Historical data steps

Hi,
How to loading the historical data steps.

Hi,
See the below steps for 0IC_C03, it tells about historical data, while filling teh setup tables it supprts the Date range, but in case of SD it will support the Doc no, so you need to follow the same as 0IC_C03 loads but in SD you need to give Docno while filliwng setup tables and then Init load after that fill setup tables with Historical loads and then do full updates in BW once you complete all tehn run V3 and run normal Delta.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
Thanks
Reddy

Similar Messages

Upload Sales Historical Data in R/3?

Hi Guys:
We are planning to use forecased based planning MRP Procedure ( MRP Type VV ) for Material Planning , we need historical sales data to execute the forecast.
can anybody tell me step by step how to upload 12 months historical data into SAP R/3, so that we can excute forecast based planning for a material?
Thanks
Sweth
Edited by: Csaba Szommer on May 12, 2011 9:57 AM

i need to to pull data in bw from r/3 for frieght rates
example for rate is from source to dest(in rows) and on the basis of this we have counditon types(in columns) which we will put in coloums and on the base of those cound type we will get cummulated value of master data rate.
like
source dest rate(based on coundition types)
now in r/3 some coundition type are changed to new ones or we can say merged to new ones, now my question for new one i can pull no problem but what i'll do for the historical master data like coundition type in 2006 are diff and 2007 is diff
but they mapped in each othe
thx
rubane

How to populate historical data in the appraisal

Hello,
I am working in Oracle PMS module. Our requirement is to display historical data of an employee in the next appraisal cycle.
Eg. If there are 3 appraisal cycle in a year. In the first appraisal manager will add objectives and competencies for an employee. lets say he added competency 1 ,competency 2,Objective 1 and Objective 2. after completion of the first cycle.
When manager initiates the second appraisal. in the objectives block 2 values (Objective 1 and Objective 2) should be auto populated. Same as in competency block 2 values (competency 1 and competency 2) should be auto populated.
Here manager can add more objectives or competencies.
Please suggest how this can be achived.
Thanks in advance,
sheetal

Hi Shunhui
Answers :-
If the required fields are not available in the Maintenance link, does it mean that I have to goto SE11 and create an append structure for the extract structure MC02M_0ITM which belongs to the datasource 2LIS_02_ITM?
Then I have to write codes in the user exit for transactional datasources in RSAP0001?
Ans : That's correct . Once you have done this on R/3 side, replicate the data source in BW side. Activate the transfer rules with appropriate mapping for 3 new fields and also adjust the update rules so that these 3 new fields are availble in Info providers.
Are you able to provide some information on the errors that might arise during transports with the delta being active in the production system? Will data be corrupted? Will I need to clear the delta queue before the transport goes over?
Ans : I assume that deltas are active in Production system . There is risk to your active delta into BW .
Before your R/3 transports reach Production system , you need to clear the delta queue that means bring the number of LUWs for 2LIS_02_ITM to zero . Also stop the delta collector job in R/3 for Application 02(purchasing). Make sure that there are no postings (transactions /users are locked) so that there will be change in purchsing base tables.
Then send your R/3 transport into Production system (Append structure , new fields + user exit code) .Replicate on BW side. Now send the BW transports to BW production system .
I had done this earlier for 2LIS_12_VCITM and had a step by step proceduew written with me ....will have to search for that document . Let me know your email ID , will try to send it once I find the document
Regards
Pradip
(when you edit the questions , there are option buttons with which you can assign points for that you need to do log on to SDN )

Reloading Historical Data into Cube: 0IC_C03...

Dear All,
I'm working on SAP BW 7.3 and I have five years of historical data being loaded into InfoCube: 0IC_C03 (Material Stocks/Movements (as of 3.0B)) and the deltas are also scheduled (DataSources: 2LIS_03_BF & 2LIS_03_UM) for the InfoCube. I have new business requirement to reload the entire historical data into InfoCube with addition of "Fiscal Quarter" and I do not have a DSO in the data flow. I know its a bit tricky InfoCube (Inventory Management) to work on and reloading the entire historical data can be challenging.
1. How to approach this task, what steps should I take?
2. Drop/Delete entire data from InfoCube and then delete Setup Tables and refill these and then run "Repair Full Load", is this they way?
3. What key points should I keep in mind, as different BO reports are already running and using this InfoCube?
4. Should I run "Repair Full Load" requests for all DataSources( 2LIS_03_BX &2LIS_03_BF & 2LIS_03_UM) ?
I will appreciate any input.
Many thanks!
Tariq Ashraf

