Housekeeping and configuration of SAP J2EE

Hello,
I would like to configure SAP J2EE in some points of administration, but I can't find any useful documentation.
First of all I want to change directory of core and heap dumps, because the fill my /usr/sap directory very fast. Nice would be to supress the dumps or regulate their size.
Second I would like to have some housekeeping jobs, like deleting old traces, logs and dumps to decrease size of SAP J2EE directory.
Do you know parameters for managing dumps and logs? If I have to do housekeeping by crontab, cronacle. UC4 or manual, which files and directories do I have to have an eye on?
Best Regards
Andreas

Hello Andreas,
The location of the core and heap dump generation is set with JVM parameter.
Here is explanation about IBM
http://publib.boulder.ibm.com/infocenter/javasdk/v5r0/index.jsp?topic=/com.ibm.java.doc.diagnostics.50/html/location_of_heapdump.html
For sun jdk, the following JVM options could be used
-XX:HeapDumpPath=<directory where to save the heap dumps>
Use the Log Configuration service in NWA or Visual Administrator to configure the logging.
You could find more information about that at:
http://help.sap.com/saphelp_nw04s/helpdata/EN/e2/f410409f088f5ce10000000a155106/frameset.htm
Regards,
Ventsi Tsachev

Similar Messages

Security Provider(JAAS chaine module)logging with SAP J2EE Agent Policy 2.2

Hello,
I have installed and configured a SAP J2EE Policy Agent 2.2 on a SAP J2EE Application Server 7.0 and installed an opensso 8.0.
I have configured and deployed a jsp application with the descriptor containing the agent filter on the SAP J2EE.
I have configured the security provider (based on JAAS) as follows:
EvaluateTicketModule
AmSAPWASLoginModule
CreateTicketLoginModule
I have then increased the severity check of logging on the SAP J2EE Application Server for:
com.sap.security.server.jaas
com.sap.engine.services.security
But since the installation of the agent, I am not able to see the logs of the different logon modules and be sure that the CreateLoginModule has been done.
I need to check that after the success of the agent login module, it goes through the CreateTicketLoginModule, how can I check that.
Thanks,
Tanguy Mezzano
amFilter log:
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: Notification Task Handler
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: Port Check Task Handler
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
PortCheckTaskHandler: request is on valid port
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: FQDN Task Handler
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
FQDNHelper: Incoming Server Name: [myserver] Result: null
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: Not Enforced List Task Handler
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
NotenforcedURIHelper.isNotEnforced(/myApp.jsp) found in enforced cache
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
NotenforcedURIHelper.isNotEnforced(/myApp.jsp) => false
11/13/2008 06:02:39:810 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: SSO Task Handler
11/13/2008 06:02:40:122 PM CET: SAPEngine_Application_Thread[impl:3]_35
SSOTaskHandler: SSO Validation successful for id=myUser,ou=user,dc=myCompany,dc=com
11/13/2008 06:02:40:122 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: URL Policy Task Handler
11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
URLPolicyTaskHandler: access allowed by AmWebPolicy
11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: now processing: Redirect Check Result Handler
11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
RedirectCheckResultHandler: removing redirect counter cookie
11/13/2008 06:02:40:310 PM CET: SAPEngine_Application_Thread[impl:3]_35
AmFilter: result =>
FilterResult:
Status : CONTINUE
RedirectURL : null
RequestHelper:
null
Data:
null
-----------------------------------------------------------

I want to use my login page in BEA instead of Access Manager or Distributed Authentication Module. I think it is similar to the problem you have? Did you come up with a solution?
My problem is described in more detail on this thread:
http://forum.java.sun.com/thread.jspa?threadID=5197783

How to install and configure configure IGS for J2EE server 700

Hi,
Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
Please let me know the procedure for this.
Thanks an Regards,
Smriti.

Hi,
Check the below link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
Regards,
Suresh.T

SAP J2EE Engine configuration in NWDS 7.1

Hello everybody,
I would like to configure the SAP J2EE engine server (host and port) in NWDS 7.1.
In NWDS 7.0 I used to go in the Preference > SAP J2EE Engine and select "SAP J2EE engine is installed on a remote host" and enter the "Message server host" and "Message server port".
In NWDS 7.1, there is no "SAP J2EE Engine" in the preference and the only place where I found a field for J2EE engine was a local host only one.
How can I do in 7.1 what was able to do in 7.0?
Thanks in advance
François

Hi Fronis,
I feel you just installed NWDS CE 7.1. But there is a lenghty process to achive that. After installation of 7.1 in menu path goto help>software updates>link*(first option)>login to servicemarketplace>there are two options first select 1st after completion next select 2nd it will take long time(bcozz it will download nearly 1.7gb).
try this and let us know....
Regards,
Anil.

