Hide/Unhide a Field

I'm stumped. I've created a check box, and in the I have "Mouse Up" to show a hidden field. But when I uncheck the box, the field stays visable. I am very novice and could use some advise. Thanks!

Using a checkbox to show/hide fields can be done but not using a mouse up event as that will make it a permanent one way change. Instead you can use two buttons one to hide a specific field and one to show it. Alternatively you can use a checkbox and with a little javascripting make it work. c1 is the name for my checkbox and Text 2 is the field I want to hide or show. I also gave my checkbox an export value of 2 just arbitrarily. By placing the script in the calculate field of Text2 it will determine if the checbox is checked by testing to see if it has a value of 2, which it will only have if checked. If it does then the field is hidden if it does not then then field is visible. It's a start.

Similar Messages

Acrobat Forms - javascript to hide/unhide text box if any one of a number of radio buttons is enable

I have a form which I am designing in Acrobat 9 which has a section where there are three questions, each with a pair of radio buttons - one for 'yes' and one for 'no'. They are in the style of a check box (with a tick). I need some help to write some code which will unhide a single field (or multiple fields if I need to use something similar at a later date) if any one of the 'yes' radio buttons is checked. So if all three radio buttons were checked, the field would be hidden but if you then changed your mind and clicked a yes button, the field would be visible.
I am new to this so any help would be greatly appreciated. Many thanks in advance! I hope that i have explained this clearly btw.

For ease of maintenance you might want to make the above script into 2 doucment level JavaScript function. One could set a return value to the result of the caparison and the other could show/hide the text field based on the result. Then a call to the show/hide function could control the show and display of the field(s) and and a call to the function for the results of the comparison could be used anywhere else and not change the field display property.
funciton Test3RB() {
// set logical result based on result of test
var bReslut = ((this.getField("rb1").value == "Y")|(this.getField("rb2").value == "Y") |(this.getField("rb3").value == "Y"));
return bResult; // return value of logical test
} // end funciton
function ShowText() {
// assume field not to be shown
this.getField("textbox").display=display.hidden;
if (Test3RB() ) {
this.getField("textbox").display=display.visible;
} // end if true
return;
} // end ShowText function
You mouse up action for each button could be:
ShowText();
And if you could test the logical value returned by the function somewhere else and did not want to modify the display field:
if(Test3RB() ){
// action for true
} else {
// action for false

Page hide Unhide in acrobat

Is it possible to hide/unhide page in acrobat? How can I do?
Can it work in reader?
Please help me....

As it has been said, Acrobat can do it rather easily.
For Reader, there are some possibilities.
• You have access to the Reader Extensions Server (or whatever they call it today), and then you can spawn Template pages, and delete them again in Reader.
• You work with "virtual pages", by making the pages the icons of page-sized Button fields, and provide according navigation tools. Showing/hiding fields works in Reader without the need of any additionsl rights. It may, however, be a little bit unusual for the users.
HTH.
Max Wyss.

Hide grand total field on ALV report, But keep the sub total fields

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Hide Unwanted Excise Fields in MIGO & J1IEX

In our business process, the duties such as NCCD and SED are not required and consequently we don't want these fields to appear in MIGO and J1IEX so that users can't put any value by mistake.
Can any one provide some idea what the settings required for this?
Thanks in advance

Hi,
To hide some fields in MIGO, NEED to do configuration settings. Then you can hide the required fields. The pathway as follows...
SPRO->SAP REFERENCE IMG->NATERIAL MANAGEMENT->INVENTORY MANAGENET AND PHYSICAL INVENTORY->SETTINGS FOR GOODS MOVEMENT(MIGO)---> FIELD SELECTION FOR MIGO(CHACK THE RADIO BUTTON FOR HIDE AGAINST THE REQUIRED FIELD).
By following path way you can hide the required fields in MIGO.
For J1IEX also there are options to hide the fields. I hope this will clear your issue. Thanking you.

How to Dynamically Hide-Unhide Report Details

Is there a technique to hide/unhide data?
I am creating a report that summarizes transaction data. The users want the opportunity to review the details behind the summary as the report is being reviewed.
Is there a way to hide the detail data while providing a mechanism for the reviewer to view the detail as desired?
TIA

I have implemented this in BI Publisher enterprise and using the desktop version and I don't get this error..
I did come across another thread that discusses this error. R12: Namespace prefix 'dhtml' used but not declared.
Not sure if that addresses your setup and issue.. You can send me your template to [email protected] if you would like me to take a look.
Thanks!

