How can access data in rman output file "daily.log"
Hi All,
i did use following query for rman out
output file "daily.log" has been created,but does not exist data.
how can access data in output file "daily.log"
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Thu Jun 30 16:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to daily.log;
2> run
3> {
4> backup databas;
5>}
6> spool log off;
7>
Spooling started in log file: daily.log
Recovery Manager10.2.0.3.0
Starting backup at 30-JUN-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=634 devtype=DISK
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00014 name=/u02/proddata/a_int01.dbf
input datafile fno=00022 name=/u02/proddata/a_txn_data01.dbf
input datafile fno=00023 name=/u02/proddata/a_txn_data02.dbf
input datafile fno=00024 name=/u02/proddata/a_txn_data03.dbf
input datafile fno=00039 name=/u02/proddata/a_txn_data04.dbf
input datafile fno=00038 name=/u02/proddata/undo02.dbf
input datafile fno=00027 name=/u02/proddata/a_txn_ind03.dbf
input datafile fno=00028 name=/u02/proddata/a_txn_ind04.dbf
input datafile fno=00012 name=/u02/proddata/undo01.dbf
input datafile fno=00015 name=/u02/proddata/a_media01.dbf
input datafile fno=00025 name=/u02/proddata/a_txn_ind01.dbf
input datafile fno=00026 name=/u02/proddata/a_txn_ind02.dbf
input datafile fno=00029 name=/u02/proddata/a_txn_ind05.dbf
input datafile fno=00021 name=/u02/proddata/a_summ01.dbf
input datafile fno=00019 name=/u02/proddata/a_ref01.dbf
input datafile fno=00020 name=/u02/proddata/a_ref02.dbf
input datafile fno=00001 name=/u02/proddata/system01.dbf
input datafile fno=00002 name=/u02/proddata/system02.dbf
input datafile fno=00003 name=/u02/proddata/system03.dbf
input datafile fno=00004 name=/u02/proddata/system04.dbf
input datafile fno=00005 name=/u02/proddata/system05.dbf
input datafile fno=00006 name=/u02/proddata/system06.dbf
input datafile fno=00007 name=/u02/proddata/system07.dbf
input datafile fno=00008 name=/u02/proddata/system08.dbf
input datafile fno=00009 name=/u02/proddata/system09.dbf
input datafile fno=00010 name=/u02/proddata/system10.dbf
input datafile fno=00011 name=/u02/proddata/system11.dbf
input datafile fno=00013 name=/u02/proddata/a_archive01.dbf
input datafile fno=00036 name=/u02/proddata/sysaux01.dbf
input datafile fno=00016 name=/u02/proddata/a_nolog01.dbf
input datafile fno=00037 name=/u02/proddata/izu01.dbf
input datafile fno=00017 name=/u02/proddata/a_queue01.dbf
input datafile fno=00018 name=/u02/proddata/a_queue02.dbf
input datafile fno=00031 name=/u02/proddata/odm.dbf
input datafile fno=00034 name=/u02/proddata/portal01.dbf
input datafile fno=00035 name=/u02/proddata/sfx01.dbf
input datafile fno=00030 name=/u02/proddata/ctxd01.dbf
input datafile fno=00032 name=/u02/proddata/olap.dbf
input datafile fno=00033 name=/u02/proddata/owad01.dbf
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755196858_c1_s24_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:32:55
channel ORA_DISK_1: starting compressed incremental level 0 datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 30-JUN-11
channel ORA_DISK_1: finished piece 1 at 30-JUN-11
piece handle=/sw/weekly_cum_database_DEV_t755198834_c1_s25_p1 tag=WEEKLY_CUM_DAT
ABASE comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:02
Finished backup at 30-JUN-11
Spooling for log turned off
Recovery Manager10.2.0.3.0
Recovery Manager complete.
bash-3.00$
i did try this but it hangs
bash-3.00$ sh rmant.sh
Recovery Manager: Release 10.2.0.3.0 - Production on Fri Jul 1 10:52:01 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: DEV (DBID=45558086)
RMAN> Spool log to 'daily' append;
2> run
3> {
4> backup as backupset
5> incremental level=0 cumulative
6> device type disk
7> tag "weekly_cum_database"
8> format '/sw/weekly_cum_database_%d_t%t_c%c_s%s_p%p'
9> database;
10> }
11>
Similar Messages
-
How can I have a custom output file destination for each different preset?
