Hiding first record from database in input text fields.

Hi,
I have 2 pages, a main page and a popup page. The main page has attributes from a VO in the form of input texts (I just dragged individual attributes) and a link that brings up the popup page. On the popup page I have an ADF Search Form and a Read-Only Table with selection. A user is able to search for records in the database then select the result and submit that row back to the main page which populates the input texts. When you first load the main page, the input texts that are linked to the VO iterator are already populated with the first row in the database. Is there a way to hide these values (but not the entire text fields) until after the user has searched from the popup?
Thanks in advance.

Hi,
thanks much for the replies. Luc, I tried adding that Refreshcondition to the iterator in the pagedef and the result was when I ran the page, the textboxes and record would be gone but the label remained (close but I still need the empty box to show). Also, after running a search in the dialog box and submitting the result back to the main page, the values would still not show up, it just looked the same as when I first run the page.
Did I put the RefreshCondition in the wrong place, or is it something else?
Thanks again.

Similar Messages

Regarding Input text fields

This is about fill in the blanks in flash 8 as2. In this i used input text fields and three buttons.In first frame i used multiple input text fields and a submit button. After filling all the blanks we click on submit button then in the second frame we will show the result like if the blank is correct it should change the color to green and if it is wrong it should change to red.and in the frame i have check button when we click on it will display all the answers. And when we click on analyse button we have to display the answer which the user types and the correct answers.
And my problem is when we click on submit there is no difference in the blanks color all are in black only and i have assigned red to the wrong answer and green to the correct answer.
and script on submit button is
on (release) {
    gotoAndStop("Bl1");
    if ((_root.Bl.txt1 == "abc1") && (_root.Bl.txt2 == "abc2") && (_root.Bl.txt3 == "abc3") && (_root.Bl.txt4 == "abc4")) {
        _root.Bl.txt1.textColor = 0x006600;
        _root.Bl.txt2.textColor = 0x006600;
        _root.Bl.txt3.textColor = 0x006600;
        _root.Bl.txt4.textColor = 0x006600;
    } else {
        _root.Bl.txt1.textColor = 0xFF0000;
        _root.Bl.txt2.textColor = 0xFF0000;
        _root.Bl.txt3.textColor = 0xFF0000;
        _root.Bl.txt4.textColor = 0xFF0000;
where "Bl" is the movie clip name and "txt1","txt2","txt3","txt4" are the var names for input text fields
Please help........

You are concatenating the conditions it will only work if all are true or all are false
on (release)
    gotoAndStop("Bl1");
    if (_root.Bl.txt1 == "abc1")
        _root.Bl.txt1.textColor = 0x006600;
    else
        _root.Bl.txt1.textColor = 0xFF0000;
    if (_root.Bl.txt2 == "abc2")
        _root.Bl.txt2.textColor = 0x006600;
    else
        _root.Bl.txt2.textColor = 0xFF0000;
    if (_root.Bl.txt3 == "abc3")
        _root.Bl.txt3.textColor = 0x006600;
    else
        _root.Bl.txt3.textColor = 0xFF0000;
    if (_root.Bl.txt4 == "abc4")
        _root.Bl.txt4.textColor = 0x006600;
    else
        _root.Bl.txt4.textColor = 0xFF0000;
You can also run a for loop for optimizing the code further.
www.darshanrane.com

Fetch records from Database based on Input value

Hi Experts,
In my mobile application, I have designed one input field with F4 help or input assist. I need to fetch records from database based on that input and need to display records in table.
My question is:
How to fetch the records from database/back end based on the input value and display them as table format as we are doing in SAP ABAP?
Here, I need to fetch the records based on input value available in the UI screen and pass that value to gateway, fetch the records from database and need to bind with table in SAPUI5.
Kindly share the whole process flow with sample code for this requirement. Hope I have explained the requirement in detail.
Thanks In Advance..
Regards,
Arindam Samanta.

Hi,
Try something like this.
In this, I am passing From date, To date, RelGrp, RelStr, Uname as input. Then I am storing those values in variables and passing this data in Odata request.
OData.read({ requestUri: "http://xxxx:8000/sap/opu/odata/sap/Z188_PO_SRV/pos?$filter=Docdate le datetime'"
                + todateformat+"T00:00:00' and Docdate ge datetime'"
                + fromdateformat+"T00:00:00' and RelGrp eq '"
                + relcode +"'and RelStr eq '"
                + relstg +"'and Uname eq '"
                + username+ "' "},
function (data) {
console.log(data);
When we are giving correct inputs it will goes to Success function and get the data from back end.
In console we can see the data.
Hope this will helps to you.
Thanks&Regards
Sridevi

Retrive last inserted record from database table

Hi,
some body inserting a record into table 'A' through some procedure/java program.i want to retrive the last inserted record from database table.records are not stored in order.Can any body help me.

