Hooray week 33 Blackbook!!!!

well i got my replacement for my week 31 yesterday. I nice week 33. I basically retraced my steps of what i did with the week 31 as far as loading programs goes, and i left it running all night with the lid closed (sleeping) and this morning it came right out of sleep no problem and no shutdowns (unlike my week 31 who after long sleeps shutdown 3 mins into use).
Things i have noticed with my week 33. The same iStat Nano widget i was using on my week 31 no longer reads the temp sensor on the MB (maybe it's a sign Apple has finally changed something). Also the spacebar is incredibly loud. Might be a case of sticking just a little bit. These are things i can live with though. Here is to hoping she lasts!!!!!

congraturation!
well, I have 24 week of macbook. it has no problem so far. I also use istat nano. but as you said, it doesn't show temperature. even battery information. therefore, Apple didn't change at all. it's all the same. Coreduo temp is not really accurate. I use hardware monitor. it actually shows two core chip temperature separately. plus, hard drive temp, battery temp, all kind of history from time to time.

Similar Messages

  • EFI update on 2.4 ghz blackbook

    i got home last night and read up on a website about the EFI update for the macbook
    so i went into software update, and low and behold, the update didnt appear.
    i have a new penryn blackbook...its only about 3 weeks old...
    any reason the update wont show up?
    p.s.-the update for my wireless aluminum keyboard showed up, but not the EFI update

    actorkid2215 wrote:
    i got home last night and read up on a website about the EFI update for the macbook
    so i went into software update, and low and behold, the update didnt appear.
    i have a new penryn blackbook...its only about 3 weeks old...
    any reason the update wont show up?
    yes, you probably don't need it.

  • Display issue (quality/brightness) on Blackbook

    Ever since I have had my blackbook, about 2 weeks ago, i have noticed that the display is very in a way, 'washed' out. I dont know how to describe it, but I feel like most laptops / lcd displays ive used are much more easy on the eyes.
    Its almost like the white balance is too strong, but ive messed with the gamma and it never looks real good. its always, i dont know, hard no the eyes?
    if anyone has any idea what i mean, please hit me up, im curious on what I shoul do....

    I buyed a White MacBook, but after a week of keyboard problems, ive decided to exchange it for a Black Book , with the same configuration and the same Leopard Version, and Im experiencing the same situation, and I also feel that the scrooling is less smoother. How come that the Black Book costs more and could have a poorer screen? Could it be possible?

  • My Blackbook's handrests are starting to crack... MB out of warranty

    After over 2 years of babying my Blackbook, the handrest has finally started to crack where the magnet meets the topcase. On a side note, I've never had anything replaced, so I didn't bother buying Applecare, but instead bought Circuit City's warranty, which expired October 2008.
    Now I notice this happening. An Apple store opened where I live a couple months ago, so I booked an appointment. Anyone know if Apple will help me out and replace the topcase?

    Agreed w/ all other posters...politeness (and patience) is key.
    I was in an Apple Store several weeks ago getting my AC adapter exchanged (burn marks on plug) and while I was waiting at the GB, a young lady next to me had a chipped white macbook.
    The Genius that helped me was very helpful, but the guy who helped the lady out surprised me; he took one look at it, told her to come back in an hour and he'd put a new case on--no questions, just seemed to want to fix her problem. I didn't notice if he did or didn't check her warranty first, but the girl seemed very happy when she left.
    If it puts your mind at ease....my wife's white Macbook (2.16) has been fine for the last 1.5yrs--no chips or cracks; my blackbook is 1yr old this March and has had no signs of chipping/cracking.

