Homogeneous system copy on the same hardware and OS

Hi!
When I installed our Q system I was given the wrong user, a local admin instead of a domain admin. Now we can not perform backup with our backup tool, HP dataprotector, because of authorization issues.
My solution is to "move" the system to the domain and to do that I need to do a Homogeneous system copy.
Our system is a 64-bit CRM 7.0 ABAP and J2EE on Windows 2008 with Oracle 10.2
I've read note 676468, 1238351 and the System Copy Guide - System Copy for SAP Systems Based on SAP NetWeaver 7.0 and from this I can see the following ways to do it
1. using SAPinst for export and import
2. using an offline backup
3. copy database files
What are your experiences with the different methods and what would you recommend?
rollo

> that seems to me a bit overdosed for just a user mismatch...
It is not "just" a user mismatch, the full environment is wrong (wrong user ID).
Windows stores users not as usernames but as UIDs (see HKEY\USERS in the registry). All permissions and ACLs and registry access permissions are using that UID - including the enviornmental settings, DCOM configurations etc.
Therefore I would go for system copy as stated in
Note 1233320 - Domain migration for SAP system
Technically it may work on the first look, problems may arise later. <sid>adm has to have some special permissions/policies that are not visible (like 'locking pages in memory' or 'act as part of the operating system' or 'run as batch') etc.
Markus

Similar Messages

Urgent Help Homogenous System copy

Hello!
We have SAP Portal 6.0 ABAP+JAVA WAS640, in Windows 2003 and Oracle
9.2.x.
We are updating our devellopment environment, doing a Homogeneous
System copy using the R3load copy method.
Creating the ABAP Database Instance in the target system, in step
Database Load, SAPINST ask a Migration Key...
Any suggestion ?
Thanks in advance.
Arnaldo Calaçda.

About migration key go to http://service.sap.com/migrationkey and also take it.
But usually it is required at heterogeneous system copy,you do not need to enter any migration key (for a homogeneous system copy). Describe your system more full and read the migration log, for exemple can be such as Note 747773
Award if helpful. Regards.

Homogeneous System copy - NW2004s

I am trying to perform a homogeneous system copy of NW2004s ECC6 system using sapinst.
Platform info:
OS - HPUX
DB - Oracle
I am using DB specific (oracle) method to restore an offline backup.
When I run the sapinst to import, I get past preliminary information screens and when I select "Homogeneous System Copy (backup/restore)", I am prompted for the location of LABEL.ASC for the migration.
The documentation in the guide "Homogeneous System Copy of NW2004s" is poor and does not address this issue.
I suspect there is a bug in sapinst.
Has anyone come across this issue before?
Thanks,
Sai

Steps for homogeneus copy :
1. Export of source system using sapinst ( R3load )
2. transfer the file over to target system
3. Do new installation of he system by using the transfered file as you export file.
I gues the menu in sapinst would be additional lifecycle task .

Homogeneous system copy OR Remote client copy

Dear all,
We have SAP ECC 6.0 system running on HP Unix and Oracle 10g. This is a production system.
We would like make an exact replica of this system into a test system for several tests.
To achieve this, I think there are two ways.
Procedure 1.
a. Install ECC 6.0 in similar platform and creat a new client.
b. Perform remote client copy from production system to new test system.
Procedure 2.
a. Perform homogeneous system copy.
Could you please tell me which procedure would be the best one? and also we would like to know SAP Guide on how to perform this procedure.
Thank you.
Regards,
Prashanth.R.G.

Hi Prashanth,
Perform homogeneous system copy is the best solution for your requirment.
For Procedure for homogeneous system copy look below link.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6945da7d-0c01-0010-1792-dd7b5d87235c
Regards,
Krishna Reddy

Problems with the Oracle Pre-Load actions in an homogeneous system copy

Hi,
I am trying to do a NW04 homogeneous system copy, and I am having troubles with the ABAP copy. (Oracle Pre-Load Actions step)
I am with the database specific procedure, so I am creating the new system until the sapinst asks me to bring an online-offline backup and the control file, then the sapinst tries to recover the database by himself, but he finds trouble:
Error: CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-01194: file 1 needs more recovery to be consistent Ora-01110: data file 1: 'oracle/XIE...'
If I try to do the recover manually I have to make the usual:
RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
CANCEL
ALTER DATABASE OPEN RESETLOGS;
If I follow the sapinst.log I find that the sapinst tries to recover the database but fails with the above message and:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
Yes, that's true, if I make it manually I have to open the database with the 'alter database open resetlogs';
the problem could be fixed modifying the run_control.sql statement that the SAPINST creates at the working directory, but no modification to that statement is possible because the SAPINST deletes and creates the statement IMMEDIATELY before executing it, so what can I do?
Many thanks
Mario

SOLVED
for your info, the run_control.sql is UNMODIFIABLE, but I could modify the CONTROL.SQL that he calls, so I recovered manually the Database, and the CONTROL.SQL was a simply CONNECT and then OPEN DATABASE, just like that, so I could continue with my installation, another point for us against the damned SAPINST !!!

Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username

How can i get the following done:
Exchange 2010 disconnect AD user from mailbox and reconnect the mailbox to a new copy of the same user with a different username?
i nmust do this for 16 users TODAY, SO PLEASE HELP ME OUT HERE.
Thanks in advance!!
kind regards,
Rene Veldman
System Administrator Teidem bv, The Netherlands.

Rene,
Why are you not changing the username of the existing account, instead of deleting the existing one and creating a new one?
If you truly need to delete and create new, you can save the GUID for the mailbox (Get-MailboxStatistics <mailbox alias> | Fl MailboxGuid), mail disable the existing account (Disable-Mailbox <mailbox alias>
will work), clean the mailbox database it was hosted on (Clean-MailboxDatabase
<database name>), then create your new account and recover the existing mailbox to that new account (Connect-Mailbox -Identity <Guid from before> -Database <Database name> -User <SAM account name of new account> -Alias
<what you wish to set the alias to>). In PowerShell, for all steps, you would do the following:
$MbxAlias = <mailbox alias>
$NewMbxAcct = <SAM Account Name for new account>
$NewMbxAlias = <new alias for mailbox>
$DomCtrl = (dir env:\LOGONSERVER).Value.Substring(2)
$MbxGuid = (Get-MailboxStatistics $MbxAlias -DomainController $DomCtrl).MailboxGuid
$MbxDb = (Get-Mailbox $MbxAlias -DomainController $DomCtrl).Database
Disable-Mailbox $MbxAlias
Clean-MailboxDatabase $MbxDb
Connect-Mailbox -Identity $MbxGuid -Database $MbxDb -User $NewMbxAcct -Alias $NewMbxAlias -DomainController $DomCtrl
You will need to supply the information in bold in the above commands, and you will need to create the new account before you run the above commands. I include direct use of a specific domain controller so you won't need to worry about replication.
If you are changing the account from one domain to another, this will not help, and you will need to wait for replication throughout the process, running the commands individually.

Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

How can I synch my ipod to a new computer without losing all my content, purchased and my old copied albums? My PC and backup died in the same week and now I am told I could lose all my content if I synch?

how can I synch my ipod to a new computer without losing all my content, purchased and my old copied albums?
My PC and backup died in the same week and now I am told I could lose all my content if I synch?
I have new purchases on my new laptop but too paranoid to synch the ipod incase I lose the thousands of tunes I copied over from my old collections.

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

After closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

after closing large documents (drawings) the window closes but the process runs still in the background. I open the next document, the same procedure and after dowing this several times the RAM is full the system becoms very slow. what can i do???

You can always shut it down manually via the Task Manager
(CtrlShiftEsc)...
On Mon, Sep 1, 2014 at 3:05 PM, frank koethen <[email protected]>

HT1539 I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?

I have tried to download a digital copy that came with a movie I purchased and I keep getting the an error about HD purchase vs. SD purchase. I push redeem again and it has the same message and I cant download the movie. What can I do?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Run the data copy and comments copy with the same key

I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

How do you drag-scale and copy at the same time?

I just want to drag-scale and copy at the same time like in previous versions of illustrator by holding the command key while dragging. Can someone help me find out how to do this with CC? I don't have time to re-learn basic things over again. What was wrong with it the way it was?

