Hiding sub total values in the ALV o/p

Hi,
I have a requirement wherein i have to display some fields for sub total based on the sorting field.
I my report, i have G/L Account, GR value, IR value, Amt in Doc Curr and Doc currency.
Initially, i have to do the subtotal based on G/L account. For e.g. If we have two G/L account 1 and 2, then after the G/L account 1 and G/L account 2, i have to display the subtotals for GR value and IR value. This part is aboslutely working fine.
Now, In one G/L account, we are having multiple currencies. Suppose G/L account 1 has USD and EUR. Now within the G/L account 1, i have to display the subtotal for Amt in Doc Curr based on the currency key, but when i am passing this field to slis_sortinfo_alv, it is calculating the subtotals for GR value, IR value, Amt in Doc Curr.
Here, i need to hide the subtotal values for GR value, IR value.
Any pointers to this will be highly appreciated.
Thank you.

Similar Messages

Sub Total Text in an ALV using FACTORY Method

Hi Gurus,
My requirement is simple, but I couldn't find any answers under SDN or any other forums. Some of you may ask me to check for the SCN posts, but I almost checked everything.
My requirement is - When I get the Sub-total in my ALV, it should print a text other than the field which has got sub-total value.
My ALV Schema:
Field1 | Field2 | Field 3 |
____   |______ |______ |
           |             |             |
           |             |             |
          Tot. Qty | 1000.00|
I have sorted and added the subtotal = 'X' for the field which I need the Subtotal. Added Aggregations to Field3. But where and how to the field 'Tot. Qty', so that it should appear at the Sub-Total Level.
Please guide me if I've missed any of the forums. Again my requirement is to print the Field Name.
Regards,
-Wahid Hussain Syed.

Hi,
You can view this thread for example Display constant text in intermediate results column of SALV as it says that this is a limitation in SALV that "The output of totals and subtotals is handled solely by ALV. You can neither pass the results to your application nor manipulate them in any way.". But you can see a work around done for this problem, to be frank that I have not done that and I am only providing this link for your reference.

Color the sub-total row in an alv-grid

Hi all.
I work on SAP 4.7 WAS6.20 and output a table with the cl_gui_alv_grid. I´m able to color special rows (or columns) in the alv grid. But I want to color individually the sub-total lines (like the lines before) and don´t want the yellow color for all of the sub-total lines.
Do you know how to color the sub-total-lines?
Thanks a lot.
Michael

Hi,
U can color an individula row see the link below
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
* To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
        INCLUDE STRUCTURE zsflight.
*       Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
* Loop trough the table to set the color properties of each line. The color properties field is
* Char 4 and the characters is set as follows:
* Char 1 = C = This is a color property
* Char 2 = 6 = Color code (1 - 7)
* Char 3 = Intensified on/of = 1 = on
* Char 4 = Inverse display = 0 = of
     LOOP AT gi_sflight INTO g_wa_sflight.
      IF g_wa_sflight-paymentsum < 100000.
        g_wa_sflight-line_color    = 'C610'.
      ENDIF.
      MODIFY gi_sflight FROM g_wa_sflight.
    ENDLOOP.
* Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
* Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
      EXPORTING i_structure_name = 'SFLIGHT'
                             is_layout                = gs_layout
      CHANGING it_outtab                 = gi_sflight
see the link
http://www.sapgenie.com/abap/controls/alvgrid.htm

Format the total value in the column of the graph table

Hello all,
I have a graph table and I need to format the total value in the column of the table.
I am trying to find my table bean with the code below but it's not working in the processRequest. Is there anything else that should be done?
// Get the graph
OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyGraph");
// Get the table
OATableBean tblBean = (OATableBean)graphBean.findChildRecursive("MyTable");
The tblBean is null in the processRequest. In the processFormRequest the tblBean is not null.
Thanks and Regards,
Andrea

