Hierarchies:urgent
Dear All,
I have to create DUNS number hierarchy on BW system.I will get the data from a non sap source system(LDB) via DB connect.
My problem is how to get this data from LDB to the BW system and how to create this hierarchy? do we need generic datasource or what i am clueless.?
As we have 3 levels in hierarchy the GU duns then DU duns then BU duns.
how i am going to proceed about this?
Please help me out.
Regards,
Suyash
How can a generic datasource can be used?
I think we need the exact structure for the hierarchy upload from the source system.
Its better to use a flat file.
Dont you think?
Regards,
Suyash
Similar Messages
-
To change hierarchies, Urgent!
Hi guys,
i have this new requirement when the user selects a
characteristic i(a free characteristic) s it possible to change the hierarchy of
another characteristic (this has 3 hierarchies with one as default). IF not what is the best possible solution
to recommend.
This is urgent.
Your help will be greatly appreciated.
Thanks
Message was edited by:
RealistUser can't change selected hierarchy; the only solution i can give you is to build another query based on the other hierarchy.
Hope it helps.
Regards -
Hi Community,
I have Vision Database and I need Help regarding HRMS Hierarchy.
I am trying to fetch HRMS Hierarchy by front end and also by back end,
but i couldn't able to find it.
So please if any one know then help me.
Thanks and Regards,
Vishal WagholeCheck these -
Re: Organization hierarchy Report
Re: I need to get the organization Hierarchies
urgent...on organization and their hierarchies.
Re: Help with hierarchical query
https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=organization+hierarc…
Cheers,
Vignesh -
Urgent...on organization and their hierarchies.
Hi,
We have list of organization names in HR and also each organization has its hierarchies.
Hr_all_organization_units is the table which has the list of names of the organization.
Now can somebody tell me the table name and the column name where i can find the sub orgs for a particular org in Hr_all_organization_units and
for example i wan't to list the names of the organizations and the list of sub organizations using SQL query, how to do that...
Please answer, its a bit urgent for me
thanks a ton
kumarCheck out if the below mentioned query is helpful to you.
SELECT ose.ROWID, ose.org_structure_element_id, ose.business_group_id
, ose.organization_id_parent, hou1tl.NAME, ose.org_structure_version_id
, ose.organization_id_child, hou2tl.NAME, ose.request_id
, ose.program_application_id, ose.program_id, ose.program_update_date
, ose.last_update_date, ose.last_updated_by, ose.last_update_login
, ose.created_by, ose.creation_date, ose.position_control_enabled_flag
FROM per_org_structure_elements ose
, hr_all_organization_units hou1
, hr_all_organization_units hou2
, hr_all_organization_units_tl hou1tl
, hr_all_organization_units_tl hou2tl
WHERE ose.organization_id_parent = hou1.organization_id
AND ose.organization_id_child = hou2.organization_id
AND hou1.organization_id = hou1tl.organization_id
AND hou2.organization_id = hou2tl.organization_id
AND hou1tl.LANGUAGE = USERENV ('LANG')
AND hou2tl.LANGUAGE = USERENV ('LANG')
Thanks,
Angelica. -
Urgent:Grand total in hierarchical alv
I am printing a hierarchical alv with subtotals. I want to print the grand total for the whole numeric columns ...
Can anyone explain me how i can do this.
Thanks and regards,
SubhakarHi,
In this case you not only require the totals but the subtotals also.
For achieving this output you will have to sort the alv on the first column and also give subtotals there.
use
data: SORTF TYPE SLIS_SORTINFO_ALV,
TSORT TYPE SLIS_T_SORTINFO_ALV.
in the function module reuse_alv_grid_display give
it_sort = tsort.
eg:
FORM ALV_SHOW.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-BOX_TABNAME = 'IT_DISPLAY'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = LAYOUT
IT_FIELDCAT = TCATALOG
IS_VARIANT = VAR1
I_SAVE = 'A'
IT_SORT = TSORT
IT_EVENTS = TEVENT[]
TABLES
T_OUTTAB = IT_DISPLAY.
ENDFORM . "ALV_SHOW
and write a subroutine for sort...
form sort.
CLEAR SORTF.
SORTF-spos = 1.
SORTF-fieldname = 'column_1'.
SORTF-tabname = 'IT_table used for display in alv'.
SORTF-up = 'X'.
SORTF-subtot = 'X'.
APPEND SORTF TO TSORT.
endform.
If this doesn't help I will send you the whole source of a sample program..
Abdullah -
Can i have a check box in the hierarchical tree in the icons place, urgent!!! please
Hi,
I'am working on the Hierarchical Tree structure which should have three levels, I need to have a check box in the place of the icon & if i select a node that node & the child nodes should get selected.
After this when i say move selected ( i'am trying to use picklist class also) the entire checked tree has to move to the display area to the right & should display as tree structure & after this if i save then the checked records which are moved to another text area should get saved!!
How to achieve this? I have the tree structure ready but the check box part is the worrying factor! & then moving the checked records to the right using picklist class is the second problem & finally saving records to database.
Any help in this regard will be deeply appreciated:)
If check box is not possible then i will have to look at other methods, will the tree structure allow checkboxes????
Thanks
MaheshNo the tree will not allow checkboxes
-
URGENT *** Hierarchical Tree in Forms 9i *** URGENT
Hello everybody,
for my company I need to build a hierarchical tree item, that will display static data over three levels. Let's say: departments, employees and employee projects.
How do I fill the Item?
When do I fill the Item?
Where do I fill the Item?
What are the elements of the SQL query, that fills the hierarchical tree?
Any help will be appreciated
[email protected]Note:210663.1 helped a bit.
I used the database column as the third element in the select part and put NULL as the fifth element. Then it worked.
Now I am looking for the way to add the employees, when the user selects / activates a department node. -
i would like to build a tree with branches and i don't know how to add branches to the root_node
is it possible and how can i do this in order to have something like this...
ROOT
|
toto
|--tata
|--titi
|
|--popo
|--papa
|--tutu
|--popo
it's urgent
THANKSYou didn't give quite enough information to approach the question. I am assuming you are using forms since that is the forum you are in. I will also assume that you are using an Oracle database and PL/SQL as the programming language.
One thought would be to implement the tree in a database table where each node is a record. If you didn't need to share the tree among users then you could implement it as a PL/SQL table on either the client side or server side. If the tree needed to be persistent for the duration of the session then you could make it part of package. If it needed to persist beyond the end of the session then a Database table would probably be your best bet.
With each record being a node you could have a field which points to the primary key of the node which is its parent. The root node could be represented by nodes who had parent fields of NULL, zero, 'root' ... This would be simple to maintain. However if searching is not efficient with this model or if programming requirements seem to be cumbersom then you could have each node have a child and sibling field. The parent would point to the first child and then the first child would point to its next sibling. The last sibling would have a NULL pointer.
