How can Get SAP SYSTEM MESSAGES Dynamically
i developed a report program and from that call one bdc program and pass the data to that. I can get bdc messages but how can i get SAP SYSTEM MESSAGES dynamically if possible how to store it.
thanks in advance,
your reply will get good points.
From Maran,India.
Hi Maran,
You can use the followin code after call transaction;
Make sure that u add the message option during call transaction
DATA: i_messtab TYPE TABLE OF BDCMSGCOLL.
CALL TRANSACTION p_tcode USING p_bdcdata
OPTIONS FROM l_params
MESSAGES INTO i_messtab.
LOOP AT i_messtab INTO wa_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = wa_messtab-msgid
lang = sy-langu
no = wa_messtab-msgnr
v1 = wa_messtab-msgv1
v2 = wa_messtab-msgv2
v3 = wa_messtab-msgv3
v4 = wa_messtab-msgv4
IMPORTING
msg = l_message
EXCEPTIONS
not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Saji.
Message was edited by: Sajith Hari
Similar Messages
-
How can i display system messages(forms,rep) in prefered language
I want to display returned messages from the system,on reports,charts,Forms buttons in users preferred language. How can i dot that
Thanx in advanceHi,
If you want to display your own message then you add those messages in a table wwnls_strings$. The strings you insert should be in a different domain like 'userdefined'. Please describe the table to know more about the table. You can then use get_string
wwnls_api.get_string(
p_domain => 'USERDEFINED',
p_sub_domain => p_sub_domain,
p_name => p_name,
p_language => wwctx_api.get_nls_language,
p0 => p0,
p1 => p1,
p2 => p2,
p3 => p3);
Thanks,
Sharmila -
I am trying to access a message from early 2012. When I load previous messages It will only go back to oct 2012 and then the program stops and kicks my to the home page. Anyone know how I can get to the message? Thanks.
Try Spotlight Search
1. From any Home screen page of iPad, drag your finger down anywhere on the center of Home screen.
2. Spotlight search will now appear and you can search for apps, texts, or any other content you'd like just as you did on previous versions of iOS. -
When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?
Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance. -
While composing email, keep getting "Unable to save as a draft" every 30 seconds. I've disable auto save and it didn't help.How can I stop this message?
Mike,
Thank you for taking the time to look at my app. This is my last major stumbling block that I have to resolve for this and other forms in the app.
Actually, I did use the Form Wizard for Auto DML to originally create the form. It was great. It created most of the Buttons, Items and Validations automatically (basically most of the page). I just needed to create some Processes and Computations. Two of which were the Processes to update the 'create_dt' and 'created_by' fields and 'update_dt' and 'updated_by' fields. The Create process updates the fields just fine.
However, my problem seems to be that the Hidden 'create_dt' and 'created_by' fields aren't picking up the values from a record that is being editted. Then when I attempt to save the record those fields are NULL, causing the DB NOT NULL constraint to throw an exception for those fields. In the back of my mind I seem to remember seeing some post stating something to the effect that the information in fields with a Source Type of Database Column is just displayed and does not affect Session State items.
Even with that, I am still wondering just why the 'created_by' Page Item shows the value that is in the DB record being updated, but the 'create_dt" does not (as can be seen in my first posting). It is the 'create_dt' Page Item (:P205_CREATE_DT) not having the DB records 'create_dt' info in it that appears to be the problem.
Thanks,
Tom -
when i try to delete my messages it turns my imessage off so i have to restart my phone to get it to work again, by then all my messages have come back which i deleted... how can i delete old messages i dont need anymore withou imessage going off?
To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39 -
All contacts appear in messages but not phone. How can get them back on phone?
all 300+ contacts appear in messages but only 52 appear on phone contact list. How can get them back on phone?
Welcome to the Apple Community.
What do you mean you have them in iCloud, do you mean you have an iCloud back up, or the contacts are still available at iCloud.com -
How to get the byte[] size dynamically from the StreamMessage object
Hi all,
Using JMS, I am receiving the FDF file as StreamMessage from the queue and attaching it to the PDF file which is present in the local system.