Hi Tariq,
Unfortunately, you will need some downtime to execute a stock initialization in a live production system. Otherwise you cannot guarantee the data integrity. There are however certainly ways to minimize it. Please see SAP Note 753654 - How can downtime be reduced for setup table update. You can dramatically reduce the downtime to distinguish between closed and open periods. The closed periods can be updated retrospectively.
To make it more concrete, you could consider e.g. the periods prior to 2014 as "closed". You can then do the initialization starting from January 1, 2014. This will save you a lot of downtime. Closed periods can be uploaded retrospectively and do not require downtime.
Re. the marker update,please have a look at the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x, step 10, 11, 12 and 13 contain important information.
Re. the steps, it looks OK for me but please double check with the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x.
Please have a look at the following document for more background information around inventory management scenarios:
How to Handle Inventory Management Scenarios in BW (NW2004)
Last but not least, you might want to have a look at the following SAP Notes:
SAP Note 436393 - Performance improvement for filling the setup tables;
SAP Note 602260 - Procedure for reconstructing data for BW.
Best regards,
Sander

Exporting Historical Data from Lookout Version 3.8 to Excel

Can anyone please give step-by-step instructions on how to export historical data from Lookout Version 3.8 to an Excel Spreadsheet or CSV file?

Hi koehler, in the following link you can fiond a detailed step by step instructions
http://digital.ni.com/public.nsf/websearch/5915049F3BF93935862568C5005E9DF3?OpenDocument
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Copy historical data from one material to another

I have added a new material in the planning hierarchy and need to copy historical data from an existing material to this new material.
For achieving the same I carried out below steps:
In the forecasting view of the new material I added the existing material as reference material: consumption, also added the reference plant, validity period and multiplier.
But then too system is not copying the historical data of that material to the new material..I cannot see any data in MC94 or in the infostructure.
Please let me know where am I going wrong or if I am missing any setting.....
Thanks in advance.
Regards,
Sonal

Dear ,
System will not copy the Reference material consumption to new material consumption -Total Consuption tab .If you maintain those filed like
1.Reference material consumption
2.Ref.Plant Consumptuion
3.Date To
4.Multipler
5.Similar Period Indicator -M/W ( some time if you maintain the frist 4 option but not same period indicator , system will not consider the consumption ) .
Based on the above set up , when you execute the Forecast ( Indiviaully -MM02-Forcaste Tab or MP38 collectively or through SOP) , forcast programme will use the historical values of Refe.Material and project the new material\s forcasted demand as per your forecast period ( 2 months or 3 motnhs etc ) in the forecasting view .
System will not copy the Historical valu to total consumption tab of the new material ok .
If you need to copy the consumption of old material to new material , you have to use report RMDATIND, MVER_DI or BAPI_MATERIAL_MAINTAINDATA_RT .For more details please refer the OSS Note 200547 - Program: Direct input for consumption values
More over why do you need to copy when u have facility to have refence in Forecasting view !
Just chek the above points wht i have mentioned and execute forecast .Do not forget to keep same period indicaotor-M/W what ever .
Test a sample and procced .
Hope it is clear .
Regards
JH
Edited by: Jiaul Haque on Jun 5, 2010 10:12 AM

ORACLE BAM - Historical data

Hi,
Environment : Oracle Webcenter 11.1.1.7 Jdeveloper 11.1.1.7
Help : In BAM - If i want to see 6 months back data.. What i has to do with Oracle BAM server to achieve this requirements.
Thanks in advance,
Regards,
Karthigeyan.v

the aim of BAM is not "historical dashboards" BAM is: Business Activity Monitoring=Real-Time Monitoring.
If you need the historical data from BAM you can do frecuently "export".
The steps for do export:
http://docs.oracle.com/cd/E14571_01/integration.1111/e10224/bam_app_icommand.htm#BABCCDFF
Greetings,

Historical data from ACE20 load balancer modules

Hello,
I am trying to get some historical data from our ACE20 load balancer modules which are housed in a 6504, but cannot seem to find where to get this information from. I would like to get information such as memory used, CPU active connections, throughput, http requests etc over the past month, is there any way that I can do this? I am using ANM 2.0
Thanks

Hello,
Below are teh steps to load from DB connect.
Just go to Rsa1->modeling->source system->double click on the source system. On right habd side side right click on the topmost node.now it will take u to a screen, there u can give the table name (if u know) or just execute. it will display all the tables u have in Oracle. there double click on th eselected table and select the fields requared and now generate data source. now come back to RSA1->source system-> replicate the data source. now assign infosouce as usual.And create infopackage and start the load.
And this doesn't support delta process.
This document could help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Regards,
Dhanya

Business partner TAX number historical data

Hi!
One of tax number (RU3) is changed for business partner when address is changed.
I need historical date for tax numbers to be able to prind output docs with correct tax numbers on delivery date.
We use time dependent data for central data but000, bank data, address data but I have not found how to enter time period for tax numbers.
Any ideas?
Andrey Garshin.

