Hiding Command Box

Hi,
I have imported the Best practices for EP package. In the package we have webgui transactional iviews. my concern is when i run the iview i can see the command box and from that i can run other transactions. I want to hide the command box so that user can run only that particular transaction.
using webgui (ITS) this can be done by setting the service parameter ~NOHEADEROKCODE = 1. But when we import the business package where do we need to set this service parameter.
Is there a way to do it?
Thanks in advance,
Lakshmi.

finally i had a chance to try it out myself.
for some reason when you specify in the iview application parameter its not working .
i went to sicf, and added this as the parameter in gui link and its working as expected (command box is hidden)
I am trying out, if i come across anything i will post it here.
also when i tested it in browser like below
sap/bc/gui/sap/its/yraja?sap-client=023&~noheaderokcode=1 its working as expected, but for some reason it doesnt work with iview application parameter.
Regards
Raja
Message was edited by: Durairaj Athavan Raja

Similar Messages

  • Hide Command Box through Sap ECC 6.0

    Hi, SAP GURU's
    How is it possible to globally hide command box in a Sap ECC 6.0. or hide it only from Enterprise Portal.
    Regards
    Sumeet Sharma

    Hello Sumeet Sharma
    Hiding the command box in SAPgui for windows is not possible.
    Disabling it would probably mean you have to rewrite the SAPgui interface (not feasible).
    Restricting your users from accessing content they are not supposed to access is based on authorizations, if you give everyone all rights you are bound to heading for trouble and issues restricting where they are going. Also when you get an audit they will surely flag this point as being dangerous.
    You can check with SAP by opening a customer message.
    Kind regards
    Tom

  • Portal: custom i-view definition (transaction) how to hide command box

    Dear Sirs,
    we are trying to define a transaction i-view (displaying a SRM transaction)
    in portal but hiding the command box.
    The i-view has been defined under portal content \..\iview\GUI\
    We have tested some values in "Parameters Forwarded to Transaction" in I-VIEW definition,
    like...
    noheaderOkCode = 1
    WEBGUI_SIMPLE_TOOLBAR  = hide, no etc..
    listed in other threads
    but whitout any effect.
    Is this a possible feature and what are the correct values ?
    From SRM side we have tested the transaction in SE93 in both modes, EWT and normal.

    Sorry but we have any result with these values
    ~NOHEADEROKCODE = 1 or
    ~WEBGUI_SIMPLE_TOOLBAR = 0
    In the "Parameter forwarded to transaction" in the iview definition from portal.
    The command box appears in any case.
    Whe should remove also the "menu" button.

  • For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

    For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
    Please help!
    Many thanks in advance
    Ben Bentley
    West Midlands
    UK

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Hide Command box in transactional iview

    hi,
      I have imported the <b>Best practices for EP</b> package. In the package we have webgui transactional iviews. my concern is when i run the iview i can see the command box and from that i can run other transactions. I want to hide the command box so that user can run only that particular transaction.
    using webgui (ITS) this can be done by setting the service parameter ~NOHEADEROKCODE = 1. But when we import the business package where do we need to set this service parameter.
    Is there a way to do it?
    Thanks in advance,
    Gopi

    Gopi,
    Are you using V2.60.
    You are best to log an OSS message under component
    SV-SMB-AIO-BP-EP.
    James

  • Hide command-box in portal

    I create a ABAP report with ALV grid layout.
    I link the report to a transaction.
    This report will be used in the gui and add to a roll in the portal.
    The transaction iview works well, but the command box is also visible.
    We use      ~webgui_simple_toolbar in the iview as paramater to restrict the command-box.
    This is working.  When the report first appear only the execute button appear.
    The problem is after execute, the ALV grid info appear with the command-box. .
    Although the user cannot use the command-box, i stll want ot prevent this from appearing.
    I try to use PF-status in my program, but can't get rid of the command-box, menu.
    Regards
    Frances

