How add a watermark to the smartform page

Hi All,
Can anybody give me some pointers, how to add a watermark to the page .
I have to display a water image, when the user trying to see print preview.
I.e. on certain condition i need to print the water mark on the page .
I have uploaded the BMP Image from se78,
In the page, background picture i have added the image. But some how itu2019s coming for me in the foreground only. Where it was supposed to come as background picture.
I have read some where only the grayscale type image only can come as background picuture.
I have trying to upload grayscale type image, but its not allowing from se78.
Thanks in advance

hi,
Yes you can add back ground picture based on a condition,
Or you can dynamically decide which water mark shall appear based on a condition.
You need to implement respective logic.
In the INITIALIZATION of global data assign the image name that should prior appear.
Later, in the CODE of a page, reassign the image name with respect to a condition. But make sure the assigning is done well before a new page is triggered else, that page would continue with the image you mentioned in the INITIALIZATION.
Suppose the design such that, the page shall contain 10 items, with a image that varies with following page with same number of items.
In the page, start a counter and track for the number records once the counter is 10, assign the image name.
As soon as 10 records are printed, a page break is triggered and also a new image assigned to that page.
Regards
Sharath

Similar Messages

  • How do I delete just the first page of a document?

    A long time ago (2005) I made a document over 200 pages long - and now I need to edit it, specifically to delete the first (empty) page of the documet, so when I add a separate cover, the first page will be on the right, where it should be. I shall also need to edit/change the page numbering and TOC to match. It has been so long since I used Pages that I don't remember how to do this.
    I tried selecting the first page in the sidebar vertical list of the pages and hitting the Delete button (or using the menu option) but this seems to want to delete the entire document, not just the selected page.
    I know this sounds simple, but I can't figure out how to do it. Pages Help just says to delete the content, but there is no content on the page.

    Either you have a lot of Pages breaks which you can delete or you have aded a Pages break which you also can delete. Turn on the invisible characters View > Show Invisibles. You will see blue characters.

  • Add Notification Worklist to the Home page for a responsibility

    Hello All,
    How do you add Notification Worklist to the Home page for a responsibility?
    Thanks,
    Bradley

    Query the responsibility that you want to add the worklist to get the menu associated to it, then query up the menu and add the Advanced Workflow Worklist function to the menu along with a prompt like Worklist.

  • How do you shut off the opening page of Mozilla's new features?

    im getting really pissed off not being able to stop 2 pages from opening when i click on my firefox browser. one page which I want to open up is my yahoo.com page, the other is your new mozilla add ons page. its annoying and im about to stop using Mozilaa because of it. its ridiculous that we can stop it from loading everytime I open my browser. ive tried so many things to stop it. please help and thank you for your time
    kevin

    Do you mean the regular Add-ons page (the one that opens when you press Ctrl+Shift+a) or a page for a specific add-on?
    Do you get the unwanted page when you launch a new window (Ctrl+n)?
    If so, that can indicate either:
    * Your settings list two home pages. These articles will help in clearing that up:
    ** [[Startup, home page and download settings]]
    ** [[How to set the home page]]
    * One of your add-ons is showing the new page.
    If the extra page does NOT appear in a new window, could you test using your Firefox desktop icon a second time without closing Firefox? This should launch a new window.
    If THAT new window has the unwanted page, your Firefox shortcut might be hacked. You can check by right-clicking it > Properties > Shotcut tab. The Target for 64-bit Windows 7 should be no more and no less than the following:
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    If THAT new window does NOT have the unwanted page, Firefox may be showing a "one time" page and failing to record that it has showed the page, so it keeps doing that one time action at every startup. Have you noticed Firefox having problems remembering any other settings changes? This article has a range of suggestions for addressing this kind of issue: [[How to fix preferences that won't save]].