Hi flyboy,
Follow this steps.
1. Go To Administration / Setup / Financials / Tax / Tax Code Determination / Tax Code Determination screen will apear / In Key Fields 1 select Business Partner / Leave the Key Fields 2 & Key Fields 3
2. Dubble Click on Priority fiels Serial No / Select Business Partner / Dubble Click on Serial Nuber Field / Here enter the Effective Date & Tax Code
I think this will help you
Thanks,
Srujal Patel

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

Historical Data with it's delta loading from PSA to ODS in 3.x model

Hello ,
I want to load the one year back historical data with it's delta's to ODS object in BW 3.x model .
So can you please give steps to load historical data from PSA table into ODS object(not from the source system).
Thnaks alot
Regards
BI Beginner

Hi
Run the full load IP from PSA to ODS with selections on 0CALDAY(give one year selections)
make this full load as repair full request.In display mode of IP, in menu bar click on scheduler --> select repair full --->check the option and click ok.
now execute the IP.
If you run like this, your init which has between your PSA and ODS will no get disturb.
Regards,
Venkatesh.

Upload of historical data from legacy system

Dear forum
We are running standard SOP with transaction MC88 in ECC6.0.
We are doing forecasting on material/plant level, based on historical data (we create the sales plan from transaction MC88).
Now, the problem is that we are introducing new products into SOP, but there is no historical data in SAP for those materials.
Is there any way we can import historical data into SAP from legacy system, so that SOP would take this data into account when calculating the forecast?
Note: we do not want to build anything in flexible planning. Just want to check whether or not it is possible to import historical values from a legacy system, to use as historical data in SAP.
Thanks in advance
Lars

Thanks,
But that will not help us.
Any ohter suggestions out there?

HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER

제품 : FIN_GL
작성날짜 : 2006-05-29
HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
=============================================================
PURPOSE
특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
Explanation
GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
3. Request Type 으로 Move 혹은 Merge 를 선택한다.
4. source-to-target account 를 위해 line number 를 입력한다.
5. LOV 에서 source Account 를 선택하여 입력한다.
모든 Account 는 enable 상태여야 한다.
6. target account 역시 LOV에서 선택하여 입력한다.
7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
8. 작업한 내용을 저장한다.
9. Move/Merge request 를 수행한다.
Example
N/A
Reference Documents
Note. 146050.1 - How to Transfer Historical Data from One Account to Another

Follow the directions here:
http://support.apple.com/kb/HT2109

How to get Historic Data in Oracle

Hi,
THe following query might be useful to generate the consecutive dates from given date to sysdate.
SELECT dt
FROM   ( SELECT to_date('02/19/1981','mm/dd/yyyy')+rownum-1 AS dt
       FROM    user_objects
WHERE TRUNC(dt)<=TRUNC(SYSDATE);NOw lets consider the basic scott.emp table
The above requirement can be acheived using this query as we may get only 14 records as there are only 14 records in scott.emp table
select ( to_date('02/19/1981','mm/dd/yyyy')+rownum-1) as dt
from scott.emp If we see the scott.emp table there are 2 reocrds with empno 7499,7521 with hiredates 20-feb-81 and 22-feb-81 respectively. on pulling the historic data from19-feb-81 to 04-mar-81 as there are only 14 records in the table we need to get the sum of sal or comm as it is along with those dates in the table.
Assuming there are more than one record for the same date for the dates mentioned above , i have used the following query but could not get the desired output.
Select To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1,
sum(Case When Sal>0 And Trunc(Hiredate)= (To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1)
Then (Sal)
Else 0 End ) As Hist_Sal,
sum(Case When Nvl(Comm,0)>= 0 And Trunc(Hiredate)= (To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1)
Then (Nvl(Comm,0))
Else 0 End) As hist_comm
From Scott.Emp
Group By To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1
order by 1; I have tried the other option also and I could get the desired output.THe query goes like this:
--Success Statement
Select To_Char(Rt.Business_Date , 'Day,Mon DD,yyyy') As Business_Date ,To_Date(Rt.Business_Date) As Hist_date,
( Select sum(sal)
From Scott.Emp Slm
Where Trunc (Hiredate) = Trunc(Rt.Business_Date)
) as hist_sal
FROM
(select ((TO_DATE('02/19/1981','mm/dd/yyyy')-1)+rnm) as business_date from (select rownum rnm from user_objects)) rt
Where
Trunc(Rt.Business_Date) Between To_Date('02/19/1981','mm/dd/yyyy') And To_Date('10/31/2012','mm/dd/yyyy')
order by Hist_date;But i want to get the historic dates/data to be genearted from scott.emp table insetead of using this logic *(select ((TO_DATE('02/19/1981','mm/dd/yyyy')-1)+rnm) as business_date from (select rownum rnm from user_objects)) rt* as written in Success Statement
As it would be helpful for my requirement ,else I need to write subqueries for all the cols i need as i have written in the above success statement.
please advise.
Regards,

