History --.System messages (Sm02)

Hi,
Any way to know the history of the system messages ? ..here is the seanario :
1.There was a System messge erroneously sent on SM02
2. Want to know how to get to the history of SM02

I hit on another problem --> the entries are zero. I think the table itself is not being logged !- this is not in PRD but in DEV
This is not a logging issue. It is quite likely that messages were deleted. At the time of creation, SM02 messages can be set to automatically delete at a certain time and date in the future. They can also be deleted manually before that pre-set date is reached. Deletion of messages (either manually or automatically) deletes it from archive and that's why you don't see them.
Run a simple test: In your sandbox, create a couple of test messages. One with auto deletion option with very short life-span and another one with a longer life-span. You will notice that you will see both messages in archive as long as you do not delete any manually BEFORE they are set to auto-delete. And once the auto-deletion time is reached, you will notice messages disappear from archive.

Similar Messages

System message (like SM02) in AS Java

Hi,
I want to know if there is a chance to display a system administrator message to all WebDynpro and portal users currently logged on and logging on next.
A similar functionality is available in transaction SM02 in a R/3 system.
Thanks in advance
Kilian

Hi Kilian
It is possible to send a System Message like SM02 in a Java System.
Do the steps as described below:
go to
http://<server-ip>:<port>/sld
login to it then
go to Administration
In Administration under Server
there is System Message....click on that
From there you define a system message that is shown to every user who logs on to the SLD.
Set the expire time also.
Regards
Sumit Jain
[reward with points if useful]

SM02 System Messages on Web Clearing Content

We have a custom application that recently moved from ITS to an ICF service with our ECC upgrade. When we post a system message, the next time a user posts to the web page the system message pops up. For example, when this his "Save" to commit their data. This is a good thing.
The problem is when the end user confirms the system message or closes it the web page refreshes and the end user looses all of their data.
Some info about the changes: We're using the SAP Web Dispatcher with HTTPS (ROUTER) as a pass through load balancer (should not be the problem here) and we moved from HTTP to HTTPS for all access so the content is now stateless (this is a big maybe since the user context is still in memory).
Is anyone away of how to handle ICM generated pop-ups without the application refreshing completely?

please check
Note 926124 - SM02: System messages are not displayed
i am not sure abt this note but u can also check
Note 1115177 - SM02: No system messages for new users
Hope this will help you ...
Reagards
dEE

SM02 - system messages

Hi all,
I am using ECC6.0 in our company.
Tcode .SM02 is used to display messages to all users. if i entered message in server user can login the application server a system message will be displayed.Next time same user entered a application server the message cannot be displayed.
<removed_by_moderator>
Regards,
S.Senthil Kumar
Edited by: Julius Bussche on Nov 19, 2008 8:50 AM

please check
Note 926124 - SM02: System messages are not displayed
i am not sure abt this note but u can also check
Note 1115177 - SM02: No system messages for new users
Hope this will help you ...
Reagards
dEE

Widget for SM02 system messages.

Hi Experts,
Can some one help me creating widget for system messages. The requirement is for creating widget which pops up a message when there is some new message created in the bw system. We have BW 3.5 system.
Currently we have a real time cube based on the background table of SM02 messages. We have made a report which displays the active system messages. This report is displayed in a widget. What we want is to hide this widget.
Whenever there is a change in SM02 there should be a JavaScript pop up for the user displaying the new message.
1. If there are no messages in SM02 then nothing needs to be done.
2. Once a message is created then a pop-up comes up.
3. One more message is created then pop-up comes up with both the messages.
4. One or both the messages deleted then nothing needs to be done.
I'll say thanks the sdn way...
Regards,
Sujit.

please check
Note 926124 - SM02: System messages are not displayed
i am not sure abt this note but u can also check
Note 1115177 - SM02: No system messages for new users
Hope this will help you ...
Reagards
dEE

How to pop up a system message for a specific user when She/He log on SAP

Hi Friends,
As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
Thanks in advance.
Joe

Below code can be used to send a pop up message to all users who are logged on to the
system.
DATA: MESSAGE(128) VALUE 'Test message'.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 10.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
ID 'TAB' FIELD USR_TABL-SYS.
LOOP AT USR_TABL.
CALL FUNCTION 'TH_POPUP'
EXPORTING
CLIENT = SY-MANDT
USER = USR_TABL-BNAME
MESSAGE = MESSAGE
EXCEPTIONS
USER_NOT_FOUND = 1.
ENDLOOP.
In the above code just pass the desired user ID instead of All user ID's
Edited by: harsh bhalla on Mar 26, 2009 2:14 PM

"Bookmarks and history system will not be functional" with corrupt files found by Avast and websites loading slow ONLY in Firefox

