Hierarchial Input Parameters
Hi All,
I have created a Crystal report with SAP BW Database. On executing the SAP BW Query in the BEx Analyser, I find the input parameters to be displayed in hierarchial format. When I use that query in the Crystal Report, I get only few of those input parameter values that too in a single list.... I need all of them to be displayed in the same hierarchial format..
Please help me on this issue.
Thanking You
Regards
Eswari.B
Hi Eswari,
when you publish the report with the publishing integration from SAP BI to BusinessObjects Enterprise and then call the report from InfoView you will receive a hierarchical tree for hierarchy node variables
Ingo
Similar Messages
-
Hierarchy on HANA Calculation View with Optional Input Parameters Fails
Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
KenHi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad -
Using calculation view in excel with input parameters
Hello
I have a calculation view which receives 2 input parameters for a range of dates, when i create the connecction with Excel i get the error "sql processing error: Hierarchy source query: SQL: column store error: search table error: [34092] search on calculation model requires parameters: Required variable $$MyVariable$$ is not set"
I would like to know how can i pass the parameteres from excel to my calculation view??
ThanksI doubt this can be achieved with a native Excel connection. Try SAP Advanced Analysis for Office. (I believe it may now just be called Analysis for Office).
-
What are the hierarchy relevant parameters?
What are the hierarchy relevant parameters?
<sen_dt>
<prefix>
<heads>
<dc>
<pc>
<name>
<main>
<dcno>
<pcno>
<name1>
<rec_dt>
<prefix>
<District_code> District code optional
<port_code> port code 1
<name> name
<main>
<District_code_no>
<port_code_no>
<name1>
content conversion
document name:<sen_dt>
document namespace:http::----
document offset:--
recordset name:input
recordset structure:heads,1,main,*
recordset sequence:Ascending
recordset per message:----
keyfield name:---
prefix.fieldfixedlengths:---
prefix.endSeparator:---
prefix.fieldNames;---
prefix.keyFieldvalue:--
prefix.keyFieldlnStructure:---
main.fieldFixedLengths:9,
main.fieldSeparator:|
main.endSeparator:'nl'
main.fieldNames:district code,port code,name
main.keyFieldValue:
main.keyFieldlnStructure: -
Hi All..
We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
SELECT *
FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
While validating the above code we are getting an error.
I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
Thanks in advance.Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks, -
How to log input parameters for Function Modules?
Hi,
I need to create a Logging system to trace input parameters for function modules.
The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
For example, I'd like to write a function/class method that can log both these functions modules:
Function DummyA
Input parameters: A1 type char10, A2 type char10.
Function DummyB
Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
Now the questions...
- Is there a "standard SAP" function that provide this functionality?
- If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
- If not, how can I loop at Input parameters in a way that is independent from the function module interface?
Thank you in advance for helping!check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
FUNCTION y_test_fm.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(PARAM1) TYPE CHAR10
*" REFERENCE(PARAM2) TYPE CHAR10
*" REFERENCE(PARAM3) TYPE CHAR10
DATA: ep TYPE STANDARD TABLE OF rsexp ,
ip TYPE STANDARD TABLE OF rsimp ,
tp TYPE STANDARD TABLE OF rstbl ,
el TYPE STANDARD TABLE OF rsexc ,
vals TYPE tihttpnvp ,
wa_vals TYPE ihttpnvp ,
wa_ip TYPE rsimp .
FIELD-SYMBOLS: <temp> TYPE ANY .
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
EXPORTING
funcname = 'Y_TEST_FM'
* INACTIVE_VERSION = ' '
* WITH_ENHANCEMENTS = 'X'
* IGNORE_SWITCHES = ' '
* IMPORTING
* GLOBAL_FLAG =
* REMOTE_CALL =
* UPDATE_TASK =
* EXCEPTION_CLASSES =
TABLES
exception_list = el
export_parameter = ep
import_parameter = ip
* CHANGING_PARAMETER =
tables_parameter = tp
* P_DOCU =
* ENHA_EXP_PARAMETER =
* ENHA_IMP_PARAMETER =
* ENHA_CHA_PARAMETER =
* ENHA_TBL_PARAMETER =
* ENHA_DOCU =
EXCEPTIONS
error_message = 1
function_not_found = 2
invalid_name = 3
OTHERS = 4
IF sy-subrc = 0.
LOOP AT ip INTO wa_ip .
MOVE: wa_ip-parameter TO wa_vals-name .
ASSIGN (wa_vals-name) TO <temp> .
IF <temp> IS ASSIGNED .
wa_vals-value = <temp> .
ENDIF .
APPEND wa_vals TO vals .
ENDLOOP .
ENDIF.
ENDFUNCTION. -
How to write a SQL query in SAP B1 2007 B with input parameters?
How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?