    Hi Shelly,
    I've recently configured ITS transactions to publish on portal setting this parameters on SICF to limit actions, header, possibility to open other transactions:
    SAP Library - SAP ITS in the SAP Web Application Server
    ~TRANSACTION              
    Transaction code to be executed
    <<Your transaction code>>
    ~NOHEADEROKCODE
    Hide transaction launcher
    1
    ~GENERATEDYNPRO
    Enable screen html generator.
    1
    ~WEBGUI_SIMPLE_TOOLBAR
    This simplifies toolbar.
    137
    ~SINGLETRANSACTION
    User only could access to transaction defined by parameter ~TRANSACTION.
    1
    ~WEBGUI
    Enables a set of html properties to get a better UX.
    1
    Hope this helps,
    Kind regards!

  • The tabs have been moved to the top of the screen. I want to move them to the bottom like before. I am having a continuous battle with my drop down webcamera command box dropping over my tabs.

    The Firefox tabs used to be at the bottom of my screen. Now they are at the top and as I open more sites the tabs walk from left to right across the top. There comes a point where the pointer command triggers a drop down web camera box to appear. This box does not disappear quickly nor can I can access to the tabs under the camera command box. No, I can move the camera command box as then it is in the way on either the right or left hand side of the screen impacting other commands.

    For some reason it's the new FF default. Follow this menu chain to toggle it off. <br />
    For Mac:<br />
    View | Toolbars | Tabs on Top. <br />
    For Win:<br />
    Control-Click on any empty area of the Tab Strip to bring up the Customize Toolbar window.<br />
    Click Tabs on Top.<br />
    Now is also a good time to move the Home, Refresh and Stop icons back over to the left. Click Customize ... , grab them, drag them over, click Done.<br />
    Cheers.

  • LM00 - Hide push button and Command box

    Hi all,
    We are in the process of implementing ITS mobile for WM transactions (for example : LM00)
    In the browser, I could see pushbuttons F2, F4 and command box. I dont need these push buttons and the command box. Can I hide them in the browser? In fact I want to hide the whole line.
    Note : The above mentioned push buttons are not the ones coded inside the application.
    Thankyou in advance.
    Regards,
    Vic

    Hello Edgar,
    Thankyou. That helped.
    I have 2 more please
    1. The pop-message (in one of the custom developed RF transaction) that appears on MC9090 through SAP Console doesnt appear when I use ITSMobile with browser on Windows Mobile 5.0 on the same handheld. Any idea, why I will not get this message? Could this be because of missing template for pop-up message box?
    I am trying to use LM00 (+ other tranx) through ITS mobile
    2. I recieve a small screen prompt to enter User ID/Password on the IE 6.0 in the laptop on typing URL. However, in MC9090 handheld device with Windows Mobile 5.0+IE, I do not get this small screen to enter User ID/Password. Therefore a blank screen with no text is displayed. Do I have create template for this small screen too? If so what will be screen number (pgm rlogon?), please. Can you please throw some light on this please?
    Thanks a ton in advance.
    Best regards,
    Vic

  • How to hide transaction codes that i have worked in command box

    Hi ,
    Is there any possible way not to display the transaction codes that i have worked in command box . ex: i have used SPRO ,CRMD_ORDER and other transaction codes to open requred screens.Now i can see last 10 transaction codes  in command box  that i have worked but i dont want to display them .
    Please suggest me the solution not to show them.
    Points will be rewarded.

    hi sap crm,
    the command box is the create button, isn't it?
    if yes, you can remove it by removing authorization for the user that create the order
    hopes it helps
    cheers

  • Disabling Command box in SAP R3 IView

    Hi Portal Guru's,
                    I need to disable the command box in SAP R3 transaction IView. The basic requirement is to disable the user to goto any other transaction once in the R3 system. The user can also type in '/o' to open a new session while using wingui, we want to disable this ability.
    Any suggestions would be appreciated.
    regards
    Nirmal Jct

    this will work if your are using ITS webgui.
    for wingui check the following threa, you need to modify some registry entries.
    Hide the command box in sap gui
    Regards
    Raja

  • How to eliminate Command Box in SAPGUI for Java in Portal?