Hope this was helpfull.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ERIC23:
i would like to build a tree with branches and i don't know how to add branches to the root_node
is it possible and how can i do this in order to have something like this...
ROOT
|
toto
|--tata
|--titi
|
|--popo
|--papa
|--tutu
|--popo
it's urgent
THANKS<HR></BLOCKQUOTE>
null -
Urgent: Add a custom line in Hierarchical ALV.
Hi
I am using the FM 'REUSE_ALV_HIERSEQ_LIST_DISPLAY' to display the header and item table details. However I would like to add a custom line below the item details of each section so that I can calculate the total (total of a particular field in the item table) and print it in this line....How do I do this....
Thanks..
VijayHi,
See the attached report which is used to display Hierarchial display for header and item;
REPORT zwmr_pick_status_report NO STANDARD PAGE HEADING
MESSAGE-ID zw.
Type Pools
TYPE-POOLS: icon, slis.
Tables
TABLES: tvst,
likp,
t30b,
vekp,
zhu_to_link,
zpallettr,
vttk,
zvantr.
Types
TYPES:
BEGIN OF ty_data,
lgtor LIKE likp-lgtor, " door
vbeln LIKE likp-vbeln, " delivery
wbstk LIKE vbuk-wbstk, " Goods movement status
kostk LIKE vbuk-kostk, " Picking status
posnr LIKE lips-posnr, " item
route LIKE likp-route, " route
wadat LIKE likp-wadat, " goods issue date
lvsta LIKE vbup-lvsta, " warehouse status
packvorschr LIKE vekp-packvorschr, " pack mnemonic
exidv LIKE vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zdep_point LIKE zpallettr-zdep_point, "Departur Point "Jvdm01
zcount_check LIKE zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print LIKE zvantr-zvan_print, " van manifest print
tknum LIKE vttk-tknum, " Shipment No "ANV 11523
zeod_print LIKE zvantr-zeod_print, " eod manifest print
zzpackclass LIKE vekp-zzpackclass, " package class
zzti LIKE vekp-zzti, " T.I. value
vstel LIKE likp-vstel, "Shipping point RM050906
anzpk TYPE znopack, "No of packages in dlv MB01+
END OF ty_data.
TYPES:BEGIN OF x_likp ,
vbeln LIKE likp-vbeln,
vstel LIKE likp-vstel,
lgtor LIKE likp-lgtor,
zzroute2lgtor LIKE likp-zzroute2lgtor,
route LIKE likp-route,
wadat LIKE likp-wadat,
zz2route LIKE likp-zz2route,
zzexproute LIKE likp-zzexproute,
zzroute2 LIKE likp-zzroute2,
anzpk LIKE likp-anzpk,
END OF x_likp.
TYPES: BEGIN OF x_vbuk,
vbeln TYPE vbuk-vbeln,
wbstk TYPE vbuk-wbstk, " Goods movement status
kostk TYPE vbuk-kostk, " Picking status
END OF x_vbuk.
TYPES: BEGIN OF x_lips,
vbeln TYPE lips-vbeln, " delivery
posnr TYPE lips-posnr, " item
pstyv TYPE lips-pstyv,
matnr TYPE lips-matnr,
charg TYPE lips-charg,
END OF x_lips.
TYPES: BEGIN OF x_vbup,
vbeln TYPE vbup-vbeln, " delivery
posnr TYPE vbup-posnr, " item
lvsta TYPE vbup-lvsta, " warehouse status
END OF x_vbup.
TYPES: BEGIN OF x_vepo,
venum TYPE vepo-venum, "Internal Handling Unit
Number
vepos TYPE vepo-vepos, "Handling Unit Item
vbeln TYPE vepo-vbeln, " delivery
posnr TYPE vepo-posnr, " item
exidv TYPE vekp-exidv,
END OF x_vepo.
TYPES: BEGIN OF x_vepo1,
venum TYPE vekp-venum, "Internal Handling Unit
Number
exidv TYPE vekp-exidv,
END OF x_vepo1.
Start of changes by ANV SR#11523
TYPES: BEGIN OF x_vttp,
tknum TYPE tknum, " Shipment No
tpnum TYPE tpnum, " Item No
vbeln TYPE vbup-vbeln, " delivery
laufk LIKE vttk-laufk, " leg indicator MB01+
END OF x_vttp.
End of changes by ANV SR#11523
Data
RANGES: r_del FOR likp-vbeln,
r_lgtor FOR likp-lgtor.
RANGES: r_vanno FOR zvantr-zvan_no,
r_palno FOR zpallettr-zpallet_no.
DATA: BEGIN OF number_range OCCURS 0,
mark(1),
id(3),
num(10) TYPE n,
desc LIKE zpalletmd-zdesc,
END OF number_range.
DATA: t_disp_tab TYPE STANDARD TABLE OF zpickdisp,
t_data_tab TYPE ty_data OCCURS 0 WITH HEADER LINE,
it_likp TYPE x_likp OCCURS 0 WITH HEADER LINE, "SUM
it_vbuk TYPE x_vbuk OCCURS 0 WITH HEADER LINE, "SUM
it_lips TYPE x_lips OCCURS 0 WITH HEADER LINE, "SUM
it_vbup TYPE x_vbup OCCURS 0 WITH HEADER LINE, "SUM
it_vepo TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
it_vepo2 TYPE x_vepo OCCURS 0 WITH HEADER LINE, "SUM
*{ INSERT UKMK900355 3
t_vepo_low TYPE x_vepo OCCURS 0 WITH HEADER LINE, " AS01
*} INSERT
it_vepo1 TYPE x_vepo1 OCCURS 0 WITH HEADER LINE, "SUM
it_vttp TYPE x_vttp OCCURS 0 WITH HEADER LINE,
t_disp_head TYPE STANDARD TABLE OF zpickhead.
DATA wa_item_tab TYPE zpickdisp OCCURS 0 WITH HEADER LINE.
"ANV SR#11113
DATA: w_numrnge LIKE number_range,
w_number(10) TYPE n.
DATA: t_likp LIKE likp OCCURS 0 WITH HEADER LINE,
t_lips LIKE lips OCCURS 0 WITH HEADER LINE,
t_vbuk LIKE vbuk OCCURS 0 WITH HEADER LINE,
t_vbup LIKE vbup OCCURS 0 WITH HEADER LINE,
t_vepo LIKE vepo OCCURS 0 WITH HEADER LINE,
t_vekp LIKE vekp OCCURS 0 WITH HEADER LINE,
t_vantr LIKE zvantr OCCURS 0 WITH HEADER LINE,
t_pallettr LIKE zpallettr OCCURS 0 WITH HEADER LINE,
w_likp like likp,
w_lips LIKE lips,
w_vbuk LIKE vbuk,
w_vbup LIKE vbup,
w_vepo LIKE vepo,
w_vekp LIKE vekp,
w_vepo TYPE x_vepo1,
w_vbup TYPE x_vbup,
w_vttp TYPE x_vttp, " ANV SR#11523
w_lips TYPE x_lips,
w_vbuk TYPE x_vbuk,
w_likp TYPE x_likp, "MB01-+
w_tplst LIKE vttk-tplst. "MB01+
DATA: s_variant LIKE disvariant, "MB01+
def_variant LIKE disvariant.