Starting and stopping SAP J2EE Engine

Hi guys,
         I have downloaded and installed trial version of SAP Web Application Server (SAP Web AS) Java 6.40 for Microsoft Windows XP.
   I wanted to launch SAP J2EE Engine and Software Deployment Manager (SDM) to run my web dynpro application. The Netweaver Developer studio getting started guide has a link for starting and stopping the SAP J2EE Engine but its not working for me. I get an error with the link.
Is it possible for someone to let me know how to launch J2EE engine and SDM. Also what server settings I need to make in the menu path Window -> Preferences -> SAP J2EE Engine.
Any help will be appreciated.
Thanks,
Mandar

Hi Ivaylo and Thomas,
    Thanks for your help, It works fine. For some reason after starting my J2EE server, when I start my Netweaver developer studio, it gives the following error
   JVM Terminated Exit code=1
   c:\j2sdk1.4.2_05\bin\javaw.exe
   -Xmx512m
   -Xms128m
   -XX:PermSize=128m
   DallUserDir='C:\Documents and Setting\All users\Application Data'
   -cp C:\Program Files\SAP\JDT\eclipse\SAPStartup.jar com.sap.ide.eclipse.startup.Main
   -os win32
   -ws win32
   -arch x86
   -feature com.sap.java.ide
   -showsplash C:\Program Files\SAP\JDT\eclipse\SAPIde.exe -showsplash 600
Any idea why I get this error and how to fix it. My Netweaver Developer studio did startup few times and I did write some code in it. But now when I try to start NDS, I get the above error.
Any help will be appreciated.
regards,
Mandar

Trial version of SAP J2EE engine and Development environment for Windows

Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.

Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir

Error when starting SAP J2EE Engine Log Viewer Service

Hi,
I'm running SAP EP6 SP14.
I need to make the default trace log file on the WAS Server (Windows) available to the developer's. For this goal, I am attempting to install and start the SAP J2EE Engine LogViewer Service on the WAS. I think I have configured the service.ini file appropropriately. When I register the service, I get a successful message that the service has been registed. The service even shows up in the Windows Service Manager.
However, when I attempt to start the service, the process fails after a 4-minute attempt. I eventually get an error popup saying
"Could not start the SAP J2EE Engine Logviewer service on the Local Computer"
"Error 1053: The service did not respond to the start or control request in a timely fashion".
The service shows as "starting" until I reboot the WAS.
The logviewer.bat runs fine on the WAS itself.
I can also connect from the client to the WAS thru the J2EE connection, but that requires the admin password. I'd rather get this approach to work.
Regards,
Kevin

Hi,
I have the same error during starting the service. How did you resolve that error?
Regards
Sabine

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Issue in Communication of SAP R/3 6.4C with SAP J2EE Engine 6.40.

Hello,
We have an application deployed in SAP J2EE engine 6.20. From SAP R3 (SAP R/3 version is 6.4C), We are communicating to the application deployed in SAP J2EE Engine 6.20 using RFC protocol. EJB module (Deployed in SAP J2EE Engine 6.20) which is being invoked from a Function Module using RFC protocol has the same name as the Function Module name. We were able to communicate to SAP J2EE Engine 6.20 this way.
Currently, I have deployed the same application in SAP J2EE Engine 6.40. I have followed the same procedure which i have used while depolying and working with SAP J2EE Engine 6.20. But, it is not working, and i was not able to communicate to SAP J2EE 6.40, the same way i did in SAP J2EE Engine 6.20.
Please let me know whether the procedure for communicating to SAP J2EE Engine 6.40 has changed in comparison with SAP J2EE Engine 6.20.
Also,Any pointers regarding RFC and JCO implementation in SAP J2EE Engine 6.40 willl be helpful.
Thank you.
Regards,
-Shabir Rahim.