The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon -
How to bind/pass multiple input parameters to sql query in BPEL Process
Hi,
I have a requirement to invoke a query on a database table to fetch the records based on the few input values or bind variables?
I have created a Partner link using the DBAdapter service and have used custom SQL, how can i bind and pass multiple bind/input parameters for these queries.
foreg: if i have to query employee records based on name , desgination and age, these three params would be my input parameter that i will pass when i invoke the BPEL process, bow how can i pass these parameters to the partner link using DBADAPTER service.
Please help
RegardsIf the parameter-value is not known beforehand and cannot be determined based on the process instance data at that time, there are 2 options. Either invoke the PL/SQL procedure you named using a DB adapter service to get the value and pass it to the other DB adapter service. Or create a single service (e.g. PL/SQL procedure) that determines the parameter value, executes the query and returns the result. However, this is more a design issue. Does it makes sense to combine these actions in a separate service and use it or are these actions not related? You furthermore state that additional (DB adapter) services make the process heavier. Do you have strict requirements on the time process-instances may run or other such requirements? If not, I think the design-choice on whether combining these actions in a single service should have more priority.
-
Calling report from a form with user input parameters
Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM -
How to validate the input parameters in Oracle BI Publisher reports
Hi
i am new to Oracle BI Publisher
I am using OBI for generating simple reports.
here i need validation for input parameters (Date Parameter) and also want to disable the Date filed so that user can select through the calendar component.
Here validation in the sense, the system must validate the date and alert the user with an appropriate message
Can anyone please provide me the solution in detail.
Thanks in advance
Edited by: user10185520 on Aug 26, 2008 6:15 AMI have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!! -
How to make input parameters as optional in the function definition
I have created a function for a data service which is at the Normalized layer and has 3 input parameters.
This function is called at the Integration layer in which we have to pass only one parameter. But for the remaning 2 parameters it is throwing an error as we cannot pass those parameters.
Is it possible that we can pass less number of parameters in the higher layer.
I had also made those parameters as optional in the function definition(by applying '?' while defining the arguments-e.g. $x as xs:string?), but error was thrown while generating the query plan.
I have attached a Demo project, in which i have defined a function at the normalized layer and this function is been called at the integration layer.
Thanks,
KinjalThanks mreiche for the reply
But the problem is that while writing
function myfunction( arg1 as xs:string, $arg2 as xs:string?) { ... }
in function definition in the normalized layer, the query plan is throwing following error:-
com.bea.ld.QueryException: Cannot generate XQuery for the function {ld:DemoProject/Normalized/TestGeo}getGeo:3
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108) at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:290)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:248) at com.bea.ld.Server_ydm4ie_EOImpl_816_WLStub.executeFunction(Unknown Source) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel.compileFunction(QueryPlanPanel.java:583) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel.access$900(QueryPlanPanel.java:39) at workshop.liquiddata.xds.views.queryplan.QueryPlanPanel$5.run(QueryPlanPanel.java:469) at java.lang.Thread.run(Thread.java:534)
Caused by: com.bea.ld.QueryException: Cannot generate XQuery for the function {ld:DemoProject/Normalized/TestGeo}getGeo:3 at com.bea.ld.EJBRequestHandler.invokeFunction(EJBRequestHandler.java:720) at com.bea.ld.EJBRequestHandler.executeFunction(EJBRequestHandler.java:339) at com.bea.ld.ServerBean.executeFunction(ServerBean.java:95) at com.bea.ld.Server_ydm4ie_EOImpl.executeFunction(Server_ydm4ie_EOImpl.java:312)
at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:429)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: com.bea.ld.server.FunctionCallQueryBuilder$QueryBuilderException: The following parameter type is not supported: {http://www.w3.org/2001/XMLSchema}string?
at com.bea.ld.server.FunctionCallQueryBuilder.addParameter(FunctionCallQueryBuilder.java:257)
at com.bea.ld.server.FunctionCallQueryBuilder.buildQuery(FunctionCallQueryBuilder.java:99)
at com.bea.ld.EJBRequestHandler.invokeFunction(EJBRequestHandler.java:716)
But no error is thrown when I call this function at the Integration layer,using
for $f in mfunction( 'test', () )
and the output which i get is as expected. -
Error when using Analytic view with Input Parameters
Hi,
I am trying to create an info space based on my Analytic view which has input parameters. The infospace is validated and indexed without any issue. However when I ran the view, I get an error (50011) as it is unable to fetch any results. I tried using an infospace based on Calculation view with input parameters and the explorer view works without any issue.
Has anyone faced similar issues?
We are using HANA SP 6 rev 67 and BI 4.0 SP 4.
Also is there a way to enable input prompts for the users when they refresh the BO Explorer view? If not currently available is there any work around ?
ThanksHello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks, -
Crystal Report with standard Input-Parameters in InfoView
Hi there,
i've created a crystal report which has non-optional input parameters, e.g, Date from ... Date to ...
