Hooked up my external drive and having some major problems??
So I put my info from my pc onto my new external drive and then plugged it in to my mac (usb) It reads it just fine and I can pull info off it . . .
But, I cannot put anything on it (claims the drive is "read only") and I cannot delete anything off of it (I don't have the right permissions)
So what is the problem here?
I don't recall how i formatted the drive but i did do it with my PC. I am wondering if mac can't write to fat32 or ntfs or something like that.
Any thoughts are appreciated. I am using a hitachi drive in an ADS 835 enclosure.
By the way, where and how do you set "permissions"?
Kal
Sorry for being too late. You will not have any permission problems after reformat.
I hope it works now... I am using an external 60 GB VFAT drive without a problem with my ibook.
haris
Similar Messages
-
After many years of having no problems at all on my Macbook, I recently figured I should finally upgrade my OS. I did that about three weeks ago, updating to Snow Leopard (10.6.8). I used Time Machine at least once after the OS upgrade but now Time Machine no longer recognizes the external drive I have used for all these years to back up. The MacBook does not "see" it. (Disk Utility does however.) The computer then also stopped recognizing another La Cie back-up that I have and now... my iPhone cannot download photos? Yikes.
I have, of course, shut down numerous times, used different cables (that worked for some) and the two USB drives. I even used a firewire. Nothing worked. I also tried to "Repair disk" on Disk Utility. It didn't work either, giving me an error (that I didn't save, sorry).
I read many other discussions on the file format of the external drive and of course I'd be happy to reformat the external drives--however, it is obviously a tad nerve-wracking to reformat drives before having an accessible back-up. Suggestions? I do not remember what file format they have but am pretty sure it's not the Mac file system someone mentioned. The drives are a 2009 WD "My Passport Elite" and La Cie 2007 d2 Quadra,
In terms of other hardware available, we do have another MacBook Air but it has started rejecting both drives as well (without the Snow Leopard upgrade). We have an old Dell but it wouldn't have the disk space to help out much.
Any thoughts on the process involved would be welcome. Any ideas on the iPhone rejection would be helpful as well! It is a 30gig iPhone 4 that has 20 or so gigs free (not clear as iTunes says that there are abour 18 Gigs on the phone but 24 free gigs? I may be bad at math but that's 40 gigs...).
I am checking out iCloud but apparently there are only 55 gigs available?
Will be glad to hear any thoughts. Thanks!Good afternoon Lyssa,
Phew. First of all, thanks in advance...these blogs are always comforting help!
So, to answer your questions: For the age of the hard drive.Well, I added memory a couple of years ago (RAM and hard drive). Being a mom leads me to eat up a fair amount of gigs with photos of my kids and, in fact, I think I entirely replaced the original drive, so it is a couple years younger than 2008 since I did that in March 2010. If there is some way to verify that (whether or not I replaced the entire drive), I'm all ears. I have 311 Gigs free, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At the time that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried to repair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me this error: "Files can't becopied onto the backup disk because it appears to be 'read only'. You may needto repair or reformat the disk using Disk Utility. If the disk can't berepaired, you must use a different disk for backups. Open Time Machinepreferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't change anything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it is indeed present, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
So, in summary...
I can plug in the La Cie and it is functional on the MacBook, visible on Disk Utility but not visible in Finder. The WD drive is not visible and not functional. So we can think it is indeed the WD that is not working.... Also, the iphone photos did, in the end, get downloaded, so it is not something more general.
Causes...
I forgot to mention that there is a "lost+found" file on the WD which apparently points to a UNIX /OS issue?
Some kind of "insurance"?....
I'm curious about how people avoid this kind of issue. You just regularly replace back-up drives and hard drives before problems come up? Time Machine is great and saves many of us from disasters, however, knowing that your Time Machine back-ups are vulnerable makes the whole system insecure. No way to have alarms ring before the drive goes out?
As for ways ahead...
It seems that I ought to be able to copy off of the WD to the MacBook then erase it and reformat it and start over again. However, I haven’t been able to see its contents except on random occasions. If you have any ideas on how to copy the Time Machineback-ups from the WD, again, I'm all ears!
