How can avoid mandatory fields in data transfer

hai
please respond me
how can avoid mandatory fields in data transfer like bdc

hi,
u have to pass values for mandatory fields in bdc method, u have to prepare u r bdc data such a way that all the mandatory fields are filled, other wise it will give error

Similar Messages

How to avoid mandatory fields popup when cancelling a transaction

Hi All,
I have created a Employee create page and put some mandatory fields on it
and have 2 buttons apply and cancel . if i navigate to that page and not enter anything and press cancel button a dialog comes up asking me to enter mandatory fields
what should i do to avoid that popup ?
thanks
ananya

Either
1) disable client side validation on press of cancel button
2)Or Don't mark the fields required and handle this in ur code on apply button event as server side validation.
--Mukul

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

ICloud storage space used up by old data from 1st gen iPad I traded in nearly 2 yrs ago for an iPad Mini. Can't backup any info for mini or new 6 plus. How can I access this old data to clear it out?

My iCoud storage space is being used up by old data from a 1st generation iPad I traded in nearly 2 yrs ago for an iPad Mini. The people at the sprint store where I made my trade were supposed to transfer everything over from my old iPad to the new Mini once they backed up the old device to iCloud. Well, long story short, none of the data ever got transferred to the new iPad, but it all got backed to iCloud, eating up all my storage space. Here I am almost 2 years later, and I've never been able to back-up my iPad mini. What's worse, My iPhone 4 wasn't backed up that whole time, and now I can't back-up my data from my new iPhone 6 Plus to iCloud either. Trying to find creative ways to store and save my information and data between all my devices is getting to be ridiculous. I don't want to upgrade my storage space though...just want to clear out a great deal of what is already being stored. How can I access this old data to clear it out?

The only way to access data from an iCloud backup is to restore it to your device. You could, for example, back up your iPad mini to your computer using iTunes (by connecting it, opening iTunes, then going to File>Devices>Back Up and choosing to back up apps and transfer purchases when prompted), then erase it and restore the old iPad backup (as explained here: iCloud: Restore or set up your iOS device from iCloud), save any recovered data you want to keep, then restore your iTunes backup back to your iPad mini (by connecting it to your computer, opening iTunes, then going to File>Devices>Restore from Backup).
Once you're done with the old backup, delete it from your account to free up the space.

How can I set the insert date to auto update in Pages 5.2.2

how can I set the insert date to auto update in Pages 5.2.2
I am attempting to have the date in header auto update in a Pages file.
I can insert it, but where is the AUTO UPDATE selection
OS10.9.4
thank you

Apple never included the auto-update feature for dates in Pages v5.2.2. You would have to single-click the date, and deliberately update it.
If you have Pages ’09 v4.3 in /Applications/iWork '09, then it will allow you to configure auto-update of the date field. Right-click on the date, set the format, and click the selection for automatically update on open.

HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE

HAI,
         HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE
         HOW CAN I COME BACK FROM 5TH INTERACTIVE REROT TO 2ND
INTERACTIVE REPORT.
THANK YOU.
ASHOK

Hi
Write some code in the program to come to 2nd list from 5th list
if sy-lsind = 5.
   sy-lsind = 2.
endif.
for field symbols see the doc
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

How to hide mandatory field in OAF page through personalization

Hi,
Could u please help, that how to hide mandatory field in seeded page.
This could be achieved through personalization only.
Thanks,
Ramachandra.
Edited by: 927747 on Jun 21, 2012 2:16 AM

yes you can hide that field by simply set the render propert to "false" using the personalization.
Regards,
Vijay Reddy.

How can i migrate oracle database data to DB2 database

Hi
how can i migrate oracle database data to db2 database.
can anyone provide me solution.

BTW why do you want to migrate oracle database data to db2 database? Any specific project requirement like Parallel run with Oracle database (e.g data replication)? Or any other issues - Cost? Manageability? Availability? Business requirements?
Do you need to do a day-to-day data transfer or it is for permanent migration?