  • My blackbook's temperature-sensores are gone?!

    i got a blackbook .. the 2nd mainboar, and a new heatsink .. since then, my random shutdown is gone .. lucky me.
    but now .. suddenly one morning .. it seems that the CPU-temperature-sensores are gone.
    core2temp, istat isn't longer displaying the temperature .. temperaturmonitor is telling me: cpu1, cpu2 - the sensores aren't connected. but the HD-sensore is displaying the temperature.
    what's going on???

    hey kjk!
    yes i uninstalled/reinstalled several times .. i got two other apps/widgets which don't display the temp anymore too .. core2temp and istatpro .. i uninstalled/reinstalled these too .. i also repaired permissons and reset pram .. no effect!
    perhaps my service-point damaged something? because of opening my book several times to chance the mainboard and later to chance the heatsink?
    next week i get a new bottom-case for my blackbook .. because the service-point have scratched it when they opened my blackbook .. i hope they haven't damaged more than this!!
    i am frustrated .. first the internal HD was damaged, i got a new one .. then random shutdown, i got a new mainboard, no effect, so i got a new heatsink .. damaged the bottom-case, so i'll get a new one .. and now this. i got my blackbook now for 4 months .. 1 month out of this 4 it was in repair.
    blackbook   Mac OS X (10.4.6)   blackbook 2 GB ram 100 GB HD, blackpod 30 GB, universal dock, 3x airport express

  • Is That True that 19th or 20th week production is seem free of problem?

    Having read in this forum and other resources.. put on conclusion that it seem macbook in 19th and 20th weeks production for macbook white 2.0 Ghz have less trouble (heat, mooing, whining, etc). specially after i read some post that show that average temperature for this serial no. (19 and 20 weeks production) on this macbook 2.0 Ghz white have less cooler than other weeks production. any comment?

    I have a BlackBook with a 20 week production code and it is an excellent machine. No heat, mooing, whining, etc., to report. I even took it in to an authorized Apple Repair service to have the temperature checked with various temp readers, (soft and hardware readers) and they thought I was nuts. At most, when under heavy use/duress, the machine pumps out a mild 62degrees of heat. I rarely hear the fan go on and if it does it is only for a moment or two. Plus, I have it loaded up with ram (2GIG) and the largest hard drive I could get (120Gig) so it has to do a lot of work.
    My machine was also produced in China (4H) during the 988 production week (whatever that means!).
    Hey, I'm a very happy camper. I use my MacBook all day long and rarely turn it off until I go home for the night when I switch to an Intel iMac. I carry the BlackBook in a custom made lightweight black canvas slim backpack with black flannel sleeve, use a mini-usb-mouse, connect to WiFi w/o, problems and use it for a great many chores from 'Net stuff to editing movies with Final Cut Express.
    Tim...
    20" Intel iMac 2GRam/500G-HD, 13" BlackBook 2GRam/120G-HD, Black Vid iPod 60Gig   Mac OS X (10.4.6)  

  • Replacement MBP arrived -- week 27?!?!?!

    I just received my replacement MBP today. It was shipped on Monday from Ranchero, California. This is my second replacement.
    I find it a bit strange that I've receved a Week 27, when most people here are getting Week 28 and 29 units right now. A quick search revealed that people were receiving Week 27 units at the beginning of July. I'm a bit mystified by this.
    What gives?
    Oh, and the whine is worse than my previous two MBPs. I'm not yet sure what else is wrong, though there is the same light slight leak at the bottom of my screen as the last one -- perhaps every MBP has this?

    Your replacement came out of a warehouse not off the assembly line.
    Jim
    PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM   Mac OS X (10.4.7)  

  • Weekly "List View" in iCal

    Hello - my family has recently converted to Mac, and my wife and I have been long-time Outlook users in our workplaces...
    Trying to help my wife get her calendar data to iCal - one of the few things that we miss from Outlook is the "Week" view, which shows like Outlook's (7-Day view), which has a large grid of the 7 days in the current week, and all events displayed in a text-based "list" format, and clearly displaying numerical start and end times, rather than the graphical "block" method of iCal's default Week view.
    The Month view on iCal comes close, but it is rather cramped when you want a closer-in look, and also omits end time.
    Any suggestions?
    Thanks!

    ecernek,
    There is no event list option on iCal like the one on the iPhone.
    That number means that you have an event invitation. Use iCal>View>Show Notifications to choose what to do with the notification.

