Hosting an oracle application

Hi all,
Hope this is rught forum,..
Could any one show some light on what are the minimum requirements to host an oracle application like apex,........like
Server type
domain / static IP ...
Regards/

You need to consider the following questions:
- what are the documented minimum requirements?
- how large is the total user-base?
- what is the normal user concurrency?
- what is the maximum expected concurrency?
- how much data will I need to store?
- what are the year-on-year growth figures?
- what resilience is required?
- what system response times are required?
- what's the SLA (e.g allowable downtime etc.)?
- what's my budget?
If you answer these questions carefully, then you will arrive at a set of hardware options.
Cheers,
R

Similar Messages

How to host an Oracle application on the web?

hi,
I have an Oracle application developed using Forms 4.5 which I now want to put up on the web so that it can be accessed by all my customers.What do I have to do to acheive this? What are the oracle products that I will have to purchase in order to accomplish this? I would also like to get a step by step guide as to how to go about it.
thanks in advance,
satheesh

Satheesh,
This is the Oracle Portal discussion forum. You'll have better luck posting your question on the Forms 6i Forum.
Regards,
Jerry
null

Host status is unavailable oracle application manager

Hi All
we have EBS 11.5.10.2 on MultiNode servers (SUNFIRE V890I) with solaris 10 platform
after converting to multinode system we notice that host status in oracle application manager for one of the two nodes is UNAVAILABLE
the system is working fine but it's confusing of making troubles in future
could you please provide us with more information about this issue
Thanks
Mohamed

Hi,
1) Make sure you have a valid entry in the hosts file and you can ping the server. Also, make sure this node is trusted registered in the database.
Note: 429328.1 - Application Server Status Always Shown as Down in OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=429328.1
Note: 287415.1 - Host Status In Application Dashboard Overview Tab Shown As Down in OAM
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=287415.1
2) Clear the FND_NODES table, and run AutoConfig on the database tier, then on the application tier (on every application tier node)
Note: 391406.1 - How to get a clean Autoconfig Environment
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391406.1
Regards,
Hussein

Change host name and url of Oracle Application

Hello, I need help in changing the url of Oracle Application
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002
Please help

Richa wrote:
Hello, I need help in changing the url of Oracle Application
OLD url - http:// appssvr.XYZ.com:8007
NEW url - http://erp.XYZ.co.in:8002
Please helpOr, you could use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Run preclone, change the hostname at the OS level and in the hosts file then run postclone.
Remember to clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]). You may also need to run cmclean.sql as per (Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1]).
Thanks,
Hussein

Is there any Profile option available to encrypt and use APPS password Oracle Application Host script

@Hi, How do we encrypt APPS password usage in Oracle Application Host script and still let it be used in encrypted format (eg.$1, $FCP_LOGIN should not show plain text password).
Appreciate the process along with any Profile available to place this control.
Concurrent Program Setup Option SECURE/ENCRYPT controls $1, $FCP_LOGIN respectively, but Developer still has access to view/log the APPS Password.
Can we have a System profile or an Apps DBA level Setup to encrypt and use the APPS/Password.
Thanks in Advance
Lakshmi

Are you linking the host script to fndcpesr? E.g.:
Host script defined with prog extension:
XXSCRIPT.prog
Move it to relevant dir:
$XX_TOP/bin
Create a soft link to fndcpesr
ln -s $FND_TOP/bin/fndcpesr XXSCRIPT

SMTP host for the e-mails in Oracle Application Server 10g

Hi,
I would like to ask in which file from the Oracle Application Server 10g is the configuration for SMTP Host for the e-mails.
Thank you,
Mihaela