ALV DATA *****
DATA:
g_grid TYPE REF TO cl_gui_alv_grid,
g_sort TYPE slis_t_sortinfo_alv,
g_custom_container TYPE REF TO cl_gui_custom_container,
g_layout TYPE slis_layout_alv,
gt_fieldcat TYPE slis_t_fieldcat_alv,
t_fldcat LIKE LINE OF gt_fieldcat,
g_keyinfo TYPE slis_keyinfo_alv,
gt_events TYPE slis_t_event,
gs_event TYPE slis_alv_event,
w_sy_repid LIKE sy-repid.
DATA: BEGIN OF seltab OCCURS 0.
INCLUDE STRUCTURE rsparams.
DATA: END OF seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
CONTROLS: tc_tabcon TYPE TABLEVIEW USING SCREEN 0100.
LINES OF TABLECONTROL 'TC_TABCON'
DATA: g_tc_tabcon_lines LIKE sy-loopc.
DATA: ok_code LIKE sy-ucomm.
Constants
CONSTANTS: c_data_class LIKE klah-class VALUE 'DG_DATA',
c_mat_class LIKE rmclf-klart VALUE '001',
c_pack LIKE lips-mtart VALUE 'VERP',
c_a(1) VALUE 'A',
c_b(1) VALUE 'B',
c_c(1) VALUE 'C',
c_yes(1) VALUE 'X',
c_no(1) VALUE ' '.
Selection screen
standard report select options block
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-002.
SELECT-OPTIONS:
s_wadat FOR likp-wadat NO-EXTENSION OBLIGATORY. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
SELECT-OPTIONS: "TR01+
p_vstel FOR tvst-vstel. " Shipping Point "TR01+
SELECT-OPTIONS:
s_lfart FOR likp-lfart, " Delivery type
s_lgtor FOR t30b-lgtor, " Door selection
s_exidv FOR vekp-exidv, " Handling Unit
s_vbeln FOR likp-vbeln, " Delivery "MB01-+
s_lfdat FOR likp-lfdat. " Delivery date
PARAMETERS:
p_exdata AS CHECKBOX. " Show extra columns flag
SELECTION-SCREEN END OF BLOCK a.
van/pallet specific select options block
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_palno FOR zpallettr-zpallet_no, " no-extension,
s_vanno FOR zvantr-zvan_no. " no-extension.
SELECT-OPTIONS:
s_deppnt FOR zpallettr-zdep_point, "Jvdm01
s_tplst FOR vttk-tplst. "MB01
SELECTION-SCREEN END OF BLOCK b.
MB01 - START - Display variant
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-019.
PARAMETERS: p_vari LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK c.
MB01 - END
Value Request Events
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_palno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_pal_nos.
s_palno-high = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-low.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-low = w_number.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_vanno-high.
CLEAR: number_range, w_number .
REFRESH number_range.
select numbers and display pop up screen for selection
PERFORM select_van_nos.
s_vanno-high = w_number.
MB01 - START - display variant
F4-Help for variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
MB01 - END
At Selection Screen
AT SELECTION-SCREEN.
PERFORM validate_selections.
Initialization
INITIALIZATION.
MB01 - START INSERT
1. Transportation planning point
Import transportation planning point from user parameters and
populate
select option.
GET PARAMETER ID 'TDP' FIELD w_tplst.
MOVE: 'I' TO s_tplst-sign,
'EQ' TO s_tplst-option,
w_tplst TO s_tplst-low.
APPEND s_tplst.
2. Display variant
CLEAR s_variant.
s_variant-report = sy-repid.
Get default variant
s_def_variante = s_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = s_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
p_vari = s_variant-variant.
ENDIF.
MB01 - END INSERT
Start of selection
START-OF-SELECTION.
clear all data tables
CLEAR: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
REFRESH: t_likp,
it_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
IF NOT s_vanno IS INITIAL
OR NOT s_palno IS INITIAL
OR NOT s_deppnt IS INITIAL. "Jvdm01
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
PERFORM select_data_up.
ELSE.
otherwise the data can be selected from the delivery downwards
PERFORM select_data_down.
ENDIF.
End of selection
END-OF-SELECTION.
call hierarchical ALV display function module
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
i_save = 'X' "MB01+
is_variant = s_variant
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
TABLES
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORMS
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
INCLUDE zwmr_pick_o01.
INCLUDE zwmr_pick_status_reporto01 .
INCLUDE zwmr_pick_i01.
INCLUDE zwmr_pick_status_reporti01 .
INCLUDE zwmr_pick_f01.
INCLUDE zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
FORM select_pal_nos.
DATA: BEGIN OF t_palno OCCURS 0,
zpallet_no LIKE zpallettr-zpallet_no,
END OF t_palno.
select all available pallet numbers
SELECT DISTINCT zpallet_no FROM zpallettr
INTO CORRESPONDING FIELDS OF TABLE t_palno.
LOOP AT t_palno.
get pallet id
SELECT SINGLE zpallet_id FROM zpallettr
INTO number_range-id
WHERE zpallet_no = t_palno-zpallet_no.
get pallet description
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
FORM select_van_nos.
DATA: BEGIN OF t_vanno OCCURS 0,
zvan_no LIKE zvantr-zvan_no,
END OF t_vanno.
select available van numbers
SELECT DISTINCT zvan_no FROM zvantr
INTO CORRESPONDING FIELDS OF TABLE t_vanno.
LOOP AT t_vanno.
select van id
SELECT SINGLE zvan_id FROM zvantr
INTO number_range-id
WHERE zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
SELECT SINGLE zdesc FROM zpalletmd
INTO number_range-desc
WHERE zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
APPEND number_range.
ENDLOOP.
call pop up dialog box
CALL SCREEN 0100 STARTING AT 5 5.
ENDFORM. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
FORM select_data_down.
select all deliveries from LIKP that fulfill selection criteria
Start SU01 optmization changes
SELECT vbeln vstel lgtor route wadat "RM050906
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp"MB01-+
WHERE vbeln IN s_vbeln
AND vstel IN p_vstel
AND lfart IN s_lfart
AND wadat IN s_wadat
AND lfdat IN s_lfdat "MB01+
AND
( lgtor IN s_lgtor OR zzroute2lgtor IN s_lgtor ) ."MB01+
IF sy-subrc NE 0.
no data found
MESSAGE i007.