For that, I have written the code as follows:
{color:#0000ff} Message msg = jmsTemplate.receive();
if(msg !=null && msg instanceof StreamMessage)
StreamMessage message = (StreamMessage) msg;{color}
{color:#ff6600}//hardcoded the byte array size value
{color}{color:#0000ff} byte[] bytes = new byte[{color:#ff0000}856{color}];
System.out.println("read msg="+message.readBytes(bytes));{color}
{color:#0000ff}PdfReader pdfreader = new PdfReader("D:\\Managing_Workflows_No_Comment.pdf");
PdfStamper stamp = new PdfStamper(pdfreader, new FileOutputStream("D:\\12345.pdf"));
FdfReader fdfreader = new FdfReader(bytes);
stamp.addComments(fdfreader);
{color} {color:#0000ff} stamp.close();
{color}{color:#000000}The above code is working fine except with the hardcoded of {color:#ff0000}byte array{color}{color:#ff0000} size value{color} which is given in {color:#ff0000}RED{color} in color.
Can anybody know, {color:#000000}*how to get the byte[] size dynamically from the StreamMessage*{color} object ?
Any help would be highly beneficial for me !!!!
Thanks and Regards,
Ganesh Kumar{color}When you create your stream message you could add an property to your message, something like streamSize that would contain the number of bytes in your stream message. Then you could get this property from the message before declaring your array.
Tom -
How to get custom defined messages in WAD
Hi
can you please help me how to get customized error messages in WAD.
While I'm executing in RSRT the customer exit variable throws error message saying that 'No Sales orders exist for this Sold_To Party' but when I execute same query using Bex WAD, then no error message throwing for me for given sold_to party. I tried with all options as given in below code, but WAD gives me system error that "No values found for the customer exit variable 'Zxxxx'. Please help me in this regard. Should I do any settings in WAD to get custom defined messages. Kindly let me know
my code is as below
I_STEP = 2.
CASE i_vnam.
WHEN 'Custome exit variable'.
IF sy-subrc = 0.
ELSE.
MESSAGE e060(/bmc/bw). "No Authorization exist
g_errflag1 = 'X'.
exit.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = '/bmc/bw'
i_type = c_e "'E'
i_number = '061'
i_msgv2 = l_msgv2.
RAISE NO_REPLACEMENT.
l_s_range-low = g_soldto.
l_s_range-sign = c_sign_i.
l_s_range-opt = c_range_opt_eq.
APPEND l_s_range TO e_t_range.
ENDIF.
I_STEP = 3.
READ TABLE i_t_var_range INTO w_s_var_range
WITH KEY vnam = 'customer exit variabel'.
IF sy-subrc = 0.
Check the flag and throw message 'No Sales orders'.
IF g_errflag1 = 'X'.
l_msgv1 = 'No Sales orders'.
Call the FM to populate message
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = c_r9
i_type = c_e "'E'
i_number = c_000
i_msgv1 = l_msgv1
EXCEPTIONS
dummy = 0
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
RAISE NO_REPLACEMENT..
ENDIF.
Thanks & Regards
siluHi
Custom Messages WAD -
Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan RHii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull. -
How can I send whatsapp messages using Siri ?
Hi,
How can I send whatsapp messages using Siri ? or how can I ask Siri to read my whatsapp messages ?
thanks for help!kladrian wrote:
this is not the case in particular
Yes it is. If it wasn't the case, then why are you asking the question to begin with?
why everytime I have a question about a simple activity present in Android system I get in response ... "you can't sorry" !?
1. Because iOS is not Android
2. Because it's the truth, whether you like it or not -
Hello Everybody,
Well, I need to do an application to get all system messages and filter the messages I will need. The application run lotusscript codes from a Notes database, the application just do a database instance, choose the lotus agent and run it. What I need is get all those messages that will come from the lotus agent. I done a piece of the code to redirect all System messages for a file:
printStream = new PrintStream( new BufferedOutputStream( new FileOutputStream("OutFile.txt") ), true );
System.setOut( printStream );
System.setErr( printStream );The messages from lotus agent continue goes to console.By the way, this code can not get the messages from lotus agent, I guess with JMS I can intercept these message. My doubt is: Can I do it with JMS? If so, Could you advise me, please?Don't bash csh!LOL!I'm glad some people like puns. Some of my friends do, some can't stand them!
