How can I access RFC data in transaction? (SAP to MII rfc calling)

If I keep the incoming RFC calling by message rules with category, then using the message actions to handle, that is a solution.
But if I want process the incoming RFC data in transaction directly, how can I get these data?

You will need to define an XML typed Transaction input property for processing the message synchronously. Then in the processing rule for this message you need to associate the proper transaction and map the parameter.
So essentially the transaction and input parameter mapping in your message services processing rule replaces the category setup that you already have working.

Similar Messages

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

How Can I Access Library Data on External Drive ?

i bought an ssd upgrade kit and had an apple tech install the ssd
i formatted and did a clean usb install of mavericks
i then put the standard 5400 drive from the mini into an external usb case
it all works great
but i cannot access the library files on the external drive
obviously if i hold option and go to "go" in the menubar, it takes me to the library on the new drive
how can i access library files (i need to get at the application support files for 1password) on an external usb drive ?
thanks

Open the folder containing the library, choose Go to Folder from the Go menu, and provide either Library/ or Library/Application Support/ as the path.
(93967)

How can I access the data on my time capsule remotely?

I see the drive under the shared tab in Finder, but I cannot open it. I am at school and need to access documents that are stored on my time capsule at home. When I set everything up, I enabled "sharing over WAN" and everything and set up the password access. The software is up to date. How can I get into my drive? I tried logging into icloud.com, but the only apps I see are the standard contacts, notes, etc. HELP!!!!!!!

You need to follow the BTMM via icloud instructions.
http://www.apple.com/support/icloud/back-to-my-mac/
There are plenty of other ways to do it.. but issues to do with Apple not using a dynamic DNS client so if your ISP does not allocate you a static public IP there is no way to find it, if the public ip rotates as they are designed to do hourly or daily.
Do a google search, remote access time capsule..
Or use the more like this on the right hand side... there are plenty of posts and even youtube video which go right through it.
BTW your school system may simply block the port.. if I was a school IT admin.. I would. You are dragging files across to the internal school network bypassing the firewall.. that is unacceptable risk to the whole school system.

Managed Metadata fields using "entire path to the term" - how can I access this data?

We are trying to make it easier for our users to enter metadata, so the hierarchy is really useful and we can display it as the "full path to the term".
eg. country, region, town
But there are times when we need an individual piece of data like region.
Calculated fields do not work. :-(
So I have been trying to access the data from a SharePoint Designer Workflow.
But - I can only get to the leaf node element - the last value from the selection.
Does anyone know a trick to get the full hierarchy string of Country-region-town???
Many Thanks
Ruth
Ruth, UK

Hi Ruth,
Per my knowledge, there is no OOB way to retrieve the entire path of the managed metadata column value.
However, you can use the code sample to get the Managed Metadata Hierarchy, please refer to the link below:
http://msdn.microsoft.com/en-us/library/ff823725.aspx
More reference:
http://zimmergren.net/technical/sp-2010-introduction-to-programmatically-working-with-taxonomies-in-sharepoint-server-2010
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How can I access worksheet data in JSP

I have gone through documentation given on the oracle site and found that worksheet can b exported to html or excel file, but my requirement is that I have to display the content of the worksheet to the client in a JSP page.
How can I do that????????

You will need to define an XML typed Transaction input property for processing the message synchronously. Then in the processing rule for this message you need to associate the proper transaction and map the parameter.
So essentially the transaction and input parameter mapping in your message services processing rule replaces the category setup that you already have working.

Satellite U400-124 - Vista don't boot so how can I access the data?

I have a problem with my U400-124 when it loads Vista. It has a blue screen error when trying to start windows. It comes up with the boot repair program but that does not work. Therefore I have a question, unless someone can help with the above.
I have the restore discs but I have to get some data off the hard drive. Is it possible to remove the hard drive, place in an external case and copy the data I need. Then place the hard drive back in and start the restore process?
Many thanks in advance.

Yes, this is no problem and you can do this.
I did the same on my Satellite notebook. Its pretty easy because the HDD is removed in few minutes and so I can backup all my data on my other notebook.
Such USB 2.5 SATA HDD adaptors are not expensive. Ask your local computer dealer or search on eBay. I bought my adaptor from eBay.
Good luck!

How can I create tables (data dictionary) on SAP Environment in BATCH mode?

I need a Help on Table Creation on SAP in Batch Mode. I don't want to use SE11 and manually enter all 2000 table definition in the Front END. Is there any way where I can create a tables on SAP in Batch MODE. I want to create around 2000 tables, where schema is generated from external source. As we know table created from Native SQL will not be available in SAP Application Layer.

Hi Kenneth,
Which version are you in? I'm on 4.7 and i have the class on my system.
You may even try using the Function module that i had mentioned in my earlier post. That might solve your problem.
Please write back if you problems decides to have a date with you.
Thanks, Debasish

How can I access to the data?