EXIT.
ENDIF.
IF NOT t_likp[] IS INITIAL. "SUM
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln. "SUM
select sales document headers from VBUK
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp "SUM
WHERE vbeln EQ it_likp-vbeln. "SUM
SORT it_vbuk BY vbeln.
select all relevant delivery items from LIPS
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
select all sales document line items from VBUP
SORT it_lips BY vbeln posnr. "SUM
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT it_vbup BY vbeln posnr.
select corresponding handling unit ID's (venum)
TR03 Replace
start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
SELECT vepoVENUM vepoVEPOS vepovbeln vepoposnr
FROM vepo as vepo
INNER JOIN vekp as vekp ON vepovenum = vekpvenum
APPENDING corresponding fields of table it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vepo~vbeln = it_lips-vbeln
AND vepo~posnr = it_lips-posnr
AND vepo~matnr = it_lips-matnr
AND vepo~charg = it_lips-charg
AND vekp~exidv IN s_exidv.
SELECT venum vepos vbeln posnr
FROM vepo INTO TABLE it_vepo2
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
SORT it_vepo2 BY venum vepos.
*{ INSERT UKMK900355 1
Ice-multis: replace lower-level HUs with highest level " AS01
PERFORM replace_highest_hu. " AS01
*} INSERT
Start of changes by ANV SR#11523
MB01 - extract shipment header as well to populate leg indicator
Therefore, join vttp with vttk
Limit as well by transportation planning point
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
IF NOT it_vepo2[] IS INITIAL.
SELECT venum exidv
FROM vekp INTO TABLE it_vepo1
FOR ALL ENTRIES IN it_vepo2
WHERE venum = it_vepo2-venum
AND exidv IN s_exidv.
ENDIF.
SORT it_vepo1 BY venum.
CLEAR: w_vepo, it_vepo.
LOOP AT it_vepo1.
READ TABLE it_vepo2 WITH KEY venum = it_vepo1-venum.
IF sy-subrc = 0.
it_vepo2-exidv = it_vepo1-exidv.
MODIFY it_vepo2 TRANSPORTING exidv
WHERE venum = it_vepo1-venum .
ENDIF.
ENDLOOP.
DELETE it_vepo2 WHERE exidv IS initial.
it_vepo[] = it_vepo2[].
TR03 Replace end
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
FORM select_data_up.
IF NOT s_vanno IS INITIAL.
if van then select van numbers and hence pallet numbers
SELECT * FROM zvantr INTO TABLE t_vantr
WHERE zvan_no IN s_vanno.
and vstel eq p_vstel."TR01-
IF NOT t_vantr[] IS INITIAL.
SORT t_vantr BY zvan_id zvan_no vstel zpallet_no. "SUM
SELECT * FROM zpallettr INTO TABLE t_pallettr
FOR ALL ENTRIES IN t_vantr
WHERE zpallet_no EQ t_vantr-zpallet_no
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
ELSE.
otherwise can get pallet numbers directly
SELECT * FROM zpallettr INTO TABLE t_pallettr
WHERE zpallet_no IN s_palno
AND zdep_point IN s_deppnt. "Jvdm01
and vstel eq p_vstel."TR01-
ENDIF.
IF NOT t_pallettr[] IS INITIAL.
from the pallet nos. we can select the handling units
SORT t_pallettr BY zpallet_id zpallet_no vstel exidv. "SUM
SELECT * FROM vekp INTO TABLE t_vekp
FOR ALL ENTRIES IN t_pallettr
WHERE exidv EQ t_pallettr-exidv
AND exidv NE space
AND exidv IN s_exidv "TR03+
AND ( exida = 'E' "TR01+
OR exida = 'F' ). "TR01+
ENDIF.
SORT t_vekp BY venum. "SUM
IF NOT t_vekp[] IS INITIAL.
build vbeln range from t_vekp.
LOOP AT t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
APPEND r_del.
ENDLOOP.
select all deliveries from LIKP that correspond to HU's
SELECT * FROM likp INTO TABLE t_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
ENDIF.
MB01- START
SELECT vbeln lgtor route wadat
FROM likp INTO TABLE it_likp
WHERE vbeln IN r_del
AND wadat IN s_wadat
AND lfart IN s_lfart.
SELECT vbeln vstel lgtor route wadat
zzroute2lgtor zz2route zzexproute zzroute2 anzpk "MB01-+
FROM likp INTO CORRESPONDING FIELDS OF TABLE it_likp
WHERE vbeln IN r_del
AND lfart IN s_lfart
AND wadat IN s_wadat "MB01-+
AND lfdat IN s_lfdat. "MB01+
MB01- END
ENDIF.
IF NOT it_likp[] IS INITIAL.
SORT it_likp BY vbeln . "SUM
select sales document headers from VBUK
SELECT * FROM vbuk INTO TABLE t_vbuk
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
SELECT vbeln wbstk kostk
FROM vbuk INTO TABLE it_vbuk
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln.
SORT it_vbuk BY vbeln. "SUM
select all relevant delivery items from LIPS
SELECT * FROM lips INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln
AND pstyv NE 'ZPAC'
AND pstyv NE 'ZGDP' "TR02+
AND lfimg GT 0. "TR01+
SELECT vbeln posnr pstyv matnr charg
FROM lips INTO TABLE it_lips
FOR ALL ENTRIES IN it_likp
WHERE vbeln EQ it_likp-vbeln
AND pckpf NE 'B' "cannot be packed "AS05
AND pstyv NE 'ZPAC' "AS05
AND pstyv NE 'ZGDP' "TR02+ "AS05
AND lfimg GT 0. "TR01+
ENDIF.
IF NOT it_lips[] IS INITIAL.
SORT it_lips BY vbeln posnr. "SUM
select all sales document line items from VBUP
SELECT * FROM vbup INTO TABLE t_vbup
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vbeln
AND posnr = t_lips-posnr.
Start of changes by ANV SR#11523
MB01 - START
join vttp with vttk to obtain leg indicator
SELECT tknum tpnum vbeln
FROM vttp INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln.
SELECT vttptknum vttptpnum vttpvbeln vttklaufk
FROM vttp INNER JOIN vttk
ON vttptknum = vttktknum
INTO TABLE it_vttp
FOR ALL ENTRIES IN it_lips
WHERE vttp~vbeln = it_lips-vbeln
AND vttk~tplst IN s_tplst.
MB01 - END
End of changes by ANV SR#11523
SELECT vbeln posnr lvsta
FROM vbup INTO TABLE it_vbup
FOR ALL ENTRIES IN it_lips
WHERE vbeln EQ it_lips-vbeln
AND posnr = it_lips-posnr.