SharePoint 2013: Hide/Show Column fields while uploading document in Document Library

Dear all,
I have created a document Library LIB001 and I have created One Column of type Choice, drop down list, (CCHOICE) and I have created 3 other columns, (Column1, Column2, Column3).
What I want is while uploading a file in the document library, when I choose a certain value from CCHOICE, i want to show/hide and/or make the column mandatory.
Can anyone help/guide me how to achieve this?
Many Thanks
Vinay

Dear all, I am trying the following code, but it's not entering the onchange of drop down list event. <script> $(document).ready(function () { var countryField = SPUtility.GetSPField('Document Type'); var countryFieldValue = countryField.GetValue(); alert
(countryFieldValue); // ----- Hide/Show the field based on new selected value. var id = SPUtility.GetSPField('Document Type').Dropdown.id; alert ('field ID: '+id); $('#' + id).on('change', function () { alert ('Inside on Change:'+countryFieldValue); if (countryFieldValue
== 'Type1') { SPUtility.GetSPField('Column1').Hide(); } else if (countryFieldValue == 'Type2') { SPUtility.GetSPField('Column2').Hide(); } }); }); </script> Can anyone help me please. Many Thanks & Regards Vinay

How to Hide / Unhide iGrid Applet

I'm attempting to develop an irpt page which will feature two grids / applets. The topmost grid will be visible upon initial load of the page. Upon selecting a record from the top grid, I'd like to then unhide the bottom grid so that a user may select a row from it before then calling another page.
I've tried all of the following methods to hide / unhide the grid but none appear to be working:
1) Set the style.display of the applet to 'none' and then set it to 'inline' after row selection of the top grid.
2) Set the column widths of the bottom iGrid to 0 and then use the document.iGrid-applet.ColumnWidths=x,y JS command after row selection of the top grid.
3) Set the initial width of the iGrid applet to 1 X 1 and then use the document.getElementById("applet-iGrid").style.width / height = 'xxxpx' after row selection of the top grid.
None of these solutions work. It appears that once the iGrid applet is loaded, none of these properties may then be utilized to change it's appearance.
How can hide upon load and then subsequently unhide an iGrid applet??
Thanks in advance,
Randy

Thanks Udayan - this worked.
Only other tidbit was that it appears you first have to set the style display to inline in the div tag (to ensure all subsequent object references to the grid are valid).
Then in the function called by the update event of your top iGrid applet, you have to hide the bottom iGrid/applet with the style="display:none" command.
Then in the function called by the selection event of your top iGrid applet, you have to unhide the bottom iGrid/applet with the style="display:inline" command.
This ensures the applet is first displayed (so that all references to the grid object are valid), hide it when the first (top) grid is displayed, and then unhide it when a row is selected from the first (top) grid.
Thanks again,
Randy

SharePoint 2013: Hide/Unhide column based on another column.

Dear all,
I have a dropdown list "Correspondence Type". What I want is to display/hide some fields when "Correspondence Type" is selected.
In the drop down list I have the following choices: "IN" , "OUT".
What is happening is, when i am selecting "IN", the columns are being hidden/displayed as should be. But when I am selecting "OUT", the approprite columns are not being hidden/displayed.
Please find below the code:
////////////////-----Code Starts here----/////////////
$(document).ready(function(){
// ----- Hide the field at the begin if the default value is other.
// Get a single select dropdown field
var countryField = SPUtility.GetSPField('Correspondence Type');
var countryFieldValue = countryField.GetValue();
// Hide the City field if the selected value is Other
if(countryFieldValue == 'IN') {
SPUtility.GetSPField('Date Sent').Hide();
SPUtility.GetSPField('Date Received').Show();
else if (countryFieldValue == 'OUT'){
SPUtility.GetSPField('Date Sent').Show();
SPUtility.GetSPField('Date Received').Hide();
$("select[title='Correspondence Type']").change(function() {
if ($("select[title='Correspondence Type']").val() == 'IN') {
$('nobr:contains("Date Sent")').closest('tr').hide();
$('nobr:contains("Date Received")').closest('tr').show();
} else if($("select[Correspondence Type']").val() == 'OUT'){
$('nobr:contains("Date Received")').closest('tr').hide();
$('nobr:contains("Date Sent")').closest('tr').show();
////////////////-----Code Ends here----/////////////
Anyone can help me out.
Many Thanks & Regards
Vinay

The issue is in this statement else
if($("select[Correspondence Type']").val() == 'OUT')
It should be
else if($("select[title='Correspondence Type']").val() == 'OUT')
Nadeem Yousuf

Hide/Unhide Button on a Custom Form?

