Highlight a field that have been changed

Hi,
I have to highlight all cells that have not been changed in a input-ready query in a webtemplate. But I don't know how to do this. Can anybody give me a hint?

Hi.
I have no ready solution with jvascript - it was only an idea.
Take a look at [following document|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80220fed-0e6d-2b10-bbb9-f6af76dee0cc].
Here you can find very long javascript code when one of the functions (sapbi_rig_cp_highlight) does highlighting of selected cells.
I sure, if you are familiar with javascript, it is possible to take this function and modify as needed.
Regards.

Similar Messages

Getting all fields that have been changed.

hello there,
how can i get the name of the fields that have been changed, their value pre-change and their values post-change on specific a block?
The reason for this is, i have a new requirement for an existing form. The supervisor wants to see all fields and their respective values that
a regular user changes so he can approve the change.
thanks so much in advance.
gleisson silva

Write Databse trigger on base table
CREATE OR REPLACE TRIGGER
FOR EACH ROW
:NEW AS NEW
:OLD AS OLD
ON UPDATE OF column1...
BEGIN
INSERT INTO DUMMY VALUES(:column_name,:new_value,:old_value);
END;
row-level trigger with update option.
store Old values and new values in dummy table which is replicated to original table.

Is there any options to know what is the particular field that has been changed or updated in AR invoice?

Hi...
Is there any option to know what is the actual field that has been updated / changed in the AR Invoice document.
ADOC and ADO1 Contains the history of the updated documents .....
but i need what is the exact field that has been changed....?
Is there any option.....?

Hi Gopi,
Please check below links.
http://help.sap.com/saphelp_sbo882/helpdata/en/45/06b97f7d720487e10000000a155369/content.htm
Queries off the Change Log
Query for Change Log
In above links, You can Modify Query as per your requirement.
Hope this help
Regards::::
Atul Chakraborty

How can I count only text fields that have been used?

Hi,
I'm using Livecycle Designer for a dynamic form. I have a section of the form that contains field for the user to enter goals and then rate the goal. I'd like to count only the text fields with entries and then have the total number of rates divided by the number of text field entries.
Row 1 , column 1 -- Goal is to pick up 5 apples.   Row 1, column 2 - the rate given is 5
Row 2, column 1 - Goal is to pick up 5 pears. Row 1, column 2 - the rate given is 5
Two goals for a total rating of 10     --- 10 divided by 2 = 5
Is it possible to count only those fields that are populated?
Also, is it possible to create an error message if the user entered 5 goals but only rated 4 of them?

You could do a simple check for null and increase a counting variable if there's a value in the field. Here's a sample:
var goalCount = 0;
if (field1.rawValue != null){
     goalCount = goalCount + 1;
if (field2.rawValue != null){
     goalCount = goalCount + 1;
if (field3.rawValue... etc.
this.rawValue = totalPoints/goalCount;
where totalPoints is a sum of the values in the goal fields. This script is javascript and should be placed in the calculate event of the field showing your average score.

Can I print a PDF form that has fields that have been overfilled?

The form is set up as an evaluation and the field has been filled out past the viewable area so it turns into a scrollable field. I'd like to print so all of the text prints from each form field.

Not directly.
You could use the "Compile returned forms" to put the form data into Excel.
Or you could export the form to an FDF and them make a version of your form with larger field sizes and import the FDF.

Linear Correlation -- Keeps returning NaN for fields that have been operated on

Hello, I'm trying to do just a simple linear correlation study with my data set. I can run a Linear Correlation on the entire set and all the correlation coefficients generate just fine. When I operate on columns, though, the operated fields all return "NaN"
in the correlation matrix.
Eg. my columns look like A, B, C, X. The correlation matrix populates correctly when I just run the Linear Correlation on the un-filtered, un-operated dataset. When I do an Apply Math Operation (divide) to append two more columns, A/C and and B/C, it applies
the math operation just fine; I can see all the new percentages of C that each A & B feature represent. But the new columns A/C and B/C don't work in the correlation matrix. Everything shows up as NaN. I checked, and these features are all Numeric.
Any ideas? Thanks!