Hi Ibrahim,
You can do an easier installation by only using base release of 10.1.2.0.2. What I stated would be good practice:
By * DB 10.2.0.3 ---- > u mean (Database Version) => Yes, use Database version 10.2.0.3
By * Identity Management 10.1.4.0.1 (OID/SSO) -----> u mean (Application Server infrastructure) => Yes, use Identity Management 10.1.4.0.1 instead of the infrastructure on Application Server 10.1.2.0.2
By * Application Server 10.1.2.0.2 -----> u mean (Middle Tire Forms&Report Services) => Yes, use Application Server 10.1.2.0.2 as middle-tier. When installed, upgrade it to 10.1.2.2 (with the latest patchset)
By * Patch Application Server DB client to 10.1.0.5 ----> u mean what? => Before you upgrade AS to 10.1.2.2 it's mandatory to upgrade the Database client software in the Application Server 10.1.2.0.2 home to 10.1.0.5. Default is 10.1.4. You'll see database client version by for instance starting SQL*Plus.
For your Developer (Forms) upgrade: Forms 4.0/4.5 - 6i -> 10g. See: http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html. If you have tons of Forms, then I recommend using a tool like the great PITTS.CON (http://www.pitss.com/en/pcon/index.htm).
Regards,
Martin

Need help on installing Oracle Application express 3.2

Hi,
I had downloaded Oracle 11g database and installed the personal edition.I got the Enterprise manager login page working and also the DBConsole
I had Downloaded APEX 3.2 and wanted to install apex 3.2.I wanted to do the following scenario
Scenario 3: Install from the Database and Configure the Embedded PL/SQL
Gateway
Planning to do these steps: ( I have few questions on these steps and are below each step)
■ Running the apxconf.sql Configuration Script
Do I have to install Oracle Application express or is it already installed in 11g personal edition?
Do I have to create a seperate database or schema for this step( I have only one instance orcl1) ?■ Verifying the Oracle XML DB HTTP Server Port
Can I do this step in my current orcl1 instance,if so which user■ Enabling Oracle XML DB HTTP Server
Once I carry out these steps, Can I access the admin page for apex with https://localhost:port/apex_admin ?
Am I missing any other steps ?
Thanks

I have one idea..
Try to install again:
1) download and unzip apex_3.2 in $ORACLE_HOME
You will have:
$ORACLE_HOME/apex - old directory
$ORACLE_HOME/apex_3.2 - new directory
2) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apexins tablespace_apex tablespace_files tablespace_temp images
Where:
tablespace_apex is the name of the tablespace for the Oracle Application Express application user.
tablespace_files is the name of the tablespace for the Oracle Application Express files user.
tablespace_temp is the name of the temporary tablespace.
images is the virtual directory for Oracle Application Express images. To support future Oracle Application Express upgrades, define the virtual image directory as /i/.
Example:
@apexins SYSAUX SYSAUX TEMP /i/
3) check installation log for errors
4) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apxconf
set admin password
set port
5) run @apxldimg.sql $ORACLE_HOME/apex_3.2
6) check for running listener and try to login apex: http:\\host:port\apex\apex_admin
Good luck!