Hello! I am looking for some ideas regarding the ability to hide/unhide a button on a custom form. Ideally, I would like to create an authorization group, if a user is a member of the authorization group, they can see the button, if not, the button is hidden. Is this something that can be done? If not, does anyone have another way of doing this? Thank you.

Are you asking specifically for Smartforms, SAPforms, Interactive Adobe forms? Or generally about UI programming?
Generally yes, this is possible and is also often done to give the user a more friendly interface to work with (without having to click on buttons, only to discover that they cannot use it anyway).
Many standard transactions are developed in this way.
Cheers,
Julius

How to hide dynamic selection fields in variants

hi,
When a selection variant is saved, we have the option to 'hide' a selection field. That field may contain a value, but it is not shown on the selection screen. There is, however, a button that will display these hidden field when required.
Is it possible to do this also with dynamic selection fields ?
The column 'Hide field' is shown in the variant atttributes screen, but it is not active.
Please suggest
MS

Explore SHD0 T code

Hide/Unhide Column in WAD via Button

Hi,
I would like to create a Button in WAD that hides or unhides a certain column (key figure) from a DP in the WebReport. What is the INSTRUCTION to Hide/Unhide a column?
Thanks for your help!

Hi Andreas,
Use Generic Navigation Block to hide or unhide a keyfigure.
Use generic Navigation web item
Assign the report to the data provider
After execution select the navigation block and select the keyfigures and uncheck the check box for the keyfigure to be hidden.
Regards
RaM

ESS portal: Hide additional info field in release working time screen

Hi,
I need to know how can i hide 'additional info' field in the release working time screen?
I know i would use personalization but don't know the way to do that.

it will be shown in header only in release application, let me explain
In the time recording application, when you enter a record and click
on review, the additional info columns shows the text. This works
because the data is entered by the user and the entered record is
mapped to additional info column.
In time release application, all the records from database are retrieved
and displayed. The user does not enter any data. Hence in this case it
is not possible to map the records to text in the additional info
column. The Error/Warning messages are displayed in the top of the list
with detailed information. We feel the information displayed is
sufficient for the user to take necessary action. Usually in the release
application, there would be lots of records. Displaying text in both
additional info column and also at the top of the list is not a feasible
solution.
Technically it would be difficult for us to change this behavior in the
standard application.
we have new application in EHP5.
Edited by: Siddharth Rajora on Mar 9, 2012 7:10 PM

How to Hide the Parameter field at run time....

Hi,
I have a parameter field which behaves differently depending on the User logged in.
It has the LOV coming from following SQL.
SELECT customer_name FROM Cust_mast;
If the user = 'INTERNAL' then the Where clause will be
WHERE cust_id in('DELL', 'SBC', 'BANK')
Else there will be no WHERE clause or the parameter field
should be hidden in the parameter form.
So my questions are:
1) How to hide the Parameter field during Run time?
OR OR OR
2) How to change the LOV select statement during Run time?
Thanks.
Ram.

Hi Ram,
Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
However, what you want can be done in 2 other ways:
1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
<form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
<select name="selected_customer" onChange="First.submit()" >
<option value="">Choose a Customer Name
<rw:foreach id="G_cust_id" src="G_cust_id">
<rw:getValue id="myCustId" src="CUSTOMER_ID"/>
<rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
<option value="<%=myCustId%>"><%=myCustName%>
</rw:foreach>
</select>
</form>
In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
Navneet.

How to hide the Parameter field during Run time?

Hi,
How to hide the Parameter field during Run time?
I have a parameter field which behaves differently depending on the User logged in.
I am using reports 10G
For ex: I have 3 field created in JSP
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user = 'SUPER show all the parameter
CUSTOMER
PROVIDER
FROM DATE
END DATE
If the user is 'GATEKEEPER" Just show
PROVIDER
FROM DATE
END DATE
Can I do that?
Please help
Thanks.
KK

hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

Hide/Unhide a Field

Similar Messages

Maybe you are looking for