  • HT4400 how do you advance to the next page with focus 40 blue

    how do you advance to the next page with focus 40 blue

    Hello,
    To place your own images for previous and next button you need to use the fill feature. Please check the steps below:
    1. Go SlideShow options and Uncheck Edit Together.
    2. Select the next button and click on Fill to open Fill panel.
    3. Click On Add Image and select the image you want to use. Also select the fitting type as "Scale to Fill" or "scale to Fit "and Position as "Center".
    4. Do the same for previous button.
    Regards
    Vivek

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • How do I programmatically reference the current page in 902?

    Hello,
    How do I programmatically reference the current page in 902?
    The Portal Smart Text option for Current Page is not flexible enough, and I wish to create my own custom greeting using PL/SQL.
    Cheers,
    John

    hi,
    If you are developing a PLSQL Portlet, then you do have a way for getting the page URL.
    The page URL can be obtained from the record, portlet_runtime_record. There is a filed page_urlavailable with portlet_runtime_record.
    The portlet_runtime_record is passed as a argument to the show_portlet procedure.
    --Sriram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to get rid of the Login page in Portal?

    Hi Guys,
    I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
    Russel

    Hi Russel,
    You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
    Check the access tab for pages and the manage tab for applications.

  • How do I get to the start page when I'm not on it currently? there used to be a buttom for it

    I recently updated to version 6.0.2 of Firefox. This version doesn't seem to have a "home page" button. How do I get to the home page when I'm currently not on it? I shouldn't have to press the "backpage" button until I get there or type it in to get there.

    You can find the toolbar Home button at the far right end of the Navigation Toolbar.
    You can drag the Home button from its current position at the right to the previous position at the left of the location bar if you do not like that new position.
    * http://kb.mozillazine.org/Toolbar_customization

  • How do I get to the home page of itunes for IPAD to see my account and my apps?

    How do I get to the home page of itunes to see my account and the apps installed onmy Ipad or Ipod?

    Recovery Mode Step by Step
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    On Computer
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. iPad Recovery Mode on computer screen
    8. Select "Restore iPad"...
    9. Select "Restore and Update"
    10. Extracting Software.
    11. Preparing iPad for restore.
    12. Waiting for iPad.
    13. Verifying iPad restore...
    14.Restoring iPad software.
    15. Verifying iPad software.
    16. Verifying iPad Restore...
    17. Restoring iPad firmware...
    18. Your iPad is restored to factory settings; keep iPad connected to computer
    19. Activate iPad
    20. Enter Apple ID and Password
    21. Continue
    22. Welcome to Your New iPad
    (a) Set up as new iPad   (b) Restore from this backup (select from list of backups)
    23. Restore from this backup
    24. Continue
    25. Restoring iPad from backup
    26. The settings of your iPad have been restore; keep iPad connected to computer
    27. Syncing iPad (Step 1 to 5)
    28. Preparing apps to sync
    29. Copying 1 of 9
    30. Sync apps, movies and music to iPad
    31. Finishing syncing
    32. Eject iPad

  • How to create links to the same page, how to create links to the same page

    How to create link to the same page with iweb?
    Thanks

    You're referring to anchors.  There are a couple of ways. These topics discuss them:
    iWeb FAQ - Anchors
    How do i hyperlink to certain portion...: Apple Support Communities
    OT

  • How to get data on the next page in case of templates if data is more ?

    please tell me how to get data on the next page while i m using template in my first page , if data is more howw it can be displayed on the next page ?

    HI Asim,
    template is fixed we  it can't be expand . u can better to use table line it can automaticlly expending if data is more ... u can create one more page like page 2 and create a window for entire second page ..then assign it in first page (next page page2).
    regards
    kiran kumar.

  • How to achieve SUBMIT for the current page when I click other tab?

