How a new output message will be created automatically after changing a PO?

Dear friends,
How to generate a new output message automatically after changing a PO and saving it?
Thx & Regds
Amitava

Hi,
System only takes automatically the Output message in PO in creation mode in ME21N ( Only if you have maintained the condition record MN04)
If you have not maintained Condition record in creation of PO also you need to maintain manually.
But once you changed the PO system will not automatically pick up the new Output message, you have to manuallly input the Output messages in change mode of PO - ME22N.
You can also use ME9F for this.
rgds
gsc

Similar Messages

How many tempdb mdb files will be created in this case?

How many tempdb mdb files will be created in this case?
SQL Server detected 2 sockets with 6 cores per socket and 12 logical processors per socket, 24 total logical processors; using 24 logical processors based on SQL Server licensing. This is an informational message; no user action is required.
I have sql server 2012 enterprise edition 64 bit
Thanks

Its all upto your server usage and number of processors,
Note : If the number of logical processors is greater than 8, use 8 data files and then if contention continues, increase the number of data files by multiples of 4 (up to the number of logical processors) until the contention is reduced
to acceptable levels or make changes to the workload/code.
For optimal performance, you could add data files of the same size to tempdb up
to the # of processors on your server. So a 4 processor server should have 4
same-sized physical files for tempdb for optimal tempdb performance. The reason
you want the files to be the same size is because SQL Server tries to keep the
files filled to the same proportion. So if you had a 100MB file and a 200MB
file, SQL Server will try to keep them at the same fill level, for example 50%,
which means that the 200MB file will be written to approximately twice as much
as the 100MB file which reduces the performance gained by having multiply
files.
Please read this below links just for your reference.
http://support.microsoft.com/kb/2154845/en-us
http://blogs.msdn.com/b/sqlserverstorageengine/archive/2009/01/04/managing-tempdb-in-sql-server-tempdb-configuration.aspx
http://www.sqlskills.com/blogs/paul/a-sql-server-dba-myth-a-day-1230-tempdb-should-always-have-one-data-file-per-processor-core/
Raju Rasagounder MSSQL DBA

No Output message to PO generated automatic from GR posted

Hi MM Experts
I have a problem on output message for PO generated automatic from GR posted. I already maintain output condition of the PO. It works fine when I create or change a PO manually.
Back to my problem, I must go to tcode ME22 or ME22n first of the PO generated auto to get the output message. Please share your experiences on how to get the output message for PO generated auto from GR posted.
Regards
Hengki

If you have deleted the config settings in the Fine Tune control of the message types than system should not trigger the change output but for existing PO it might so create the new PO and than try to change becuase may the PO is already exist and you have deleted the config that's the reason it still generating change output
also try to remove the config for PO change relavant field in OMFS
remove check mark of first column for EKKO and EKPO and try

How to enforce the message "Do you want to save changes?"

Hello,
How to enforce the message "Do you want to save changes?" when the user attempts to close a form after checking a non-database item (check-box).
All the other database items in the block are not updateable and only viewable.
After checking the non database item check-box, if the user tries to commit, then the system is saving the changes and call the appropriate procedure on save.
But if the user tries to close the window without committing, the form is not showing the message "Do you want to save changes?" since the check-box is a non database item.
How to enforce the message "Do you want to save changes?" in this scenario when the user tries to close the window?
Thanks in advance.
Cheers
Sri

This is a fairly common question in the forum. You will need to override the default exit form process and check to see if the checkbox is checked. You can do this in the Key-Exit trigger. For Example:
DECLARE
al_id     ALERT;
al_button NUMBER;
BEGIN
IF ( CHECKBOX_CHECKED('YOUR_BLOCK.CHECKBOX_ITEM') ) THEN
     /* Display an Alert here that asks, "Do you want to save changes?" */
     ...code here to set the properties of your alert...
     al_button := Show_Alert(al_id);
     IF ( al_button = ALERT_BUTTON1 ) THEN
        --YES
        /* Perform COMMIT Processing here...*/
     ELSIF ( al_button = ALERT_BUTTON2 ) THEN
        --No
        Exit_Form(NO_VALIDATE);
     ELSE
        --Cancel
        RAISE Form_Trigger_Failure;
     END IF;
ELSE
     Exit_Form;
END IF;
END;If you need more help with the Alert, please check out the SHOW_ALERT topic in the Forms Help.
BTW, what happens if all the user does is check the checkbox? No other changes have occured. What changes are you trying to process?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Whether a Recovery-partition and its all contents will be created automatically..?

Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?

Gennady Abakyan wrote:
Please tell me whether a Recovery-partition and its all contents will be created automatically when I install Mac OS X 10.7 on a fully formatted new hard drive?
Usually, but there are some conditions that can prevent it. See "Some features of Mac OS X Lion are not supported for the disk (volume name)" appears during installation.
So, I get exactly the same (hidden) Recovery-partition on my Mac mini 2011 as from the store if I delete the hard drive current partitions scheme and create a new scheme with an only one (bootable) partition?
You can't do that, at least not from the Mini, while you're runing from it.
You can, however, remove and/or resize partitions in most cases. See #4 in Using Disk Utility.