I don't know ksh. Our target system uses it--makes me type a lot, because I don't know how to use ksh
history as well as I can use csh history. That's just setup though--must of it runs as a GUI.I don't like ksh either. Never had much luck with its history.
I use bash and zsh. Both have csh-like history, plus arrow key command recall.I don't think I've used either. I don't even think we have them on our system [from a quick check] (not sure I'ved heard of zsh before). I used to use tcsh (which had arrow key command recall) in college, but then some of my jobs didn't have it, so I learned csh history, and can do quite a lot. Confuses some people, but is really quite easy once you get the hang of it. The system administrator at my first job did all sorts of things with sed/awk/nawk/etc.--drove everyone nuts, because no one knew what he was doing. I can do basic sed, and can use awk/nawk if I read the man page.
Considering all the C programming I've done, you'd think I'd like the csh family more, but for some
reason I ended up gravitating toward bash and the more I used it, the more I didn't want to switch to csh.Yeah--I stuck with what I learned first, since it does the job. I don't do shell script programming much, so I don't need to know too many gory details of that. I can do the "foreach" on the command line. I learned vi well in college, so I later never felt like learning emacs (even a console version). So, I do everything in vi now. I push a few extra escape and append characters sometimes if I have to write an MS Word document, but I like vi for my code editing. I tried typing Dvorak for a while when my job was writing requirements in MS Word. It worked well on my split keyboard, but couldn't adjust to a flat keyboard I got stuck with for a while. And vi and Dvorak just don't mix...so I'm back to QWERTY. -
SAP System Message: Syntx error or generation error in a screen
dear sap basis gurus,
i am currently having problems signing on to our DEV server. i get this error message:
<SID>: SAP System Message
Syntx error or generation error in a screen.
it won't let me log on.
there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
have you encountered this problem before? please help me as there we have two imminent go-lives.
thank you very much in advance.
best regards,
alberthello nick, ashok,
thank you very much for your responses.
i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
i hope i would no longer encounter the error message.
again, thank you.
best regards,
albert -
public class Userdefined extends Exception {
Userdefined(String sparam){
System.out.println(sparam);
Userdefined(){
private static int acno[]={100,105};
private static double bal[]={100.00,200.00};
public static void main(String args[]) {
try{
for(int i=0;i<2;i++)
System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
if(bal[i]<150.00)
Userdefined udexp=new Userdefined("bal less");
throw udexp;
catch(Userdefined e){
System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM -
How to get the system info in a network
Hi to all.
can any one tell me how to get the system related,like system name and logged user ,info in a network using java...
thnx in advance,
ashokThere is quite a bit of data that is stored in the System Properties. Run this little test app and it'll display all of the System Properties, what you are looking for may be contained in there:
public class Test {
public static void main(String[] args) {
System.getProperties().list(System.out);
}
Maybe you are looking for
-
POPUP after selecting button in ALV
Hello everyone. I have an ALV (called with FM 'REUSE_ALV...') with a gui status of its own. I added a new button that must popup a window with information on some variables i just ended calculating. I allready tried using 'call screen' and the comman
-
I purchasedt an iPod touch from Best Buy yesterday. I loaded for apps from the App Store Dragon NaturallySpeaking Skype Spotify Facebook. All of these programs worked fine yesterday when I installed them. I start it up today I try to activate the
-
CURRENT_DATE in Date parameter
Hello guys! I'm trying to put the CURRENT_DATE as default value in my date parameter. I'm working on Publisher 11g Data model. It is possible? If not, any workaround? Thanks for your time! Regards, Ariel
-
Application Loader can't recognize my username
I'm on Barnes & Noble trying to download a .epub book. The .epub goes to my Download file and when I click it Application Loader pops up asking for my Apple ID and password. It says it cannot find a registered user with my user name. I don't know w
-
Use same transaction in entity-bean and Datasource
Hello I've got following problem. In my stateless container managed transaction Sessionbean i do some inserts and update on my container managed entity bean. In the same transaction I have to read some informations on the database. Some of those info