I've managed to fill this parameter with standard parameters if the user does not choose a value. e.g. date is today - 14 days.
If i start the report in crystal and do not enter a input-parameter, it gets it input parameer automatically, see:
(if not hasvalue({?PARA_TA_von}) then ({PW_BO_HU_TA.LTAP-WDATU}>=CurrentDate-14) else ({PW_BO_HU_TA.LTAP-WDATU}>={?PARA_TA_von}))
It works perfectly in crystal. But if i start the Report in Webintelligence Infoview, it doesn't work and i get the message to enter the input-parameters....
Any idea ?
Thanks,
SebastianHi Ingo,
I have tried the sample reports and other crystal reports created with data sources other than SAP which all work fine. The problem happens on all clients and the server when running reports with SAP data source.
I did find an error in the Tomcat logs.
[/SAP].[jsp] Thread [http-8080-Processor24]; Servlet.service() for servlet jsp threw exception
java.lang.NoClassDefFoundError: com/crystaldecisions/Utilities/LengthLimitedDataInputStream
I did manage to run one report which had 4 records but the other reports which vary from 432 - 2500 records return the error found in the tomcat logs.
I will be installing BOE XI 3.1 on my desktop to see if the still issue occurs in this release.
Thanks and Regards,
Paul. -
What are the input parameters for Function Module
Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan. -
FM: PROCESS_HU_INBOUND_DLVRY - wrong length of input parameters
Hello,
I am trying to pack materials into Handling Units in inbound delivery. Therefore i am using the Function Module PROCESS_HU_INBOUND_DLVRY, but it doesnu2019t work like it should.
After some further investigation and debugging of the function module i came to the conclusion that the Import parameters, stated bellow are of wrong file type / length:
u2022 I_SAVE_STEP TYPE C
u2022 I_PACKING_ACTIVITY TYPE C
u2022 I_PACK_TYPE TYPE C
Please see the picture bellow:
[pic1|https://photos-1.dropbox.com/i/o/rxYQUhHzQaBUWNTUAmo8WMQHWXCD8oOeBSg4TOqFHBc/204699/1317888000/9aef875/01.png]
Some further technical info:
u2022 When the function module is called the input parameters are compared to the constants, declared in the Include: RLMOBDDL, please see pictures bellow
[pic2|https://photos-2.dropbox.com/i/o/LIKxPZdNN8jSf18uM8SkNN5BAjomb0MG8mNOID3xeCE/204699/1317888000/c94cd10/02.png]
u2022 The FM is called with the input parameters:
o I_SAVE_STEP = ITEM
o I_PACKING _ACTIVITY = PACK
o I_PACK_TYPE = MAT
u2022 Input parameters are of the type C u2013 the default length is only ONE. Because of that the input parameters are trimmed down to length 1, so the FM actually works with wrong values:
o I_SAVE_STEP = I
o I_PACKING _ACTIVITY = P
o I_PACK_TYPE = M
u2022 The wrong values are then compared to the constants which are length 2, 3 and 4, as shown in the picture bellow.
[pic3|https://photos-3.dropbox.com/i/o/-LMF6MJiG_rFhZ4p9bxldorpUo-aVX_HjRU2RnMxsro/204699/1317888000/e5c2f1b/03.png]
So the FM PROCESS_HU_INBOUND_DLVRY does actually nothing, because the comparing of the input parameters with CONSTANTS fails.
Thanks in advance.
Kind regards,
MHi Marko,
call the fm in test mode (F8) and you will see, that these parameters are not of type C(1) but C without limited length. You can call it with varaiable parameter length for these parameters.
Regards,
Klaus
Maybe you are looking for
-
Convert document color mode to Pantone/Spot
I have a document in which i have 2 layers, each layer contains shapes. one layer is supposed to be Pantone 293, the other layer is Pantone 296. right now, the colors are in RGB. I saved as is, then saved as PDF and the printer whom im sending this t
-
Bug in OS X OpenGL texture handling, that can crash OS X ?
Hi, i think, i found a serious bug in Leopard (10.5.2 and 10.5.3). But i can't find any infos on that. Does this sound familiar to anyone? When i try to create large textures in OpenGL, i get a texture with noise in it. A closer look shows, that this
-
Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you.
-
[svn:fx-trunk] 10867: FIx up createInFontContext for when there are no embedded fonts
Revision: 10867 Author: [email protected] Date: 2009-10-05 09:50:12 -0700 (Mon, 05 Oct 2009) Log Message: FIx up createInFontContext for when there are no embedded fonts QE Notes: None Doc Notes: None Bugs: SDK-23563 Reviewer: Carol API Change:
-
Is InDesign CS6 the same as InDesign CC?
I have a CC membership and installed Indd CS6 a couple of months ago. Is InDesign CS6 actually now InDesign CC?