Horizontally scrolling page views and vertically scrolling table views

This may be a feature request, and I'm trying to figure out if I'm trying to do too much in an iPhone app, but I want to have an outer view scroll horizontally with pages - easy to do with the UIPageControl and UIScrollView.
Within each page, however, I have a view (or nested views). In one of those views, I want to be able to scroll vertically (it's a table view) - but I can't! The message never gets down to the tableview because it's eaten on top - or at least it seems like it. It looks like I can do it in the simulator, but not on the phone.
Is this doable?

"Iain71" <[email protected]> wrote in
message
news:g6kj3r$s5p$[email protected]..
> This is the sort of thing I've seen on a few sites, and
wondered about
> before.
> Sometimes they can look a bit overboard, but I've just
seen one on this
> site
> that looks pretty well done, and doesn't take over the
page :
>
>
http://www.timesatlas.com/Pages/Default.aspx
>
> It's the bit below the main atlas pic, with the
different versions of the
> atlas.
>
> Does anyone know of any extensions, or tutorials for
recreating something
> along those lines? (Not sure if it's Flash or not?)
I'm pretty sure Project Seven (www.projectseven.com) has an
extension that
does almost exactly that.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Similar Messages

TableView horizontal and vertical scrolling is horribly slow

How can I adjust the horizontal and vertical scrolling amount?
I used the Ensemble example prorgam and streched the column so that the horizontal scroll bar is displayed. I then used the right scroll button which then scrolls extremly slow. I've looked at the javadoc on the tableview and I cannot determine how to set the scrolling amount. I can check if the table is scrolling but I would like to set the amount to be a column width at a time when using the left or right arrow.

It probably needs to be actually rendered to the Scene graph before the lookups can be made, so the lookups won't work in the initialize method.
There are a number of reasons I don't like this solution
- I don't like the string binding
- the fact that there are scrollbars that are descendant nodes of the table view is not documented, so (at least in theory) a future release of JavaFX could choose not to use the ScrollBar class (for example by creating its own scrolling implementation). This would break the code you have.
- if you decided to create (or use) an alternative skin for the table view which had other scrollbars in place (again, unlikely but theoretically possible), you'd end up setting the unit and block increments of those scrollbars too. In other words, there's no guarantee these are the actual scrollbars you want.
So, not ideal but at least if it works you have something...

Is there a way to hide the horizontal and vertical scroll bar?

Hi,
I have report with customized page height and width and I am displaying it in the windows forms.
When I am resizing the form wherein the crviewer is dock in, the horizontal and vertical scroll bars appears.
Is there a way for me to suppress the those scrollbars?
Thanks in advance.

Couple of ways I've been able to find info about. E.g.; there is not straight API off os the viewer (CRviewer.ScrollBar = False ).
1) Add Panel control onto the page and add report viewer control into a Panel. Set Scrollbar, width, height property of Panel control.
2) See http://www.dotnetspider.com/forum/266932-Remove-Scrollbar-from-Crystal-report-Viewer.aspx for another idea.
If either of the above works for you, please let us know as I have not tested this yet.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Document number ranges in entry view and in General Ledger view

What is the difference between Document number ranges in entry view and in General Ledger view ?
We have new GL activated in our system , and found that the GL Document types ( SA) are assigned to document number ranges in entry view . What is the need to define document number ranges in General Ledger view ?

Hi,
Document Number Range in entry view is the document numbers which are posting in your leading ledger. You cant achieve the same document number range to the general ledger view. A General ledger view can have both Leading ledger view and non leading ledger view therefore document number range should not be kept same for both ledgers as your running document number gets skipped.
That to some times you can only post documents to only Non Leading ledgers. Therefore a separate number ranges needs to be created for general ledger view
Hope u understood.
regards
srikanth
Edited by: boddupalli srikanth on May 21, 2009 9:28 PM

Can I associate a ip dns view and/or ip dns view-group to a specific int ?

is there a way to bind/associate a ip dns view and/or ip dns view-group to a specific interface so I can end with something like:
interface FastEthernet0/0 description Inside
interface FastEthernet0/1 description OutsideISP#1 ... want associated to dnsViewISP1
interface FastEthernet0/2 description OutsideISP#2 ... want associated to dnsViewISP2
ip dns view dnsViewISP1
domain name-server n.n.n.11
domain name-server n.n.n.12
domain name-server interface FastEthernet0/1
domain resolver source-interface FastEthernet0/0
ip dns view dnsViewISP2
domain name-server n.n.n.21
domain name-server n.n.n.22
domain name-server interface FastEthernet0/2
domain resolver source-interface FastEthernet0/0
ip dns view-list dnsViewListISP1
view dnsViewISP1 1
restrict source access-group aclDNS
ip dns view-list dnsViewListISP2
view dnsViewISP1 2
restrict source access-group aclDNS
... so traffic routed to ISP#1 use dnsViewISP1/dnsViewListISP1
... so traffic routed to ISP#2 use dnsViewISP2/dnsViewListISP2
I can set ip dns server view-group dnsViewListISP1 or dnsViewListISP2 but not both
Router is acting as caching server with ip dns server enabled
IOS 12.4.15T.9