I guess you have to have the scale tool selected in the tool bar now in order to "drag-scale" and copy at the same time. Before you could just do it no matter what tool was selected in the tool bar. I liked it the way it was.
-Jo

Authority issues after homogeneous system copy - as/400 v5r1 - R/3 4.6C

Hello,
I am trying to complete a homogeneous system copy of an R/3 system.
The source system is PRD - the target system is TST. The hardware platforms are different (both iSeries) but the kernel/pdf/OS patch levels are all identical.
The process I have follow so far is this:
1. Preprocessing of the R3PRDDATA library.
2. SAVLIB of R3PRDDATA.
3. Delete old R3TSTDATA lib on target system using QSECOFR
4. Create new R3TSTDATA using SQLUTIL as TSTOFR (TSTOFR is my user for the target system)
5. CHGOBJOWN OBJ(R3TSTDATA) OBJTYPE(*LIB) NEWOWN(TSTOFR)
6. GRTOBJAUT OBJ(R3TSTDATA) OBJTYPE(LIB) USER(SAP02) AUT(CHANGE)
7. Detach existing Journal, create new journal receiver, create new journal ...
DLTJRN JRN(R3TSTDATA/QSQJRN)
DLTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001)
CRTJRNRCV JRNRCV(R3TSTJRN/QSQJRN0001) THRESHOLD(500000)
CHGOBJOWN OBJ(R3TSTJRN/QSQJRN0001) OBJTYPE(*JRNRCV) NEWOWN(R3OWNER)
CRTJRN JRN(R3TSTDATA/QSQJRN) JRNRCV(R3TSTJRN/QSQJRN0001) MNGRCV(SYSTEM) DLTRCV(NO)
CHGOBJOWN OBJ(R3TSTDATA/QSQJRN) OBJTYPE(*JRN) NEWOWN(R3OWNER)
8. RSTLIB from tape.
9. AS4FIXFILE on R3TSTDATA with
   DBLIB         R3TSTDATA
   CHGOWN   *NO
   ENDJRN      *YES
   STRJRN      *YES
   CHGFILE     *NO
10. install license key
So from this point the system will start without a problem. However whenever I try and write something to the database I get this type of error (via SM21 or ABAP dump) message:
Database error -551 at SEL access to table BTCOPTIONS
            Not authorized to object BTCOPTIONS in R3TSTDATA type *file
            Job=378721/TST02/WP02
Database error text........: "Not authorized to object SCPRACTR in R3TSTDATA
type *FILE. Job=379089/TST02/WP00"
I have also run GRTOBJAUT for the - TST02 user on the R3TSTDATA lib but still the same problem.
I'm certain the issue is related to the user on the 400 that is actually used by the work processes, and that user does not have the relevant rights to R3TSTDATA.
Any suggestions on how to resolve this problem will be humbly received.
Many thanks, Colin

Hi,
step 9 is wrong ;-(((
old:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *NO
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
correct:
9. AS4FIXFILE on R3TSTDATA with
DBLIB R3TSTDATA
CHGOWN *YES    <<<<<
ENDJRN *YES
STRJRN *YES
CHGFILE *NO
it NEEDS to run with QSECOFR !!!
=> it will work !
GRTOBJAUT on all objects is rubbish only !!! no real solution!!!
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Error during Homogenous System copy of ABAP+JAVA stack

Hi All,
I'm trying to do a homogeneous system copy of an XI system NW04s on Windows 2k3 and Oracle database to another windows 2k3 machine. SCS and Database went on fine but during CI installation on the target system I'm stuck at "Run ABAP Reports" phase.
I'm getting an error:
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
runRADDBDIF was executed with status ERROR
The ABAP stack is however up and when I login to 000 client using DDIC user and try to execute the report RADDBDIF, I get a runtime error RAISE_EXCEPTION with Exception condition "WRITE_FAILED" raised.
A RAISE statement in the program "SAPLSUGI" raised the exception condition "WRITE_FAILED".
If anyone has encountered similar problem, kindly help me.
Regards,
Sameer