    Problem: How to achieve SUBMIT for the current page when I click other tab?
    Description: I have a two-page application and each page associates with a tab. Say page1 associates tab1 and page2 associates tab2. In each page, I have a submit button, a after submit process associated to the submit button, and a tabular form. For page1, I fill out the fields and hit the button. The page1 will appear again and I can see the data I have insert. However, If I fill out the fields and click the tab2 (page 2) instead. when I come back to page1, the data I filled out are all gone. Is there any way in HTML DB to force the submit in the current page after you click other page. If use JavaScript, what is code looks like.
    Appreciate your time and your answer.
    Mike

    Scott,
    just for clarity, if I understood correctly what you said there are two possibilities:
    1) keep the standard tab branch and give up the possibility of validating page items. Below you can find an example of such cases.
    2) Replace the template substitution string and perform a "custom" button-like submit also adding a branch to the main page associated with the tab. Page items will be validated if the branch firing point is set after the validations.
    I couldn't find an example of the latter, but I found easily an example of the former:
    it's the "Report attributes", page 420 of app 4000.
    If you enter 'aaa' in the "Number of rows" form field and then you press "apply changes", htmldb correctly displays an inline error message saying that the value must be numeric. On the contrary, if you click on the "Region Definition" tab, htmldb takes you to a page showing an oracle exception:
    ORA-20001: Error in DML: p_rowid=4785927011172906402, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value aaa for column PLUG_QUERY_NUM_ROWS
    Bye,
    Flavio

  • How to move floats to the next page?

    Hi All,
    Can anyone help me on this?
    How to move floats to the next page the same position?
    Thanks in advance

    @Learner – you can duplicate the object to the next page and remove the original.
    If the original one is anchored you also have to account for its position, because duplicating an anchored object will move it.
    Here an example for duplicating a selected object to the same page.
    //DuplicateAnchoredObject_SELECTION_SNIPPET.jsx
    //Uwe Laubender
    * @@@BUILDINFO@@@ DuplicateAnchoredObject_SELECTION_SNIPPET.jsx !Version! Fri Apr 12 2013 07:53:31 GMT+0200
    var sel = app.selection[0];
    var x = sel.geometricBounds[1];
    var y = sel.geometricBounds[0];
    //The duplicate() method without an optional argument:
    var dup = sel.duplicate();
    //NOW: the duplicated objects is at the inner border of the page
    //To move it to its original position we need the following:
    var xd = dup.geometricBounds[1];
    var yd = dup.geometricBounds[0];
    dup.move(undefined,[x-xd,y-yd]);
    That snippet can be enhanced for duplicating to a certain page, because the duplicate() methods can take arguments like "Page", "Layer", "Spread" etc. For details see the DOM documentation at:
    http://www.jongware.com/idjshelp.html
    One caution here: to make that work the way you want with facing pages, you have to take into account, that your coordinate system must be changed to "per page" by the property "RulerOrigin" of the ViewPreferences.
    This said, here is a working example for duplicating a selected object to page 3 of the current document:
    //DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx
    //Uwe Laubender
    * @@@BUILDINFO@@@ DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx !Version! Tue May 14 2013 10:11:29 GMT+0200
    var d=app.documents[0];
    var oldRulerOrigin = d.viewPreferences.rulerOrigin;
    var sel = app.selection[0];
    var x = sel.geometricBounds[1];
    var y = sel.geometricBounds[0];
    //In case of facing pages we change the ruler origin:
    d.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
    //Duplication of selected object:
    var dup = sel.duplicate(d.pages[2]);
    //NOW: the duplicated objects is at the inner border of the page
    //To move it to its original position we need the following:
    var xd = dup.geometricBounds[1];
    var yd = dup.geometricBounds[0];
    dup.move(undefined,[x-xd,y-yd]);
    //Restore the original ruler origin:
    d.viewPreferences.rulerOrigin = oldRulerOrigin;
    Of course, thiese snippets are working also with not anchored objects…
    Uwe

  • TS1702 How do you get past the FAQ page on free music downloads??

    How do you get past the FAQ page on free music downloads??

    "BSOsoft".  You really ought to practice asking coherent questions.
    If I have downloaded the same app as you, I'd guess tapping the button called "Download All Pro - Click Here to Download" which is right at the top of the FAQ screen might be as good a guess as any.

Maybe you are looking for