  • Clicking on Year view to get Week view in iCal

    In the  Lion version, is there any way I can double click a date and get to the 'week view' rather than the 'day view'?

    CaptainStarwars,
    Try using (⌘+C) and then (⌘+V). That action retains the event in the original, while also placing a duplicate in the new location.
    If you want to remove the event from the original time, use (⌘+X), then (⌘+V) in the new time frame.
    ;~)

  • Week "at-a-glance"

    I like a calendar where I can view at least my full work week and my entire work day. I can't figure out how to do this with iCal. In "week view" it shows all the days of the week, but I have to scroll up and down to see more than 5 or 6 hours. Anyone figure this out? Thanks.

    Greetings and welcome.
    The number of hours viewable is a settable preference.
    Go to iCal/Preferences/General and you'll be given choices for start and end of day, and how many hours to display. A good point is to display 1 more hour than you wish to include.

  • Weekly view in iCal.

    In iCal you can se what month and what date it is but not what week. You can look in weekly view but it dosen't say the number of the week.
    Example: Im a student and goes out on field study week 49. I want to be able to post in iCal all that week that im going on field study. When I look in monthly view I could se "ahh, week 48 normal study and week 49 field study".
    To put it simply just ad the week numbers to each week in iCal.
    This problem also regards to iPhone.

    Good find Kristian!
    Perhaps this is a more region specific usage?
    I was born and raised in the U.S. and neither at University nor in business have I ever had someone use a week number / day number within the calendar year as a point of reference. This could also be the fields in which I've worked (HealthCare (US Calendar), Accounting (Fiscal Calendar), IT (Corporate Fiscal Calendar)). Perhaps in other countries or professions this is more common? Or maybe it's just me
    If this is a feature that you would like to see added to iCal consider submitting feedback: http://www.apple.com/feedback/ical.html
    Cheers.

