How a clustered weblogic environment handles orders balanced-wise??

Hi,
In a 2 managed clustered weblogic environment with OSM 7.0.3 and an external load balancer to balance the incoming traffic it is noticed from the managed servers that whichever server is scanning for orders and that is understood by the server's logs:
####<Oct 16, 2012 2:54:33 PM EEST> <Info> <oms> <> <osm_ms01> <Timer-9> <oms-internal> <> <fab6ae59fd53672b:704b5627:13a64686216:-8000-0000000000000010> <1350388473505> <BEA-000000> <cluster.ClusteredHandlerFactory: Querying for high activity orders across the cluster>
is the server that will serve a new order.
Is there a way to achieve a perfect load balance? In a test case of 200 orders all orders where processes by one node and it is the one that scans for new orders.
We configured the external load balancer to split the traffic..But nothing!! Is there an internal mechanism that gathers all orders that are send to multiple servers and executes them in the server that is currently scanning for orders ???
Is there in any manual or Oracle Support Document/note on how is decided in a multiple-clustered environment which server will execute orders???
Thx in advance!

Hi Alexandros,
Here's some general information on load balancing:
1. With OSM order affinity, the managed server instance that receives the order (precisely, creates the OSM order) has sole ownership of the order. Other than specific circumstances, the ownership is not transferred, and thus processing of that order stays with that instance till completion.
2. The OSM web service (createOrder API) has no load balancing mechanism internally if HTTP is used as the transport. So if you only send orders to one managed server, that instance will create and thus own all these orders. In contrast, if you use JMS as the transport, it is load-balanced by the JMS distributed destination (provided you are not sending instead to member queues of the distribution destination).
Now, assuming you are using HTTP, you need to ensure that the Load Balancer is really round-robining on the 2 managed servers among HTTP messages of order submissions. Monitor your TCP pipes to verify.
A problem we've seen, is if you are using SoapUI with pre-emptive authentication disabled, the SOAP request without pre-emptive authentication will be rejected, causing a re-send. Because of LB, all orders ended up in one managed server, as the reject-then-accept SOAP message sequence becomes cyclic with odd-even round-robin. So, enable pre-emptive authentication to avoid that.
Btw, is your cartridge handling high-activity orders? If not, I have a suspicion that your pasted log message may be a red-herring.
Cheers,
Daniel Ho
OSM Product Management

Similar Messages

How to update weblogic.properties in order to support English & Chinese

<URGENT PROBLEM>
hi,
how to update weblogic.properties in order to support English & Chinese
version in a sing weblogic server?
Thanks in advance
<URGENT PROBLEM>

If you are using JSP as your mechanism for content display, you should use
the contentType parameter to specify the character and coding of the JSP
page any character encoding of the resulting stream. So far, we have not
done a good job of documenting how to produce localized content in JSP. I
have filed an issue for the documentation folks to work on it. For now,
take a look at section 2.7.4 of the JSP specification version 1.1.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:8ffr11$59d$[email protected]..
<URGENT PROBLEM>
hi,
how to update weblogic.properties in order to support English & Chinese
version in a sing weblogic server?
Thanks in advance
<URGENT PROBLEM>

Load balancing, failover and fallback in Non-Clustered WebLogic environment

hi,
Has anyone implemented WebLogic 10.3.3 (or 10.3.4) in a Non-Clustered environment, but also got load balancing, failover and fallback work?
We were successful in getting failover working using t3://server1:7001,server2:7002 provider URL, but not load balancing or fallback.
The fallback is working when it was connecting to server2 and if we kill server2, then it switches to server1, but not when server2 is still running while server1 comes back.
All we need to find a way to enforce fallback to primary site, even if secondary which the client connected is still up and running and primary site comes back.
Any help appreciated.
Thanks.
Best regards,
Bala

hi,
Has anyone implemented WebLogic 10.3.3 (or 10.3.4) in a Non-Clustered environment, but also got load balancing, failover and fallback work?
We were successful in getting failover working using t3://server1:7001,server2:7002 provider URL, but not load balancing or fallback.
The fallback is working when it was connecting to server2 and if we kill server2, then it switches to server1, but not when server2 is still running while server1 comes back.
All we need to find a way to enforce fallback to primary site, even if secondary which the client connected is still up and running and primary site comes back.
Any help appreciated.
Thanks.
Best regards,
Bala