SORT t_vbup BY vbeln posnr. "SUM
select corresponding handling unit ID's (venum)
SELECT * FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE t_vepo
FOR ALL ENTRIES IN t_lips
WHERE vbeln = t_lips-vbeln
AND posnr = t_lips-posnr
AND matnr = t_lips-matnr
AND charg = t_lips-charg.
SELECT venum vepos vbeln posnr
FROM vepo APPENDING CORRESPONDING FIELDS OF TABLE it_vepo
FOR ALL ENTRIES IN it_lips
WHERE vbeln = it_lips-vbeln
AND posnr = it_lips-posnr
AND matnr = it_lips-matnr
AND charg = it_lips-charg.
*{ INSERT UKMK900355 1
it_vepo2[] = it_vepo[]. " DS01
PERFORM replace_highest_hu. " DS01
it_vepo[] = it_vepo2[]. " DS01
*} INSERT
ENDIF.
build process table
PERFORM move_to_table.
ENDFORM. "select_data_up
*& Form move_to_table
move data to processing table
FORM move_to_table.
LOOP AT it_vepo.
CLEAR t_data_tab.
delivery lines.
CLEAR w_lips.
READ TABLE it_lips WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_lips BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_lips TO t_data_tab.
sales document line items
CLEAR w_vbup.
READ TABLE it_vbup WITH KEY vbeln = it_vepo-vbeln
posnr = it_vepo-posnr
INTO w_vbup BINARY SEARCH. "SUM
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
MOVE-CORRESPONDING w_vbup TO t_data_tab.
endif. "TR01-
sales doc header
CLEAR w_vbuk.
READ TABLE it_vbuk WITH KEY vbeln = it_vepo-vbeln
INTO w_vbuk BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_vbuk TO t_data_tab.
delivery header
CLEAR w_likp.
READ TABLE it_likp WITH KEY vbeln = it_vepo-vbeln
INTO w_likp BINARY SEARCH. "SUM
MOVE-CORRESPONDING w_likp TO t_data_tab.
MB01 - START
DATA: w_routetype TYPE i. "0=non-global,1=1st route,2=2nd
route,3=both
At this point move DOOR2 if it falls within the global route scenario
and the door2 is satisfies the selection criteria for door
1. Does delivery fall within global route scenario
CLEAR w_routetype.
IF w_likp-zz2route = 'Y' .
1.a. First route - does door1 satisfy the selection criteria
IF w_likp-lgtor IN s_lgtor.
w_routetype = 1.
MOVE w_likp-zzexproute TO t_data_tab-route.
1.b. Second route - does door2 satisfy the selection criteria
ELSEIF w_likp-zzroute2lgtor IN s_lgtor.
here we need to move door2 to lgtor
w_routetype = 2.
MOVE w_likp-zzroute2lgtor TO t_data_tab-lgtor.
MOVE w_likp-zzroute2 TO t_data_tab-route.
ENDIF.
If both routes satsify the criteria, append for 2nd leg ***REVISIT!
IF w_likp-lgtor IN s_lgtor AND w_likp-zzroute2lgtor IN s_lgtor.
w_routetype = 3.
ENDIF.
ENDIF.
MB01 - END
Start of changes by ANV SR#11523
MB01 - If the delivery falls within the global route scenario... need
to select either preliminary shipment leg OR subsequent leg
when laufk= 1 (prelim) and linked to route1, if laufk = 2 (subseq) &
linked to route2
Shipment Number
SORT it_vttp BY vbeln laufk.
CLEAR w_vttp.
CASE w_routetype.
WHEN 0.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
INTO w_vttp BINARY SEARCH.
WHEN 1.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '1'
INTO w_vttp BINARY SEARCH.
WHEN 2.
READ TABLE it_vttp WITH KEY vbeln = it_vepo-vbeln
laufk = '3'
INTO w_vttp BINARY SEARCH.
WHEN 3. "REVISIT
ENDCASE.
MOVE w_vttp-tknum TO t_data_tab-tknum.
MB01 - END
End of changes by ANV SR#11523
select handling unit info using vepo entry
CLEAR w_vekp.
IF t_vekp[] IS INITIAL.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = it_vepo-venum.
ELSE.
READ TABLE t_vekp WITH KEY venum = it_vepo-venum
INTO w_vekp BINARY SEARCH. "SUM
IF sy-subrc NE 0.
SELECT SINGLE * FROM vekp INTO w_vekp
WHERE venum = t_vepo-venum.
ENDIF.
ENDIF.
MOVE-CORRESPONDING w_vekp TO t_data_tab.
*{ INSERT UKMK900355 2
WM status for HU "AS03
SELECT SINGLE * FROM zhu_to_link WHERE lgnum EQ w_vekp-lgnum"AS03
AND exidv EQ w_vekp-exidv."AS03
IF sy-subrc EQ 0. "AS03
IF zhu_to_link-zpick_comp EQ space. "AS03
t_data_tab-lvsta = 'B'. "AS03
ELSE. "AS03
t_data_tab-lvsta = 'C'. "AS03
ENDIF. "AS03
ENDIF. "AS03
*} INSERT
select pallet / van load information "Jvdm01-
SELECT SINGLE zpallet_no zcount_check FROM zpallettr "Jvdm01-
INTO (t_data_tab-zpallet_no, "Jvdm01-
t_data_tab-zcount_check) "Jvdm01-
WHERE exidv EQ w_vekp-exidv. "Jvdm01-
PERFORM read_pallet. "MB01+
SELECT SINGLE zpallet_no zcount_check zdep_point "Jvdm01+
FROM zpallettr "Jvdm01+
INTO (t_data_tab-zpallet_no, "Jvdm01+
t_data_tab-zcount_check, "Jvdm01+
t_data_tab-zdep_point) "Jvdm01+
WHERE exidv EQ w_vekp-exidv. "Jvdm01+
WHERE exidv EQ w_vekp-exidv "MB -
Priority High - Need Logic in Hierarchical Report Urgent
Hi all,
i want the solution to build a form looks like hierarchical tree structure of employees, like person-supervisor relationship shown in a tree format and tree must looks like horizontal.
Please provide me any solution in same and reply as soon as possible.
Thanks
Amit GargMost Manager Self Service pages show supervisor or position hierarchy relationships in a 'hGrid' - a basic graphical representation. Beyond that, there is no standard Oracle HRMS functionality to show this any more graphically.
There are, however, a myriad of Oracle partners who provide solutions for more graphical hierarchies. You could try going to solutions.oracle.com, hit 'Search by Solution' and try searching for 'Org Chart'. -
Hierarchical Trees-----------Urgent
Hi All,
Can anyone tell me that while creating a RG for the Trees is it possible to join more then 2 tables.....
Thanks In advancePlease,
Try to keep the word "urgent" out of this forum, that is not a commercial site and is handled by people who just want to help the community without any "contract" obligation.