Hi,
I am newbie in WebDynpro.
The WebDynpro is deployed in WAS. The WAS, I think, can be installed together to a R/3 or not. Is it correct?
How do I access to data in my web dynpro? RFCs? SELECTS? Web Services?
Regards,

hi......
Well it is not necessary ti install WAS always with your NWDS, NWDS can be installed separately and then the projects created in NWDS can be deployed in one WAS as long as you know the SDM password of that WAS. This i guess answers your first question. TO deploy your webdynpro project in one was, open the NWDS,
Window>preferences>SAP J2EE engine
There you can enter the name of the WAS. IF it Local Server, Select "SAP J2EE engine is stored on local host". For more information right back.
Now to connct to backend from Webdynpro,
You have use "ADAPTIVE RFC's" or BAPI. But before that the JCO(java connectors have to be configured).
Follow the link below, for Adaptive rfc, it is a pdf which gives everything in detail
[https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20archive/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf]
Foe webservice,
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/301ff0bb-74ca-2910-fa99-eae392695aad]
For further queries, write back

How can I access Address Book data from an older version of the application to transfer it to a newer version of Mac OS running on a second hard drive on the same MDD G4?

I installed a hard drive from one PowerPC Dual 1.25 GHz MDD into another one with an older version of the OS X. all my Address Book data are on the older hard drive, from which I now boot the computer. When I launch Address Book as an app on the hard drive with the newer version of the OS, I get an error message that says I cannot run the version of Address Book from the older hard drive on the newer OS. How can I access the data on the older hard drive version of the Address Book app so that I can transfer it to the newer version of the app on the boot drive? The "Import" functionality will not work. I will be grateful for any help I can get. I would also like to uninstall the older version of OS X from the older hard drive.

Boot from the older version of OSX, then in AB use the File>Export>Export vCard after selecting all in AB.
Then boot from the new OSx & use the new AB to import that VCF file.

How can I access the Attribute Values from the Search Region

Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjith

you could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth

Can't access personal data on OEM partition

My laptop comes with a SSD and a normal HDD. One fine day I switch on my computer and it says 'Insert bootable device' I thought that my SSD had crashed and since it assumed it had the OS I wasn't able to boot into Windows. So I removed the normal HDD put it into an enclosure to retreive my personal data. The HDD (750 GB) has three partitions, one is a Lenovo partition (29.30 GB) with applications and drivers and there are two OEM partitions (14.75 GB and 655 GB). I presume all my data is in the 655 GB OEM partition and I can't seem to access it. How can I access the data on OEM partition and recover my personal files ? Any advice/suggestion would be welcome.

Hi
I think that the os might be on the hdd(655gb) partition and as it has been marked as a oem partition, bios is not able to access the boot files on the c drive. Since data comes first, use ptedit32.exe to change the partition type of 655gb partition to 07 from 12 and then assign it c you might have to reboot and then you could copy the data from the hdd and keeping the partition unhidden, try to boot from it in laptop.
Link for ptedit32.exe
http://www.2shared.com/file/TbV75uyo/PTEDIT32.html
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

I unfortunately just got my IPhone 4s stolen.I thought I had the find my iPhone enabled but I didn't because I cannot locate the phone when I sign in ICloud.How can I erase all data on the phone so the thief can't access my personal information.

I unfortunately just got my IPhone 4s stolen.I thought I had the find my iPhone enabled but I didn't because I cannot locate the phone when I sign in ICloud.I have a password on the phone but i'm not sure if I turned on the option where the phone resets if you incorrectly put the password more than ten time. I immediately called my phone company (Verizon) and reported the phone stolen.So I know whoever took the phone cannot place calls or use the phone. But can they still access my data on the phone if they manage to unlock the phone? If so how can I erase all data on the phone so the thief can't access my personal information? is there any other way other than Find my IPhone to wipe off the data on the phone? I really don't want my personal information such as pictures, text messages, notes and social networks profile available to a stranger!!? Help please!!!

Hello thewrongway,
I'm sorry to hear about your phone! I understand the need for an active device. You are able to activate an old device and process an insurance claim for your iPhone 4s within 60days from the incident date. Keep in mind if the old phone is not a smartphone and you currently have unlimited data that feature will fall off. If you have a tier data plan no changes will be made. Please let me know if you have any additional questions. Thank you.
TominqueBo
VZW Support
Follow us on Twitter at @VZWSupport

How can i view the data from Access DB in oracle

pls tell me that how can i view the data of MS ACCESS DATABASE in ORACLE.i was use ODBC of ACCESS DATABASE AND THEN CREATE DATABASE LINK IN ORACLE BUT NOT YET SUCCEEDED.PLS TELL ME THE PROCEDURE.
regard's

hi,
u nedd to use Oracle Hetrogeneous Services,,
full details of the procedure u may fing on metalink
Regards

How can I access RFC data in transaction? (SAP to MII rfc calling)

Similar Messages

Maybe you are looking for