Hey guys,
I have a bunch of presets in AME but I need to have each preset export to it's own folder. How can I do that? This was a really simple thing to do in Compressor but in Media Encoder is seems like I can only specify one output file destination for the whole application in general and everything gets exported to that folder. Can anyone help me with that please?This is a user to user forum. It is not staffed by Adobe employees so you will not always get a direct response from Adobe.
That being said, the output destination is not tied to the presets so this is not possible without a little extra work. You can change multiple output destinations by selecting multiple jobs and then clicking on one of the output locations to update them all. Another way to set this up would be to use watch folders.
This is a feature request are aware of but if you would like to add your vote for it, please add that request here: Adobe - Feature Request/Bug Report Form -
How can i delete old RMAN backup files
Hi All
We have configured RMAN backup for one of our clients PROD instance[10.2.0.3] in 2010 Dec.
Now my doubt is how can i delte old backup files of Dec and January, only this two months backup files only i need to delte.
kindly suggest me.
The parameters are :
CONFIGURE RETENTION POLICY TO NONE;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/ebiz/backup/PROD-%F';
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/ebiz/backup/PROD-%U';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/ebiz/oracle/proddb/10.2.0/dbs/snapcf_PROD.f'; # default
Regards
ShaikHello,
You can use this :
DELETE BACKUP COMPLETED BEFORE TO_DATE('01/31/2011 00:00:00','MM/DD/YY HH24:MI:SS');Regards,
Sylvie -
How can access a data member in constructor
hello,
I want to know that How can access data member of class in constructor of same class
Thnx
RakeshYou need to point it at
some object, like you do in newFile. What's in
newFile is fine, but newFile isn't called beforethe
doc= line.actually i have this a bigger program what i have
send before. i m getting a object of JEditorPane in
newFile() and asssigning it to epMain.
Thats why i want to access epMain's that value what i
have setted in newFile so i dont created a new object
and assigned in epMain as like
this.epMain= new JEditorPane();so how I can access epMain's that value what i have
setted in newFile()
here is actual newFile method
public void newFile()
Component comp=newEditPane();
JInternalFrame iFrame=makeIF(comp,"Untitled");
iFrame.setVisible(true);
if(iFrame.getDesktopPane().getSelectedFrame()!=null)
selectedFr=iFrame.getDesktopPane().getSelectedFrame();
Container iContent = selectedFr.getContentPane();
JScrollPane
jsp=(JScrollPane)iContent.getComponent(0);
JEditorPane
e=(JEditorPane)jsp.getViewport().getView();
this.epMain=e;
Hmmn... Rakesh you're so makulit. Do you know what null pointer means? Here read the docs API,
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/NullPointerException.html
You're displaying html using JEditorPane, why dont you try org.jdesktop.jdic.browser.WebBrowser?
http://java.sun.com/developer/JDCTechTips/2005/tt0505.html
Okie? ^_^
-Ronillo. -
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?
-
how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?
What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices. -
whenever someone sends me a file the Ipad labels it winmail.dat and wont allow me to open it...these are Word, Exce or jpgs. Does anyone know why this is and how to fix it? Also, how can you save attachments to a file on the IPad2
Is this a particular sender, or all of your attchments? Google winmail.dat and you will see a number of returns that can explain this, but in short, this is the way some e mail providers deal with attachments. If all of your e mail is coming that way, you need to change a setting on your isp set up. Perhaps stary here...
http://www.nytimes.com/2010/11/25/technology/personaltech/25askk.html -
I went to open Aperture and got the message that "Aperture can not be opened while it is being updated"..... I have thousands of photos in there and as soon as I can get access I will be dumping Aperture and moving to Lightroom. I used Aperture for all my photography work and only rarely used Photoshop. Aperture could handle just about everything I needed and now I can’t even access my OWN FILES? Bad move Apple, it looks like the last time I’ll ever buy Apple software.
How long do I have to wait till I can access Aperture? I have files to deliver to clients and they want them NOW!
Aperture Version 3
iMac (27-inch Mid 2011
OSX version 10.9.3
Processor 3.4 GHZ Intel Corei7
Memory 8 GB 1333 MHz DDR3I spent the best part of a day moving Aperture files onto a Glyph 6TB StudioRaid in the hope that I could open the files I need on my MacBook Pro. I get set up and then find that I can’t open any of the files because they are all Aperture 3.4.5 or thereabouts and the copy of Aperture that I have on the Mac book Pro is 3.2.4. It cannot open the newer version of the files. The MacBook Pro is running OSX 10.6.8 I can't upgrade Aperture on there apparently.