Good afternoon Lyssa,
Phew. First of all, thanks in advance...
So, to answer your questions:
For the age of the hard drive. Well, I added memory a coupleof years ago (RAM and hard drive). Being a mom leads me to eat up a fair amountof gigs with photos of my kids ….and, in fact, I think I entirely replaced theoriginal drive, so it is a couple years younger than 2008 since I did that inMarch 2010. If there is some way to verify that, I'm all ears. I have 311 Gigfree, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At thetime that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried torepair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible,reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me thiserror: "Files can't be copied onto the backup disk because it appearsto be 'read only'. You may need to repair or reformat the disk using DiskUtility. If the disk can't be repaired, you must use a different disk forbackups. Open Time Machine preferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't changeanything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it isindeed accessible, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
FYI...
So, in summary... I can plug in the La Cie and it is “functional” on theMacBook but not visible in Finder. The WD drive is not visible and notfunctional. So we can think it is indeed the WD that is not working.... ALSO,the iphone photos did, in the end get downloaded.
As for ways ahead…
It seems that I ought to be able to copy off of the WD tothe MacBook then erase it and reformat it and start over again. However, Ihaven’t been able to “see” its contents except on random occasions…
Any further thoughts are welcome! -
I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks
Hopefully you moved the entire iTunes Media (or iTunes Music) folder to a new path on your external drive. Copy your iTunes library folder out to the root of the external drive, e.g. X:\iTunes (where X: is your external drive), then move the media folder inside it. Hold down shift as you start iTUnes and keep holding untila asked to choose or create a library. Choose the library at X:\iTunes\iTunes Library.itl. Should all be good.
Failing that, download and run my FindTracks script and point it at the new location of your media folder.
tt2 -
I'm not very tech savvy but am trying my best to use Disc Utility to copy my hard drive to a brand new external drive and am having the error "Unable to create...(Cannot allocate memory)".
Last night no problems, woke this morning and it was freezing so I forced a restart and got the grey screen with the folder and question mark. Ran off to best buy to get an external drive... Please help! Thank you!I have done both. When I hold down the "C" key it pauses for a few seconds while the cd spins and then the flashing folder icon appears.
Could be you have the wrong cd/dvd. The mac will only boot a supported cd/dvd for your machine. The flashing question mark indicdates your machine could not find a valid os.
When I hold down the "option" key for the startup manager the cursor comes up and moves but the actually manager doesn't come up no matter how long I leave the laptop on.
Not sure. Could be your machine does not support the startup manager. You would think the machine would ignore the key.
Where did you get the dvd? What is the number on the DVD?
What machine do you have anyway?
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.
You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too. -
How do I download OS 10.6.7 to an external drive? For some reason I get an error message when I try to download directly to my MacBook Pro from Software Update or from the Apple Downloads site.
brandonfromcharlton wrote:
I just had this issue as well. A work around is to manually install all of the updates, one-by-one. This may take a while and be a pain, but after this it's freesailing for future updates. Not sure what the issue is but don't worry, that will fix it.
BF
Instead of downloading one by one simply download the 10.6.7 'combo' update from Apples support site, it contains all previous updates in one package. -
Taking the plunge - external drive and exclamation points
Okay...
I have cried for help on this forum before about the somewhat common problem of iTunes 7 having a strange relationship with music on my external drive. The drive in question is a Lacie 250 GB Firewire drive.
A few months ago, out of the blue, one day I opened iTunes to find a sea of exclamation points. Though all the music I had added after a particular date was there, most of the music I had added prior to that was tagged with the exclamation. When I'd try to play one of these songs, iTunes would say it could not be found, though I could manually locate it and things would work fine. I tried a few fixes recommended on this forum by well-meaning but misguided people that resulted in a few sets of duplicate playlists but no fix to the problem. Then, one day, out of the blue again...it started working fine.
I don't even recall having restarted the computer. iTunes had just fixed the problem somehow.
Well, now the problem is back, and I've dealt with it for about a month. But I'm not convinced that it will just go away this time. So, even if I destroy my painstakingly cultivated hundreds of playlists, ratings, play history and comprehensive information (artwork, composer, etc.), I am determined to fix this problem without manually locating over 10,000 songs.