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

Data sources in deploying web app. to Oracle Application Server

I am using simple web application - JSP with BC4J (JDeveloper 9.0.5.1).
I want to configure my application to use Data Source instead of JDeveloper connection and deploy it to production database, so DB administrator will take care of username and password.
First, I create a new application module configuration that uses a data source instead of a JDeveloper connection with BC config. name TestAppModuleWithDS.
Then I modify my application client (DataBindings.cpx) to use the new configuration (TestAppModuleWithDS).
After that I create deployment profile and deploy to application server connection and try to test it on standalone server, and on production server together with my DBA.
But the application is not running, always displaying error messages...
Please what is the procedure and how to set Config of ApplModule.
It is working properly with embeded server, but on standalone server there is an error:
java.lang.UnsupportedClassVersionError: oracle/jdeveloper/cm/ConnectionDescriptor (Unsupported major.minor version 48.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.OC4JSecureClassLoader.defineClassEntry(OC4JSecureClassLoader.java:172)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.defineClass(ContextClassLoader.java:1154)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.findClass(ContextClassLoader.java:390)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.loadClass(ContextClassLoader.java:138)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:271)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
     at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:817)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:169)
     at lastcoil.jspService(_testjsp.java:52)
     [SRC:/testjsp.jsp:11]
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Unknown Source)
Application module in testjsp.jsp (_testjsp.java) is:
oracle.jbo.html.jsp.datatags.ApplicationModuleTag __jsp_taghandler_1=(oracle.jbo.html.jsp.datatags.ApplicationModuleTag)OracleJspRuntime.getTagHandler(pageContext,oracle.jbo.html.jsp.datatags.ApplicationModuleTag.class,"oracle.jbo.html.jsp.datatags.ApplicationModuleTag id configname releasemode");
__jsp_taghandler_1.setParent(null);
__jsp_taghandler_1.setId("TestAppModule");
__jsp_taghandler_1.setConfigname("test.TestAppModule.TestAppModuleWithDS");
__jsp_taghandler_1.setReleasemode("Stateful");
__jsp_tag_starteval=__jsp_taghandler_1.doStartTag();
if (OracleJspRuntime.checkStartTagEval(__jsp_tag_starteval))
DataBindings.cpx is configured like this:
?xml version='1.0' encoding='windows-1252' ?>
<JboProject
id="DataBindings"
xmlns="http://xmlns.oracle.com/adfm/application"
version="9.0.5.15.88"
SeparateXMLFiles="false"
Package=""
ClientType="JClient" >
<Contents >
<DataControl
id="TestAppModule"
SubType="DCBC4J"
SupportsFindMode="true"
SupportsTransactions="true"
Package="test"
FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
Configuration="TestAppModuleWithDS" >
<Parameters >
<Parameter
name="Sync"
value="Batch" >
</Parameter>
</Parameters>
</DataControl>
</Contents>
</JboProject>
D:\JDeveloper10\j2ee\home\config\data-sources.xml je:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources.dtd">
<data-sources>
     
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="tiger"
          url="jdbc:oracle:thin:@localhost:5521:oracle"
          inactivity-timeout="30"
     />
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="TestAppModuleWithDS"
          location="jdbc/hmlCoreDS"
          xa-location="jdbc/xa/hmlXADS"
          ejb-location="jdbc/hmlDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="user1"
          password="psw1234"
          url="jdbc:oracle:thin:@server.com:1521:sidname"
          inactivity-timeout="30"
     />
D:\HotStripMill Projects\bc4j\src\lastcoil\common\bc4j.xcfg
<?xml version = '1.0' encoding = 'UTF-8'?>
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="TestAppModuleWithDS">
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCDataSource>jdbc/hmlCoreDS</JDBCDataSource>
<jbo.project>bc4j</jbo.project>
<AppModuleJndiName>test.TestAppModule</AppModuleJndiName>
<java.naming.factory.initial>oracle.jbo.common.JboInitialContextFactory</java.naming.factory.initial>
<ApplicationName>test.TestAppModule</ApplicationName>
</AppModuleConfig>
</AppModuleConfigBag>
<ConnectionDefinition name="hml">
<ENTRY name="JDBC_PORT" value="1521"/>
<ENTRY name="ConnectionType" value="JDBC"/>
<ENTRY name="HOSTNAME" value="server.com"/>
<ENTRY name="user" value="user1"/>
<ENTRY name="ConnectionName" value="hml"/>
<ENTRY name="SID" value="sidname"/>
<ENTRY name="JdbcDriver" value="oracle.jdbc.driver.OracleDriver"/>
<ENTRY name="password">{904}05437B2C11AE10318B521E7C6EE279666E</ENTRY>
<ENTRY name="ORACLE_JDBC_TYPE" value="thin"/>
<ENTRY name="DeployPassword" value="true"/>
</ConnectionDefinition>
</BC4JConfig>
</data-sources>
Thanks!