Hi,
The code OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyTable"); does not work because in this case I am getting the table but casting to a graph.
The MyTable bean is a child of MyGraph.
When creating a graph bean we have the option to create a table as a child (select your graphTable region in the Structure pane, and choose New > tabularFormat - to create the table).
The table bean child I can get just in the processFormRequest, but the graph I can get in both processRequest and processFormRequest.
I need to get the table bean in the processRequest to format the total value column.
Do you know if is there anything else that should be done to format the total column?
Thanks and Regards,
Andrea

Line item pricing based on total value of the order

Hi,
We need to charge as a separate line item (material) 'Insurance' as a % based on the total value of the order less one line item. Our orders are created on the web and posted via a BAPI.
(a) depending on where the customer is located, we charge a certain added shipping cost.
(b) the customer has the choice to ask for insurance or not.
The actual order may be 10 lines totaling $1,000 and due to location, the BAPI slaps on an added line item of $100. If the customer chose the insurance option, the BAPI needs to slap on another line item whose value would be, say 2% of the total order, i.e. 2% of 1000 (instead of on 1000+100). Of course, if the customer doesn't choose this option he is not charges this extra line and further if the customer is not in the particular region, the 100 charge may also not be there.
The 2% can vary time to time so needs to be driven by a condition record based on %.
How can we achieve this in the pricing procedure? The logic of how the BAPI will function is clear to us, we are stuck on the pricing procedure configuration.
Glad to answer any further questions you may need for clarifications.
Many thanks!

Ideally insurance would be levied on end customer based on Inco Terms like CIF, DDU etc.,
So you can have an access sequence for which you can make use of tables like 033 & 034 in V/07. In VK11, for this combination, maintain the required insurance percent.
In condition type V/06, for this condition type, maintain "C" for Manual entries, since you have indicated that customer has the choice. Otherwise, this can be populated automatically in sale order.
Similarly, for shipment cost also, you can have the Inco2 as one of the combination so that based on region, this condition type will be populated in sale order. If you have shipment cost configured, then this can be achieved.
In your pricing procedure, you have to assign the shipment cost condition type next to insurance and assign the From-To step accordingly.
thanks
G. Lakshmipathi

Displaying Total values at the bottom of the page.......

Dear All,
I am facing problem for aligning the total values at the bottom pf the page.The total values should be displayed exactly at the bottom of "qty" and "price" fields.On the page I have items,description also apart from these qty and price fields.
Any info plzzzzzzzzzzzzzzzzzzzz..

Hi,
Try aliging your values using the TableLayout.
Thanks.

How to change sub total value in ALV Grid.

Hi All,
Can u please explain how to change SUBTOTAL Value in ALV Grid display based on another field value.
EX; F1 subtotal is initial then we have to modify the F2 sub total to 9999.9.
Thanks
Radha.

Hi Radha,
I doubt if that can be changed....because the event that i was referring to in my previous post works with ALV List display...But in any case you can try that.....
There is an event in SLIS....(As i told you, i dont remember the name and currently i dont have access to SAP system, so i am not able to verify and let you know that event name).....
Other thatn TOP and END of PAGE events, there is an event for sub-total text......i think it would start with "SUBTOTAL"...
you need to use that event in your events table and pass it to ALV Grid display.
Then create a sub-routine with that name (As you do for TOP-OF-PAGE event)....and in this event you can change the values in runtime (PROVIDED, this event gets triggered for ALV GRID).....
If this does not work, i think calculating sub-totals while you build the internal table would be a better option....(If you have time constraint....else you can do some more research on the same)........
Best Regards,
Ram.