I am posting my attempts here as a record that will hopefully help those struggling with this problem in the future. Though I would welcome any and all comments or questions, I have frankly come to expect very little assistance or even the willingness to assist from this forum (that is to say, I imagine my unresolved question will languish for awhile as a monologue until I either fix the problem or die).
The first thing I will do (after doing a final backup, of course) is to determine whether it makes a difference if an updated version of my iTunes library file and .xml are in the Music folder (on my hard drive) or in my Musica folder (on the external drive). The latest edition of the file is currently on the external drive.
So, here we go...
Grant
Dual 1GHz G4, 1G RAM, 80G HD Mac OS X (10.4.9) iPod (1st Gen), iPod Shuffle (1st Gen), iPod Mini, External HDWell, I've made quite a mess of things. So I have 14,000 songs. Most were added years ago. Looking at the date added in correlation with the exclamation points, it seems as though iTunes forgot the location of most of the songs added before 5/9/06. Mind you, iTunes worked fine (with the exception of doing this whole thing once before) until about a month ago. So, in May 2007, iTunes forgot most of what happened before 5/9/06.
(For reference purposes, the gap seems to exist between two songs I downloaded. "Help Me, Ronda" by the Beach Boys is the last song with an exclamation point in the date added list (see two exceptions below). "Proud Mary" by Ike & Tina Turner, on the other hand, is exclamation point free and only a couple of songs added after "Proud Mary" have exclamation points. They are:
Freedom, by Richie Havens, added 6/3/06.
Slow Free Bird, by Geesekey, added 12/17/06, a song I made in Garageband.
Now, don't let me give you the impression that there is a solid wall of exclamation points up to "Help Me, Rhonda." Maybe about every 10/20 songs, there is a song with no exclamation point that plays fine. Following Jase's lead before (his advice to another user), I have investigated some of these songs that work fine, but can't find any reason why these work and others don't (any difference in the iTunes Library.xml, files created with/without track number, etc.).
So, here's what happened in the past couple of days: I dragged my "iTunes Music" folder (located in my "Musica" folder on the external drive) into the iTunes source list). Most everything was duplicated, with the new songs playing just fine but lacking ratings and play history. Also, the new songs were not included on any playlists.
What I did next was poorly executed. I sorted iTunes by the Date Added and selected the first few thousand (roughly, A-J; seeing them according to the Date Added reveal that they weren't added in exactly a linear fashion). I hit the delete button and selected "Remove", but I then told iTunes to "Move to Trash." What I should have done, I imagine, is told iTunes to "Keep Files". So, my A-J songs are now deleted off the External Drive and gone (though I have backup DVDs generated by the iTunes "Back up to Disc" feature).
What should I do next? is the pressing question. Should I rip everything out and start from scratch with my backup discs? I guess the question I would have with that approach is this: if I restore from backup discs made three months ago, will I still have all my playlists, ratings and play history as they were when I made the backup? If that's the case, that'd be fine with me...I just want to make sure that's what will happen. Also, I have a backup of my iTunes Library file before I've done all this crazy stuff of the past few days, so if that enters into the equation, let me know.
Otherwise, let me address your comments, Jase.
Anyway, here's a question. Can you export your
playlists, even though they're made up of songs with
exclamation marks? If so, you could try exporting one
of them as an XML file. Then import it--you'll
probably wind up with duplicates (playlists, not
songs). Does the newly imported playlist play, or
does it still have the exclamation mark problem? I
wouldn't know what to expect, but it might be worth a
try.
My playlists themselves are all still the same as they were (though there are exclamation marks all over the place). From what I can tell, they look fine when exported to an .xml (the music folder seems to have the correct path). When I import it, it's the same deal: exclamation points at the same places.
If your playlists are exportable, you might want to
export them to XML files, just so you'll have those
little databases of them. Then, if worse came to
worse and you had to give up on your current Library
file and reload your Music folder into a new library,
at least there's a chance you could import your
playlists and not have to build them again from
scratch (assuming nothing has changed in terms of the
organization of your Music folder).