Francois -
Compiling error in Hierarchical Tree !!!!! Urgent attention!!!
I have made the Hierarchical Tree as described in the resuable demo help as is but when ever i try to compile the form i gets error on the navigator."anything!". I guess the forms are not able to find the navigator package. I have attached the navigator.pll. I think there is nothing mroe to attach to a form
Till now i have searched every documentation on the net and the files ships wiht DEV 6.0.5.2. But not ablet o find any thing regarding the installation of navigator package :( Is there any one can tell me how u remover the compiling error from the form which is dur to the navigator package!!!!
nullIf you are using DEV 6.0.5.2 you should use the FTREE built-in package. Look under the Built-In package node. The Navigator.pll was a demo used in Forms4.5 before there was a hierarchial tree item type.
Thanks,
Candace Stover
Forms Product Management -
*** URGENT *** Hierarchical Tree *** URGENT ***
Hi,
following situation:
I have a tree item (ht) in a block TB_FRM_NAME within a help form. This tree is filled with the Module Names within the entire application.
I fill this in the WNFI:
Fpr_Fill_Tree_Item
( 'TB_FRM_NAME.HT' -- pi_tree_item_name
, 'rgp_fwe' -- pi_record_group_name
, 'SELECT b_fu_id , ' -- pi_sql_statement
||'level , '
||'bemerkung, '
||' NULL, '
||' NULL '
||'FROM b_funk '
||'ORDER BY bemerkung
The Content of the forms-procedure is:
PROCEDURE Fpr_Fill_Tree_Item
-- In-Parameter
( pi_tree_item_name IN VARCHAR2
, pi_record_group_name IN VARCHAR2
, pi_sql_statement IN VARCHAR2
) IS
-- Variablendeklaration
v_tree_item Item; -- für das Baumverzeichnis
v_rgp_id RecordGroup;
BEGIN
-- Initialisierung der Variable, Itemname holen
v_tree_item := Find_Item (pi_tree_item_name);
v_rgp_id := Find_Group (pi_record_group_name);
IF NOT Id_Null (v_rgp_id) THEN
-- Record Group existiert bereits, also löschen
Delete_Group (pi_record_group_name);
END IF;
-- SQL Statement für die Record Group (Bedeutungen)
-- 1. Element Initial State
-- 2. Element Depth
-- 3. Element Label
-- 4. Element Icon
-- 5. Element Data -- when I enter Column name here
-- filling the tree doesn't work!
v_rgp_id := Create_Group_From_Query
( pi_record_group_name
, pi_sql_statement
-- Wenn die Record Group erstellt werden kann, ...
IF Populate_Group (v_rgp_id) = 0 THEN -- Fehlerlos
-- Record Group mit Tree verknüpfen
Ftree.Set_Tree_Property
( v_tree_item
, Ftree.Record_Group
, pi_record_group_name
END IF;
END;
After filling I want to add the names of the tab_canvas pages, when the user clicks one of the Modules in the application.
To test this I added following code in the WTNS Trigger:
-- Hier muss die nächste Ebene des Baumverzeichnisses gefüllt werden
DECLARE
v_node Ftree.Node;
v_tree_id Item;
v_tree_level NUMBER;
v_tree_label VARCHAR2 (30);
v_tree_value VARCHAR2 (30);
BEGIN
v_tree_id := Find_Item ('TB_FRM_NAME.HT');
v_tree_value := Ftree.Get_Tree_Node_Property
( v_tree_id
, :SYSTEM.TRIGGER_NODE
, Ftree.Node_Value
v_tree_label := Ftree.Get_Tree_node_Property
( v_Tree_id
, :SYSTEM.TRIGGER_NODE
, Ftree.Node_Label
v_tree_level := Ftree.Get_Tree_node_Property
( v_Tree_id
, :SYSTEM.TRIGGER_NODE
, Ftree.Node_Depth
IF v_tree_level = 1 THEN
v_node := Ftree.Add_Tree_Node
( v_tree_id
, :SYSTEM.TRIGGER_NODE
, Ftree.Sibling_offset
, Ftree.Next_Node
, Ftree.EXPANDED_NODE
, 'M'
, NULL
, 'M'
v_node := Ftree.Add_Tree_Node
( v_tree_id
, v_node
, Ftree.Parent_Offset
, 1
, Ftree.LEAF_NODE
, 'SUB'
, NULL
, 'SUB'
END IF;
END;
Result of this is, that the newly added node is placed at the first level of the tree. I don't want this! I would like to know what to do, so the newly added node is being shown at the second level.
Result
+-module1
|-module2
|-module3
Then the user clicks on module2 and the result is
+-module1
|-module2
--M
||-SELECT bemerkung FROM b_kat*
|-module3
Desired Result
+-module1
--module2
||-tab_page1
||-tab_page2
||-tab_page3
|-module3
*) Here I want the contents of the column to be displayed and NOT THE select statement.
Thank you for any helpHi,
I am shalauddin from bangladesh,
My e-mail address is [email protected]
mail me hear then I will give you a attachment articals on tree that will help u and solv your problem.
Regards,
shalauddin. -
Organization Management Interview Questions and Answers Extremely Urgent
Hi,
Please let me know Organization Management Interview Questions and Answers. MOST MOST URGENT
Please do not post Link or website name and detail response will be highly appreciated.
Very Respectfully,
Sameer.
SAP HR .Hi there,
Pl. find herewith the answers of the questions posted on the forum.
1. What are plan versions used for?
Ans : Plan versions are scenarios in which you can create organizational plans.
In the plan version which you have flagged as the active plan version, you create your current valid organizational plan. This is also the integration plan version which will be used if integration with Personnel Administration is active.
You use additional plan versions to create additional organizational plans as planning scenarios.
As a rule, a plan version contains one organizational structure, that is, one root organizational unit. It is, however, possible to create more than one root organizational unit, that is more than one organizational structure in a plan version.
For more information on creating plan versions, see the Implementation Guide (IMG), under Personnel Management  Global Settings in Personnel Management  Plan Version Maintenance.
2. What are the basic object types?
Ans. An organization object type has an attribute that refers to an object of the organization management (position, job, user, and so on). The organization object type is linked to a business object type.
Example
The business object type BUS1001 (material) has the organization object type T024L (laboratory) as the attribute that on the other hand has an object of the organization management as the attribute. Thus, a specific material is linked with particular employees using an assigned laboratory.
3. What is the difference between a job and a position?
Ans. Job is not a concrete, it is General holding various task to perform which is generic.(Eg: Manager, General Manager, Executive).
Positions are related to persons and Position is concrete and specific which are occupied by Persons. (Eg: Manager - HR, GM HR, Executive - HR).