sri wrote:
Hi,
THe following query might be useful to generate the consecutive dates from given date to sysdate.
SELECT dt
FROM   ( SELECT to_date('02/19/1981','mm/dd/yyyy')+rownum-1 AS dt
FROM    user_objects
WHERE TRUNC(dt)<=TRUNC(SYSDATE);
Unless you're using Oracle 8 (or older) then it's more efficient to say:
SELECT     start_dt + LEVEL - 1     AS dt
FROM     (
          SELECT     TO_DATE ('02/19/1981', 'MM/DD/YYYY')     AS start_dt
          ,     TRUNC (SYSDATE)                           AS end_dt
          FROM     dual
CONNECT BY LEVEL     <= 1 + (end_dt - start_dt)
;and it doesn't depend on how many rows happen to be in user_objects.
NOw lets consider the basic scott.emp table
The above requirement can be acheived using this query as we may get only 14 records as there are only 14 records in scott.emp table
select ( to_date('02/19/1981','mm/dd/yyyy')+rownum-1) as dt
from scott.emp If we see the scott.emp table there are 2 reocrds with empno 7499,7521 with hiredates 20-feb-81 and 22-feb-81 respectively. on pulling the historic data from19-feb-81 to 04-mar-81 as there are only 14 records in the table we need to get the sum of sal or comm as it is along with those dates in the table.
Assuming there are more than one record for the same date for the dates mentioned above , i have used the following query but could not get the desired output.
Select To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1,
sum(Case When Sal>0 And Trunc(Hiredate)= (To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1)
Then (Sal)
Else 0 End ) As Hist_Sal,
sum(Case When Nvl(Comm,0)>= 0 And Trunc(Hiredate)= (To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1)
Then (Nvl(Comm,0))
Else 0 End) As hist_comm
From Scott.Emp
Group By To_Date('02/19/1981','mm/dd/yyyy')+Rownum-1
order by 1; I have tried the other option also and I could get the desired output.THe query goes like this:
--Success Statement
Select To_Char(Rt.Business_Date , 'Day,Mon DD,yyyy') As Business_Date ,To_Date(Rt.Business_Date) As Hist_date,
( Select sum(sal)
From Scott.Emp Slm
Where Trunc (Hiredate) = Trunc(Rt.Business_Date)
) as hist_sal
FROM
(select ((TO_DATE('02/19/1981','mm/dd/yyyy')-1)+rnm) as business_date from (select rownum rnm from user_objects)) rt
Where
Trunc(Rt.Business_Date) Between To_Date('02/19/1981','mm/dd/yyyy') And To_Date('10/31/2012','mm/dd/yyyy')
order by Hist_date;But i want to get the historic dates/data to be genearted from scott.emp table insetead of using this logic *(select ((TO_DATE('02/19/1981','mm/dd/yyyy')-1)+rnm) as business_date from (select rownum rnm from user_objects)) rt* as written in Success Statement
As it would be helpful for my requirement ,else I need to write subqueries for all the cols i need as i have written in the above success statement.Sorry, I'm not sure what you're asking.
Do you want to know if there's a simpler and/or more efficient way to get the same results as the 2nd query you posted above?
Here's one way:
WITH      all_dates   AS
     SELECT     start_dt + LEVEL - 1     AS dt
     FROM     (
              SELECT     TO_DATE ('02/19/1981', 'MM/DD/YYYY')     AS start_dt
              ,             TO_DATE ('10/31/2012', 'MM/DD/YYYY')     AS end_dt
              FROM    dual
     CONNECT BY LEVEL     <= 1 + (end_dt - start_dt)
SELECT       TO_CHAR (a.dt, 'Day, Mon DD, YYYY')     AS business_date
,       SUM (e.sal)                               AS hist_sal
FROM              all_dates a
LEFT OUTER JOIN      scott.emp e ON e.hiredate = a.dt
GROUP BY a.dt
ORDER BY a.dt
;For testing purposes, it would be a lot clearer if you made the end_dt something like April 5, 1981 rather than October 31, 2012.
I hope this answers your question.
If not, post the results you want from the data in scott.emp, given some reasonable date range. (I suggest Nov. 16, 1981 through Jan. 24, 1982; that includes December 3, 1981 which has 2 rows with the same hiredate.)
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Historical data steps

Similar Messages

Maybe you are looking for