  • New 2014 X1 Carbon Touch - 1 Week Review

    I've had the New 2014 Carbon X1 for about a week now, so I thought I'd post a review about my experiences thus far.
    The version I received was the high end model, i7 4th gen, 8gb ram, IPS 2560x1440 touch display. This is the first Lenovo device I have purchased, and I did so at the recommendation of my brother who has owned a T series for the last 3 years. I am a film student, so my intention is to do some light video editing (not rendering) and lightroom/ photoshop work on this device (in addition to daily use of OneNote). I was looking for a powerful ultrabook with good build quality, battery life, and cooling when I purchased this laptop.
    Hardware:
    The hardware on this device has highly conservative look, which I appreciate. The laptop doesn't draw attention, but is pleasing to the eye when viewed up close. I like the fact that there are not as many creases or lines that run through the body of the device (when compared to other devices), which results in a more free flowing but unified appearance.
    The matte plastic on the top of the lid has a slightly rubberized texture, making the device easy to grip. My hands get hot and moist consistently, so the lid does occasionally pick up some faint moisture streaks if I carry it without a case. The slightly rubberized texture is pleasant to the touch and is easy to wipe down with a damp cloth. The inside of the device has a similar plastic around the keys and palm rests, but does not attain as much of a rubber (soft) feel as the lid. The texture on the palm rests is good, and stays cool under extended typing conditions.
    At first I was having issues with the keyboard whereby I would press the spacebar too early in a word. This is due to not pressing the letter keys down firmly enough. After adjusting my finger pressure while typing, I have been able to avoid this problem for the most part. The pressure I am applying to the keys is just a hair more than I am used to, but it is something that doesn't cause a major inconvenience. The backlight on the keyboard is excellent, not too bright or too dim at any one moment.
    The fingerprint reader took several tries to set up, mostly because there is a discrepancy between the lenovo fingerprint software and the integrated Windows 8 security fingerprint setting. By installing my index finger for login on both programs, I was able to successfully unlock the computer from sleep with a swipe of my finger. I am really impressed by the integration of a light on the sensor. When my print isn't accepted the first time, an amber color light flashes on site. Its easier to just look at the light than have to switch my glance back to the monitor after every swipe (like my previous HP laptop). Upon a successful swipe, a lime color light flashes on the reader.
    The screen on the device meets my expectations in every way. The display is IPS which is required for accurate photo editing, and it is LED which makes it very power efficient. Viewing angles are fine, but they could be a little better. Brightness is excellent, but the initial settings have Auto Brightness enabled. On this setting, pumping the brightness up to "100%" really means 100% of what the Auto Brightness function deems appropriate for the current ambient light. To have full manual control, Auto Brightness must be disabled. This results in a much brighter screen with beautiful whites, deep blacks, etc. This is a 300nit display so brightness is very well addressed. As a side note, the laptop was shipped with what appears to be an installed screen protector. There are several holes around the microphones and camera, and a tiny seam along the edge of the screen. The protector is virtually unnoticeable, so I'm leaving it on for the time being. It is much cleaner than any other factory installed laptop screen protector (or film) than I've ever seen (no bubbles, peel-off tabs, or misalignment).
    Cooling on the device is good, but it did not exceed my expectations. On power saver mode, the bottom of the laptop is cool to the touch except the back right corner. To the touch the corner feels as warm as something that's been in the sun for 5 minutes or so which is excellent. I have a temp gun so I'll have to check specifics later. On high performance mode, heat significantly increases. Most of the bottom of the laptop heats up even if no intensive tasks are being run. If the laptop is on my lap, I prefer it to be in power saver mode for this reason.
    Battery life is good for such a small laptop. I have 8 hours of back to back classes and I type notes basically the whole time. With this laptop, it is entirely possible to go that full period without a charger. So far I have done this twice. The settings I use are Wifi off, low brightness, and I enable high contrast mode in accessibility center so the glaring white of OneNote doesn't blind me during the film screenings.
    Webcam looks great for google hangouts, and the microphones are the most sensitive I've ever used. They can pick up the voice of someone to the side and across the room with great clarity.
    Overall the weight and feel of the laptop is very pleasing. Such a light weight for its size, and it feels solid to the touch and doesn't flex the slightest when handled different ways (carbon fiber ++). When compared to a macbook air, it is nearly identical in size and weight. However, I find typing on the lenovo is much more pleasant because the front edge of the palm rest isn't sharp enough to dig into my hands.
    Software
    The Lenovo Solution software (pinned to taskbar upon installation) is easy to use and responsive (unlike similar HP suites). I am actually going to rely on this software for updates instead of disabling it.
    For the first few days of use, there was a touch keyboard toolbar button pinned to my start bar that would appear again even after disabling it. I researched the problem and it was permanently removed from the taskbar by uninstalling the touchpad driver and reinstalling it. Odd.
    The adaptive row of keys is a good idea, but it is not as responsive as I'd like. When using the visual gestures or dragon voice control, there is significant lag between pressing the adaptive key and the program actually running. Each time, a lenovo window appears and it takes several mouse clicks to get to a functioning state for each button. One thing I am VERY disappointed about is the lack of any play/pause/stop/next/previous buttons for the adaptive row to use with a media player. These buttons are necessary, and not having them is unacceptable in my opinion.
    Touch responsiveness is liquid smooth in both power saver and high performance modes. Zooming in on bing maps, drawing with all ten fingers, swiping through metro - all a delightfully lag-free experience.
    Windows 8 - ahhhhhh. This is my first device to run windows 8, and it's alright. It'll take some getting used to, but from my experience so far it is responsive and useful in its design. I really want to be able to pin a firefox link to my start screen, but it seems like all I can do is pin the firefox app instead.
    As mentioned in a previous post, there are several issues with programs that aren't adapted to the ultra high res display. That discussion can be found here.
    The sleeve I purchased for this machine was the "V7 Ultra Protective Sleeve for 13.3-Inch Ultrabook and Notebook". The fit is great (the slightest bit loose on the ends) and the quality is above par for such a low price. I spilled a significant amount of apple juice on the case just yesterday (shakes head) and it protected the notebook well.
    Overall Experience:
    I'm pleased with my purchase. High price point? YES. For that amount I think the RAM should be at least 16gb and the SSD could be 500gb. Overall it is a pleasure to use and look at. Honestly so many things are right about this machine, it just allows me to focus on my work and stop worrying about my battery level or my trackpad glitching or the CPU overheating or lag or other petty issues that other notebooks make you deal with. That's what I like - its a smooth connection between me and getting things done while away from my desktop.
    I haven't edited video on it yet, so that will come in a few weeks. I'm planning on buying an external drive to hold the files while I edit, then just plug it into my desktop when I get home ready to render.
    Eli Bottom
    elibottom.com
    imagesalt.com

