Hiding scrollbar at runtime

Hi!
Has anyone had any success hiding a block scrollbar at runtime.
There is no block property that does this.
I`ve tried to move the scrollbar out of the window, got an error message stating that I could not move the scrollbar out of sight.
I've also tried to put an text item and a push button directly on top of the scrollbar, but the scrollbar is still shown and the text item and push button appears behind it.
Pls advise
regards
Morten

I have not tested this but you can specify the canvas for the scroll bar, so presumably you could put it on a stacked canvas and hide or show it programatically.

Similar Messages

How to load scrollbar at runtime

Hi in my project I have 2 datablock.Based on the condition the datablock gets loaded.Is it possible to add the scrollbar of the datablock at runtime.

Hi I have 2 block which is linked 2 canvas.In the content canvas condition is applied based on which the block along with canvas is displayed and the data is fetched from the view.How is it possible to hide the canvas along with scrollbar.Normally even after going to specific block by GO_BLOCK command the scroll is still displaye din the main canvas.Is there is method by which only 1 scrollbar is dispalyed on the content canvas as i block is selected

I give up where are they hiding the LabView runtime engine downloads?

When I deploy en EXE I find it much easier to just plug the target machine into the network and download VISA and the Runtime Engine.
VISA is easy to find but I always end up spending 45 minutes to an hour looking around for the LV runtime download.
It's been 45 minutes now and the closest I have come is finding the Web Browser runtime plugin.

2012 32bit
2012 64bit
2012 SP1 32bit
2012 SP1 64bit
2011 32bit
2011 64bit
2011 SP1 32bit
2011 SP1 64bit
2010 32bit
2010 64bit
2010 SP1 32bit
2010 SP1 64bit
2009 32bit
2009 64bit
2009 SP1 32bit
2009 SP1 64bit

How to hide and unhide scrollbar at runtime

I have a multiline item and i attached a scrollbar to this item. However, I only want the scrollbar to appear when my input text is more than the multiline text. Suppose my multiline can allow 5 lines, If i want to go to the sixth line that is when i want the scollbar to appear

Ade
You cannot set the items multi_line property. Instead you can check if multi_line has been set to true or not.
DECALRE
V VARCHAR2(10);
BEGIN
V := GET_ITEM_PROPERTY('ITEM_NAME',MULTI_LINE);
END;
MULTI_LINE will return TRUE /FALSE ( a varchar2 type).
For more details, check the documents on SET item_property on what all properties that can be set .
Cheers... Bob

Hiding controls during runtime only

Here's my problem that I am sure has an easy fix. I have seen a solution some time ago for it (I believe), but I can't remember where and my search of the knowledge base and forum have led no where.
I need to make invisible, a control during run-time (with an executable). However if the program is running in the developement environment, the control is visible. I don't remember if there is a specific vi for detecting which mode LV is in or not. As you may have guessed, this control is for debugging purposes only. The property node will control the visibility regardless of which mode I am running in, so this is not an option.
Is there a way to detect if LabView is in develope mode or not?
Thanks for your assistance.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home
Solved!
Go to Solution.

Yes. The Application Kind property.
Here is an example that deterimines whether to close LabVIEW or not. If in the run-time system, LabVIEW will close. If in development, you don't want your whole development environment to shut down when you stop the VI.
You'd need the same code, but just put your hiding of your controls in here instead.
Attachments:
Main_BD.png ‏3 KB

Scrollbar In Oracle 6i Forms

Hai all,
I want to hide the scrollbar of a detailed block depending up on the data in the master block.
but i can;t find any thing in the SET_BLOCK_PROPERTY.
or is it possible to hide entire block including the scrollbar?
thanks in advance.
Manu

I want to hide the scrollbar of a detailed block depending up on the data in the master block
1.You cant create scrollbar at runtime (forms 6i)
2. If scrollbar property yes(static) then we can play with hight and width and placement of scollbar.
is it possible to hide entire block including the scrollbar?
but if u want to hide the block that is possible
if u place the detail block at different canvas (as stacked).
If is helpful/correct please tick
kanish

Scroll bar is missing

Hello,
My horizontal scroll bar is missing and disabled. Ive tried using overflow-x:scroll, overflow-x: auto, all of it. The scroll bar appears but is disabled. It works in Chrome and IE
What's up. Why would you disable the scroll bars? This makes NO sense.

I see very similar results in IE8 and Fx14. Both have a scroll bar at a certain width and then as I expand the window (this is a 1440px display) the scroll bar vanishes. The width where this happens is slightly different, but not by much.
Please note that pop-up windows may display differently than regular windows. The script code for the pop-up can remove certain controls from the new window such as scrollbars. If you think this might be what's happening, you can force scrollbars in popups using a hidden preference.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''window_open''' and pause while the list is filtered
(3) Double-click the '''dom.disable_window_open_feature.scrollbars''' to switch its value from the default of false (don't disable sites from hiding scrollbars) to true (prevent sites from hiding scrollbars).