Apex Listener and Clustering - WebLogic Server

Has anybody worked with the apex listener on a clustered WebLogic environment with a load balancer? We are having lots of connection issues, and I am wondering if this could be part of the problem.
Thanks,
Michelle

Someone Kindly try to give me reply for my issue .
Thanks& Regards,
Nitesh pareek.

Load Balancing in Clustered Weblogic 12c

Hi,
Weblogic.........: 12.1.3
OS..................: Oracle Enterprise Linux 6.3
We have configured a Clustered Weblogic (2 virtual servers) successfully. Now we are searching for some good Load Balancing solutions. I've tested a ProxyServlet, but it didin't really solve the question, because this kind of load balancing only balances apps in the same server.
Is it mandatory to use a third-party solution, like an Apache Httpd Server, or Big IP? In fact, i would like to know initially for some viable solutions to provide a load balancing solution to a 2-server Weblogic 12c Solution.
Thanks in advance.

Hi,
It is not manadatory, and it is possible to load balance apps on different servers with the ProxyServlet. It's only that this will be running on a server from where the others need to be accesable.
Also, it depends on what you are using this environment for. The ProxyServlet is a good solution if you want to replicate an Enterprise environment and test the load balancing with a WebLogic cluster. However, if you want to run Production applications in this environment, then consider the above suggestions: either a WebServer or a dedicated external Load Balancer.
Regards

HT5622 I have 0.04$ in my balance. How can i spend them in order to change my store?

I have 0.04$ in my balance. How can i spend them in order to change my store?

Click here and request assistance.

Patching/updating Java Applications in the WebLogic environment.

Hi All,
I'd like to get some feedback on our process and hear if there is some better/different
ideas out there on how to handle patching/upgrading java applications in the WebLogic
environment.
Here is our process:
1) We build using ANT our Enterprise application.
2) We deploy our application using InstallAnywhere to drop the structure into
an environment.
If a patch or update is needed, we again build the Patch/Update using ANT, generating
checksums for each file in every ear/war/jar file as well as any supporting files
(.xml, .properties, .sh, etc.) used in the production structure. We then compare
checksums against what is in production and come up with PATCH_(ear/war/jar) files
with only the changed classes and duplicate production structure with the changed
supporting files.
Using ANT scripts and InstallAnywhere, we backup the files to be replaced in production,
overwrite supporting files, extract packages (ear/war/jar), overwrite classes
with new ones, re-package the ear/war/jar files into production environment and
restart the server.
We patch at a class level due to the configuration settings internal to the package
files (ear/war/jar) that we don't want the customer to have to re-configure everytime
we do a partial release.
Right now, the whole process is automated except the creation of the Patch ANT
script that extracts, overwrites updated classes, updates manifests, then re-packages.
Any ideas on improvements or complete re-engineering of our process to help so
we can get closer to 100% automation?
Thanks,
John

The chances of two applications running at exactly the same time are miniscule. If they each have a connection to the database, and are both trying to modify the same table, then chances are one will be slightly after the other its changes would be committed last. In the case where one might delete a row just before another tries to access that row, you're going to have some sort of problem. However, those circumstances are pretty rare, and even so, some small amount of exception handling can deal with them gracefully.