So after a couple of hours of playing around and testing I've finally found the correct settings to achieve this, I wasn't able to find the configuration options through the Windows Airport Utility client but borrow a MacBook Air from a family member and was able to find it:
1. Open the AirPort Utility on a Mac computer.
2. Click on your AirPort Device, then click "Edit".
3. Select the "Internet" tab.
4. Now in the "Domain Name" section type "yourhostname.ddns.net" or it could be "yourhostname.no-ip.com" or whatever other hostname No-IP.com may have assigned you.
5. Now click the "Internet Options" button.
6. At the bottom of the windows that opened tick the check box "Use dynamic global hostname"
7. In the "Hostname" section fill it with "no-ip.ddns"
8. In the "User" & "Password" sections fill it with the username and password that you chose when creating your "No-IP.com" account.
9. Now click "Save" which will save the settings and click "Update" to update the Airport device which will also restart it.
And you're done!
Please note that it does sometimes take up to 5 to 10 minutes to update the DNS settings to No-IP.com, which caused me to think it wasn't working initially.
Good luck!

Iview Height and vertical scroll

Hello,
EP 6. NetWeaver 4 question.
We have several iviews on a page. They are simple Dynpage with beans/JSP rendering HTML. We would like to limit the Height of each Iview and then have a vertical scroll bar automatically appear to allow the user to scroll the the iview.
Had no trouble doing this in EP5. Nothing we try seems to work in EP6.
Any ideas?
Gary Hill
E.B. Developer
Lamson&Sessions

Hi Gary
What is your page setting for the Iviews is it fixed or full page or Automatic.
Select the Iview as fixed and set some value and preview the same in the Page. In the page only you will be able to see the iView size.
Regards
Senthil
Message was edited by: Senthil Boomi

Firefox moves the page in the window a bit to the left when browsing pages which need vertical scrolling compered to pages which do not need scrolling. This is not the case with IE.

''Locking as duplicate post, please continue at'' [/questions/748639] - Quarantine
I have asked this question before, but can not find any answer. My problem can be verified by trying to browse the variouws pages from the menu on my Web site, see URL below.
Thanks, Jakob Stette

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

Single page articles juddering vertically in content viewer

I've got a multi article folio, with some of the articles being multi paged and some single paged. Is there any way to stop the single paged ones 'juddering' up and down? - the viewer then can't swipe while this is going on and invariably results in the scroll bar showing at the bottom if they tap the screen while the juddering is going on.
Thanks in advance.

Set them to horizontal swipe only in the article properties.

Wiggly vertical scrolling in Mavericks; no vertical scroll lock

Hi,
My biggest problem with Mavericks so far has been that there is no vertical scrolling lock as previously in ML.
In all applications and throughout the OS scrolling vertically is wiggly, so when you scroll with the touchpad with two fingers down and up, the content also moves a little but to the right and left. If the window can be scrolled also sideways, this causes the page to scroll down-up and left-right at the same time making normal scrolling impossible.
Scrolling was perfect in ML and also it is perfect in iOS because there is vertical scroll lock. There is even an Apple patent for this particular feature and this had been advertised as best of the apple way of scrolling back then in earlier days.
I see now that we don't have it any more in Mavericks. This makes the scrolling experience very very bad.
Can you do something against it? Is this a feature which you could switch off? Was not the case on ML. I've seen it on all Mavericks installations so far not a personal case.
Thanks,
Balazs

CHOCH, I have it too, with Pages for Mac, senseless and useless trash when you try to continue like that

Query and update a table/view

What is the best & fastest way to do this?
1) Put up a query input region for users to enter parameters.
2) Run a query on a table/view using those parameters.
3) Allow the output in (2) to be modified by user (multiple rows at a time) and then Submit the updates back to update th table/view
I can do (1) and (2) easily. How can I do (3)?
Thanks

Make a report on the table. Go to the definition of
the report column and change the "Display As" type to
text field or select list or whcih ever is
applicable. Write a process on submit to insert these
values back to the table. You will have control over
which columns the user can modify.Thats a good idea and I was able to start on it. But how can my after submit process tell which rows to modify? i.e. what will my after submit process look like?
for rec in (....)
loop
update my_table set
end loop;
Help? Thanks

Edit Problem after changing and transporting a table view

Hallo Experts,
I hope you can help me.
I changed a Z-table in the Data Dictionary. For this table there exists an Tableview.
After I added three new fields I generate a new tableview:
Utilities -> table maintenance generator
Change -> create maintenance screen -> ok
after this I optimized the layout of the screen.
On our Enviromentsystem my Tableview works perfect.
I can make changes in the table.
Then I transported the new tableview to our testsystem.
There I started the sm30 "Maintain table view" and tried to change table entries.
After a click on "Maintain" the following Message appears:
TK 730 Changes to Repository or cross-client Customizing are not permitted.
The strangest thing is, that before my transport, it worked, I could change table entries.
There were no changes on the userrights.
And I can change a similar table on the testsystem.
I compared the properties of both tables. But I could not find a difference.
Have anybody an idea where the error can be?