In general, unless you are storing a timestamp as part of the row or you have some sort of auditing in place, Oracle has no idea what the "first" or "last" record in a table is. Nor does it track when a row was inserted.
- If you have the archived logs from the point in time when the row was inserted, you could use LogMiner to find the timestamp
- If the insert happened recently (i.e. within hours), you may be able to use flashback query to get the value
- If you're on 10g or later and the table was built with ROWDEPENDENCIES and the insert happened in the last few days and you can deal with a granularity of a few seconds and you don't need 100% accuracy, you could get the ORA_ROWSCN of the row and convert that to a timestamp.
If this is something you contemplate needing, you need to store the data in the row or set up some sort of auditing.
Justin

Fetch last record from database table

hi,
how to fetch last record from database table.
plz reply earliest.
Regards,
Jyotsna
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 11, 2009 9:44 AM

abhi,
just imagine the table to be BSEG or FAGLFLEXA... then what would be performance of the code ?
any ways,
jyotsna, first check if you have a pattern to follow like if the primary key field have a increasing number range or it would be great if you find a date field which stores the inserted date or some thing..
you can select max or that field or order by descending using select single.
or get all data.. sort in descending order.(again you need some criteria like date).
read the first entry. using read itab index 1

Problem When deleting record from database

Hi ,
I have a question. Firstly I'm using VB
I have a problem about deleting any record from access database , That's the code I'm use it for add new item and it's work but it's not work when I tried to edit any rows " it's not want to Save" but work for add new Item.
Try
Me.Validate()
Me.CustomerBindingSource.EndEdit()
Me.CustomerTableAdapter.Update(Me.KonoDataSet.Customer)
MsgBox("Update Successful")
Catch ex As Exception
MsgBox("Update Failed")
End Try
And That's my code for Deleting any record from database But it's not work and that's a problem.
CustomerBindingSource.RemoveCurrent()
CustomerBindingSource.EndEdit()
Me.CustomerTableAdapter.Update(Me.KonoDataSet.Customer)
Can anybody help me about that issue ?

Hi kono20006000,
Your issue seems really strange. I would recommend you make a troubleshooting.
1.Made sure your code works with the single copy of the database. You could check if it scans hard drive for the database file name and check if it modifies dates on found files. You could check if you operate with the same database.
2. Use the application update the record at the form_load event to see if it would work correctly.
3.Check the table in update statement and the table in add statement.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Get username from session and retrieve records from database wit tat userna

hello..
i got a ChangePassword.jsp which i retrieve the username from session using bean to display on e page..
<jsp:getProperty name="UsernamePassword" property = "username"/>
but in my servlet, i wan to retrieve records from database with tat username..
i tot of coding
String username = (String)request.getSession().getAttribute("UsernamePassword");
and then use tat username to retrieve records.. but is that e right way? The page did not display and i got a CastingException..
Please help.

If you are using the session inside a jsp, you can say "session" without having to declare it.String usernamePassword = (String) session.getAttribute("usernamePassword");However, right after you get this value, check if it is null:
if(usernamePassword==null)
// do sth like forward to error page
else
// continue processing
If it is null, then you are probably not setting it right in the first place. Make sure that in your servlet A you create a session, and before you return or forward to a jsp, that you actually set this value in the session like saying
session.setAttribute("usernamePassword", usernamePassword);
and it is case sensitive for the key.

Populate combobox2 From database WHERE combobox1.text = something

I want to populate combobox2 from database WHERE combobox1.text = something. Here is the code I have and also I am using datable so I want to keep it that way
private void cbCompany_SelectedIndexChanged(object sender, EventArgs e)
this.cmpLocationTableAdapter.FillLocbyCmp(this.shahiemsDataSet.cmpLocation, cbCompany.SelectedText.ToString());
cbLocation.DataSource = shahiemsDataSet.cmpLocation;