Hi,
compare to 4.7
1.New ABAP editor added like if u write code in abap editor ,using if coditions and select statments it automatically shows the link endif, like if .. endif,select ...endselect.
2.New abap debugger compare to the classic debugger.
3.DBACOCKPIT
Missing indexes of various database tablesu2019 and the transaction to reactivate all the missing indexes is u2018DBACOCKPITu2019. Below is the screenshot of the transaction DBACOCKPIT.
Regards,
Madhu

Regarding RFC Communication from SAP R/3 to SAP J2EE Engine 6.40

Hello,
     We have an application deployed in SAP J2EE engine 6.20. From SAP R3 (SAP R/3 version is 6.4C), We are communicating to the application deployed in SAP J2EE Engine 6.20 using RFC protocol. EJB module (Deployed in SAP J2EE Engine 6.20) which is being invoked from a Function Module using RFC protocol has the same name as the Function Module name. We were able to communicate to SAP J2EE Engine 6.20 this way.
     Currently, I have deployed the same application in SAP J2EE Engine 6.40. I have followed the same procedure which i have used while depolying and working with SAP J2EE Engine 6.20. But, it is not working, and i was not able to communicate to SAP J2EE 6.40, the same way i did in SAP J2EE Engine 6.20.
   Please let me know whether the procedure for communicating to SAP J2EE Engine 6.40 has changed in comparison with SAP J2EE Engine 6.20.
Also,Any pointers regarding RFC and JCO implementation in SAP J2EE Engine 6.40 willl be helpful.
Thank you.
Regards,
-Shabir Rahim.

Hello ,
      The Connection in sm59 is established successfully> there were no Error thorwn in SAP when testing the connnection. But when i am making background call using a Function Module in SAP R3, the calls reaches Application deployed in SAP J2EE Engine 6.40, But it is failing with the error as,
#1.5#005056A24413003C000000240000126000042853BD899290#1170240034258#/System/Server##com.sap.engine.services.dsr####sstra902_IPC_2629150#Guest#6813e650a93f11dba9f5005056a24413#Thread[JCO.ServerThread-1,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/System/Server#Plain####
#1.5#005056A244130042000000000000126000042853CFDB80F8#1170240341655#/System/Server##com.sap.engine.services.dsr#Guest#2####322aaa71b11811db85e1005056a24413#SAPEngine_Application_Thread[impl:3]_36##0#0#Error#1#com.sap.engine.services.dsr#Java#DSR_36#com.sap.engine.services.dsr.res.DSRResourceBundle#Error while taking over external passport null#1#null#
#1.5#005056A244130042000000030000126000042853CFDB86BD#1170240341671#/System/Server##com.sap.engine.services.jndi#Guest#2####322aaa71b11811db85e1005056a24413#SAPEngine_Application_Thread[impl:3]_36##0#0#Info#1#com.sap.engine.services.jndi#Plain###Incorrect name parameter rfcaccessejb//DCEUR/Z_AIS_IPC_CFG_PRICE in naming operation.#
#1.5#005056A244130042000000040000126000042853CFDB8745#1170240341671#/System/Server##com.sap.engine.services.jndi#Guest#2####322aaa71b11811db85e1005056a24413#SAPEngine_Application_Thread[impl:3]_36##0#0#Info#1#com.sap.engine.services.jndi#Plain###Incorrect name parameter java:rfcaccessejb//DCEUR/Z_AIS_IPC_CFG_PRICE in naming operation.#
#1.5#005056A24413003C000000280000126000042853CFDBC4AA#1170240341686#/System/Server##com.sap.engine.services.dsr####sstra902_IPC_2629150#Guest#6813e650a93f11dba9f5005056a24413#Thread[JCO.ServerThread-1,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Error#1#/System/Server#Plain####
Here, //DCEUR/Z_AIS_IPC_CFG_PRICE is the Funcrtion module name in SAP R/3 6.4C.
Also Please let me know whether is there any Operating Differences between WAS 6.20 and WAS 6.40, for JCO/RFC based Communication( ie Comunicating with WAS 6.40 from SAP r/3 using RFC Protocol). Any materials and Information on how to work on SAP J2EE Engine 6.4 will also be very helpful.
Thank you.

Bank Guarantee Process and Configuration

Hi Gurus,
Can you help me with standard Bank Guarantee Process and Configuration in SAP.
Rgds,
Harmees

Hi Bhanu,
Please try out this link too , as it may help you :
http://help.sap.com/saphelp_46c/helpdata/en/3d/72369adc56d11195100060b03c6b76/frameset.htm
Thanks,
Dhruv Kumar Malhotra

Need documentation on IXOS Archive Administration n configuration with SAP

Could someone send me some step by step documentation on IXOS Archive Administration and configuration with SAP. Would be really appreciative cause i need to start this work immediately in my company.