Hi Juan,
I've already checked dev_disp and dev_ms but didn't find any errors. However, I got some errors in dev_w0. I'm pasting the same for your reference.
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon Jan 07 18:45:15 2008
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'F:\usr\sap\COP\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno      04
M sid        COP
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    111
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2148
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2148) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jan 07 18:45:16 2008
M DpShMCreate: sizeof(wp_adm)          10056     (1436)
M DpShMCreate: sizeof(tm_adm)          4232256     (21056)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1536)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05EC0040, size: 4883696)
M DpShMCreate: allocated sys_adm at 05EC0040
M DpShMCreate: allocated wp_adm at 05EC2090
M DpShMCreate: allocated tm_adm_list at 05EC47D8
M DpShMCreate: allocated tm_adm at 05EC4808
M DpShMCreate: allocated wp_ca_adm at 062CDC48
M DpShMCreate: allocated appc_ca_adm at 062D3A08
M DpShMCreate: allocated comm_adm at 062D5948
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06356808
M DpShMCreate: allocated gw_adm at 06356848
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06356878
M DpShMCreate: allocated wall_adm at 06356880
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host hydhtc24738
M calling db_connect ...
C Prepending F:\usr\sap\COP\DVEBMGS04\exe to Path.
C
C Mon Jan 07 18:45:18 2008
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
C Attaching to DB Server COP (con_hdl=0,svchp=064A2338,srvhp=064B3F34)
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now '/@COP' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=064A2338,usrhp=064FFA98)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@COP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0649D5C8   064A2B64   064A23EC
C Starting user session (con_hdl=0,svchp=064A2338,srvhp=064B3F34,usrhp=064FFA98)
C Now 'SAPSR3/<pwd>@COP' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance COP is running on HYDHTC24738 with ORACLE version 10.2.0.1.0 since JAN 07, 2008, 15:34:24
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080107 184516 HYDHTC24738
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jan 07 18:45:22 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0AB50040, size: 4400000)
M SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA          (addr: 0AF90040, size: 32768000)
M SHM_ROLL_ADM               (addr: 0CEE0040, size: 615040)
M SHM_PAGING_ADM          (addr: 0CF80040, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0D010040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0D0A0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 7, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10CD00C8, size: 30000000, end: 1296C448)
B dbtbxbuf: Buffer TABLP (addr: 129700C8, size: 10240000, end: 133340C8)
B dbexpbuf: Buffer EIBUF (addr: 133400D0, size: 4194304, end: 137400D0)
B dbexpbuf: Buffer ESM   (addr: 137500D0, size: 4194304, end: 13B500D0)
B dbexpbuf: Buffer CUA   (addr: 13B600D0, size: 3072000, end: 13E4E0D0)
B dbexpbuf: Buffer OTR   (addr: 13E500D0, size: 4194304, end: 142500D0)
M
M Mon Jan 07 18:45:23 2008
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jan 07 18:45:26 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1965E820
S
S Mon Jan 07 18:45:27 2008
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D8C00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D8C02B0
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4888kb, dir_size: 4856kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=57A1C000 leng=20955136 end=58E18000)
A >> Shm MMADM area (addr=57E91D98 leng=126176 end=57EB0A78)
A >> Shm MMDAT area (addr=57EB1000 leng=16150528 end=58E18000)
A RFC Destination> destination hydhtc24738_COP_04 host hydhtc24738 system COP systnr 4 (hydhtc24738_COP_04)
A RFC Options> H=hydhtc24738,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 7406 bytes at 0FFB0040
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\COP\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\COP\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Mon Jan 07 18:45:28 2008
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor =   5, max_in_blocking_factor      =   5,
B     min_blocking_factor =   5, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.111.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [14]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume hydhtc24738_COP_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >hydhtc24738_COP_04                      <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime    = -999
E EnqId.RandomNumber      = -999
E ReqOrd.TimeInSecs       = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId:          EnqTabCreaTime/RandomNumber    = 07.01.2008 18:45:27 1199711727 / 1692
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28 1199711728 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec    = 07.01.2008 18:45:28 1199711728 / 1
E Status:         STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <hydhtc24738_COP_04 >
L BtcSysStartRaise: End
S
S Mon Jan 07 18:45:36 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05E90040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05E907A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05E907E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05E907EC
S
S Mon Jan 07 18:45:44 2008
S server @>SSRV:hydhtc24738_COP_04@< appears or changes (state 1)
B
B Mon Jan 07 18:47:27 2008
B dbmyclu : info : my major identification is 3244494858, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is DCBD22E36FC346F1BF890002E339BE1E.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
A
A Mon Jan 07 18:47:55 2008
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Mon Jan 07 18:48:02 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Mon Jan 07 18:48:03 2008
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Mon Jan 07 18:48:04 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Jan 07 18:48:04 2008
A
A ABAP Program SAPLSUGI                                .
A Source LSUGIU08                                 Line 77.
A Error Code RAISE_EXCEPTION.
A Module $Id: //bas/700_REL/src/krn/runt/abfunc.c#10 $ SAP.
A Function ab_jfune Line 2561.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Exception condition "WRITE_FAILED" raised..
A
S
S Mon Jan 07 18:53:35 2008
S found spool memory service RSPO-ACTIONS at 1D8C9978
B
B Mon Jan 07 20:31:35 2008
B table logging switched off for all clients
Regards,
Sameer

Homogeneous system copy on the same hardware and OS

Similar Messages

Maybe you are looking for