Sub totals based off the value of a dimension

Hi,
I have a requirement to apply sub totals to a dimension at certain levels of a hierarchy.
From what we've implemented, the typical Level-Based Hierarchy has been replaced by a Flat Hierarchy, so instead of accounts appearing at different levels and in different columns (I.E Level 31, Level 30, Level 29 ... ), they appear in 1 single column. A seperate column called Node Depth determines the level at which these accounts sit.
Essentially, I just want to show sub totals for values 2 and 3 in the Node Depth column.
Is there a way to do this in OBIEE? I've only been able to get ALL subtotals to appear.
Thanks

Hi Chris,
You can either use the FILTER...USING... function in answers or you can create distinct, filtered LTSs in the RPD which will then represent your node depth. I.e. you'd have, in your example, 8 LTSs with differing fragmentation content of "Node Depth" = 1 ... = 8

REGARDING: Sub total activation button in alv

hi,
I had made dis report and added the feature SUB total ,but the problem is when i select 1 coloumn den it used to display correct sub total but when i choose all these buttons den it does not display the correct sub - total.
PLZZ GO THROUGH THE CODE AND HELP ME OUT WHAT PROBLEM IS WITH IT?
Moreover it does not display the RADIO BUTTON ACTIVE when i execute the report.
here is d code:-
*& Report ZTET2
REPORT ZTET2.
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
DATA : DATE1(15) TYPE C,
DATE2(15) TYPE C,
TITLE(65) TYPE C,
DT(25) TYPE C.
DATA : ITEVENT TYPE SLIS_T_EVENT.
DATA: lv_sort TYPE slis_sortinfo_alv,
      t_sort type slis_t_sortinfo_alv.
DATA : repid LIKE sy-repid.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
      MATNR LIKE ISEG-MATNR,
      ITEMID(6) TYPE C,
      MEINS LIKE ISEG-MEINS,
      MENGE LIKE ISEG-MENGE,
      WRTZL LIKE ISEG-WRTZL,
      BUCHM LIKE ISEG-BUCHM,
      WRTBM LIKE ISEG-WRTBM,
      WERKS LIKE ISEG-WERKS,
      BUDAT LIKE ISEG-BUDAT,
      ZLDAT LIKE ISEG-ZLDAT,
      MTART LIKE MARA-MTART,
      ITEMDESC LIKE MAKT-MAKTX,
      DIFFQTY LIKE ISEG-BUCHM,
      DIFFVALUE LIKE ISEG-WRTBM,
      GRUND LIKE ISEG-GRUND,
      GRTXT LIKE T157E-GRTXT,
      BWART LIKE T157E-BWART,
      REAS TYPE C LENGTH 15,
      END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT OBLIGATORY NO-EXTENSION,
                 M_TYPE FOR MARA-MTART,
                 IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
CONCATENATE R_DATE-LOW6(2) '.' R_DATE-LOW4(2) '.' R_DATE-LOW+0(4) INTO DATE1.
CONCATENATE R_DATE-HIGH6(2) '.' R_DATE-HIGH4(2) '.' R_DATE-HIGH+0(4) INTO DATE2.
TOP-OF-PAGE.
PERFORM PG_HEADER.
   START-OF-SELECTION.
SELECT AMATNR AMEINS AMENGE AWRTZL ABUCHM AWRTBM AWERKS ABUDAT AZLDAT BMTART AGRUND CBWART
   FROM ISEG AS A INNER JOIN MARA AS B ON BMATNR = AMATNR
   INNER JOIN MSEG AS C ON AMBLNR = CMBLNR
   INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE BMATNR = AMATNR AND BMEINS = AMEINS AND AWERKS = PLANT AND ABUDAT IN R_DATE AND BMTART IN M_TYPE AND BMATNR IN IT_M.
SORT ITS1 BY MTART.
LOOP AT ITS1.
     ITS1-ITEMID = ITS1-MATNR+12(6).
     ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
     ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
     SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
     SELECT SINGLE GRTXT INTO ITS1-GRTXT FROM T157E WHERE GRUND = ITS1-GRUND AND SPRAS = 'E' AND BWART = ITS1-BWART.
     MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'PHYSICAL INVENTORY AUDIT REPORT             PLANT : ', PLANT.
ENDFORM.
*&      Form PRN_SMSTOCK_ALV
      text
--> p1        text
<-- p2        text
form PRN_SMSTOCK_ALV .
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event   type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_subtot TYPE slis_t_sortinfo_alv,