Firefox is the only browser that lets me connect with my microphone. I need to use this feature for an online class. Earlier this evening, the message prompting me to allow or deny the class website permission to use the microphone stopped appearing, and without it the recording won't pick up any sound and I can't record anything.
I tried exiting and restarting Firefox. I had some extensions in use at the time, in particular Session Manager. The allow/deny message still wouldn't appear, so I restarted my computer.
Now when I open Firefox I see the "The bookmarks and history system will not be functional" error message. In addition, the browser loads websites extremely slowly; it takes several minutes to load each page or for me to be able to click on anything (the URL bar, the menus, etc) My other browsers (Internet Explorer and Chrome) are running normally and load websites at a normal speed. I tried downloading the latest version of Firefox but it didn't fix anything. I also tried restarting the computer again but that didn't help either.
I ran my Avast software system check and it turned up that the following files under "C:\Users\(me)\AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default" are "corrupted and unreadable":
-cookies.sqlite-shm
-cookies.sqlite-wal
-localstore.rdf
-places.sqlite-shm
There was one more problem on the scan, but it probably isn't relevant: for the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "The system cannot find the path specified." When I attempted to follow the path indicated, one of the folders (I can't remember which) said something along the lines of "You can't access this folder, do you want to permanently allow access to this folder?" I said yes and was able to access the folder.
I have tried to add the Places Maintenance extension but the speed is too sluggish to download anything. Trying to access any of the menus results in the browser freezing for several minutes then unfreezing but with the menu still unopened. Therefore none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq) seem to work.
My questions are as follows:
-Is it possible to figure out what caused the problem in the first place?
-Is there a way for me to fix it without losing my bookmarks and history?
-How can I avoid this happening again in the future?

First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder. To quickly access this folder:
Help > Troubleshooting Information > "Show Folder" button
Next, keep this folder open, exit Firefox, and try moving the "corrupted and unreadable" files to a different folder. With the exception of localstore.rdf, which stores window positions, toolbar customizations, and other nonessential data, the other files appear to be session-specific files that hopefully are not critical. If you restart Firefox, does it behave more normally?
If not, try creating a fresh Firefox profile. It will have the Flash plugin, which is the control sites usually use to connects your camera and/or microphone, and other plugins, but otherwise will be a new setup. This article has the steps for starting up in the Profile Manager: [[Use the Profile Manager to create and remove Firefox profiles]].
If sites work normally in the new profile, you can import your bookmarks from your old profile, as well as copying over other files that don't seem to be causing the problem. Some trial and error might be required to determine that. This article has some tips: [[Recovering important data from an old profile]].
If the new profile is no better, you can exit Firefox and use the Profile Manager to switch back to your original profile.
Any improvement?

I have the "Bookmarks and history system will not be functional" problem and not FireFox will not open at all and my whole computer freezes if I try.

For a few weeks now, I've been getting the "Bookmarks and history system will not be functional..." message. When I clicked for more information, FireFox would freeze.
I found a solution about a new places database, but for the past few days I can't get FireFox to open at all. Then my whole system is frozen and I have to turn it off to get it going again, thus losing a lot of unsaved data.
How can I get FireFox back?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/The+bookmarks+and+history+system+will+not+be+functional

How can I see in EP7.0 a system message placed in ECC 6.0 ?

Hi everybody. I have one question. We have an EP 7.0 and one ECC 6.0 . In older versions 4.7 there is an IAC called sysmsg that you can use to show the system message you have placed in the ERP server through an iview in the portal. IT´s really usefull for the users in order to take care of notifications like "Travel Application is blocked for 2 hours" or whatever kind of messages you want to show to end users.
I´ve been reading ALL the threads I could found about this , but I can´t find the answer. I don´t want to send a broadcast message to all EP users, I only want to show the system messages that you put using SM02 in the ERP but in an iview in the portal.
Any ideas?
Thanks in advance and best regards.

Hi Jose
Please see the following Wiki's for some help with this
Brodcast messages to logged on users in Portal(Part1)
Brodcast messages to logged on users in Portal(Part2)
Best wishes
Stuart

How to Create System messages in BW

I want to create a System message in BW.
Please let me know.
Thanks
Prasanna

Hi Prasanna,
Use the T- Code SM02.
hope this helps

Send system message to specific users

Hi,
We have a requirement to send a system message to specific users that will be displayed immediately to those in the list who are logged on, or for those not currently logged on, the message should be displayed when they next log-in.
We do not want the message to go to their in-box or to be sent by email. We are looking for something similar to the system message produced by SM02.
Does anyone have any ideas or examples?
Thanks
Jan

Hi Mylene,
We have looked at TH_POPUP.
This works fine if the user is logged in but not if they are not. We need something that will pop up when they do log in.
Thanks for your help tho
Jan

How I send Instant system message to All online terminals

Hi gurus,
For sending the instant system message to online user, I am using SM02.
Problem is-
Some times one user login on two different PCs.
When I send the message to all users, message flash on only single PC in case of same user logon two different machine.
I would like to know , have any other options for send the instant message to all online terminals (PCs) which are connected to SAP server.
Regards,
Tapovardhan
Message was edited by: Tapovardhan Singh
Message was edited by: Tapovardhan Singh