I'm not willing to export every playlist, because I have hundreds and it would just take too long. Is there a way to export all or a lot of playlists at once? Anyway, I figured that my playlist data was stored somehow in the iTunes Library file, so I felt I had a backup already. I could be wrong about this, though, as I really don't understand much about the iTunes Library file and .xml and the like.
Can you drag songs that have exclamation marks into a
playlist? Somehow, I doubt it. But if you can, you
could use new playlists to make a record of some
information that you might want to save if you had to
start all over again with a new Library.
Believe it or not, I can add songs with an exclamation point into playlists and they're added just fine (though, they still have the exclamation point). How this works is: I can't drag and drop them into a playlist. However, I can control-click and select "Add to Playlist" and it works. There's another mystery for you.
Have you looked at your iTunes Library.xml file --
specifically at the location information for
individual songs -- to see if the location
information exactly matches the information you see
in the Finder? I have found mismatches when
investigating some exclamation marked files. I didn't
know how that happened, and I didn't know what to
about it, but it was intriguing to see evidence of
some iTunes mischief.
Is the iTunes feature to start music file names with
the track number turned on? To my mind, fewer missing
song file problems occur when this is on.
Yes and yes. Based on what you told others, I have looked at the .xml of some of the problem songs and the working ones and could find no difference, but I didn't really know what I was supposed to be looking for. I also use the Add Track Number feature and always have.
If you still have the 28,000 songs in your Library
and want to go back to the 14,000, you could sort all
your songs by Date Added and delete the ones you
added on June 21. Or, if you saved a copy of your
iTunes Library file before you dragged your iTunes
Music folder into the library, you could just throw
out the more recent Library file and reinstitute the
back-up copy.
I probably should have done the latter (just restore the backup of the iTunes Library file). Oh well...
Some advice for future experiments. Try them with a
small sample if possible unless you're absolutely
sure they will work the way you want them to. For
example, drag one album in your Music folder into
iTunes rather than the whole Music folder.
This is a great idea. I wish I would have checked my sample more closely or done more tests before I plunged off the cliff.
Back up your iTunes Library file, as well as your
Music folder. (You might already do this.)
Check.
Those are a few things to think about. They probably
will not be helpful. Like I said, I don't think there
are clear answers to this problem. The best I can
wish for you is that iTunes will magically fix the
problem, like it did once before. Then, maybe there
are some preventive measures you can take.
Since iTunes did fix it once before, I would not
throw your current iTunes Library file away, no
matter what. If you decide to start a new library so
that you can actually listen to your music, rename
this Library file and keep it around, since it has a
lot of your metadata in it. You can try it every now
and then and see if iTunes spontaneously revives it.
Okay, I will post what I do next, provided that I don't hear any compelling advice and make my own decision (though I should be even more gun-shy after my recent blunders).
Grant -
Best setup for external drives and backup
I'm using Aperture to organize several thousand photos. I've gotten good advice her before about how to get started on this. I'm not a professional and I'm not an experienced user of Aperture, so don't assume a lot of knowledge when you answer. I'm wondering what the best way to set up the file storage would be. I use a MacBook Pro, so obviously that's out for storage, and financially, purchasing a more powerful desktop is out for the time being. I was thinking of purchasing a mirror drive system, like this: http://www.newertech.com/products/gmax.php
But then, there still remains the problem of backing up the photos in case of a fire or theft, etc. I have many of them on DVD, but not with all the metadata that I've added. Can I back the external drives up to a cloud-based storage system through the wireless on the MacBook?
Or, is the answer none of the above? What recommendations do you folks have for managing this?more:
Paula-
Mirror drives are very much less than ideal for images backup. Mirroring occurs in real-time, so errors, breaks, etc. simply get copied. With images work (unlike fanancial work, for instance) we do not need real-time backup we just need regular accurate backup. Just have 2-3 external drives and rotate them regularly, always having one drive off-site (could be in your car or whatever). Back up manually rather than automatically so that you can be reasonably certain that the backup is not backing up something that just broke.
I suggest the below workflow. Note that most important is that original images from the camera card are copied to two locations before reformatting the card and before importing into Aperture or any other images management application.
