Hints why all Update Routines are coming with 0.00. Even the simple ones?
Hi,
any hints why about 5 update routines that I have written are coming with 0.00 or blanks.
Even very simple ones such as the one for MyCclQTY in the cube, which has the only line in the update routine between ODS and Cube:
RESULT = SOURCE_FIELDS-QTY.
shows in the cube output as blanks while QTY has data:
e.g. of Cube Output:
QTY-Field2-MyCclQTY----MyCalField2
300--125--BLANK--
0.00
600--42.9-BLANK--
0.00
Basically all my routines, e.g. MyCclQTY, MyCalField2
are not showing values while the direct mappings show the correct data.
In the above simple case, with the routine shown above, I expected to see 300 and 600 for MyCclQTY but they come out blank.
Any hints as to what may be wrong?
Thanks
<Font Face="Tahoma" Color="Blue">
Dear Friend,
Can you please try
RESULT = COMM_STRUCTURE-Qty.
Also please check that you have assigned correct Unit of Measure in the field "Unit of Routine".
Hope it helps.
Regards,
Abhijit
</Font>
Edited by: Siegfried Szameitat on Nov 3, 2008 12:23 PM
deleted request for points. it is against the rules.
Similar Messages
-
Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.
Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.
-
HT201068 why all videos from Chinese websites cannot be opened after the update??
why all videos from Chinese websites cannot be opened after the Remote Desktop Client Update 3.8.2 v1.1??
That's not a thing that can happen. Your problem with videos is unrelated to the Remote Desktop Client Update 3.8.2 v1.1.
There were several OS updates recently as well, which could have affected video playback though.
What application do you use to play the videos?
Are the videos streaming from the internet or are they downloaded first and then played?
what format are the videos? what file extension? -
I used my existing apple ID when I purchased a second iPhone for my business.. Now all my texts are coming to both phones.. Is there a way to create a new apple account for my business phone and if so.. How do I delete one and add another?
Yes, you can have two separate Apple IDs, and it's pretty easy to set this up. Go into Settings > iTunes & App Store on your business phone. You should see your current Apple ID. Tap on it, then tap on sign out. You can then create a new Apple ID, using a different email address and password than those associated with the Apple ID on your other phone. Log back in using this new information, and you shouldn't get the texts that come to your other phone.
Hope this helped! -
How to identify transfer and update routines are applied to my ods/ cubes?
hi all,
how to identify transfer nor update routines are been applied to my ods/ cube?
regds
hariYou need to go through the update Rule and Transfer Rule mapping and if you see any routine then there is a routine. Only manual process and also that is not too bad to go through them.
thanks.
Wond -
MENU's are coming with the scroll bar
Hi,
I have a problem like this, I am migrating one menu file from a forms6i to 10G after that i tried to put that menu in the form then i found that the menus are coming with the scroll bar is there any parameter so that i can set that to false so i can see all the menus at one time.
Thanks in advance.
Saravanan.Kbelow is my code.
Display will have some graphics, the mouse click on the part of the graphics will produce different values in the table. class DatabaseDataDisplay has the JTable who display the values.
Display.addMouseListener(new MouseAdapter()
{ public void mousePressed(MouseEvent evt)
//get the location of the mouse
int x = evt.getX();
int y = evt.getY();
current = find(x, y);
if(current!=-1)
DatabaseDataDisplay D_Display=new DatabaseDataDisplay(Table_Name, current);
//remove the old panel
WholePanel.remove(scrollPane5);
//add the new DataPanel
JScrollPane scrollPane5 = new JScrollPane(D_Display,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
WholePanel.add(scrollPane5, new GridBagConstraints(0, 1, 1, 1, 1.0, 1.0,GridBagConstraints.CENTER, GridBagConstraints.BOTH, new Insets(0, 2, 0, 2), 659, 5));
/*if I put a repaint() here, the value on the table will always the values of the first time values when I click the mouse*/
WholePanel.validate(); -
I have an iPhone and iPad. I would like to get my husband an iPhone. Are we able to sync all devices and share info with both iPhones and the iPad, using a single email address?
Thanks for that. He is one of the last holdouts in IT so an email address for him would just mean I have 2 to check so that is what I am trying to avoid as we move into retirement:)
-
All my contacts are stored with country code for eg +233 244 123456. Contact names do not appear during incoming calls.
Please helphttp://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0
-
There is no Europe/Minsk timezone in iCloud calendar interface. All scheduled events are displayed with 1 hour error.
Is there any workaround?Hello again, Kirik17.
The concept still holds true. When clicking to select your time zone, you will need to select another city within your same Time Zone so that that one becomes your default.
If you are still unable to select your Time Zone, you may find more information by using another one of Apple's Support Resources at: https://getsupport.apple.com/GetproductgroupList.action.
Cheers,
Pedro. -
I don't know why all these charges are occurring! Can you please tell me what is costing me so much money?
iTunes Store & Mac App Store: Seeing your purchase history and ...
-
the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
All my incoming calls are coming up as unknown, even though they are not blocked?
All my incoming calls are coming up as unknown, even though they are not blocked? Any help much appreciated!
We didnt Still happens to some numbers!
-
Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
Thanks in AdvanceHi Hunt,
Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
what do you think ????
Peter -
Upgraded to 5.0, then 5.0.1. In the process the various calendar "types" disappeared, but at least all entries showed in Ical, with entries made after the upgrade showing pinkish/red. Yesterday all formerly made entries, both old and in the future, disappeared, only recently made ones in pink/red are shown. any tips?
I did switch off and on, did a sync with itunes, etc, but no luck.RIM doesn't push the upgrades -- your service provider does so, once they have certified and approved the operating system upgrade for their devices.
But, .973 does work on the 9520 in the manner you wish it would, I've used it myself on that model.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have just purchased the new macbook pro 15" and see that it comes with 2 discs in the box, one being Mac OS X and the other being Applications Install DVD. Are these pre installed? or do I need to insert the discs and install them?
All has been installed. Those are there in case you need to do a reinstall. Unlike most Windows based hardware vendors these days. Apple still ships software you might need in case a drive fails. Even in the case of the new MacBook Air, Apple ships the software on a flash drive.
Maybe you are looking for
-
What's wrong with this picture?Can't find where it
I can't find my picture It at what page? How do I delete it The file is here picture ID-CS6.zip_
-
YouTube widget not working in F12 preview
Hi all, I am having some issues with the YouTube widget. Where previously it has worked in the F12 preview, it now does not. It works after publishing, but this is frustrating because I need to do a lot of fine tuning. Any suggestions? Thanks Mike
-
Is there a BAPI for Payment Vouchers?
Hi, Is there a BAPI where I could get a List of Payment Voucher Details. This Payment Voucher contains Payments done against Vendor Invoices. The Parameters to the BAPI should be ideally "Company Code", "Fiscal Year" and "Transaction Number" this is
-
I'm trying to use a movie clip as a mask layer. The movie clip contains both lines and fills. The fill areas are working perfectly but the lines are appearing all weird and streaked (it's actually quite cool looking but not what I'm ideally after). T
-
Why won't podcasts sync to my iPod classic from my new MacBook?
I recently purchased a new MacBook Pro after my old PowerBook died. I was able to restore my music to the new Mac. However, even though I've checked the appropiate selection to sync my podcasts, it doesn't work. The old podcasts that were on the iP