Hi
Caution: The table is cross-client
Message no. TB113
Diagnosis
You are in the process of maintaining a cross-client table. You are using the standard table maintenance screen here, which is frequently used to maintain client-specific Customizing entries. This message serves to warn you that each change you make will have an effect on all other clients in the system.
System response
You have the authorization required for cross-client maintenance.
Procedure
Think carefully about the effect of your changes. Due to logical dependencies between client-specific Customizing and applications data on the one hand and cross-client Customizing data on the other hand, changing or deleting cross-client data could result in inconsistencies.
Therefore such changes should be carefully planned and coordinated, taking all the clients in the system into consideration.

How can i view and manipulate the Tables created in SAP DB (Netweaver)

Hai ,
i created one table in SAP DB integrated in Netweaver for J2EE Application.
How can i view the table in SAP DB.
Can i see the data inserted in that table in table view manner ?.
can i edit the data in the SAP DB table?.

Hello Kishor,
You need to download the SQL Studio. With this tool login to the SAPDB server and you will be able to view the content of your table and manipulate your table as well
http://dev.mysql.com/doc/maxdb/tools.html
Regards
Abdul

Open a new page from a button of table view

Hello,
I search how to open a new page when i click on a button of a table view. I already tried to use navigate connector but i have an error when I compiled it (flash doesn't support). Do you know a workaround or tips ?
Thanks,

Hi Aurelien,
Why don't you try creating a pop up iView on clicking the button on your table view.
You can have a look at this link for understanding how a pop up iView works:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a88c4b3c-0a01-0010-afa4-a6eeb859d8d2
You can also see page 50 of this doc:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe
Bye
Ankur
Do reward points if it helps!!

Dreamweaver CC automatically deletes code in code view and elements in design view

When I open a file in Dreamweaver, it automatically shows a * next to the filename - showing it has been edited.
Then often when I select some code in code view, or an element in design view (such as a table, an image, some text) it is suddenly deleted.
The problem is especially bad (happens without fail) if I am switching between programs. But also happens when I'm not switching.
I do not have this problem on a different user account.
I have reinstalled Dreamweaver three times now. Also renamed preference and configuration folders. Tried with a wired mouse and keyboard. Nothing has worked.
I can't think what I did to cause this. I installed MAMP recently - but have uninstalled it correctly I think.
I had an issue with one file in which there were about 30 Spry collapsible panels. I kept getting this warning:
"A script in file Macintosh HD:Applications:Adobe Dreamweaver CC:Configuration:Shared:Spry:DesignTime:EditingUtils.js has been running for a long time. Do you want to continue?"
I have to click 'yes' many times to get into the file, and the warning keeps coming up while the file is open.
However, my big issue of DW CC deleting code and elements happens whether or not this particular file is open.
So this may have nothing to do with it.
Any ideas anyone?
Adobe's customer service has not helped. In fact, I have not even been able to get through to anyone on the phone - having waited literally hours listening to music, and getting shunted from person to person. And then their promised 'call backs' never happen.
Thanks,
- Greg

I do not have this problem on a different user account.
You've got a bad/corrupted user account. Create a new one with Admin level priveleges and delete your old user.
Nancy O.

Saving PDF form on Mac prevents viewing and printing by another viewer

We run a student competition which is affiliated with a national competition. The national competition provides a set of forms that must be filled out by the students, teachers, etc. We have a process set up whereby students can download a PDF form (which is enabled by the authors for saving from Reader). They are supposed to fill out this form (actually several of them), and then save the file(s) to their drive. Once they have the forms filled out and approved by their teacher, they upload them to our website via a standard web form, which simply saves the uploaded PDF for later viewing by the student, teachers, judges, and committee members. When students do this using Adobe Reader on a PC, it works fine. (I'm not sure if Reader X works, actually, but I know Reader 9 does). The problem, though, comes up with Mac users. When they do the same thing, it seems to override the extended rights in the document, resulting in a document saved on their disk that displays with all the fields initially unviewable (that is they all appear blank). If you click on one of the fields, you can view the fields one at a time. Each field appears and disappears as you move thru the document. But we can't simply read the form, nor can we print a copy (which is necessary if the student wins and proceeds to the national competition.) This is true if the form is uploaded or emailed or transported by USB drive--it is simply a property of the saved file. In our testing, this appears to be a generic property of forms processed on a Mac--and we haven't found a way around it. Is there any way for a student who has filled out a form on a Mac to save the form while PRESERVING the extended rights? Or do we just have to tell them that Macs don't work right? If there is a way for them to do this, I could provide the instructions on the page that delivers the forms. But we've tried to explore the Mac interface (inside Safari and in the PDF viewer that is provided on the Mac systems) and can't find any place that gives options that seem to affect the extended rights. Help!

kblyons46 wrote:
and we haven't found a way around it. Is there any way for a student who has filled out a form on a Mac to save the form while PRESERVING the extended rights?
There's an easy way around it. Make sure they are using Adobe Reader to fill in the form. 99% of these cases are because they are using the Mac Preview application to open PDF's and it will corrupt Adobe forms.

Horizontally scrolling page views and vertically scrolling table views

Similar Messages

Maybe you are looking for