Hi,
To send the message to just one user, you can "test" the function module directly from transaction se37.
If you want to send it to all logged on users, the following code could maybe be useful:
REPORT Z_MESSAGE_TO_ALL.
PARAMETERS: MESSAGE(128) default ' Error ! Please logoff now ! '.
DATA: OPCODE TYPE X VALUE 2.
DATA: BEGIN OF USR_TABL OCCURS 5.
       INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
                 ID 'TAB' FIELD USR_TABL-SYS.
LOOP AT USR_TABL.
   CALL FUNCTION 'TH_POPUP'
        EXPORTING
             CLIENT         = SY-MANDT
             USER           = USR_TABL-BNAME
             MESSAGE        = MESSAGE
           MESSAGE_LEN    = 0
           CUT_BLANKS     = ' '
        EXCEPTIONS
             USER_NOT_FOUND = 1
             OTHERS         = 2.
ENDLOOP.
Regards
Rolf

SRM 5 BBPSTART - System ID and System Messages issues

Hi all,
We just upgraded to SRM 5.0 from SRM 3.0
The shopping cart logon page(bbpstart) doesn't show System ID and also the system Messages also doesn't work on browser when we set message by sm02.
I already checked "System ID" and "System messages" from "Select Display" under System Logon Settings from bbpstart>Error Pages>Logon Errors>Configuration>System Logon Settings.
I searched over the net and can't find anything. I only found a notes for the System messages, but it was for the older release and SRM 5 already applied that note. So I don't know what else I can do.
Thanks for the itime.
Kev

Hello Thomas,
It is not possible to run a system landscape with 2 identical SID's. And even if you do get it running in some kind of freeky way the system would be very instable (how would you know a transport has gone to the right system?).
A system copy and a <SID> change is still possible. However, SAP recommends to do an export and an import of your database. Allthough this is the best and the least confusing way (and labour extensive), it is not really necessary.
If you do a backup/restore procedure with a <SID> change, lets say from PRD to DEV, you will end up with a system that has DEV as <SID> but your tablespaces will look like PSAP-PRD-620. The owner of the database will also be sapprd. This is no problem at all to run the system, it is only confusing.
I know it works, I've got it running. I've also got a sandbox running with user saptsc and database owner cbdamd and <SID> CBD.
Kind regards,
Pascal Ottens

Flash the system message every time when user login

Hi all,
My requirment is to diaplay the system message when user login for the maintenance purpose, In SM02 i created a message but it is not working for evary time login, It is displaying only one time, suppose i logoff and again loging message is displaying.
Please tell me how to display system message evary time when user login.
Thanks in Advance,
Thanks&Regards
RP

Hi,
To display system message every time when user login : use the
Enhancement SUSR0001
Short text User exit after logon to SAP System
You also get the Example Code here.
And the Documentation is :
Every dialog user passes through this function module after logon. Yo
can use this to execute individual customer checks here and send
messages to the user.
Do not log off the user and also try to avoid too many dialog boxes.
Regds
Suman

Get all system messages

Hello Everybody,
Well, I need to do an application to get all system messages and filter the messages I will need. The application run lotusscript codes from a Notes database, the application just do a database instance, choose the lotus agent and run it. What I need is get all those messages that will come from the lotus agent. I done a piece of the code to redirect all System messages for a file:
printStream = new PrintStream( new BufferedOutputStream( new FileOutputStream("OutFile.txt") ), true );
System.setOut( printStream );
System.setErr( printStream );The messages from lotus agent continue goes to console.By the way, this code can not get the messages from lotus agent, I guess with JMS I can intercept these message. My doubt is: Can I do it with JMS? If so, Could you advise me, please?

Don't bash csh!LOL!I'm glad some people like puns. Some of my friends do, some can't stand them!
I don't know ksh. Our target system uses it--makes me type a lot, because I don't know how to use ksh
history as well as I can use csh history. That's just setup though--must of it runs as a GUI.I don't like ksh either. Never had much luck with its history.
I use bash and zsh. Both have csh-like history, plus arrow key command recall.I don't think I've used either. I don't even think we have them on our system [from a quick check] (not sure I'ved heard of zsh before). I used to use tcsh (which had arrow key command recall) in college, but then some of my jobs didn't have it, so I learned csh history, and can do quite a lot. Confuses some people, but is really quite easy once you get the hang of it. The system administrator at my first job did all sorts of things with sed/awk/nawk/etc.--drove everyone nuts, because no one knew what he was doing. I can do basic sed, and can use awk/nawk if I read the man page.
Considering all the C programming I've done, you'd think I'd like the csh family more, but for some
reason I ended up gravitating toward bash and the more I used it, the more I didn't want to switch to csh.Yeah--I stuck with what I learned first, since it does the job. I don't do shell script programming much, so I don't need to know too many gory details of that. I can do the "foreach" on the command line. I learned vi well in college, so I later never felt like learning emacs (even a console version). So, I do everything in vi now. I push a few extra escape and append characters sometimes if I have to write an MS Word document, but I like vi for my code editing. I tried typing Dvorak for a while when my job was writing requirements in MS Word. It worked well on my split keyboard, but couldn't adjust to a flat keyboard I got stuck with for a while. And vi and Dvorak just don't mix...so I'm back to QWERTY.

History --.System messages (Sm02)

Similar Messages

Maybe you are looking for