If I help out a friend & download a free app (through my iTunes account) on their new iPod Touch, will their device automatically be added to my itunes device list (and they can see all my contacts, pix, music etc)?

If I help out a friend & download a free app (through my iTunes account) on their new iPod Touch, will their device automatically be added to my itunes device list (and they can see all my contacts, pix, music etc)?

Just wondering, what context is this in?
First up, is your iTunes account part of an iCloud account?
Secondly, if it's a free app, why don't they just download it? If they are having trouble finding it on the App Store, but you can find it easily, you can share the link for it via email with them, and if they view that email on their iPod they can just tap the link and it will open the App Store to that App for them, so they can download it themselves.
If you were to go to the Store settings pane and sign in with your iTunes account, that should only provide the possibility for download items from your iTunes account, such as purchased apps, music and movies. However, if you signed in, downloaded the app, and then went back and signed out of the account again, there shouldn't be any access apart from the app you downloaded. This is provided you sign in using the Store section of the Settings app, not the iCloud section.
One problem they will have if you download this in your account instead of theirs, in order to download updates for that app, they will need you to enter your iTunes password to download the updates. Doing that doesn't give them access to anythign to do with your account other than that update, but they will be unable to receive updates for it without your password. They would also likely be unable to sync the app onto their computer, as their computer would not be Authorised with your iTunes account.
If you can answer some of the questions I've asked, I may be able to suggest alternate ways for you get them the app on their device.
Hope this all helps a bit

Canon 4000 IS troubleshooting lens error message will shut off automatically restart.

canon 4000 IS
lens error message will shut off automatically restart.
Does not resolve itself.

Hi Lidmar,
First, please try this: Remove the battery pack from the camera and close the battery compartment. Now Press and hold down the power button for 5 seconds. Replace the battery pack and turn the camera on.
If your camera works normally, you're ready to start shooting. If the issue persists, we recommend that you send your camera in for service. You may arrange service for your camera here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi my name is Catherine I have downloaded digital editions and a book to my PC but wish to read this on an iPad. I have downloaded Digital Editions on the iPad and don't know how to authorize it. Will the book automatically download onto the iPad once tih

Hi my name is Catherine I have downloaded digital editions and a book to my PC but wish to read this on an iPad. I have downloaded Digital Editions on the iPad and don't know how to authorize it. Will the book automatically download onto the iPad once tihis is done and I open my account on the iPad?

YOu can also use Bluefire Reader for reading books that need an Adobe ID. There are several ways to transfer a book to your iPad. One way is to email the acsm file, open the email on the iPad, and "Open in ... ". Another way is to use an app like Dropbox. The third way is to connect your iPad to your computer, open iTunes, select the iPad, and under Settings select Apps. Scroll down to the File Sharing apps, select the app you want the book on, on the right select Add, navigate to where the book is on your computer, and select it. Open the app on your iPad and it should load.

Messaging Server/UNIX: Starts automatically after installation

How can I configure Messaging Server to run automatically on startup?

In most cases, Messaging Server for UNIX will run at startup automatically.

Most UNIX systems have a start script that includes a line that starts sendmail
as a server (/usr/lib/sendmail -bd) automatically.
Howver, when Messaging Server is installed, it replaces several mail utilities (mailq,
processq, and sendmail), with links to our sendmail binary
(<ServerRoot>/bin/msg/admin/bin/sendmail).
Therefore, Messaging Server, rather than sendmail, starts when
your system starts.

This can be confusing to administrators of other Netscape servers since
most other Netscape servers are not installed to start automatically.

Note:

This does not take effect until the system is fully restarted. After
installing Messaging Server, restart the system before attempting to start
Messaging Server. Sendmail is usually already running, and the installer does
not kill the sendmail process.

If you start Messaging Server without
restarting, smtpd will not start due to a port conflict.

Hi Leo, thank you for your help
This:
I have tried the suggestion above (clear the "Run task as soon as possible after a scheduled start is missed" checkbox) and it does the trick for me. However on the Home/Get Started/Set up screen the "Set up Server Backup" task is then reset to outstanding
while the .../Quick Status screen shows "Server Backup ON".
Is a working work around till a real update or hotfix is released

PO not created automatically after creation and approval of SC

Hi all,
We are using SRM7.0 Extended Classic Scenario.
We are able to create Shopping Cart successfully.
For items where a source of supply is not supplied, the Shopping Cart goes through the approval process and then into the sourcing Cockpit.
But for the other Shopping Carts, PO is not getting created automatically after the approval of SC.
Any ideas/suggestions on this issue would be highly helpful.
Thanks,
Priya

Priya,
Can you check this configuration in Sourcing for particular PCat?
*Automatic requirement grouping; sourcing for items without assigned*
source of supply:
Then run the report BBP_SC_TRANSFER_GROUPED which will automatically group requirements together for
the creation of a PO.
And, If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
Let us know if it works, and should help you this one.
Thanks,
Rahul Mandale

TS3992 my ipad has said to me that it hasn't been backed up in two weeks and it will do it automatically after i plug it in and connect it to wifi it would do it! but it has been two days and the screen has frozen the screen so i can't do any thing to sto

my ipad has said to me that it hasn't been backed up in two weeks and it will do it automatically after I plug it in and connect it to wifi it would do it!

