Hiding of Screen Elements

I have some screen elements which I hide.
On hiding, however, the area appears as blank; i.e. there is an unwanted space between screen elements.
Is there a way to eliminate the extra visible space?
Regards,
Abhinava

AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF p_sab = 'X'.
 IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
 screen-active = '0'.
 screen-invisible = '1'.
 ELSE.
 screen-active = '1'.
 screen-invisible = '0'.
 ENDIF.
 MODIFY SCREEN.
Endif.
USe active and invisible.
regards
vinod

Similar Messages

Problem in Hiding the Screen Elements in CRMD_ORDER

Dear Experts,
I am working in SAP CRM 5.0 Implementation project.
My client Do not want all the elements in the Transaction code 'CRMD_ORDER'.I would like to hide Some fields.Is there any BAdI to Hide the
Transaction Data Tab and also I want to hide some fields in Item Details Tab.
Please help me is there any BAdI or any other way to achieve my Requirement.It is very Urgent.Please Help me.
Thanks & Regards,
Ashok.

Hi,
You can follow any one of the following approaches:
1. Use the screen variant transaction SHD0 to create the transaction variant and assign your own screen variants. The screen variants can be used to hide the fields/tabs as per your requirements. Assign the transaction variant to the specific transaction types. You can maintain different transaction variants for different transaction types.
2. Use the BAdI CRM_ORDER_FIELDCHECK to modify the field status from modifiable to display only. However, this can not be used to hide any particular field/ tab.
Regards,
Kaushik

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Capturing the values of screen elements on click of execute button

Hello folks,
Is there a way to capture the values entered in the screen on click of the execute button?
What I want to do is, I have a selection screen where-in a user can fill the input fields (parameters and select-options). Now when the user clicks on the execute button, the values of all the screen elements (no matter if they are filled or empty) should be stored in variable, so that I can use these values again when I am calling this program from another program.
I want to do something similar to saving a variant, but this save should happen on click of Execute button and user need not require to explicitly save these values as variant.
Hope I am clear enough to put my query in front of you all.
It would be a great thing if you could help me.
Need your help.
Thanks in advance.

Hi,
You need something like this
REPORT A.
TABLES: sflight.
PARAMETERS: pa_scarr   TYPE sflight-carrid.
SELECT-OPTIONS so_conn FOR sflight-connid.
DATA: BEGIN OF it_selscr_values OCCURS 0.
        INCLUDE STRUCTURE rsparams.
DATA END OF it_selscr_values.
START-OF-SELECTION.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      curr_report     = sy-repid
    TABLES
      selection_table = it_selscr_values. "here you have all parameters' values from selection screen
"later in some other program you can use this table to call report A filling its selection screen with these default values like
SUBMIT a WITH SELECTION-TABLE it_selscr_values.
Regards
Marcin

Search help on screen elements

Hi I have a screen where I need to include a seach help on the screen element. The element itself is just a generic char 8 field with no dictionary reference. I have tried using the VRM_SET_ VALUES in the PBO but as soon as I press enter it looses the value selected. So I have now tried the using the process on value_request but despite finding and populating 138 values in the search help pop up, the actual pop up screen shows a blank list, with the text at the bottom saying 138 values.
Any ideas what I am doing wrong?
Set list values
 call function 'VRM_SET_VALUES'
 exporting
 id = lv_vrm_id
 values = it_values
 exceptions
 id_illegal_name = 1
 others = 2.
 if sy-subrc <> 0.
 MESSAGE I000 WITH 'Failed to populate username list values'.
 endif.
process on value-request.
field my_field module fill_my_field.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 retfield = 'MY_FIELD
 dynprofield = 'MY_FIELD'
 value_org = ' '
 dynpprog = progname
 dynpnr = dynnum
 tables
 value_tab = it_values "it contains 2 fields that will be shown in the list box
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.