The result is a blank combobox2(cbLocation).
Hello,
Did you mean that the combobox2 bound to the datatable cbLocation, but it didn't contain any item, right?
If so, it seems that the method FillLocbyCmp didn't fill any data to that datatable, to troubleshoot this case, we need to check the following tips.
1. Whether the database for that dataAdapter contains any data, and whether you connected to the right database.
2. Whether that database could get any result filtering by that text value.
3. Whether that method could get that datatable filt succeccfully.
Since we could not get code about that FillLocbyCmp method, if possible, you could share them with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

X-Fi Elite Pro - Recording from the Phono Input Prob

Kit:?
Vista x64
4GB Ram
Q6600
X38 Mobo
X-Fi Elite Pro
Audio is taken via?Digital Output (not the optical one) from the External box to a Sony Cinema Amp.
Have installed using the Vista X-Fi CD and updated to the July 2008 drivers.
Problem:
Unable to record from the Phono input on the external breakout box, in fact only the Line-In on the actual card seems to work, but when recording via the Creative Entertainment Console the recording has what sounds like reverb applied to it. Recording via Vista's Sound Recorder produces a clean sound but is in WMA and very low quality.
Other Obvious Problems:
Have to manually select the Input port via Vista's Sounds Panel, by setting the required input as 'default device'.
Headphone socket on the external box doesn't anything coming out of it.
Question:?
Has anyone sucessfully recorded via the Phono input on an Elite Pro under Vista x64, and if so how
Thanks.
Message Edited by 0idsjagf on 08-07-2008 2:56 PM

Huhu, right-click onto the window where all devices like microphone or speaker output are listet (record, playback) (Controlpanel " sound") Then you have the option to enable "show deactivated devices" maybe then the phono input is available to your needs.

Read from database (Access) and update fields using MS ADODB

Hello,
I am trying to get records from database using MS ADODB._connection & ADODB._Recordset objects (from LabVIEW 6)
I can:
1. open connection (with ADODB._connection)
2. write into tables (with ADODB._command)
I can not: gets records and update fields using ADODB._connection & ADODB._Recordset.
I do not know:
1. how to connect between the connection that was opened and the recordset object
2. where I can write the SQL text as input to the recordset
Attached is DataBase.llb with DB_read.vi that display my steps.
Thanks.
Attachments:
DataBase.llb ‏40 KB

Try this one, after updating the names for database and the table you want.
Let me know if it's working.
p.s.: if you have problems, it could be a different adodb version ... but the sequence of methods is the same
Attachments:
EditdatabaseMe.vi ‏57 KB

Emailing data found in input text fields

Hi,
I have a simple form that users fill in various "input" text
fields like "Name", "Email", etc... now all I want is when the
click on the "send" button, it should automatically send an e-mail
to "info@...".
I got it to enter the proper recipient email address and
subject but there's not content. What am I missing?
Thanks,
Phalconheart

Thanks for the prompt reply.
Just to clarify (programming is not my primary function...
far from it)
Yes, just opening the clients e-mail program and populating
it with all the variable info he's selected is fine.
so, in your code:
url ="mailto:[email protected]?subject=Message
Subject&body=First line of message.%0ASecond line." + "%0A" +
"Third line.";
1) what does the "%0A" do exactly?
2) do I simply replace where you wrote "First Line of
message" with the code "variables.item = itemChoice.text;"? and so
on and so forth?
Thanks,
Pat

How to allow input text field to accept more than one "specific" answer.

Hi,
I am working for something and trying to create a type-box-based quiz for one of my classes, where an input text field can change it's border color if 2 or more words from an accepted word list is inputed.
For example, Say a list has possible answers: R,G, B, Y for the question "Name 2 colors".
I want to create an input text box where the border of the box will change color if any 2 letters (in the above list) are entered into it.
I've tried setting up a variable NumberSuccesses and setting it so that the number increases by 1 for each letter entered e.g.
if (Ex.text == "R");
NumSuc = NumSuc +1; // the var NumSuc has already been defined earlier in the code
If (Ex.text ''G")
NumSuc = NumSuc + 1
if (NumSuc == 2)
Ex.borderColor = 0x0000FF
but that didn't work.. and I tried doing it with another function which I use for multiple input boxes like if there were boxes A, B, C. I could set up a general function where if the correct answers were entered into A, B, an C respectively, only then will say, a checkmark show up using a
EnableCheckmark (); type function. Not sure how to do it if it's the same text input box though. Also just tried adding it into the same function re.
If (Ex.text == "R" + "G")
Ex.borderColor = 0x0000FF
.. Does anyone know what else I can do?