Please try to make a "hard reboot" by holding down the home button + the power button (at the same time) for a few secons until it start rebooting.

I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

Will DB start automatically after rebooting the computer?

Will DB start automatically after rebooting the computer?

user9947478 wrote:
Will DB start automatically after rebooting the computer?Yes. IF you set it up to do so. Or you have an OSs for which it is installed to automatically do so and you have not disabled it.
I assume, since it seems to be difficult for you to tell us what operating system you use, that you use some form of Windows. In which case, the answer is 'Yes, automatically set up - as seen by the Services'.
(Windows users don't seem to realize there are other OSs and therefore don't tell. They also don't realize that Windows is not an OS, but rather the marketing label for a whole families of OS Editions. Some popular families are: Windows XP, WIndows 2003, Windows 2008, Windows 7. But even then, Oracle only works on specific Editions within the family.)

How to view Output Messages in the LabWindows UI?

In my LabWindows/CVI I would like to view the output messages that are sent from sequences:
"RunState.Engine.NewOutputMessage(Parameters.Message).Post()"
I thought there might be a TS UI Control like the one in the sequence editor called Output - but I can't find one.
So far I have managed to catch the message type (TS_UIMsg_OutputMessages) but I can't actually get the string from the event.
Does anyone have an example of doing this?
Thanks,
Ronnie
TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

Ok, let me see if I can explain how to do it more clearly then.
1) Create a new OutputMessages collection using TS_EngineNewOutputMessages(). This collection will store your own private copy of the output messages. You can hold onto and add to this collection if you want to store them. If not you can just close the handle to free it once you are done with it.
2) When you get the UIMessage you need to get the ActiveXData property of it. I think the CVI function should be called something like TS_UIMessageGetActiveXData(). The CAObjHandle you get back from this function is a different OutputMessages object that you should NOT hold onto (because of multithreading reasons), you should instead close the handle before returning back from your UIMessage handler. Before doing that though, you should use the TS_OutputMessagesCopyMessagesToCollection method to copy the messages from this OutputMessages object to the new one you created in step 1) above (i.e. you are making your own private copy of the messages and leaving the ones in the UIMessage unchanged (again, it is for multithreading reasons that it must be done this way to avoid race conditions).
3) You now have a copy of the output messages from the event in your own private OutputMessages collection that you created in step 1) above. You can now access it to get the info for the output messages. You can get the number of items it contains (and it might contain more than one), by using the TS_OutputMessagesGetItem() function and using CA_VariantInt(index) to package the integer that you pass for the index parameter.
4) Getting the item gives you an OutputMessage object (notice no plural). You can get information about the output message using the methods and properties of the OutputMessage class (see the online help for more info). There is more to an output message than just the message text. There is also a timestamp, category, location, icon, id, severity, color, etc.
If you need more information please let us know specifically what you are having trouble with or need more information about.
Hope this helps,
-Doug

Testing IMAP - how to make sure messages will be kept if I delete account?

I have always used POP, but right now I am testing an IMAP account (associated with what appears to be a quite efficient spam filtering mail service). I have NO experience at all with IMAP. And I need to clarify something before I start to experiment fully.
In order to test that IMAP account, I will forward to it mail of one of my main accounts during the next ten days, so it will be a real live test.
And here comes my question mark: suppose I decide, after ten days, not to continue and to cancel that IMAP account. What will then happen to the mail I have received on that account? I assume that all the mail in the IMAP Account folder will be canceled, right? If I move in the meantime mail received on that IMAP account in some folder outside the IMAP folder in Mail, will all the messages moved there be kept, or could they be deleted too?
Same question for outgoing mail sent through that IMAP account and server: will all the mail be kept, provided I move it out of the Sent Items section in the IMAP folder and put it at some other place?
Thank you for clarifications! It is obviously vital for me not to lose incoming and outgoing mail, even if I finally decide not to keep that account.
iMac G4 20'' & iBook G4 12'' Mac OS X (10.4.9)

Hi
IMAP accounts differ from POP accounts in that mail is held primarily on the server. Mail clients, like Apple Mail, will download copies of them, but will stay in sync with the server, so if you "delete" mail from what appears to be a "server-based" folder in Mail, it will be likewise removed from the server. You can, of course, create purely local folders/mailboxes and move your messages into these, in which case they will be totally unaffected by changes in your mail account. When you create a new mailbox, Mail will ask you whether you want to create it locally ("On My Mac") or within an existing IMAP account (in which case it will exist on the server).
But because of this local download of mail, even if you cancel your IMAP account, you will actually still have copies of everything in Apple Mail. It's not until you delete the account itself from within Mail's preferences that the local email will be removed.
Matt

How a new output message will be created automatically after changing a PO?

Similar Messages

Maybe you are looking for