UIScrollBar component dynamic text capital letter Y not appearing

I'm using the UIScrollBar component, dynamic text is my setting. When I view the swf or exe, all my text appears except for capital letter Y, it appears in flash, but not the swf or exe file.
Any reason why this happens?
Any help is appreciated.

I finally found the answer but this scenario doesn't make
sense. It seems you have to create a dynamic text field with a
scrollbar during runtime through actionscript, rather then creating
the text field and scrollbar in design mode. Here is the code that
worked:
import fl.controls.UIScrollBar;
var myTxt:TextField = new TextField();
myTxt.background = true;
myTxt.backgroundColor = 0xFFFFFF;
myTxt.border = true;
myTxt.wordWrap = true;
myTxt.width = 200;
myTxt.height = 200;
myTxt.x = 22;
myTxt.y = 75;
var mySb:UIScrollBar = new UIScrollBar();
mySb.direction = "vertical";
// Size it to match the text field.
mySb.setSize(myTxt.width, myTxt.height);
// Move it immediately right the text field.
mySb.move(myTxt.x + myTxt.width, myTxt.y);
// put them on the Stage
addChild(myTxt);
addChild(mySb);
// load text
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest("breakroomText.txt");
loader.load(request);
loader.addEventListener(Event.COMPLETE, loadcomplete);
function loadcomplete(event:Event) {
// move loaded text to text field
myTxt.htmlText = loader.data;
// Set myTxt as target for scroll bar.
mySb.scrollTarget = myTxt;

Hiding Tabs in PCUI application on Runtime

Hi.
I'm looking forward to hide a tab in a PCUI application during Runtime but i'm getting the following bahiviour:
Let's assume i have 20 tabs and i don't want the TAB 15 to be displayed. I've used the method CHECK_ACTIVE_TABSTRIP in TAB 1 in order to delete from the list TAB 15 and "great" -
> that works ! :-D but..... as soon as i switch to TAB 2, TAB 15 is displayed again !!!!! does it mean that i have to redefine such method in all the MAC's and place my code for hiding the tab ?????? isn't there a BADI or kind of ? that doesn't make sence to me.
Thanks.
Armando Rodriguez.

This is how it works in PC-UI...
You can implement the logic in one method and call this in all MAC's...
Enjoy....
Raj

Hiding tabs runtime

Hello,
I have a project set up where books are shown as tabs in the header (assuming hidden is set to false). Now I'm implementing a scenario that should force the user to do certain things, and as such a set of tabs (all except the one that is currently active) should be hidden if a set of conditions are true.
In short: I want to set the hidden field of books to true/false in runtime.
So far, I thought I would solve it by using a Session Property Set and Visitor Entitlements:
- Created a Session Property Set in the datasync project with a boolean property named forceUpdate
- Added line to JSP code that would set that property via a form bean variable:
*<profile:setProperty propertySet="SessionPropertySet" propertyName="forceUpdate" value="${pageFlow.formBean.forceUpdate}"/>*
- Created a visitor role called force_update in the Portal Administration Console with a role expression condition referring to the forceUpdate property
- Added the force_update role to book in question
However, this is not working. I suspect it might be that the line in my JSP code is flawed. Also, this is rather cumbersome - is there any easier way of accomplishing this? I also tried using BookPresentationContext without any luck (return null).
Thanks,
Ola

I solved this using BookBackingContext - something like this:
BookBackingContext parent = BookBackingContext.getBookBackingContext(ScopedServletUtils.getOuterRequest(request)).getParentBookBackingContext();
BookBackingContext book = parent.getBookBackingContextRecursive("book_label");
book.setHidden(true);
It worked. The key here was using the outer request instead of the default (scoped) one as well as retrieving the parent BookBackingContext before looking up the books that I wanted to hide.
I ended up having to do this both in my page flow as well as in my backing file's preRender() method. I had to do this for two reasons:
- The conditions for hiding books are found in my page flow's begin() method, which is executed after my backing file's preRender() method
- Only doing this in my begin() method was not sufficient as I cannot be sure it is called when the book/page is loaded (e.g. refresh), in which case the books are all visible again
Can I get away with calling my hide/show-method() in only one place here, either in my page flow or in my backing file?
Cheers,
Ola

Enable Auto Hiding of Folio Scrollbars

Hi there,
I’ve just read on several websites that there’s a way to hide the scrollbars that by default cover 6 pixels of the folio on the right site of the screen, but I couldn’t find where and how to select this option. Apparently it is called “Enable Auto Hiding of Folio Scrollbars”.
I’m a bit confused that I read so often that it is possible but never how you can do it. Did I get something wrong?
(I work with DPS/InDesign CC on a 2009 iMac running the latest version of OS X Mountain Lion and want to make an iPad app.)