      subtot LIKE LINE OF t_subtot.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART'     'MTART'     'MARA' '15' space 'MATERIAL TYPE'        space space space space space space space space SPACE t_fieldcat 'L' 'L',
2 'ITEMID'    'ITEMID'    'MARA' '7'   space 'ITEM ID'              space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX'     'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS'     'MEINS'     'MARA' '5'   space 'UOM'                  space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE'     'MENGE'     'ISEG' '13' space 'ORG.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL'     'WRTZL'     'ISEG' '13' space 'ORG.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM'     'BUCHM'     'ISEG' '13' space 'PHY.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM'     'WRTBM'     'ISEG' '13' space 'PHY.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY'   'MENGE'     'ISEG' '13' space 'DIFF.INV.QTY'         space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL'     'ISEG' '13' space 'DIFF.INV.VALUE'       space space space space space space space space SPACE t_fieldcat SPACE 'P',
11 'BUDAT'     'BUDAT'     'ISEG' '18' space 'CORRECTED DATE'       space space space space space space space space SPACE t_fieldcat 'C' 'C',
12 'GRTXT'     'GRTXT'     'ISEG' '18' space 'REASON'               space space space space space space space space SPACE t_fieldcat 'L' 'L',
13 'REAS'      'REAS'      'ISEG' '18' space 'AUTH.BY'              space space space space space space space space SPACE t_fieldcat 'C' 'C'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
perform get_subtotals.
w_status = ''.
w_repid = sy-repid.
w_comm   = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      i_Callback_top_of_page   = 'Top-of-page'
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
      tables
      t_outtab                 = ITS1
      exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv
      P_JUST
      P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
wa_fieldcat-t_subtot = p_subtot.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
    WA_FIELDCAT-JUST = P_JUST.
ENDIF.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-Input     = 'X'.
    wa_fieldcat-edit     = 'X'.
    wa_fieldcat-do_sum = 'x'.
   wa_fieldcat-checkbox = 'x'.
   wa_fieldcat-hotspot = 'x'.
    ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
          it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT        : '.
x_heading-info = PLANT.
append x_heading to t_heading.
IF DATE2 = '00.00.0000'.
CONCATENATE DATE1 'to' DATE1 INTO DT SEPARATED BY SPACE.
ELSE.
CONCATENATE DATE1 'to' DATE2 INTO DT SEPARATED BY SPACE.
ENDIF.
X_heading-TYP = 'S'.
X_heading-key = 'PERIOD         :'.
X_heading-INFO = DT.
APPEND x_heading TO t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL NO. :'.
x_heading-info = ' ASDFADDFAAS DATE : 11.04.2007'.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
FORM get_subtotals.
CLEAR lv_sort.
lv_sort-fieldname = 'MENGE'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 3.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'WRTZL'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 4.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'BUCHM'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 5.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'WRTBM'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 6.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFQTY'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 7.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFVALUE'.
lv_sort-tabname = 'ITS1'.
lv_sort-spos = 8.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
ENDFORM.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
endform.