Hi, can you help? My emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

Hi, The emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

That's very scary. They might do it, but I personally have never had Apple contact me re id's except on their site when signing in. I suggest you DO NOT respond until you have a phone conversation with Apple security. They can verify if they sent you the e-mail and why.
While it's very possible it's true,again, I suggest you not respond until you speak to someone at Apple. I've often read here that when people sign in they are not allowed to because "someone else has used the id" type of statement.
Also, you should be able to go to the app store and see what apps you have downloaded.
Though it could have been a free app, have you checked to see if any were bought with your id account?
I've gotten these types of e-mails from places like USPS and FedEx which look amazingly authentic and were from their website. I also received an odd e-mail from my cousin in Ireland last year that clearly was not from him. It was also sent to others in his family in Ireland. I e-mailed him that I only opened it because it had a .ie, but suggested he change... Days later I received mail from 'him' - same name, but at yahoo.com.
Again, I would call Apple. You can also report it at [email protected], but I would not settle for that given your situation. If nothing else, call Apple sales (sales depts. anywhere answer fast) and ask them to transfer you to security. Apple will not want anybody accessing their name, and while it's unlikely, it's not impossible that it is someone phishing.
Hope this helps and can you let the support community know your results by posting on this thread when you're done? Thank you.
Hope this helps.

How to avoid multiple copies of data in page refresh

How to avoid multiple copies of data in page refresh

If you are talking about a page with an insert query, ignore the fact that it's a page refresh. It's just another way that someone can insert duplicate records. I like to handle this in my insert query.
insert into thetable
(f1, f2, etc)
select distinct
value1, value2, etc
from some_small_table
where you don't already have that record

My desktop pc has died and I have not backup up I tunes for months. If I install I tunes onto my laptop is there a way I can avoid losing all my data since my last backup?

My desktop pc has died and I have not backup up I tunes for months. If I install I tunes onto my laptop is there a way I can avoid losing all my data since my last backup?

You should be able to:
Backup the device to the new windows installation
Transfer your purchases into a newly authorized library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
When you get it all fixed, make a backup!
tt2

How to avoid a line of data being cut by page jump ?

Dear Java Experts,
I have encountered a very troublesom problem!
The problem is described as follows:
When the browser (IE or Netscape) contains many HTML character data (especially HTML tables and data from DATABASE), how can I print the data to client's printer
(i.e. browser's printer) without having a line of data cut by page jump?
That is how to avoid a line of data cut by page jump, upper part of the data in one page and lower part in next!
I think the problem should be solved with client's java applet!
Can any expert give me sample code to solve the problem or indicate me where I can find documents about solving the problem?
Thank you very much in advance!!
Best Regards,
Jackie Su

HTML is not really meant for device-specific presentation (despite a lot of abuses in this area).
I don't think you're going to solve this satisfactorily with HTML, no matter what you jury-rig around it.
If this kind of presentation control is a requirement, you're probably better off with a format that directly supports this--PDF is the most obvious choice.
There's a sourceforge project that supports PDF generation from Java (http://sourceforge.net/projects/itext/ - I don't have any experience with it) and I think there may be others.
And I believe there are also commercial products for this.

How can I pass field value betwen view in ICWC?

Hi experts,
I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0
Hope can get some advices and helps here.
I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also the same field name to context note CUSTOMER in BupaCreate view.
I have added the field into both the HTM views and able to execute thru WebClient. However, I have one problem in passing the <status> value from BupaSearchB2B view to the BupaCreate view when I click on the 'create' button.
I do search and saw this thread How can I pass field value beetwen view in IC Web Client? , but i cant figure out how it works.
Do I need to create the field <status> to context note CUSTOMER in BupaSearchB2B? Currently the context note does not have any attributes.
Really appreciate for any help.
Edited by: mervyn tay on Apr 7, 2009 11:42 AM

solved by myself...
code in the CREATE_ACCOUNT method.
ev_entity->set_property( iv_attr_name = 'ZZICNO'
iv_value = lv_icnum1 ).

How can I sort lines of data (alphabetically) in the new pages 5.0?

How can I sort lines of data (alphabetically) in the new pages 5.0?
It was very simple to do in the previou version of pages.

I'm not sure why people are torturing themselves with Pages 5 given the nearly universal outcry on this forum and the incredibly negative reviews elswhere, such as the App Store.
Pages 4.3 should still be in an iWorks folder within your Applications folder. Just use that.
Please remember to tell Apple what we need from them at:
http://www.apple.com/feedback/pages.html

How can avoid mandatory fields in data transfer

Similar Messages

Maybe you are looking for