Original images never change, so I prefer to manually copy them to two locations asap after capture: one location is the computer drive and the other is an external backup HD that itself gets backed up off site regularly. That assures me that "the pic is in the can." Until two digital files exist on different media I do not consider the pic in the can.
Then reformat the card in-camera, not before.
The Masters then get imported into Aperture from the Mac internal drive by reference (i.e. "Storing Files: in their current location" on the Mac internal drive). After editing is complete (may take weeks or months), from within Aperture I relocate the referenced Masters to an external hard drive for long-term storage.
I do use Time Machine routinely on the MBP, but for the daily-volatile activities going of the MBP. I prefer not to have TM be my backup-of-originals protocol. Instead TM backs up the Mac internal drive on the TM schedule and I back up original images asap based on my shooting schedule. Also the TM drive is a different drive than the drives used for long-term original image files archiving.
TM does back up my Library because the Library lives on the Mac internal drive but I do not assume that TM works for Library backup. I back the Library up to Vaults (on the same drives I put archives of Masters on) independent of TM. IMO one should back up image files and back up Vaults manually after verifying that what is being backed up is not broken, because automatic backup will just back up a broken Library or whatever.
Note that Masters need only be backed up once (but to multiple backup locations) and that backup should happen immediately after copying to the hard drive from the camera card, before involving Aperture or any other images management app.
Sorry for the redundant verbosity above but some was copied from previous posts. Also, I reinforce what Léonie said about DVDs. DVDs are way too slow, unreliable, etc. Instead rotate multiple hard drives to achieve redundancy.
HTH
-Allen -
The mini mac is full and I want to be able to use the 2 tb drive as storage and time machine. How do I get the content onto the external drive and access it it and hoe does new content get downloaded and stored to the drive not the mac? Also can I have 1 drive playing storeage and back up or do I need a second? Basic questions I suspect but not to me!
1. Drag the library to the external drive, launch iTunes with the Option key held down, click on Choose Library, and point it there.
2. Get a second. Having the backups on the same drive as the original data won't help when that drive fails.
(66929) -
Can I back up an external drive and an airbook with a third drive
I would like to back up an external drive and an airbook with a third drive. This was the setup I used with my Imac. The third drive was linked to the external drive which was linked to the imac. I used time machine. Both the third drive and the external drive were visible on the desktop of the imac. Now I want to use this system to back up the airbook and the external drive, but the third drive doesn't appear on the airbook's desk top, in fact it is invisible and doesn't seem to be recognized in finder or anywhere else from the airbook. Is there some distinction that prevents the airbook from allowing this back up configuration, but that allowed the imac to work in this configuration.
Thanks,
DaviiiiiiidOf course, always that the external drive is formatted in “Mac OS Extended (Journaled)”. Apart from that, you shouldn't have any issue,
Then, open System Preferences > Time Machine > Options, and remove the external drive from excluded items. The next backup will include your external drive.
Note that you may not be able to back up the external drive if it's connected to your Time Capsule. If it doesn't work, connect the external drive to your computer -
I changed the format to an external drive and lost everything that was on it.
I changed the format on an external hard drive and lost everything that was on it. Is there a way to recover what was on it?
1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
2) Use one of the following methods to install FCE 3.5 into Mavericks:
a) Pacifist: http://www.charlessoft.com/
b) Jeremy Johnstone's Terminal method: http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function. FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well. -
Running Win7. I moved my entire Itunes library to an external drive to free up space on my laptop. Itunes recognized the change and all was well. That worked fine and I have synced several times from the laptop with the library on the external drive. Now the laptop is in the shop (sigh, not Itunes related a dead network card). I connected the external drive to my desktop, made sure my software was up to date. opened ITunes went to edit/preferences/advanced. Went to change Itunes media folder location and navigated to the proper folder on my external drive and clicked OK. None of the music, videos, etc, that are in that folder show up in iTunes on the desktop. Restarted ITunes, no help, reboot computer, no help. Have I done something wrong or left out a step. I could copy all the media onto the desktop individually and build new playlists but that seems like something that should not be needed? One of the reasons I moved my Itunes media folder to the external drive was so I could use the laptop for iTunes while travel and the desktop for iTunes while at home. Do I have to copy the entire folder to my desktop and take up space there? That would be counterproductive to using the external drive. I searched and saw a hint to hold down shift while starting ITunes but that did not change anything. Any help would be most appreciated!