The solution of Nishu with Evaluation Logic:
//These Are the Possible Answers
var solutions:Array = new Array("A","B","C","D");
function testInput(_inputText:String):Boolean
    //the delimiter could also be a comma, here it is a space
    var inputStringArray:Array = _inputText.split(" ");
    var counter:Number = 0;
    for (var i:int=0; i<inputStringArray.length; i++)
        for (var j:int=0; j<solutions.length; j++)
            if (inputStringArray[i]== solutions[j])
                counter++;
    if (counter >=2)
        trace("true");
        return true;
    else
        trace("false");
        return false;
//Textfield with name input_txt on stage
input_txt.addEventListener(TextEvent.TEXT_INPUT, answerTxtInp);
// The function that will be called by the event listener
function answerTxtInp(txtEvent:TextEvent):void
     // depending on the possible answers of characters, change the border color
     if(testInput(input_txt.text)){
         input_txt.borderColor = 0xFF0000;
     else{
         input_txt.borderColor = 0x000000;

Instance name and Var for Input Text fields

I have several Input Text fields, as a form, linked to a PHP
script for which I require Var's for each field.
But I also need Instance names for each field, so I can fix
the tabIndex.
Yet, everytime I test my movie, the text fields have their
Paths (_level0.fName) written in them.
They are normally blank, and I've tried putting in some text
of my own, but the Var name is still displayed in the text fields.
Is there any way I can stop that from happening, and keep
both the Instance names and Var's in-place.
As far as I know, I need both the Instance name (for the
tabIndex) and the Var (for the PHP script) or is there a way that
the tabIndex and PHP script will work with either of the two?
Thanks
Chaz.

Can you use a different name for ‘instance name’
and ‘var’? That seems to solve the problem but I
don’t know if that helps you in your situation.
For an example;
Instance name: test_txt
Var: test

Input text field nested in movie clip?

Hello,
Is it possible to have an input text field inside a movie
clip in Flash Lite 2? I've tried targeting it all different ways
and it doesn't seem to work, so I just thought I'd check with
someone who knows.
Thanks for your help in advance!

Hi Nirnalatha,
I have newly joined this forum and while going through the
posts I came across your post which I thought I could help out. But
I think I am too late for the reply.
I am also into Flashlite development couple of months from
now. Coming to your questions:
1. Textbox problem: I am surprised to know that E70 mobiles
(Device central list has E70-1 only) does not show input text box
when cursor is in input box. Anyways its a good thing that you dont
get an additonal input box. Like all J2ME applications you will be
able to type the text inline. Infact we had reverse problem where I
was told to create inline edit input box instead of flashlite input
box. I think this is the mobile setting. Check the device features
in the Adobe Device Central under Flash - Standalone player - Text
and Fonts features. It will be mentioned whether inline text is
allowed or not.
2. Soft keys issues: You need to use
fscommand2("SetSoftKeys", "Previous", "Next");
and use a key listener in order to override the Mobile
Softkey commands. Check out the flashlite help which clearly
explains this.
Hope I have given youa way to solve ur problem.

Disable Backspace when in input text fields

Im trying to find a way to disable the keyboard backspace
button from going back a page in the site but allowing it to
function as a character delete when needed for typing in an input
text field of a form.
Strangely this problem only occurs for about a minute after
the page is opened....after that it then works correctly. You can
see what I mean by accessing the site's contact page
www.safetybusiness.co.uk
I have found two different sets of code to disable the
Backspace completely, but this then means it doesn't work at all
when wanting to delete in the text field.
Method 1:
<script type="text/javascript">
if (typeof window.event != 'undefined')
document.onkeydown = function()
if (event.srcElement.tagName.toUpperCase() != 'INPUT')
return (event.keyCode != 8);
else
document.onkeypress = function(e)
if (e.target.nodeName.toUpperCase() != 'INPUT')
return (e.keyCode != 8);
</script>
Method 2:
<script>
function checkShortcut()
if(event.keyCode==8 || event.keyCode==13)
return false;
</script>
<body onkeydown="return checkShortcut()">
Anyone know how I can overcome this?

The TextField class has a tab order property. You may want to
look into this. As for disabling the backspace key, you can grab
key presses from user input. I'm not 100% on this but you could use
Flash to test the key being pressed. If backspace is pressed, find
out the current object with focus (unsure of this part), if it's an
input box in flash, have flash handle it or if a text box doesn't
have focus, send it out to javascript to have it handle it.

Hiding first record from database in input text fields.

Similar Messages

Maybe you are looking for