    ColonelONeill wrote:
    How's the new clickpad?
    Does the keyboard flex under reasonable pressure?
    Is the adaptive bar actually a pixel-based LCD or just a series of predefined patterns like the really old LCD displays?
    The "new" clickpad is very slick. The texture is good but just a little too rubbery for my taste. In comparison with my brother's old T series, I prefer the X1.
    Under reasonable pressure, absolutely not. The amount of force it takes for me to flex it is something I'd never do under normal use. It feels very solid in my opinion.
    Upon a close inspection, the adaptive touch bar appears to be the old LCD type. I really want those media keys.

  • TS1369 I fractured the screen on my iPhone 4, 2+ years old and the latest when bought so I bought a new phone but I can not get my previous purchases to download to itunes that were there 2 weeks ago. Changed apple id once and now it shows up when downloa

    I bought a brand new iPhone 4 as soon as it came out which was 2010 I think.  No problems until two weeks ago.  I fractured the screen on it so I am slowly losiong some functions like charge, touch screen ability and need to activate my new iPhone but I am having trouble with iTunes showing my full song library. I have 554 plus songs but some that will not update or download,. Two weeks ago is when this all began.  I used to have a different apple ID but changed it after a few months for security reasons.  Now when I try to observe my itunes library it only shows the most recent songs I have purchased,35.  Not all, and there are still songs that it states it can not download because my computer is not authorized, I authorize it and it says it is already authorized.  Then it gives me the old apple ID from years ago and I change it back to my new one, but this only causes it to do it over and over.  I called apple and they said all kinds of mean things that my son or husband had been using my ID or account, of which is impossible because all purchases have to be password protected and I get warnings if anyone attempts to access.  Also, their ID's are not my old one.  Their libraries have none of my music. I do not home share but I thought that iTunes says you can use the music for households if you homeshare so I do not know why the person was so abusive but I am frustrated. So, any ideas?  I was instructed to install icloud and did and it seems to me to be the culprit so I bought the stupid iCloud sharing manage,$25 yearly so that it automatically downloads your full library but no luck, still only shows the purchases I recently made with my gift card.  This was suggested by the apple care expert.  Can not update my phone until backed up, can not change phones until updated and backed up.

    I know it sounds weird, and that is the reason I posted my question.  Because my case is not like all the ones I've found online and it's confusing.  I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
    My playlists "ARE"  in my iphone 4s.  They are still there even though they do not show up when I plug in to itunes in my computer. 
    When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes.  I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes:  Music, Movies, TV shows, books.  That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS"  but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone.  Under "90's music" there are also other standard playlists that itunes automatically adds.
    Does anyone else have this issue or know how to get around this.  I am starting to think that I am going to have to recreate these lists on my computer

  • I had Microsoft Office installed in my Macbook Air by one of the technicians in the store, it was working fine the first week but after that it started popping a notice saying it cannot verify my suscription online and now I cannot open any documents?