4. What is the difference between an organizational unit and a work centre?
Ans. Work Centre : A work center is an organizational unit that represents a suitably-equipped zone where assigned operations can be performed. A zone is a physical location in a site dedicated to a specific function.
Organization Unit : Organizational object (object key O) used to form the basis of an organizational plan. Organizational units are functional units in an enterprise. According to how tasks are divided up within an enterprise, these can be departments, groups or project teams, for example.
Organizational units differ from other units in an enterprise such as personnel areas, company codes, business areas etc. These are used to depict structures (administration or accounting) in the corresponding components.
5. Where can you maintain relationships between objects?
Ans. Infotype 1001 that defines the Relationships between different objects.
There are many types of possible relationships between different objects. Each individual relationship is actually a subtype or category of the Relationships infotype.
Certain relationships can only be assigned to certain objects. That means that when you create relationship infotype records, you must select a relationship that is suitable for the two objects involved. For example, a relationship between two organizational units might not make any sense for a work center and a job.
6. What are the main areas of the Organization and Staffing user interfaces?
Ans. You use the user interface in the Organization and Staffing or Organization and Staffing (Workflow) view to create, display and edit organizational plans.
The user interface is divided into various areas, each of it which fulfills specific functions.
Search Area
Selection Area
Overview Area
Details Area
Together, the search area and the selection area make up the Object Manager.
7. What is Expert Mode used for?
Ans. interface is used to create Org structure. Using Infotypes we can create Objects in Expert mode and we have to use different transactions to create various types of objects. If the company needs to create a huge structure, we will use Simple maintenance, because it is user friendly that is it is easy to create a structure, the system automatically relationship between the objects.
8. Can you create cost centers in Expert Mode?
Ans. Probably not. You create cost center assignments to assign a cost center to an organizational unit, or position.
When you create a cost center assignment, the system creates a relationship record between the organizational unit or position and the cost center. (This is relationship A/B 011.) No assignment percentage record can be entered.
9. Can you assign people to jobs in Expert Mode?
10. Can you use the organizational structure to create a matrix organization?
Ans. By depicting your organizational units and the hierarchical or matrix relationships between them, you model the organizational structure of your enterprise.
This organizational structure is the basis for the creation of an organizational plan, as every position in your enterprise is assigned to an organizational unit. This defines the reporting structure.
11. In general structure maintenance, is it possible to represent the legal entity of organizational units?
12. What is the Object Infotype (1000) used for?
Ans. Infotype that determines the existence of an organizational object.
As soon as you have created an object using this infotype, you can determine additional object characteristics and relationships to other objects using other infotypes.
To create new objects you must:
Define a validity period for the object
Provide an abbreviation to represent the object
Provide a brief description of the object
The validity period you apply to the object automatically limits the validity of any infotype records you append to the object. The validity periods for appended infotype records cannot exceed that of the Object infotype.
The abbreviation assigned to an object in the system renders it easily identifiable. It is helpful to use easily recognizable abbreviations.
You can change abbreviations and descriptions at a later time by editing object infotype records. However, you cannot change an objects validity period in this manner. This must be done using the Delimit function.
You can also delete the objects you create. However, if you delete an object the system erases all record of the object from the database. You should only delete objects if they are not valid at all (for example, if you create an object accidentally)
13. What is the Relationships Infotype (1001) used for?
Ans. Infotype that defines the Relationships between different objects.
You indicate that a employee or user holds a position by creating a relationship infotype record between the position and the employee or user. Relationships between various organizational units form the organizational structure in your enterprise. You identify the tasks that the holder of a position must perform by creating relationship infotype records between individual tasks and a position.
Creating and editing relationship infotype records is an essential part of setting up information in the Organizational Management component. Without relationships, all you have are isolated pieces of information.
You must decide the types of relationship record you require for your organizational structure.
If you work in Infotype Maintenance, you must create relationship records manually. However, if you work in Simple Maintenance and Structural Graphics, the system creates certain relationships automatically.
14. Which status can Infotypes in the Organizational Management component have?
Ans. Once you have created the basic framework of your organizational plan in Simple Maintenance, you can create and maintain all infotypes allowed for individual objects in your organizational plan. These can be the basic object types of Organizational Management organizational unit, position, work center and task. You can also maintain object types, which do not belong to Organizational Management.
15. What is an evaluation path?
Ans. An evaluation path describes a chain of relationships that exists between individual organizational objects in the organizational plan.
Evaluation paths are used in connection with the definition of roles and views.
The evaluation path O-S-P describes the relationship chain Organizational unit > Position > Employee.
Evaluation paths are used to select other objects from one particular organizational object. The system evaluates the organizational plan along the evaluation path.
Starting from an organizational unit, evaluation path O-S-P is used to establish all persons who belong to this organizational unit or subordinate organizational units via their positions.
16. What is Managers Desktop used for?
Ans. Manager's Desktop assists in the performance of administrative and organizational management tasks. In addition to functions in Personnel Management, Manager's Desktop also covers other application components like Controlling, where it supports manual planning or the information system for cost centers.
17. Is it possible to set up new evaluation paths in Customizing?
Ans. You can use the evaluation paths available or define your own. Before creating new evaluation paths, check the evaluation paths available as standard.
18. Which situations require new evaluation paths?
Ans. When using an evaluation path in a view, you should consider the following:
Define the evaluation path in such a manner that the relationship chain always starts from a user (object type US in Organizational Management) and ends at an organizational unit, a position or a user.
When defining the evaluation path, use the Skip indicator in order not to overload the result of the evaluation.
19. How do you set up integration between Personnel Administration and Organizational Management?
Ans. Integration between the Organizational Management and Personnel Administration components enables you to,
Use data from one component in the other
Keep data in the two components consistent
Basically its relationship between person and position.
Objects in the integration plan version in the Organizational Management component must also be contained in the following Personnel Administration tables:
Tables Objects
T528B and T528T Positions
T513S and T513 Jobs
T527X Organizational units
If integration is active and you create or delete these objects in Organizational Management transactions, the system also creates or deletes the corresponding entries automatically in the tables mentioned above. Entries that were created automatically are indicated by a "P". You cannot change or delete them manually. Entries you create manually cannot have the "P" indicator (the entry cannot be maintained manually).
You can transfer either the long or the short texts of Organizational Management objects to the Personnel Administration tables. You do this in the Implementation Guide under Organizational Management -> Integration -> Integration with Personnel Administration -> Set Up Integration with Personnel Administration. If you change these control entries at a later date, you must also change the relevant table texts. To do that you use the report RHINTE10 (Prepare Integration (OM with PA)).