I'm still having problems with this. Here is my VRM set values - the problem I have with this is as soon as i choose a value from the list and press enter, the value dissappears from the screen element:
data: lv_vrm_id(80) type c.
 data: lv_key(3) type n value 1,
 lv_index type sy-tabix.
 data: it_values type standard table of vrm_value,
 s_values type vrm_value.
 lv_vrm_id = i_type.
 lv_key = 1.
 clear it_values.
 loop at it_cabn into s_cabn
 where ATNAM = i_type.
 read table it_cawn into s_cawn with key atinn = s_cabn-atinn
 binary search.
 while s_cawn-atinn = s_cabn-atinn.
 lv_index = sy-tabix.
 s_values-key = 1.
 s_values-text = s_cawn-ATWRT.
 condense s_values-text.
 append s_values to it_values.
 add 1 to lv_key.
 lv_index = lv_index + 1.
 read table it_cawn into s_cawn index lv_index.
 if sy-subrc <> 0.
 exit.
 endif.
 endwhile.
 endloop.
* Set list values
 call function 'VRM_SET_VALUES'
 exporting
 id = lv_vrm_id
 values = it_values
 exceptions
 id_illegal_name = 1
 others = 2.
 if sy-subrc <> 0.
* MESSAGE I000 WITH 'Failed to populate username list values'.
 endif.
And here is my code for the F4 lookup - the problem here is that the search help pop dispklays nothing depsite saying it has 138 values. I am wondering if its my it_values that is the wrong format, or is it the fact that my field type doesn't point to a dictionary element?
TYPES: BEGIN OF ty_values,
 type(8),
 descr(20),
 END OF ty_values.
DATA: it_values TYPE STANDARD TABLE OF ty_values,
 s_values type ty_values.
data: lv_key(3) type n value 1,
 lv_index type sy-tabix.
* Build lookup values for wood type test
clear it_values.
loop at it_cabn into s_cabn
 where atnam = i_type.
 read table it_cawn into s_cawn with key atinn = s_cabn-atinn
 binary search.
 while s_cawn-atinn = s_cabn-atinn.
 lv_index = sy-tabix.
* s_values-key = 1.
* s_values-value1 = s_cawn-atwrt.
 s_values-type = s_cawn-atwrt.
 append s_values to it_values.
 lv_index = lv_index + 1.
 read table it_cawn into s_cawn index lv_index.
 if sy-subrc <> 0.
 exit.
 endif.
 add 1 to lv_key.
 endwhile.
endloop.
DATA: progname TYPE sy-repid,
 dynnum TYPE sy-dynnr,
 dynpro_values TYPE TABLE OF dynpread,
 field_value LIKE LINE OF dynpro_values.
progname = sy-repid.
dynnum = sy-dynnr.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 retfield = 'ATWRT'
 dynprofield = 'TYPE'
 value_org = ' '
 dynpprog = progname
 dynpnr = dynnum
 tables
 value_tab = it_values "it contains 2 fields that will be shown in the list box
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
if sy-subrc <> 0.
endif.

ABAP Dictionary type FLTP is not allowed for screen element

Hi Experts
I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
"ABAP Dictionary type FLTP is not allowed for screen element"

Hi,
This is from help
ABAP Dictionary type FLTP is not allowed for screen element
Message no. 37048
Diagnosis
The format of the ABAP Dictionary field is only for use within the ABAP
program and cannot be used in the Screen Painter.
Procedure
The field cannot be used in screens. If you want to output the
information in the field or assign a value to the field from the screen,
you must use an intermediate field with an appropriate format.
Reward points
Regards

Copying screen elements from one screen to another in 4.5b

Hi ABAP Gurus
Please help me out from the following situation.
I am in a situatin where i need to copy the screen elements(Block, I/O fields, Push buttons) from one
screen to another and do the modifications in the copied screen. Here iam using 4.5b version and i am unable to find out to copy the screen. I am trying with the following way and is not working for me.
selecting the block -
>EDIT---->CLIPBOARD---->Copy to Temp Storage
EDIT---->CLIPBOARD---->display temp stor.
but itz not working.
Please let me know the process. Please dont forgrt that i am working on 4.5b version.
will reward with points for the helpfull ones.
Thanx in advance.

don't go from that way
go to source screen select contents with ctrl key and mous e
procedure : click on one object press ctrl after that click on all object along with ctrl key.
copy or ctrl +c
open target screen paste.
when u paste a structure comes with your pointers just click on screen
regards
aniruddh singh

How to upload multiple files in Webdynpro using File upload Screen Element

Hi Experts,
Can anybody tell me how to upload multiple files/pdfs in webdynpro using file upload screen element, and also please tell me what is the maximum storage limit of RAWSTRING data type,Advance Thanks.
Regards,
Sandesh

Hi Sandesh,
this is simply not supported, not in WebDynpro nor in standard HTML.
A workaround is to upload a ZIP with all files and on server side unpack the ZIP and operate on the single files.
I hope it will help u..
----------------------OR-------------------------
As you know using File upload UI element we can upload only one file at a time. There may be a scenario where user may want to upload any no of files at a time which is not determined at design time. This can be acheived using the ACF UpDownload UI element which requires a security whiltelist to be created
http://scn.sap.com/docs/DOC-2270
----------------------OR-------------------------
You can use Table UI element.
Regards,
Deepak Singh

How to create a parameter id on screen element

How to create a parameter id on screen element
reply urgent

Hi Madan,
Check this info.
Parametere Id is the one which holds the memory for the particular field. when we need to pass the the field from one screen to another use the parameter Id.
The SAP Memory is a user-specific memory area of the application server, which is accessed by all main sessions of a user session at once. ABAP programs have access to SPA/GPA parameters stored in the SAP Memory (also called SET/GET parameters).
Eg. Of how to use Set parameter
you can give value of variable (dobj) to parameter ID 'pid'. This will store value in SAP memory
SET PARAMETER ID pid FIELD dobj.
When you want to use that value stored in SAP memory
you can use GET parameter.
GET PARAMETER ID pid FIELD dobj.
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
Check this link.
http://help.sap.com/saphelp_47x200/helpdata/en/f5/6a853c61c5140ee10000000a11405a/frameset.htm
Hope this resolves your query.
Reward all the helpful answers.
Regards