You select that option in DPS App Builder when you create the app. It's in the Advanced Options section on the App Details page.
http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

Runtime FIELD DELETION / HIDING of Internal Table

Dear All,
Can Anybody would like to say " How can i delete a field of internal table before passing it the FIELD_CATALOGE_MERGE Function In ALV Report"
Or i wil be also thank ful to you if you would tell me " How can i hide the field of internal table at runtime In ALV Report"
Warm Regards,
Nirav Parekh

HI,
We do not have an option to delete a field from an internal table at runtime, we have an option to delete the data from it .
To hide a Field in ALV :
set <b>wa_fieldcatalog-no_out = 'X'.</b>
loop at t_fieldcatalog into wa_fieldcatalog.
if wa_fieldcatalog-fieldname = 'BOX'.
wa_fieldcatalog-no_out = 'X'.
modify t_fieldcatalog from wa_fieldcatalog.
ENDIF.
ENDLOOP.
Regards
Sudheer

Hiding movieclip that's attached at runtime

Hi, I have a website I am working on and I found a tutorial
to attach the weather to the homepage. It exports a movieclip
called weatherDay. Its script is in a separate .as file and then on
the webste timeline this code makes it visible
// include the script to grab the XML data and import it into
the flash movie
#include "scripts/content.as"
// fire event to display current weather conditions
dispatchEvent({type:"containerInit",
target:this.temperature});
How would I go about hiding the exported movieclip in areas
of the site I don't want it visible? Currentlyy it shows up on the
same spot on every page, and when I try to change the visibilty or
even the _alpha, nothing happens.

Thanks Keith - turns out you can set the bitmap mode to false to access buttons in the blitmask, which is working, so I'll run with that. Cheers mate.

Hiding the runtime engine

I have seen postings about this issue before but still...
I'm trying to hide the LabView Runtime Engine (RTE). Basically I would like to have the whole app in one directory.
When I put the lvrt.dll and additional files in the same dir (as suggested in this forum), starting the EXE calls the Windows installer and the RTE is extracted to the usual path (c:\program Files\National Instruments\shared...).
When I abort the Installer it pops up again 3 times. After aborting 3 times the app launches and runs correctly without having installed the RTE on the system.
Is there an option to prevent the RTE installer to kick in?
(Currently running LV 7.0)
If someone can help I'll buy you a beer at your next trip to Germany!
-DB

Just having lvrt.dll and the resource files (rsc) isn't enough: copy the following files & folders into the folder containing the exe:
..\National Instruments\shared\nicontdt.dll
..\National Instruments\shared\nicont.dll
..\National Instruments\shared\LabVIEW Run-Time\ver\* (including all sub-directories)
There are a few things that, depending on whether used by your app, may not need to be included. For example:
..\National Instruments\Shared\LabVIEW Run-Time\ver\Errors
Converts and displays LabVIEW errors to the user. If you don't have this directory, errors may be displayed in a non-sensical format, or even not at all. Note: if you have custom error files (like xml onesyou've created, then put them in here).
..\National Instruments\Shared\LabVIEW Run-Time\ver\models
These are the control/indicator models - have alook through the directory, and remove those that you don't need.
..\National Instruments\Shared\LabVIEW Run-Time\ver\PlugInControls
Remove anything out of here that you don't need (eg: image control/indicators, etc)
..\National Instruments\Shared\LabVIEW Run-Time\ver\script
This is where interfaces to Matlab, HiQ and the like are kept - delete them if you don't need them
..\National Instruments\Shared\LabVIEW Run-Time\ver\lvjpeg.dll
..\National Instruments\Shared\LabVIEW Run-Time\ver\lvpng.dll
If you're not doing anything with jpegs or pngs, then you don't need these either.
That said, if you're using 7.1, then there's a whole bunch of other files in the ..\National Instruments\Shared\LabVIEW Run-Time\ver\ folder - just have a look at the names and experiment a little
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Hiding Poplist Values at Runtime

Hi All,
I have a Poplist Variable Type with values 'A','B','C','D' and 'E'.
I want hide the values 'A' and 'B' at runtime.
I have two pages Search and Create. On Search page all values should be visible.
And on create page only 3 values ('C','D','E') must be visible in Poplist.
How to achieve this?
Thanks,
SK

Here is the code snippet requested by you
         OAApplicationModule am = pageCotext.getApplicationModule(webBean);
         ItemSummaryVOImpl vo = (ItemSummaryVOImpl)am.findViewObject("ItemSummaryVO1");
         vo.setWhereClause(null);
         vo.setWhereClause("Item_id <>:1");
         vo.setWhereClauseParam(0,3);Above i am setting item_id not equal to 3 same way you can bound your VO query such that and vo does not contain particular values.
Thanks
{color:green}AJ{color}

Hiding scrollbar at runtime

Similar Messages

Maybe you are looking for