When you activate integration for the first time, you must ensure that the Personnel Administration and the Organizational Management databases are consistent. To do this, you use the reports:
RHINTE00 (Adopt organizational assignment (PA to PD))
RHINTE10 (Prepare Integration (PD to PA))
RHINTE20 (Check Program Integration PA - PD)
RHINTE30 (Create Batch Input Folder for Infotype 0001)
The following table entries are also required:
PLOGI PRELI in Customizing for Organizational Management (under Set Up Integration with Personnel Administration). This entry defines the standard position number.
INTE in table T77FC
INTE_PS, INTE_OSP, INTEBACK, INTECHEK and INTEGRAT in Customizing under Global Settings ® Maintain Evaluation Paths.
These table entries are included in the SAP standard system. You must not change them.
Since integration enables you to create relationships between persons and positions (A/B 008), you may be required to include appropriate entries to control the validation of these relationships. You make the necessary settings for this check in Customizing under Global Settings ® Maintain Relationships.
Sincerely,
Devang Nandha
"Together, Transform Business Process by leveraging Information Technology to Grow and Excel in Business". -
Urgent : Making heirarchy report by fetching data froma single table
Hi,
I am making a report in which i hae to display the data like this:-
If there is a material and it contains batch and that batch furhter conatins sub-batches of it.
The problem is dat all the data which is to be displayed is from the table CHVW and i am not able to display the data in hierarchy by fetching it from a single table.
plzz guide me how to do dis as it is really urgent and points will be deinftely rewarded.
help me out.
reagrds,
ric.s
Edited by: ric .s on Apr 30, 2008 10:31 AMHi,
Check the sample Report.
REPORT z_alv_hierseq_list.
Program with FM REUSE_ALV_HIERSEQ_LIST_DISPLAY *
TYPE-POOLS: slis. " ALV Global types
CONSTANTS :
c_x VALUE 'X',
c_gt_vbap TYPE slis_tabname VALUE 'GT_VBAP',
c_gt_vbak TYPE slis_tabname VALUE 'GT_VBAK'.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_2 FOR FIELD p_expand. "#EC NEEDED
PARAMETERS p_expand AS CHECKBOX DEFAULT c_x.
SELECTION-SCREEN END OF LINE.
TYPES :
1st Table
BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln, " Sales document
kunnr TYPE vbak-kunnr, " Sold-to party
netwr TYPE vbak-netwr, " Net Value of the Sales Order
erdat TYPE vbak-erdat, " Creation date
waerk TYPE vbak-waerk, " SD document currency
expand TYPE xfeld,
END OF ty_vbak,
2nd Table
BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln, " Sales document
posnr TYPE vbap-posnr, " Sales document
matnr TYPE vbap-matnr, " Material number
arktx TYPE vbap-arktx, " Material description
netwr TYPE vbap-netwr, " Net Value of the Sales Order
waerk TYPE vbap-waerk, " SD document currency
END OF ty_vbap.
DATA :
1st Table
gt_vbak TYPE TABLE OF ty_vbak,
2nd Table
gt_vbap TYPE TABLE OF ty_vbap.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
v_2 = 'With ''EXPAND'' field'.
START-OF-SELECTION.
Read Sales Document: Header Data
SELECT vbeln kunnr netwr waerk erdat
FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
IF gt_vbak[] IS NOT INITIAL.
Read Sales Document: Item Data
SELECT vbeln posnr matnr arktx netwr waerk
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE gt_vbap
FOR ALL ENTRIES IN gt_vbak
WHERE vbeln = gt_vbak-vbeln.
ENDIF.
END-OF-SELECTION.
PERFORM f_display.
Form F_DISPLAY
FORM f_display.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-tabname = &1.
ls_fieldcat-fieldname = &2.
ls_fieldcat-ref_tabname = &3.
ls_fieldcat-cfieldname = &4. " Field with currency unit
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-tabname = &1.
ls_sort-fieldname = &2.
ls_sort-up = c_x.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
ls_keyinfo TYPE slis_keyinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv," Sort table
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
ls_layout-group_change_edit = c_x.
ls_layout-colwidth_optimize = c_x.
ls_layout-zebra = c_x.
ls_layout-detail_popup = c_x.
ls_layout-get_selinfos = c_x.
IF p_expand = c_x.
ls_layout-expand_fieldname = 'EXPAND'.
ENDIF.
Build field catalog and sort table
m_fieldcat c_gt_vbak 'VBELN' 'VBAK' ''.
m_fieldcat c_gt_vbak 'KUNNR' 'VBAK' ''.
m_fieldcat c_gt_vbak 'NETWR' 'VBAK' 'WAERK'.
m_fieldcat c_gt_vbak 'WAERK' 'VBAK' ''.
m_fieldcat c_gt_vbak 'ERDAT' 'VBAK' ''.
m_fieldcat c_gt_vbap 'POSNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'MATNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'ARKTX' 'VBAP' ''.
m_fieldcat c_gt_vbap 'NETWR' 'VBAP' 'WAERK'.
m_fieldcat c_gt_vbap 'WAERK' 'VBAP' ''.
m_sort c_gt_vbak 'KUNNR'.
m_sort c_gt_vbap 'NETWR'.
ls_keyinfo-header01 = 'VBELN'.
ls_keyinfo-item01 = 'VBELN'.
ls_keyinfo-item02 = 'POSNR'.
Dipslay Hierarchical list
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
i_tabname_header = c_gt_vbak
i_tabname_item = c_gt_vbap
is_keyinfo = ls_keyinfo
i_save = 'A'
TABLES
t_outtab_header = gt_vbak
t_outtab_item = gt_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
Form USER_COMMAND *
FORM user_command USING i_ucomm TYPE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
DATA ls_vbak TYPE ty_vbak.
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN c_gt_vbap.
WHEN c_gt_vbak.
READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
END OF PROGRAM Z_ALV_HIERSEQ_LIST ******************
Regards,
Raj.
Maybe you are looking for
-
Essbase 11.1.2 dimension build slow
Hi All, I wonder if anyone has had similar problems or ideas of how to solve the problem I have. We've recently migrated to Essbase 11.1.2 running on some big SPARC 64 bit servers and everything is going well. We have a problem with dimension builds
-
INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. in transaction PBWW
Well while running a transaction PBWW when we click on create button it opens the word document with the text in it but suddenly the text is gone and it is showing a error which is INTERNAL ERROR IN SAP OLE DOCUMENT CONTAINER CONTROL. how can it be r
-
Logical Expression (Rel Operators)
Hi, Can any Please provide the more Detailed information and Example Programs on Logical Expressions Operators( CO, CA, CN ,NA .... ) Regards,
-
HT1349 The serial number on my apple protection plan is not recognised
Serial number on product apple protection plan not letting us register
-
Recording quality problem..can anyone help?
I have found Audition to be a wonderful tool for my audio restoration work, and so it was natural for me to use it when I started recording my own music. I write 2-4 songs a month, andI have been struggling for years to perfect my guitar tones. I ha