I then go back to the iMac and dump the latest copy of Aperture, re-install Aperture Version 3 and it tells me " You can't use this version of the application " Aperture.app" 3.0 with this version OSX. I'm using OSX 10.9.4 on the iMac. I have NEVER had problems with Aperture until this last incident.
Now I am in big trouble. I'll set up an appointment at the local Apple Genius bar and see if I can talk to someone tonight. -
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics. -
How can I explore the folders and files on my phon...
How can I explore the folders and files on my phone from my phone (lumia 920)?
the file system including all the data pertaining to that partition is closed on windowsphone8, unlike that of Symbian.
the only part you will be able to see is what you would see in this post here: /t5/Nokia-Lumia/Transfer-file-for-920/m-p/1605954#M24335
the rest is locked unless you have developer access, and even then not much as you would just use the SDK to make your applications. -
How can i do a RMAN backup of my database from the network ?
i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus -
How can I locate my iTunes library files? When I click on my iTunes icon rather than my iTunes files I receive, " The file iTunes Library.itl." cannot be read because it was created by a newer version of iTunes." I have already tried to update my iTunes program.
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
How can I share a *.java source file across multiple projects in NetBeans?
I'm sure this simple and a pretty common operation but how can I share a *.java source file across multiple projects in NetBeans? Right now I keep cut, coping and pasting the same source file between multiple projects to re-use the same code. But I could I make this source file a library file or something like that so that I could access it from any project. I assume this would be a generic operation but I mentioned NetBeans for clarity. Thanks.
fiebigc wrote:
I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
>I know I mentioned NetBeans but I'm most interested in the generic method for creating a library of source files that I can call into whatever program I am developing. I've done such a thing in C using header files and such but I'm trying to get a direction on how this is accomplished in Java. I'm sorry if I could edit the title I would. If anyone wants to be specific about NetBeans I welcome that too.
Edited by: fiebigc on Jun 20, 2008 5:57 PM
Create a class library.
Write your code, compile it to .class files, put those class files in a .jar file and include the jar file in the classpath whenever you want to compile a project against it. -
How can I transfer all of the files from my old iPhone 4S to my new iPhone 5?
how can I transfer all of the files from my old iPone 4S to my new iPhone 5?
Download the media content from an iTunes library or the iTunes Store, and follow these instructions to transfer your personal settings and data.
(83108) -
How to write data to an XML file present under application server
frnds: can ne one tell me, how to write data in to a file, which is present under a application server
Ex: i want to write a string data in to a file test.txt which is present under "http://localhost:8080/<some_webapp>/test.txt"
Note:i have deploted a service<some_webapp> under Tomcat/webapps dirVery simple. A servlet can writes to that file if it has the good rights.
In the servlet get (or post) method, use a code like this:
import java.io.*;
protected void doGet(HttpServletRequest req, HttpServletResponse resp) {
try {
String filePath = this.getServletContext().getRealPath("/text.txt");//See http://java.sun.com/products/servlet/2.2/javadoc/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
PrintWriter writer = new PrintWriter (filePath);
//or BufferedWriter out = new BufferedWriter(new FileWriter(filePath));
writer .println("aString");
writer.flush();
writer .close();
} catch (Exception e) {
e.printStackTrace();
}Hope That Helps
Maybe you are looking for
-
How to use Dual monitors with G5 Mac; And... How can the image in "Develop" be made to look like
Two questions: How can I use my dual monitors on my G5 Mac? How can the image in "Develop" be made to look like what it will print, just as it is done in Photoshop with view>proof setup.
-
SQL Loader failure after migration from 9.2.0.7 to 10.2.0.3
Hi, The following is the error comming up when trying to load the data using SQL Loader in 10g. **SQL*Loader-704: Internal error: ulnain: error occurred on good insert [-1]** **SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
-
Trouble installing w/ Adaptec 2940UW and Seagate ST19101WC
I am running a home built PC w/ an Adaptec 2940UW SCSI card and a Seagate ST1901WC SCSI hard drive. I have loaded and removed Redhat 6.1, Windows 2000, Windows 98 SE. I know that the hardware is installed properly. When I try to load Solaris 8 for In
-
Touchscreen stops working within an app
I've only owned my iPad for a few days, but this keeps happening, usually in the App Store, but sometimes other apps. After a while, some (not all) of the touchscreen buttons in an application stop responding. I can remedy this by forcibly closing th
-
How do I disable check for updates automatically for a silent install
Does any know what the msi parameters are to disable the check for updates automatically. I have tried the following autoupdatecheck 0 ju 0 update 0 These do not seem to work as the update tab and check and uncheck is still available Also Does anyone