How to set WebLogic Plug-In Enabled through admi in weblogic server 9.2

Hi,
how to set WebLogic Plug-In Enabled parameter for cluster through admin console in weblogic server 9.2 ???
Actually i could able to find the option for individual servers. However i could not able to find the same for cluster??
is it through only by WLST ???
can any one please advice??
regards,
Praveen Kumar J

Well, I don't know what you call a "BEA Admin", but please note that everyone here is trying to help.
Some of them are not working for BEA but are deeply efficient.
Well, for your problem, I started a 9.2.2 domain, created a cluster and found the "WebLogic Plug-In Enabled" option ...
In your console, in the "Domain Structure" window, click myDomain \ Environment \ Clusters
Then in the main page, you've got "Settings for myCluster".
On the very first page, "Configuration > General" tab, you should have the folliowing attributes :
* Name
* Default Load-Algorithm
* Cluster Address
* Number of Servers In Cluster Address
Go at the bottom of the page and under the last link "Number of Servers In Cluster Address", you have a little "Advanced" link in blue. Click on it and it will expand another part of the page.
In that new part, you'll find new attributes and the one you're expecting.
This time, it should definitely help.

Open Sales Order Balance incorret

Dear All,
When you copy a Sales Order to an AR-Invoice and then increase the line quantity on the AR Invoice, the Open Sales Order Balance on the Business Partner Master Data shows a negative amount.
E.G.
Sales Order 10 Chairs @ R1000 = 10000 (Open Sales Order balance in bp master = 10000)
Copy to AR Invoice
AR Invoice 12 chairs @ R1000 = 12000 (Open Sales Order balance in BP maser = -2000)
When subsequent sales orders are added their is a - 2000 diff between the Sales order balance and actual open sales orders.
Can you please tel me how to correct this.
Best regards
Erika

Hi,
Please run the Query from the Note no. : 999124 and check whether the item in the sales order appears in the results obtained.
If yes then you need to log a support ticket to get your issue investigated.
Kind Regards,
Jitin
SAP Business One Forum Team

How can i reset my iTunes account balance ?

how can i reset my iTunes account balance ? in order to chnge my iTunes store .

Click here and request assistance.
(89693)

HOW CAN I GET THE PURCHASE ORDER RELEASE DATE

Dear All,
HOW CAN I GET THE PURCHASE ORDER RELEASE DATE - any reprot is there?
Thank you
Ahmad

Hi,
u goto that PO and select Environment on top line .under that select header changes if u click on that u will get entire details who reased when released, date , time etc
regards,
Srinivas Kona

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

Weblogic Unit Of Order on Javax.JMS

Hi I want to use Weblogic Unit of Order on Javax.jms and not on Weblogic.jms, does anyone know how to do that.

You need to use WLS JMS extension interface to programmatically set a Unit-of-order. In order for applications that use pure javax.jms interfaces to take the advantage of Unit-of-order feature, WLS allows administrators to enable unit-of-order via configuration. Once you enable Unit-of-order on a connection factory, all messages sent from one session will belong to the same unit-of-order either with a system-generated name or a user-generated name. In addition, you could enable unit-of-order on a per destination basis as well.
For details, please refer to http://docs.oracle.com/cd/E17904_01/web.1111/e13727/uoo.htm#i1040257.

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me

I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>

There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit

Customers Orders Balance is Negative

Hi guys,
We are running 2007A PL 37 and I have found a customer in our database that is showing an orders balance that is a negative figure when viewing on the main BP screen.
If you drill down into the orders, they all look normal and are all positive and the running balance is correct, its just the total shown on the front screen is completely different and negative.
Any idea what may have caused this and how to rectify?
Thanks in adavance.
Michael

Hi,
You can query the OCRD table and find out other BP's with negative order balance.
If your order balance as per the open orders does not match the balance displayed on the BP Master screen, then you need to contact support to get the issue fixed.
You can log a message to SAP Support throught Portal using the S-User ID.
Regards,
Jitin

How a clustered weblogic environment handles orders balanced-wise??

Similar Messages

Maybe you are looking for