FIXED!
Just in case anybody else stumbles across this, the Custom Value to replace isn't "Infinity", it's "NaN".
Use Roope's solution but with different syntax:
You can use "Convert To Dataset" module to replace invalid values, by using following parameters (for example to reset infinity to 0):
Action: ReplaceValues
Replace: Custom
Custom Value: NaN
New Value: 0

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

Can a workflow e-mail notif. only show fields that have changed?

I'd like to send an e-mail to an end user whenever any field in a Solution has changed. The e-mail notification workflow for my Solution works and starts out like this:
(PRE('<ModifiedDate>') <> [<ModifiedDate>]) AND...
However, I run into max character limitation in the e-mail message body. (will look at ToChar next) What I tried to do was display the new and previous values for the fields. This worked till I reached the char limits. Even if I could key in all the lines of characters necessary for this, the mail recipient would have to carefully go through all the fields and compare them to see which one(s) has changed. This takes too much time for the end user to do.
Is there I way (using a single workflow) to display in an e-mail only the fields that have changed? I've looked through the posts and have not yet found an answer. Thanks.
Edited by: user11167975 on Jun 16, 2009 1:34 PM

You can resolve this by creating One workflow for each field or a small group of fields you want to track. Only thing is the user may receive more than one email reguarding the same Solution.

I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

I have sent invites to my photo stream but invitees are getting the message that the photo stream may have been changed or deleted - it hasn't. What do I do?

Have you tried here:
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams

There were no results for Hi there, I have been using gmail Id and that has been changed by someone into a hotmail apple id whenever I wanted to sign into my account. I am really really troubled a lot. I have also successfully created another apple ID and

I have been using gmail Id and that has been changed by someone into a hotmail apple id whenever I wanted to sign into my account. I am really really troubled a lot. I have also successfully created another apple ID and password after a lengthy process and tried to go and get downloads, I was asked for my apple id and again the same problem came back and I couldn't be able to use my new account and use apple downloads from iTunes , etc. please, help me as soon as possible. Yimenu

Apss are forever tied to the Apple ID under which they were originally purchased. If you forgot the password to your original Apple ID, you can retrive it here:
https://iforgot.apple.com

IPhone 4 MSG that settings have been changed (but not by me!)?!?

Twice I have awakened to a message on my iphone 4 that my settings have been changed. The first time this coincided with my Yahoo mail acct getting hacked, about 2wks ago. After that, I changed my Yahoo password and enabled Restrictions, but I got this MSG again today. Who or what is making changes, and how can I stop it? Thx!

I'm sorry, but I don't have that. Was waking up both times and msg disappears. "User settings" have been Reset is as close as i can get. No numerical code. Thank you.

Delete rows that have been dropped in a CDC flow

Post Author: sgsampey
CA Forum: Data Integration
A newbie question:
I have a source table called Events with (significant) fields that look like:
EventIDEventNameBeginDateEndDateDaysOfWeekModifyDate
These data ranges can be quite long, and there's an exception table if the Event isn't being held on a given day
ExceptionIDEventIDExceptionDate
I need to flatten this data into a target Event_Instance table of individual days:
EventInstIDMasterEventIDEventNameDateDayOfWeek
I'm going to populate the target by combining Event source (filtered by modify date to only grab updates and additions) with a SQL table that creates a range of days, join that with the exception table, and filter based on no match in the exception table. That part's easy.
The problem I'm having is what do do when an Exception is removed or updated (Events are never removed - just canceled). There's no ModifyDate to look at. I know I need to create a buffer table to track changes, but once I identify execptions (in a Query Transform) that have been added since the last ETL, I don't see how to remove those Event_Instances. The two only solutions I can come up with is to wipe the entire Event_Instance table and rebuild with every ETL, or to add an 'action' field to Event_Instance, updateit to 'D' for those rows that need to be removed and then execute a SQL command to delete those rows once done.. I know there must be a better, incremental way to do this. TIA!

Your Mobileme galleries should be listed in the library pane on the left. How about creating a new album in the main library and dragging the images from a gallery to the album. Then delete the gallery and recreate it from the album.