iAS 1.0.x is StoneAge Technology (TM).
Using the E-Business Suite you should look into the newer versions of the Application Server. I believe that 10.1.2.x supports the EBS, otherwise 9.04 should do the trick. Webservice support is much better in the newer versions. 1.0.x is from around 2000/2001 so the Webservice technology back than was "different" :-)
cu
Andreas

Can not Start Oracle Application Server ORB process

I have just installed Oracle Application Server (OAS) on my
machine running Windows NT 4.0 Workstation. When I logon to the
OAS manager and tried to start ORB, I got below error message:
Please wait while the command is being processed on host ssoh_x
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
Starting ORB processes...Returning filename D:
\orant\orb\admin\.event
waiting for ORB to be ready...
YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
ORB is not responding. Please restart manually...
I have tried to re-install OAS for the second time. But I still
got the same problem.
I plan to use the OAS, together with Oracle Internet Commerce
Server (ICS) to develop an e-commerce project. I am yet to
download and install the ICS. I don't have any Oracle databases
installed in my machine. I'm using MS SQL Server 7.0 instead.
Please advised me on how to configure the ORB so that I'll be
able to start the application server.
null

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

How to create URL in Oracle Application Server ?

Hello,
I would like to know how to create a URL in Oracle Application server (LINUX) so that our application can be invoked from each and every machine in our
local hosting.I expect a quick reply.

You question is not so clear. Basically, after installing infrastructure and middle-tier instances, you can simple run http://localhost:port/appication from any web browser.
If not, what is your requirements?
Jaffar

Unale to print pdf files in oracle application server using oracle forms

Hi
We are using oracle developer suite 10g(10.1.2.3.0) in Windows vista. (test environment)
Oracle application server 10g(10.1.2.3.0) in Hp-UX 11iv3 (production environment)
We are able to print pdf files in test environment from oracle forms using the below command:
host('/usr/bin/lp -d p9775hplaser '||'/ashome/output/'||:print_file);
But while declaring to the live environment it is not working
host('cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser');
but when the above command is put in hp-ux cmd prompt it is workinh"'cat '||:pdf_print_file||' | acroread -toPostScript | /usr/bin/lp -dp9775hplaser'";
Kind ly tell me whether the problem i with the host command and some other command is available for printing files from forms.

Here is my guess:
declare
AppID PLS_INTEGER;
begin
AppID := DDE.App_Begin('acroread -toPostScript '||file name,DDE.APP_MODE_MINIMIZED);
end;

Installation of forms reports and oracle application server 10g

Hi,
I have been using client server till now, now planning to move to 10g. Got the developer suite 10g.
Tell me how and where to install forms/reports and Oracle application server... I mean forms reports should be on developer PC then what about application server? should it be on a different dedicated server? or can i have it on database server?
in case, if I install application server on one server and database is on another server then what about forms and reports?
please tell me which is the right option?

cypdon99 wrote:
Hi,
I have been using client server till now, now planning to move to 10g. Got the developer suite 10g.
Tell me how and where to install forms/reports and Oracle application server... I mean forms reports should be on developer PC then what about application server? should it be on a different dedicated server? or can i have it on database server?
in case, if I install application server on one server and database is on another server then what about forms and reports?
please tell me which is the right option?Ideally, you should have two separate server machines.
One for the database server.
One for the Application Server.
The Application Server is basically used for hosting your forms and reports, so you dont have to place the forms and reports on the developer PC or at any other server.
best regards
http://fahdmirza.blogspot.com

PSP Can I NOT use Oracle Application Server

Hi, Can someone tell me if I can Use Apache and Tomcat to Serve
my PSP Web Page. If there is no way-out I will have to use
Oracle 9iAS. I tried to find Documentation on mod_plsql, but
could not find any (including mod_plsql).
Thanks!!!

Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null

Hosting an oracle application

Similar Messages

Maybe you are looking for