    Greetings.
    We are planning to use SAPGUI for Java in Portal.
    How do we make sure the user does not go to a different transaction other than the one defined in the iView.
    Thank you.
    PK

    I am sending you a link for forum thread.Hope you find your query answered.
    Re: Hide the command box in sap gui
    Have a best day.

  • Hide the command box in sap gui

    Hi,
    Good to see the SAP GUI form,
    we are bringing SAP R/3 transactions in Enterprise Portal,
    every time the r/3 transaction opens in iview (SAP GUI for windows).
    It shows the normal screen with "Command box" on the top,
    now we dont want the user to browse the sap system using the command box.
    any info on that..is it possible to hide or remove?
    Thanks for help,
    -Krishna

    Hi Krishna,
    note 648452 states that the command box will not be displayed for inplace SAP GUI for Windows sessions if you set the following registry value:
    [HKEY_CURRENT_USER\Software\SAP\SAPGUI Front\SAP Frontend Server\Customize] "HideCmdLineInplace"=dword:00000001
    If you want to disable the command box also for outplace sessions in the portal then you may set in addition to above value the following:
    [HKEY_CURRENT_USER\Software\SAP\SAPGUI Front\SAP Frontend Server\Customize] "HideCmdLineInplaceAllSession"=dword:00000001        
    Best regards,
    Christian

  • Command box  in ESS portal to execute R/3 Tcodes

    Hi All,
    If you worked on similar requirement, can you let me know whether it is possible for making the command box(similar to R/3) to appear in Portal? so that we can execute standard Transaction codes directly from Portal..
    Please let me know if this can be done.
    Thanks,
    cs

    Yes it is possible. It can be done by using IAC iview.
    Steps to display the SAP Transaction as Internet Application Component (IAC) in Portal
    Creating an IAC
    1)Go to transaction sicf. Click on the "watch"button. Under Virtual Host / Services expand Default_host > SAP > bc > gui > sap > ITS. Now right click over ITS and select New Sub-Element.
    2)In the new dialog box give the name of the service.
    3)In the drop box corresponding to GUI Link select the option Yes. Now click the GUI Transaction button and enter the parameters as shown below.
    Parameter Name Value
    ~TRANSACTION <tcode>
    ~THEME 99
    ~generateDynpro 1
    ~noHeaderOkCode 1
    4)Now go to the tab Handler List and maintain the parameter CL_HTTP_EXT_ITS.
    Now click on the save button from the top and save it.
    You can now see the service under ITS.
    5) after saving the service, right click and active it.
    Creating an IAC iview in the portal
    Under Content Administration > Portal Content create an iview of type SAP IAC iview and specify the system alias name and the IAC.
    Note: If you R/3 is not a local system, you have to create a new system under system administraion in portal.
    If you face any issue, let me know.
    Regards,
    Anand G

  • Finished upgrade ios 7.02 at 4s and connecting to itunes, a command box appear says :" itunes could not contact the iphone software update server because you are not connected to the internet." but i still have access to itunes store

    i just finished upgrading ios 7.0.2 at my iphone 4s. and then when i connect it to itunes, a command box appers says :

    FYI, while this command box appear. i still able to browse my itunes store and download some apps and music
    thx.

  • Hp pavilion command box, files being copied

    My hp pavilionsmart keeps poping up the command box. The messages say'sfiles are being copied. Has someone hacked my computer?

    Hello wcreed,
    Welcome to the HP Forums!
    I understand there is a message that files are being copied. To assist you, please provide the exact message and the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Mario
    I worked on behalf of HP.

Maybe you are looking for