Displaying the rows that have been updated....

SQL> select * from spr;
EMP_NAME EMP_no age sex
hry 45353 42 M
spt 43436 34 M
pen 34533 21 M
aen 65475 33 M
SQL> select * from sprfac;
EMP_NAME EMP_no age sex Appraisal Extra_Time
hry 45353 N N
spt 43436 N N
pen 34533 N N
aen 65475 N N
I have a problem regarding updating the sprfac table.
What i need is to satisfy the following conditions and update the second table with values in the second table.
I need to upadate the second table when:
1. The emp_name and emp_no of first table matches with the second table and
2. The Appraisal field and extra_time field should be 'N' in the second table and
3. only if the values of age and sex are NULL.
Let me explain in detail.
My original table is sprfac. spr is Temporary Table.
I have some data in flat files and i have loaded all the data into a temporary table using sqlloader. Now i need to update the second table.
Originally the age and sex fields in the sprfac table are NULL. Once i update the age and sex fields in the sprfac table again if i do update it should not update the rows which have data in age and sex columns.
Suggest me how to update multiple columns simultaneously or send me the code for the update statement if possible.
NOTE: I have changed the tablenames and column names since i cannot keep the original tables here.
And i got the following reply........
update sprfac a
set (a.age, a.sex) = (select b.age, b.sex from spr b
where a.emp_name = b.emp_name
and a.emp_no = b.emp_no
and appraisal = 'N'
and extra_time = 'N')
where a.age is null
and a.sex is null;
Everything is working fine.
Is there any way to send the name and age fields which have been updated of sprfac to a file.
should i use cursors....
Send me the code if possible....
Thanks..........

You can try similar to this, if you have oracle 9i. In 8i merge does not work. In that case u have cursor.
merge into EMP e1
using akg_emp e2
on ( e2.empno = e1.empno AND e1.sal > 1000 AND <whatever condition on e1>)
when matched then
update set e1.sal = 100
when not matched then
insert ( empno, ename, job, mgr, hiredate, sal, comm, deptno )
values ( e2.empno, e2.ename, e2.job, e2.mgr, e2.hiredate, e2.sal, e2.comm,
e2.deptno )

When i hide some fields from the Editform using javascript, what will happen to the fields that hve been hidden

I am working on an EnterpriseWiki site collection, and when users edit the page properties as follow:-
then will get all the fields inside the EnterpriseWiki content type as follow:-
now i want to hide all the fields except the ; Title & Name, so i edit the EditForm and i add the following script:-
<script>
$('#formTbl tr').filter(function ()
return !$(".ms-standardheader", this).text().match(/Name|Title/i);
}).remove();
</script>
so currently when users edit the wiki page properties they can only edit the Name & Title, because the script hide the other fields.
My question is what will happen to the other values such as the page content, assign to , etc that have been hidden.. I test this and seems that when editing the name and title the other values will not get effected which is what i need, but not sure how
did SharePoint handle this, i was afraid that hiding the other columns will set their values as null or empty if the user save the editform with only the title and name inside it ? can anyone adivce on this ?

Hi John,
From your description, my understanding is that you are worried about the values of some fields
will been saved as empty if you hide them in EditForm.
If you hide some fields in EditForm, it means that you could not edit them. These fields’ values will not be changed after editing Title field or Name field. When you click Save button, they will be still the values before changing the Title field or Name
field.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
i found this very critical issue with hiding the fields from the edit form, now i wrote the following script inside the edit form , to hide all the fields except the Name
<script>
$(document).ready(function(){
$('#formTbl tr').filter(function () {
return !$(".ms-standardheader", this).text().match(/Name/i); }).hide();
$('#ctl00_ctl40_g_6c7d849e_da6b_4138_be9f_b99bde542065_ctl00_ctl02_ctl00_ctl04_c‌ tl00_WebPartMaintenancePageLink').hide(); });
</script>"
. and now if I submit the editform (which only contain the Name) all the html tables inside the wiki page content will be removed.

Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
Does that work?

Highlight a field that have been changed

Similar Messages

Maybe you are looking for