Jim in WVThank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow? In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer. -
ITunes Media on external drive and moved to new PC laptop
Environment: Dell PC laptop, Window 7 32-bit, iTunes 12.1.1.4
I have all of my iTunes Media on an external hard-disk drive. I want to keep it on that drive. I have a new laptop and have connected the external drive to it. I have installed iTunes on the new laptop and in Advanced Preferences I have changed the iTunes Media folder location to E:\iTunes and I have checked the box "Keep iTunes Media Folder Organized." I have also checked the box "Copy files to iTunes media folder when adding to library."
When I open iTunes, the software does not seem to recognize the content in E:\iTunes. It does not recognize that I have already downloaded most of my purchased content (everything previously downloaded still has the little cloud icon in the bottom right corner) and it won't play anything I've already downloaded. Also, music that I have previously imported from CD's is not accessible.
I have read through some of the other support discussions and have seen situations similar to mine, but not exactly like mine. I would copy the file "iTunes Library.itl" from the old computer, but I have one concern: on the old laptop the external drive was Drive G: and on the new laptop it is Drive E:
I tried File --> Library --> Consolidate Files, but nothing happened.
I'm not sure what to do. Any advice would be greatly appreciated.
Regards,
BrandonCopy the iTunes Library.itl file from the old computer. iTunes can handle a change in drive letters as long as the relative paths from the database to the media is the same - typically where you have an iTunes folder (preferably in the root of the external drive) that contains both the iTunes Library.itl file and the iTunes Media folder, as follows:
See turingtest2's user tip on Make a split library portable for steps that may be necessary to bring your library into this layout.
Then, hold down SHIFT as you start iTunes, and when you see this prompt:
click on Choose Library..., navigate to the iTunes folder on your external drive, and select the iTunes Library.itl file.
Note also that the iTunes Media folder location setting in Edit > Preferences > Advanced does not provide iTunes information about the location of your library (that info is all within the database file). This setting is used, in conjunction with the Keep iTunes Media folder organized setting, to determine where iTunes stores new media when you add it to your library.
Once everything's sorted out, use a second external drive to create and maintain a backup of your library. -
Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?
Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places? -
Recorded 2 consecutive shows, one went to my External Drive and the other to the DVR any clues?
I recorded the Hatfield and McCoy programs the one which recorded @ 10pm went to the external drive and the one recorded right after at 12am went to the DVR. This just started around May 9th. We have done the Auto-Correct for our DVR and that has not solved the problem.
Are other shows recording to the internal hard drive as well? Once your show has recorded to either the internal or external drive, there's no way to move it to the other. So now that its recorded that way, its set. Please check newer recording to see if they are recording to the internal drive. It should only be recording to the internal drive if the external drive is full or the DVR is having problems.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan
Maybe you are looking for
-
Hi We have a report, which has a couple of sections in it, and are trying to include a count in the summary section, which should correspond to the number of records shown in the detailed section. The detailed section has a filter applied, and that f
-
Convert ALV list to PDF and send mails to respective persons
Hi All, I have a requirement ..we have written a program which will give o/p in alv list.Now I got a requirement to download that program to ALV format.Kindly help me how to approch for that we have some standard FM's for that like CONVERT_ABAPSPOOLJ
-
Wrong email count for BI Alert
Hi, We've recently configured BI monitoring for our BI landscape in our solution manager system 7.1 SPS10. Dashboard reports correct data however count of emails is usually wrong and so is the number of alerts in the alert inbox. For example for one
-
I keep getting this message when trying to navigate in myverizon: The problems you are experiencing are most likely the result of Web filtering software, firewalls, popup blockers or ad blocking software. You may resolve this issue by visiting your b
-
MacBook Pro with flashing 'Question Mark Folder'
I have a relatively new MacBook Pro that recently had the hard drive wiped clean. I would like to use it but do not have the Mac OS X discs that came with it. I do have a set that came with an older unit but they won't work. Any suggestions?