    I just bought a Macbook Air almost a month now. When I bought it, the technician installed Microsoft Office 365 as they were having a promotion at the time. However after a week of using it, it started popping up a notice saying that it cannot verify Microsoft Office. I still managed to open the word document but as of today, it will not open. I took it to the Mac store last week, and they said that there was nothing wrong with it and they could not figure out any problem.
    I don't know what to do and I am in desperate need of help. I cannot open my documents at all and I have my research paper that I need to finish writing. This is very disappointing and extremely stressful for me. If anyone has any suggestions of how this can be fixed, please let me know. I do not want to lose my hard work =(

    Microsoft Office 365 is a subscription - based service. You have to pay for it... and keep paying for it... and paying for it... as in 365 days a year... or lose your hard work.
    Office Home Premium is a mere $10 a month, but a convenient annual subscription is only $100 a year. This is a substantial discount to Microsoft's Office 365 business products ($150 / employee / year).
    Such a deal! Are you not absolutely thrilled?
    Here are some slightly more reasonable alternatives, all of which are compatible with their Office equivalents:
    LibreOffice (donation-supported)
    NeoOffice ($10 but older version is free if you can find it)
    OpenOffice (completely free)
    Numbers ($19.99)
    Pages ($19.99)

  • Family share isn't working - we set it up and it was working fine for a few weeks then in the last few days it's stopped, we can't see the other members in our family share and it says we aren't set up but it doesn't allow us to confirm and reset up

    Help!  We set up family share a few weeks ago, and it was working fine with the organizer and two additional members.  The three of us could see each other on app and iTunes stores and could view each other's purchased items.  Then ... All of that disappeared.  We cant see each other's profiles any more and we definitely can't view any purchased items.  In addition, when we try to go in and jump start by downloading a free app or logging out and back of itunes, nothing works.  It seems to show we have family sharing in the iCloud settings, and when we click the Apple ID it asks us to confirm, and we confirm, and are asked if we want to change accounts because then we trigger the 90 day freeze period.  And we aren't changing any accounts - just trying to confirm the same accounts to get family share to work!  We are all on the same ios 8.1.3 and os, so I don't know what else to try! 

    No, I am a media professional who uses his MacBook Pro to connect to external monitors, and needs to continue to do so.  I don't want Apple TV.  I want my laptop to work again, like it's supposed to.  Like it used to. 
    I have a demonstration this week at work that requires me to plug into an LCD screen and I am hoping to have this resolved by then.  I am trying to convince my department to buy a Retina Mac and thousands of dollars worth of video software for live shows, and if I can't make it work, then I can't exactly convince them (or myself) to buy what I have been researching.
    Again, I don't want wireless video or Apple TV.  I don't want to buy any more stuff.  I want to know why my Thunderbolt to HDMI cable stopped working after my update, and how to fix it...preferably before this meeting. 

Maybe you are looking for

  • System copy post DB refresh error

    Hi, I am doing a post db refresh (Oracle/Solaris) and while creating control file getting error SQL> CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG; CREATE CONTROLFILE SET DATABASE "XXX" RESETLOGS ARCHIVELOG ERROR at line 1: ORA-01503: CR

  • Help with Date Range

    Hi, I have an Oracle form which allows users to enter :start_date_active(mandatory) and :end_date_active (can be null). I need to check in form using SQL if there already exists a record for this date range or if there is any overlapping date ranges

  • How do i convert mp3 to mp4

    My phone can only play mp4 not mp3, most of my music is mp3... How do i convert mp3 to mp4?

  • Still no solution

    I have a frame that appears when called, but I want the program code not to continue until the frame that appears is deactivated. Here is the code that I have people have given me several solutions all to no avail. public void ProcessEntry() final vi

  • Do you have support to integrate echosign with Dynamics CRM 2015, If Not, When it will be possible.?

    Do you have support to integrate echosign with Dynamics CRM 2015, If Not, When it will be possible?