Issue with selection screen element on At slection scree

Hi All,
I am facing an issue with a checkbox which is present within the subscreen of a standard selection screen.
The issue is that the value of the combobox get toggled by itselfon the event mentioned below. I am unable to find out how this combo box value gets changed by itself on the screen events.I tried clear statemetns etc nothing is helping. I debugged with a watch point on this screen element and found this to happen.It just changes the value of the element to a previously held state.I m trying to clear the combobox but this event puts back the tick mark.How can I stop this.
AT SELECTION-SCREEN ON COL_FROM. "COL_FROM is another screen element diffrent from the combobox
Thanks

Hi Vighneswaran CE,
This event corresponds to the PAI module of the COL_FROM field. So, it gets executed each time you press any valid function code on the screen (unless there was an error in a previous field). Nothing abnormal here.
That's difficult to help you on that topic, you'd better tell us exactly what report it is, where you have added your code (and what code) to change the checkbox, ...
Best regards,
Sandra

Space left in the printout after hiding the text element in smartform

Hi
In my smartform there is space left in the printout after hiding the text element with condition.
Is there any way by which we can remove the space in the smartform,
Thanks
Ank

Hi ,
I am displaying the text in table with two columns and in one column i am giving the text elemnt and in other the value.
I had given the condition that if the data is not present then the text elemnt should not be shown in the form .My form is working perfectly except that its leaving the space for that text element.
thanks
Ank

How to change the screen element to be ineditable in Dynpro POV

Hi Experts, any one has experience on how to change the screen element to be ineditable in Dynpro POV?

Write this piece of code in the PROCESS ON VALUE-REQUEST..
PROCESS ON VALUE-REQUEST.
FIELD MARA-MATNR MODULE matnr_mod.
MODULE matnr_mod input.
LOOP at Screen.
if screen-name=<field_name>.
screen-input = 0.
modify screen.
endif.
ENDLOOP.
ENDMODULE.
Thanks
Venkat.O

How to get selection screen elements and its table reference of a report ?

halo experts
How can I get selection screen elements and its table reference of a report ? . I tried rs_refresh_from_select_options. But I am unable to get the table and field it is referring to
For eg if my selection screen 1000 is
parameters: p_carrid type spfli-carrid,
select-options :s-_connid type sflight-connid.
is there any Fm or method which gives me what are the screen elements( p_carrid and s_connid ) and what table( splfi and sflight ) and field ( carrid and conid )it is referring to ?

The following code is an example of how you might dynamically determine all your PARAMETERS and SELECT-OPTIONS variables at run time. The PARAMETERS and SELECT-OPTIONS only point to a dictionary element--not a specific table. Even though you may say "spfli-carrid" or "sflight-connid", the data type really references the dictionary type and not a specific table/structure.
REPORT ZTEST_PROG.
TABLES sflight.
DATA:
 screen_tab TYPE STANDARD TABLE OF screen,
 wa_screen TYPE screen,
 scrn_nm TYPE string,
 scrn_leftover TYPE string,
 l_type TYPE REF TO cl_abap_typedescr,
 typ_nm TYPE string,
 typ_pre TYPE string.
FIELD-SYMBOLS <fs_data> TYPE ANY.
PARAMETERS p_carrid TYPE spfli-carrid.
SELECT-OPTIONS s_connid FOR sflight-connid.
INITIALIZATION.
LOOP AT SCREEN.
 IF screen-group3 = 'PAR'
 OR screen-group3 = 'LOW'.
 APPEND screen TO screen_tab.
 ENDIF.
ENDLOOP.
START-OF-SELECTION.
LOOP AT screen_tab INTO wa_screen.
 ASSIGN (wa_screen-name) TO <fs_data>.
 l_type = cl_abap_typedescr=>describe_by_data( <fs_data> ).
 IF wa_screen-group3 = 'LOW'.
 SPLIT wa_screen-name AT '-' INTO scrn_nm scrn_leftover.
 TRANSLATE scrn_nm TO UPPER CASE.
 ELSE.
 scrn_nm = wa_screen-name.
 ENDIF.
 SPLIT l_type->absolute_name AT '=' INTO typ_pre typ_nm.
 WRITE:
 / 'Screen Name: ', scrn_nm,
 / 'DDIC Type: ', typ_nm.
ENDLOOP.
When you get into defining internal tables you can determine those at run time with cl_abap_structdescr. The following is an example of how you might do that. You can loop through the "components_table" and evaluate each field of the structure in this way.
DATA: structure_reference TYPE REF TO cl_abap_structdescr,
 components_table TYPE abap_compdescr_tab,
 components_structure LIKE LINE OF components_table.
structure_reference ?= cl_abap_structdescr=>describe_by_data( any_structure ).
components_table = structure_reference->components.
I don't know if this answers any of your questions but I hope that some of it is useful.

Hiding of Screen Elements

Similar Messages

Maybe you are looking for