should display inthat some column has to be hide inthe table control. I have used this code but still it is not hiding please help me on that
    I used this code in PBO of 9001 screen
    LOOP AT SCREEN.
        IF wopr = 'X'.
          IF screen-group2 = 'ABC'.
            IF screen-name = 'ZMMT_EKKO-MATNR' or screen-name = 'ZMMT_EKKO-BANFN'.
            screen-active = ''.
              screen-invisible = '1'.
              screen-input = ''.
              MODIFY SCREEN.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    Even I tried this code also in the same screen 9001
    loop at tbl_rfq-cols into cols.
    IF wopr = 'X'.
    IF screen-group2 = 'ABC'.
    IF cols-screen-name = 'ZMMT_EKKO-MATNR' or cols-screen-name = 'ZMMT_EKKO-BANFN'.
    cols-screen-input = '0'.
    cols-invisible = '1'.
    endif.
    MODIFY tbl_rfq-cols FROM cols INDEX sy-tabix.
    endif.
    endif.
    endloop.

    Hi Balaji,
    To hide a column in a table control on screen.
    In the PBO of the screen, inside
    loop with control <tab_ctrl_name>.
    module modify_tab.
    endloop.
    Say for a column, you take group1 as 'ABC'.
    In this module you can use the group for the input/output fields and the display/hide them as per your requirements.
    if <condition>.
    loop at screen.
      if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
       screen-invisible = 'X'. "hide a column
       screen-active = ' '.
      endif.
      modify screen.
    elseif <condition>.
    loop at screen.
      if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
       screen-invisible = ' '. "display a column
       screen-active = 'X'.
      endif.
      modify screen.
    endif.
    Similarly, you can use this code for other columns also.
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • How to see the table entries after creating the tansaction XD01

    I creat customer initial screen through Transaction XD01.
    After creating customer initial screen how can i see the yable entries.

    Hi,
    The customer entries are stored in table KNA1.
    Regards,
    Himanshu

  • How to enter the table entries?

    Hi All,
                   Can anybody please tell me how to do a table entry. Ex., something we were trying in MRKO transaction. System gave the status as " entry ..... is missing in table T052 ? what I have to do now.
    regards
    Annu

    Hi,
    T052 table is for payment terms.
    Goto OBB8 t.code, maintain entries there.
    I think you have not maintained payment terms in your consignment.
    Regards,
    Chandra
    Edited by: chandra sekhar S on Sep 18, 2008 8:39 AM

  • Delete the table  entries on db2

    Hi,
       when iam applying pathces iam getting dump,i want to delete the entires on pat01 table,whats the command to see the tables and delete the entry on pat01,02,03 tables.
    Thanku

    Hi Kumarraju,
    To get the tables in a database you can use the following command
    db2 "LIST TABLES"
    The LIST TABLES have many options, with which you can restrict what will be returned. Execute the command to see them:
    db2 "? LIST TABLES"
    Besides, pay attention to the Type column, which indicates whether the object is a table or a view.
    Regarding your second question, I can't follow you: do you want to delete the entries in a table ?
    Best regards, Edgardo

  • Find User Created the table Entry

    Hi All,
    This is my scenario , I've one Custom Table ztable which is there in the quality system and entries will be made in the table and it would be transported to the production system. Now My problem is this I've received one wrong entry in the table because of that i'm getting short dump in one of my application. Is there anyway to find out who has made the entries in the table and transported it. Table doesn't have entries like created by or created date like what we have in standard tables. Considered that tranport would be within a month.Your Solution is appreciated.
    Note : This is regarding the table contents not table.

    Hi Anand,
      Do the below.
    First go to Se16 and give table E071 and in the 
    selection  screen give Object = 'TABU' and Obj_Name
    = your Ztable name. It will give you all the
    trasport requests which are used for transporting table
    contents of you Z table. Then take the latest request
    and go to table E070  and give the request and check
    the entries, it will give you who created the request
    and when it is trasported like deatils.
    Hope this will help you , just give atry. But you will definitly know who tranported the table contents, it will give you the user id.
    Thanks & Regards,
    Siri.
    Message was edited by: Srilatha T

  • Loop the table entry and for every entry perform some action.

    Hello Experts,
    I have a requirement where there are let say n no. of entries in my ITAB and now for every entry i have to check certain field value and based on that i have to send respective mail.
    Now this has to run in background mode and the job will run on daily basis so the entries of table that are already processed should not be reprocessed.The scenario is every day the new entries will be added to ITAB and the newly added entries should be processed only.
    Please provide some sample code if possible.
    Thanks,
    Naveen

    Hi,
    I can not add a new field to the existing ztable. Crating a copy of ztable with addtional field status and setting it as processed against the record whenever i populate ITAB from ztable could be a solution but seems very lenthy method.
    There is one filed zdate  so write the code as below:-
    loop at itab where zdate = sy-datum
    email code------
    endloop.
    OR can i make use of
    loop at itab into wa
      ON change  of <filed1>
    email code-----
       ENDON
    endloop.
    Thanks,
    Naveen

  • Please help me- hide the table in xml template

    Display the PDF output sum table not a return any data, I want to hide that table's
    Edited by: 991575 on Mar 4, 2013 1:12 AM
    Edited by: VEERUAPPS on Mar 31, 2013 10:05 PM

    Hi ,
    1.If bi is integrated with bo then you create YTD variable using customer exit as processing type in BEX report and use this variable in WEBI Report.
    2.You create one variable for start of the year by using concatenation function("1/1/2010") and create on variable for current date and use the between function in the prompt in the webi reports.
    Hope it will give some idea.
    Regards,
    Ramnaresh.P.

  • How to hide the table gris in AW6, wordprocessor

    For the life of me I can't work out how to do this. I've created a flier using different table fields to contain various fields of text & graphics. Now I come to print the page, I can't get rid of the layout lines, by which I mean the lines of the table. I assumed they could just be switched off.
    Can anyone suggest how to do this? The option seems to exist in other AW packages but not Word Processor.
    Or: Which application should I have done this in? Is there an equivalent of MS publisher?

    It can be done, but not as easily as I would think. I created a small table in an AppleWorks word processing document to experiment with. I could not select more than one line at a time, although I'm sure I've done it before. I have the table as a floating object & have selected the second line (it's now dashed). I have now selected "none" for line width & then clicking elsewhere in or outside of the table will show the line is now invisible.

  • How to delete the table entries (created data )

    in which table the created data will be get stored i need to delete it programitically can any one help me out in this, plz tell me the table name where the created data will be get stored.

    Hi
    Rocky
    use the delete statement
    the information regarding delete is
    DELETE dbtab
    Syntax
    DELETE { {FROM target [WHERE sql_cond]}
           | {target FROM source} }.
    Effect
    The statement DELETE deletes one or more rows from the database table specified in target. The rows that are to be deleted are specified either in a WHERE condition sql_cond or with data objects in source.
    System Fields
    The statement DELETE sets the values of the system fields sy-subrc and sy-dbcnt.
    sy-subrc Meaning
    0 A least one row was deleted.
    4 At least one row could not be deleted, since it was not found in the database table.
    The statement MODIFY sets sy-dbcnt to the number of deleted rows.
    Note
    The rows are deleted permanently from the database table in the next database commit. Until then, you can cancel the deletion in a database rollback.
    plzz reward if helpfull dont forget to reward if helpfull..
    for any further quiries my mail id is
    [email protected]

Maybe you are looking for