Don't give the ratios (quantity, amount, etc.) in the IT_SORT parameter, but the criteria of sorting. (material type, material number, etc.)
In the field catalog IT_FIELDCAT of the ratio, give the do_sum = 'X'.
Regards

Changing totals value in hierarchical alv for a particular level/row

Hi,
I am displaying a hierarchical ALV having 4 levels.
Using field catalog, totals for all dynamic columns are found out.
I have a requirement not to display totals value for first and second levels.
And if possible, to display another value.
Tried using CL_GUI_ALV_TREE->change_node.
But it not updating.
Please suggest a solution.
Thanks,
Nisha Vengal.

Hi Ten Mariga,
I wonder why the second select Query is needed at all instead you can use
---> Not Needed
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
----> Instead you can do
READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
Append wa_zcontact to Second_table.
And you can use the Second_table to display the second ALV. The second Select Query will affect the performance too.
Cheers,
Krishnakumar B.

Sub Total value is empty in parent child hierarchy pivot table

Hi All,
I am using obiee 11.1.1.6.2 in Test environment. Is it a known issue/bug for 11.1.1.6.2 to show empty/blank values for sub total when using parent child hierarchy pivot table. The sub total for parent value is showing but sub total for child value is coming blank. However, in 11.1.1.5.0, we do not have any issue with this.
Is it a known bug in obiee 11.1.1.6.2?
Thanks,
Sushil

Yes it is a known bug...
Thanks.

How to Show total value in the header 2nd page but based on 1st page footer

How to show total value in header in report builder but i have the total have related with the total in footer.
Example
===============================================
Page 1
Empno Ename Sal
1 Scott 1000
2 ALlen 2000
3 Susi 1000
Total Sal Page 1: 4000
===============================================
Page 2
Total Sal Page 1: 4000 --> How to get it?????
Empno Ename Sal
4 Budi 1000
5 Roger 200
6 George 2000
Total Sal Page 2: 3200
Please Help..
Thanks

hmm .. what i would do is
- create a placeholder column
- create a field in the header and one in the footer
- have the footer field reference the summary column
- have the header field reference the placeholder column
- create a fromat trigger on the footer field to
store the value of the footer into the placeholder column
so when the report is executed and the footer field is formatted, the format trigger stores the current value of the summary in the placeholder. then the pagebreak occures and the header field is formatted .. printing the value.
there might actually be an easier way, just reference the two fields to the same summary column and in theory, since there is nothing happening between the time when the footer is formatted and the header is formatted, the values should be the same .. however this is a theory and i have not actually tested this. since reports does all kinds of fancy optimization this might have unexpected results, but it's worth a try.
thanks,
ph.

Clear the values in the ALV report after calculating Subtotals

Hi All,
In my ALV report, I am displaying subtotals by passing DO_SUM in the Field Catalog.
Now my problem is in the display I do not want the individual values to be displayed, I want to hide the values in the column(Not the whole column) but I want to display the subtotal of these values in the Subtotal Row.
Example:
Item1   10   20
Item2   20   30
Item3   10   50
           40   100
As per our requirements, the output should be
Item1
Item2
Item3
          40   100
How can this be done? Please suggest.

Populate i_sort table for the fields for which u want subtotal as shown below:
*&      Form sub_populate_sort
      Populate ALV sort table
      No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort
Then when populating the field catalog tables use:
wa_lfl_fcat-no_out         = 'X'.        "No output
Then display ur data:
This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
Regards,
Joy.

Adding TOTAL icon in the ALV

Hi,
I am using ALV grid display in my program. I have used the FM 'REUSE_ALV_GRID_DISPLAY'. I am unable to get the TOTAL icon in the toolbar. Please suggest me how to get the functionality.
Thanks in advance.

CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
*I_GRID_TITLE = TIT
*IS_LAYOUT = GD_layout
it_fieldcat = fieldcatalog[]
*i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_save = 'A'
*IS_VARIANT = LS_VARIANT
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2
form set_pf_status USING rt_extab TYPE slis_t_extab.
set pf-status 'ZSTANDARD'.
endform.
Double click on the 'ZSTANDARD' and create the object.
Then Goto menu-- extras->Adjust Template
select List Viewer radio button. then click on ok. It will give u all menus...Select the required menus....
Edited by: mujib tirandaz on Apr 13, 2009 2:57 PM

How to find the total value of the Production order

HI ,
I am developing one report in which , custumer have a req. to show the total value (in Dollar) of all open production order as well as the past production order ( not DELEvered & teco ) for the selected plant . for that i need BAPI or table name .
Regards
Satish

Hi,
For production order nos. - AUFK or AFKO
For production order status - JEST & to know the status eg REL etc, refer TJ02
For costs - COSS & COEP (Pass order nos. to the field OBJNR as OR followed by 12 digit order number)
Hope the above helps.
Regards,
Vivek

Hiding sub total values in the ALV o/p

Similar Messages

Maybe you are looking for