Hi
This is a Link with all IXOS documentation on Sap Market place
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000717302&_SCENARIO=01100035870000000202&_OBJECT=011000358700001866282008E
It can be found on http://service.sap.com --> Release and Upgrade Info --> Installation and Upgrade Guides ---> SAP Solution Extensions -
> SAP Archiving by Open Text
Greetings
Jose Luis Valverde

How to install license for expired SAP J2EE engine?

Hi,
I had used evaluation copy of the SAP J2EE engine. This copy works for few days and now the SAP J2EE engine is stopped. After its expiration, we purchased the permanent license.
My question is: <b>how to install license for the expired SAP J2EE engine so that the engine can be started without re-installation?</b>
Waiting for the reply.
regards,
Anand

Dear Anand ,
To install license of the J2EE Engine :
In the Visual Administrator -> Server 0 -> Services -> Licensing Adapter. Then choose tab page Runtime -> Installed Licenses and Install subsequent temporary license.
check the URL for further details :
http://help.sap.com/saphelp_nw70/helpdata/en/14/5e533e5ff4d064e10000000a114084/frameset.htm
Hope this will help you resolve issue .
Regards ,
Santosh

ECLIPSE Plugin for SAP J2EE Engine 6.2

Hi,
I got my eclipse 2.1 installed on my local laptop and i got SAP J2EE Engine 6.2 working on my laptop now if i want to debug the application i need a plugin in eclipse which will make me to run my application on WAS through Eclipse then i can debug the code can some help me in this issue ??????????, If someone has already a plugin available with u can send it to my email id :- [email protected] along with the steps to install the plugin
Thanks verymuch in advance.

> hi
> good
>
> go through this link
> http://www.sap.com/platform/netweaver/components/devel
> operstudio/index.epx
> http://dev2dev.bea.com/pub/a/2005/09/eclipse_web_tools
> _platform.html
> http://www.sap.com/solutions/netweaver/pdf/50052038.pd
> f#search=%22EXECUTE%20WEB%20APPLICATION%20SERVER%20USI
> NG%20ECLIPSE%20%2C%20SAP%22
> http://help.sap.com/saphelp_nw04s/helpdata/en/42/dfc3b
> b607a6ffbe10000000a1553f6/content.htm
>
> thanks
> mrutyun^
None of those links have anything to do with the original question... What was the point?!
Sap Guy, what is the reason for having to use Eclipse? Is it a corporate standard or some sort of requirement from other software you are using?
Gareth.

Problem while extending and modifying the ISA B2B app on SAP J2EE 6.4

We are facing some problem with extending and modifying the ISA B2B 4.0 application.
First Let me clarify you the whole scenario.
Previously we had ISA B2B 4.0 SP03 deployed on SAP J2EE 6.20 Engine.
We had used eclipse 3.0 to extend and modify the application as NWDS does not support SAP J2EE 6.20.
We had used ant buildtool to build the modified application which comes along with the ISA Software Archive.
We had successfully done all the modifications and application was running fine...
Now we have upgraded the overall J2EE infrastructure and using J2EE 6.4 Engine which supports NWDS.
We have successfully deployed the ISA B2B application which comes along with the Support Package.
We are using Support Package ISAWAC40SP11P_7-20000529.SAR E-Selling 640. The application is working fine after all
the configuration done in XCM and SAP CRM 4.0 system.
Now for modification and extension i have created another b2b enterprise archive with name "b2b_client.ear" using ant buildtool.
I've done the modification and extension .. added some Z classes and JSP pages. Now when i try to deploy the application using
SDM 6.40, I got an error message stating
<b>"com.sap.sdm.util.sduread.IllFormattedSduFileException: The archive must be deployed with a 6.20 SDM, which has a SDM-SDA compatible version 1 or greater."</b>
I think this error is due to the incompatible sda_build.xml used in the build process but we have used the same xml file bundled with the above mentioned ".sar" file..
Please help or suggest someone who can help me out from this...
Thanks & Regards.
Sandeep Solanki

Hi Alkis.
First, you need to specify the fully qualified class name of your based-RequestProcessor class in the config.xml file like
<controller contentType="text/html;charset=UTF-8" locale="true" nocache="true"
processorClass="com.mycompany.struts.framework.MyRequestProcessor"/>
If you review the source code of the ActionServlet and RequestProcessor classes, you can see that overwritten methods (by you) are executed every time the client makes a request to the struts based application.
I hope you can run your approach. And it will be excellent you can shared how you will do it.
Kindest regards.

Housekeeping and configuration of SAP J2EE

Similar Messages

Maybe you are looking for